[BO XI 3.1] BO Designer not starting after installing SP5

Hello All!
I installed SP5 on top of BO XI 3.1 SP3 (Windows Server 2008 R2 64bit) on server. There is an issue that Designer is not starting. The process designer.exe shows up in "Task manager" for 1-2 second and disappear. No entries in Event Viewer and in BO logs. I also installed SP5 on client desktop machine and the same happens.
Do you have any tips/advices? Thanks for that!
Bartosz

Hello,
we are not aware of such type of problem and it is most likely something peculiar to the configuration or architecture of your deployment.
I would analyze trace logs from Designer and from Process Monitor ( [http://technet.microsoft.com/en-us/sysinternals/bb896645] )
My advice is to open a support message because is a complicated investigation that probably will need some remote support as well
Thanks
Best regards,
Simone

Similar Messages

Windows 8.1 is not starting after installing Bluetooth driver

I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
It was perfect before installing RaLink Bluetooth Driver update.
I use "HP ENVY 15 Touchsmart j001tx" laptop.
Please have a look on this articles also:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
Further information:
HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
Sushovan Mukherjee

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Game does not start after installing on mac pro

Game does not start after new install on mac pro ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

IPod service manager will not start after installing iTunes 10

iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?

Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

Itunes will not start after installing 10.5 Windows DEP error XP

Have not found a definitive fix for this anywhere.. so will try posting again.
Having upgraded to itunes 10.5... now Itunes will not start. Just get Data Execution Prevention error, and closes. Using Windows XP. Have tried repairing itunes, removing it reinstalling, removing and reinstalling Quicktime.. (Quicktime works fine). Disabling DEP for itunes.. re-enabling doesn't make any difference either way. Tried different profile.
Please help!!

Same problem here!

CSA : Cluster not started after installing CSA 6.0.0.209

After installing CSA 6.0.0.209 on Win2003 Server,
the cluster service is not started.
The server said that the network connection service is not started.
The CSA is registered in the Management Center.
And the group is in LEARN MODE.
What is the source of this problem?

First off, do you get any events from that machine in the csamc ? If not, does it solve the problem if you disable csa and try to start the cluster service ? If so, then you could have a deny rule that has no log (even though that is highly unlikely if you are using the default policies) Also what clustering software are you using, microsoft or some other 3rd party sw ?
Jan

Oracle web tier install+config: opmn does not start after install

Centos 5 box.
After a silent install of web tier 11.1.1.2 opmn will not start. The installation was "complete" but I found some errors in the various log files.
When I try to start a process (for example) using opmn this error occurs in the log file:
[2011-03-31T16:31:49][opmn][TRACE:1][][OPMN]Failed to open wallet (file:/apps/oracle/orahttpserver/as_1/instances/instance2/config/OPMN/opmn/wallet) [default password] (28759)
Command line says unexpected error, code 512 or something to that effect. The given wallet directory is empty.
Checking back through the install & configure logs:
java.lang.NoClassDefFoundError: oracle/security/crypto/core/PublicKey
        at oracle.as.config.utl.FileUtil.createSelfSignedOracleWallet(FileUtil.java:697)
        at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:631)
        at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:667)
        at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:558)
        at oracle.as.config.impl.OpmnProvisioner.generateWallet(OpmnProvisioner.java:70)
        at oracle.as.config.impl.OpmnProvisioner.createOpmnConfiguration(OpmnProvisioner.java:366)
        at oracle.as.config.impl.OracleASInstanceImpl.createOpmnConfiguration(OracleASInstanceImpl.java:586)
        at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:107)
        at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:137)
        at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createStandaloneASInstance(CreateASInstance.java:83)
        at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureInstanceStandalone(WebtierConfigurationAction.java:590)
        at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:441)
        at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:174)
        at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
        at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
        at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
        at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
        at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
        at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
        at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
        at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
        at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: oracle.security.crypto.core.PublicKey
        at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
        at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
        ... 22 more
The configuration of completed successfully.
Checking a screen shot of someone else's configure output theirs continues beyond
"Bootstrapping OPMN configuration files..."
and correctly generates the instance etc.
I have tried a reinstall, and also tried a generate a new instance using the silent config tool. Same errors each time.
Log also states;
Oracle Instance Home
                        Instance Home Size: 0 MB (or 40mb)
                        Available: 0 MB
. This varies between installs and configs but available is always 0. There is Gb's of space available in the directory and the user has write permissions.
Can anyone tell me why it is failing to correctly generate the wallet?

Solved. Oracle_home and Instance home must be subdirectories of MIDDLEWARE_HOME. MIDDLEWARE HOME and command to not install updates must be added to response file. Helpful to install and configure separately.

Apache does not start after installing the policy web agent

Hi,
We get the following error when we start the apache webserver on linux which has opensso policy agent installed/configured to it.
./apachectl start./apachectl: line 77: 4453 Segmentation fault $HTTPD -k $ARGV
Environment:
OS: Linux SystemName 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:27:17 EDT 2006 i686 i686 i386 GNU/Linux (32 bit)
WebServer: httpd-2.0.50-i686-pc-linux-gnu.tar.gz
Policy Web Agent: Apache_2.0.54_agent_2.2_RHAS3.0.tar.gz
Could not find the issue/solution for this problem on internet... Please suggest if anyone has some solution to this.
Regards
Manoj

Hi,
Once I had an iAS 1.0.2.2 running without problems. However after installing Patch 7 for Forms (released 27 august 2001) I get exactly the same error messages as Pieter. I have tried starting apache as administrator, comment out mod_ose, set wv_gateway_cfg, but none seem to work. Please help.
Environment:
iAS 1.0.2.2 on Windows NT
Oracle 817 on AIX
null

InDesign does not start after installing it first time due to missing plug ins ("Zusatzmodule")

Hello,
I was using up to now InDesign CS3, but I bought the upgrade to InDesign CS 6.
After installing the new version I tried to start it, but during the start it complains about missing plugins and stops.
So, I can not run CS 6.
The missing modules are: SVG Export.apln and Dynamicdosuments.rpln.
What can I do to make CS 6 running?
Thank you,
Gunnar

Hello Mylenium,
thank you for your answer.
I have to admit, that unfortunately I dont understand the reply. I was uninstalling, running the Adobe CS cleaner tool for CS 6, reinstalling (as suggested in other entryies of the forum). No improvement.
Question A: Do I have to run the cleaner tool for all CS including CS 3? I am a bit afraid of side effects and have nothing running afterwards. Since nobody confirmed in the forum that this will help I dont dare to play around.
Question B: Coming back to your proposal, what do you mean by proper admin privileges? I am the only user on this laptop and never did something to any admin configurations.
Finally, I installed CS 6 on another laptop. This works. However, this one I dont want or can't work with for other reasons.
Gunnar

Exchange replication service not starting after installing Rollup update 3 v3

Hi,
I have installed rollup update 3 v3 for exchange 2010 sp1 on my mailbox server. This mailbox server is a DAG member. After installing update rollup, Microsoft exchange replication service on this server attempts to start & show status started for couple
of seconds & then gets stopped. This behaviuor continues untill i uninstall this rollup. I have installed the same rollup on other DAG member as well with no problem. The following errors are generated in the application logs,
Event ID 4096: The Microsoft Exchange Replication service failed to start the Tcp Listener. Please review the Event Log for more information. The system will attempt to start the service again in 30 seconds.
Event ID 2121: The Microsoft Exchange Replication service failed to start the TCP listener. Error: System.Net.Sockets.SocketException: Only one usage of each socket address (protocol/network address/port) is normally permitted
at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Bind(EndPoint localEP)
at Microsoft.Exchange.Cluster.Replay.TcpListener.StartListening()
Event ID 4999:
Watson report about to be sent for process id: 6000, with parameters: E12, c-RTL-AMD64, 14.01.0289.001, msexchangerepl, M.E.Cluster.Replay, M.E.C.R.ReplicaInstance.TargetGetCopyStatus, System.MethodAccessException, a379, 14.01.0289.001.
ErrorReportingEnabled: True
Event ID 2060: The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB1\SRV-MBX2. The copy will be set to failed. Error:
The NetworkManager has not yet been initialized. Check the event logs to determine the cause.
Event ID 2060:
The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB2\SRV-MBX2. The copy will be set to failed. Error: The NetworkManager has not yet been initialized.
Check the event logs to determine the cause.
Thanks
in Advance!!

I hope you are following the best practice to install rollup on DAG.
Suspend activation for the databases on the server being updated.
Perform a server switchover so that all databases on the server are passive copies. There will be a brief interruption in service for the mailboxes hosted on the active databases during the switchover process.
Install the update rollup.
Resume activation for the databases on the updated server.
Perform database switchovers as needed.
http://blogs.technet.com/b/scottschnoll/archive/2009/12/10/installing-update-rollup-1-for-exchange-2010-on-dag-members.aspx
Thanks Uday Kiran,
Senior Consultant
Cyquent Technology Consultants, Dubai
Please Mark as answer if it helps you

DistributedCacheService not starting after installing CU5

Hello!
I installed AppFabric CU5 (http://support.microsoft.com/kb/2932678) on a VM running SharePoint 2013 (Windows 2012).
After installing (and updating the config file), the AppFabricCachingService no longer starts. The event viewer has the following:
Event ID: 1026
Application: DistributedCacheService.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.TypeInitializationException
Stack:
   at Microsoft.ApplicationServer.Caching.VelocityWindowsService.StartServiceCallback(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
Event ID: 1000
Faulting application name: DistributedCacheService.exe, version: 1.0.4632.0, time stamp: 0x4eafeccf
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16384, time stamp: 0x5010ab2d
Exception code: 0xe0434352
Fault offset: 0x00000000000189cc
Faulting process id: 0xa0
Faulting application start time: 0x01cff81d1301034e
Faulting application path: c:\Program Files\AppFabric 1.1 for Windows Server\DistributedCacheService.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 50d61782-6410-11e4-93fe-00155d73c008
Faulting package full name:
Faulting package-relative application ID:
I removed and added the host into the cluster, but it still did not start. I even updated the HOST file to have the fully qualified name.
Any assistance is greatly appreciated.
Thanks,
Greg

Hi,
According to your post, my understanding is that after installing the AppFabric CU5, the AppFabricCachingService could not start.
After installing the update you should do the following in all the servers that are holding the distributed cachec.
After applying the CU, AppFabric uses a nonblocking garbage collection (background server garbage collection).
Nonblocking garbage collection is a new feature in the .NET Framework 4.5.
To apply this fix, follow these steps.
1. Upgrade the servers to the .NET Framework 4.5.
2. Install the cumulative update package.
3. Enable the fix by using the following setting <appSettings><add key="backgroundGC" value="true"/></appSettings> in the DistributedCacheService.exe.config file between
       </configSections>
   <appSettings><add key="backgroundGC" value="true"/></appSettings>
   <dataCacheConfig>
4. Restart the AppFabric Caching service for the update to take effect.
Note :By default, the DistributedCacheService.exe.config file is located under the following directory:
%ProgramFiles%\AppFabric 1.1 for Windows Server
For more information:
http://blogs.msdn.com/b/calvarro/archive/2014/03/20/points-to-consider-with-distributed-cache-on-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Manages Exchange server health Service is NOT starting after installing EDGE role using Exchange2013 SP1+CU5 setup

I used Exchange 2013 SP1+CU5 to install Edge role on Windows server 2012 R2 workgroup machine
then after installation the service "Exchange server health Service" was not starting automatically or manually with the following error "Error 1075: The dependency service does not exist or has been marked for deletion"
and in the Event Viewer I have this error:
Event Id: 7003
The Microsoft Exchange Health Manager service depends on the following service: MSExchangeADTopology. This service might not be installed.
please advice

The Exchange 2013 Edge Role has a reduced set of services compare to a CAS or MBX server role:
Active Directory Web Services
Microsoft Exchange ADAM
Microsoft Exchange Anti-spam Update
Microsoft Exchange Diagnostics
Microsoft Exchange Credential Service
Microsoft Exchange Health Manager
Microsoft Exchange Service Host
Microsoft Exchange Transport
Microsoft Exchange Transport Log Search
The above one was from Exchange 2013 Sp1. Not sure whether Microsoft Exchange Health Manager service has been replaced from CU5.
Just restart the edge server once again and ensure that you are able to see this service again in services console.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

System not started after installing grid control

HI,
I have installed grid control 10.2.0.1 on 11g r2 on rhel5.After installing grid control, whenever system get booted, it got hanged and saying
after starting up the listener
sql>ora-01078: failure in processing system parameters
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>

Hi,
Thanks for the reply!!!
I have installed 11g grid infra on 2 nodes and then try to install 10g grid control on node 1 but when i am booting my system it got hanged and throw an error:
sql>ora-01078: failure in processing system parameter
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>
then i have to forcefully bring down the system and started the linux in a single user mode and thereover i have to move or rename the dir to some other location,then only system get started.after starting up the system i have to again move or rename the grid control dir to org location.
So my question is which file or dir is forcing system to startup the grid control on boot?

Adobe Acrobat XI will not start after install? Help

I have installed Acobat XI but the program does not start. Purchased and downloaded from Amazon.

I have the same problem. Gets as far as registration and never goes through. Then if cancel out of that, the Acr process lanches then just disappears then I get an error that says "Acrobat failed to connect to the DDE sever"

ITunes will not start after installing newest version

After installing the newest version of iTunes, I click on the iTunes icon and the license agreement flashes on the screen and disappears before I can click on the agreement. I am running Windows 2000 professional edition. Quick time will also not start. I have uninstalled and reinstalled several times, with and without firewall software running. Nothing seems to help.

hi Rachel!
No error messages, nothing. The hourglass is next to the mouse for about 3 seconds.
okay, if it's not NIS 2005 related, let's first check up on this:
http://docs.info.apple.com/article.html?artnum=302386
... but by the sound of it, you might need to check on this:
http://docs.info.apple.com/article.html?artnum=302538
if it turns out to be a weird start-up item to blame, would you mind letting us know what it's called? (there's a hint that there's a new kind of malware out there causing "the flash" and possibly some other start-up problems.)
keep us posted.
love, b

[BO XI 3.1] BO Designer not starting after installing SP5

Similar Messages

Maybe you are looking for