BO XI 3.1 SP2 Issue

Greetings to all,
we are encountering a strange issue after installing the BO XI 3.1 Service Pack 2 on our server: row-level restrictions created in the universe are no more applied to InfoView report, while throught Desktop Intelligence/Web Intelligence the restrictions are applied correctly.
This happens just after the SP2 installation.
We have tried to recreate the restriction, to export the report again, but nothing has changed.
We also have a trouble with dates: now reports in which we select an interval on dates seem to operate like a "greater than-equal to" statement (for example, if we select an interval from 24/08/2009 00:00:00 to 30/08/2009 00:00:00, the report select data from 25/08/2009 to 30/08/2009). In addition it seems to exchange months and days even if we did the correct changes in the prm file.
The trouble related to the interval appers only if we also select the hh:mm:ss.
Thanks for your help.
Edited by: Claudio Signorini on Sep 11, 2009 5:19 PM

Does anyone have any thoughts on this? Our security folks won't let us open IE up to load unsigned ActiveX controls.
Thanks!
-Dell

Similar Messages

Tecra A8, WinXP SP2 - issue with built-in speakers

Hello there,
I know this issue has been brought up a few times, but I can't find a solution.
I recently inherited a Toshiba Tecra A8. Problem is : the built-in speakers can't seem to work, but the sound is just fine on external speakers or headphones. The speakers used to work at some point in the past, but the previous owner can not tell me what caused the sudden change.
Here's what I did, chronologically, after browsing multiple forums :
- SP3 was installed when I got the computer. I tried to revert back to SP2.
- I've reinstalled XP (had to, machine was too slow). SP2 came with the install CD.
- I've installed two XP hotfixes that were supposed to solve the problem : KB835221 and KB888111
- I've re-installed the Realtek Audio HD codec
- I always try muting/unmuting after everything I do, even before or after a reboot.
Here's what I can tell so far :
- Sound icon is present on the system tray. All volumes are up, whether on the Windows sound manager or on the Realtek one.
- I do not have DOS beeps.
- I'm still on SP2. Didn't try moving on to SP3 (on this new XP install, of course).
- Before I did reinstall Realtex Audio HD, the "internal" option listed under "I/O audio" was shown, but I couldn't access it. After the reinstall, it simply disappeared.
I think that's pretty much it. I came across the same solutions on different forums or group discussions. I've been searching for two days now, to no avail. The computer has never been dropped or damaged, and since it seems that a lot of people experience(d) the same problem as mine, I'm pretty sure it's not a hardware problem. Well, I hope it's not.
So there. I urge you, nay, I beg you to work your magic and come up with a flawless, absolute solution that will give me back the joy of listening to Justin Bieber in peace. Or something else.
Thanks in advance !
Toshiba Tecra A8
Windows XP Pro 2002
SP2
Intel Core 2
T5500 1.66GHz

> the built-in speakers can't seem to work, but the sound is just fine on external speakers or headphones. The speakers used to work at some point in the past, but the previous owner can not tell me what caused the sudden change.
The speakers dont work but the sound is coming from headphones and external speakers?
Well, this would mean that your sound driver is OK and this is probably a speaker related problem. I think it speaker hardware malfunction :(

PI 73 sp2 - issue with multimapping

We are having a strange issue in PI 73 sp2. We recently upgraded from PI 711 to PI 73 and migrated all our development artifacts over to the new instance. We have a multimapping scenario (1:3) which was working fine in the PI 711 instance is not working anymore in the new PI 73 instance.
It is a
SOAP (AE) -> IE -> JDBC/ABAP Proxy
scenario.
We can see the payload in the RWB in Comm Channel monitoring but when it comes to the IE, mapping runtime is receiving an empty payload and the mapping fails.
Has anyone encountered any such issue ? I am hoping that someone can point me to a OSS note as it doesnt seem like anything is wrong with the interface as such. It was working just fine in the PI 711 instance and no changes were made in the new instance.
Thanks
Sridhar

Gabriel .. we are using the SOAP Adapter, we did update the meta-data to the PI BASIS 7.30 version. We are able to see the payload in the RWB in the SOAP Sender channel.
On further research, we noticed that the mappings migrated over from the PI 711 box to the PI 730 box are not working as designed as the contexts seem to be messed up. Hence, the sequence of execution is haywire and causing lot of errors. I am not sure if anyone else is facing similar issues.
Thanks
Sridhar

Netweaver 7 sp2 issue

Hi All,
Was trying to install the Dialog instance on the Netweaver but the script keep on prompting for the default.pfl user which I already have it on my /sapmnt/B02//profile folder.
SAPDBHOST = jjbwprod
j2ee/dbtype = db6
j2ee/dbname = B02
j2ee/dbhost = jjbwprod
SAPSYSTEMNAME = B02
SAPGLOBALHOST = jjbwprod
rdisp/bufrefmode = sendoff,exeauto
DIR_PUT = /usr/sap/$(SAPSYSTEMNAME)/put
SAP Messaging Service for ABAP
rdisp/mshost = jjbwprod
rdisp/msserv = sapmsB02
rdisp/msserv_internal = 3900
Error Message during installation.
Profile parameter rdisp/msserv_internal is not set for instance DVEBMGS00/B02 on host jjbwprod.
You have to set the parameter in the default profile and restart the instance.
For further information refer to SAP Note 821875.
Please help. Thank you.

location of the default.pfl should be /usr/sap/<sid>/sys/profiles not /sapmnt/<sid>//profile..
Regards
Juan

Java Plug-in not working with WinXP SP2 Registry Key Missing Error Pop-Up

I have WinXp PRO with SP2 and the Oct 12 Security Update Patch for SP2 loaded and I went to my Control Panel and saw that the JavaRuntime Environment 1.4.2_04 icon was missing and when I went to click the Java Plugin icon to Open it, I got the following message in a Error Pop-Up window:
The system cannot find the registry key specified:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java pPlug-in\1.4.2_04\JavaHome
I then went to Chage Access Program Controls and when I clicked on the Change box for the program, it wanted me to re-install the whole environment.
Prior to doing this, and potentially screwing up my MS winXp environment, I went to the Sun support page for Java Plug-in and I did get the dancing elmo appear as they said I would but I noticed that my environment was MS VM, not Java and that I was out of date and a newer update was avaliable.
The downloads page for the plug-in states clearly that it supports WinXp SP1 and NOT SP2.
SO, my question is, do I need to re-install anything or wait till the whole SP2 issue and java with (BITS) issue gets resolved and just use the MS VM engine during my browsing time? Is there a workaround and what impact will this have on my system? I am not developing Java Apps but am a Power user in Windows who is wondering if applets and general browsing might be easier, faster and more fluid if the Java Runtime was enabled as opposed to the MS VM solution?
Any ideas or thoughts on this very timely issue would be greatly appreciated as I see others have tried to post related issues but none that succinctly combines what I have asked for here in this post.
Thanks from NYC -Phil

did you know that XP SP2 has so many technical problems? try SP1 or contact the WindowsXP Vendor

Cannot install ZfD65 SP2

Scenario:
NW 6.5 SP5
ZfD 6.5 SP2
Issue:
I have a server running ZfD imaging and wks import/removal.
This server runs ZfD 6.5 SP2.
Now I also need to install Inventory services from my product CD.
But installing ZfD Inventory services from the product CD
degrades ZfD 6.5 back to v6.5.0.4, while it before Inventory install was
running v6.5.2.0 (SP2 installed).
I therefore need to reinstall SP2, but installation fails, stating that either I'm not
logged in with proper rights (although logged in as admin), or ZfD is not installed
on the server.
I have tried all possible combinations of the registry settings described in TID 10098135,
and I have also tried to install SP1a before SP2, but nothing helps.
Looking at the ZfDDebug.log, the last lines in the log are:
SelectProductsPage: Adding IMAGE_FS1.ADM.HAMAR_KOMMUNE to valid Servers
SelectProductsPage: Number of valid servers = 1
SelectProductsPage: server [0] = HAMAR_TREE IMAGE_FS1.ADM.HAMAR_KOMMUNE 6 IMAGE_FS1
SelectProductsPage: Attempting to authenticate to IMAGE_FS1
SelectProductsPage: Authenticated to IMAGE_FS1
getZenworksVersion: Attempting to get zenworks version from IMAGE_FS1
getTextFile: \\IMAGE_FS1\SYS\System\zenquery.out
But the file zenquery.out does not exist anywhere...
It seems as if the SP2 installer cannot determine whether ZfD is installed in the server at all,
or that the version cannot be read out.
I have revived the tftp imaging services via salvage, but i fear that there ar far more
files that hav been set back to v6.5.0.4 insted of the correct (and actually installed) v6.5.2.0.
What must I do in order to reinstall ZfD 6.5 SP2 again?
And why is there not any updated product CD iso-file including SP2 to download?
Every download are old iso images...
Please help!
-Erik

Erik,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Failed to capture service in APP-V 5.0 SP2

Failed to capture service in APP-V 5.0 SP2
Seq’r Version: APP-V 5.0 SP2
OS version: Windows 7 64 bit SP2
Issue: Application (Source) installing two services.
IBM MQSeries
IBM WebSphere
But while seq’g the application, seq’r able to capture only one service (IBM MQSeries) not second service (IBM WebSPhere)
Cont...

My Observations:
1. If we observe second service “IBM WebSphere” is log on as “.\MUSR_MQADMIN” with password as shown below.
Apparently APP-V 5.0 SP2 Seq’r will capture only services log on as “localsystem” on source installation.
cont...

Disconnects (Windows clients - lots are XP SP2)

All,
We have a Tarantella installation where a lot of windows clients (most of
them are XP SP2 based) experience sudden disconnects. (Tarantella 3.3).
Do other people have experience with this?
Are there any known client issues (could not find any on the web)?
Are there any known Windows XP SP2 issues with Tarantella 3.3?
Any advise on which logging to increase to troubleshoot this?
Kind regards,
Arnout

It happened to be in the SSL acceleraters.
However yes keep alive was correct :-)
Thanks!
Arnout
"Rob" <[email protected]> wrote in message
news:ct8egb$oeg$[email protected]..
Tarantella News wrote:
All,
We have a Tarantella installation where a lot of windows clients (most of
them are XP SP2 based) experience sudden disconnects. (Tarantella 3.3).
Do other people have experience with this?
Are there any known client issues (could not find any on the web)?
Are there any known Windows XP SP2 issues with Tarantella 3.3?
Any advise on which logging to increase to troubleshoot this?
Kind regards,
Arnout
This could be a good starting point:
http://www.tarantella.com/support/documentation/enterprise/e3.4/help/en-us/base/standard/keepalives_changing.html
Best,
Rob

SB Live! WinXp Pro SP2 probl

I installed my old SB Li've! card in my new system (Athlon64 3500+, MSI K8n Neo2 Platinum). Windows recognized the card and installed its own drivers, I reboot and everything is working properly. I install the Li'veDRV-pack driver pack, which seems to go OK, I reboot, I hear part of the log on sound and then the sound cuts out. Then there is no sounds comming through the card. The creative diagnostics list everthing as a pass, and the speaker test work, but I get no sounds from windows or any applications.
I have tried to uninstall and reinstall to no evail. I think this is an SP2 issue but there is no obvious error to go on.
Any ideas/solutions would be greatly appreciated.
Mike

Mdidonato,
Try this:
Go to Control Panel/Systems, then go to the advanced tab. On here there will be a button for performance Options, click on this. In here there should be a tab for Data Execution Prevention. Set this to "turn on DEP for all programs and services except those I select". You will now want to add the CThelper program to the list in here, it is typically located in c:\windows\system32. Then reboot the system and see if you get sound.
The DEP error is caused by a feature on your processor called "Enhanced Virus Protection (AMD)" or "Enahanced Disable Bit (Intel)" or NX (No eXecute) Bit in non-trademark speak. This is a new way to prevent buffer overflow exploits from effecting your system, however it can have some drawbacks. Let's see if disabling this helps us fix the problem.
Jeremy

Is Via 4-1 required for XP SP1a

I am about to install XP SP1a and dual boot with my current o/s win98se. I was wondering if I actually needed the 4-1 (as a necessity or to improve performance) or whether XP SP1a has all these driver requirements naitively.
Have you guys installed the 4-1 on your XP rigs?

Quote
Originally posted by risk_reversal
Rogue_Wulff, many thanks for clarifying this point. I guessed it had to be something along those lines.
May I impose and ask you for some more of your 'bullet type' clarity.
The 4-1 consists of several files and I have listed below what I believe should be
installed and what not:
1. I am sure that I MUST install the INF file
2. I am sure that I must NOT install the IDE miniport driver
3. I am reasonably sure I MUST install the IDE Filter driver (aka ATAPI Vendor Support Driver)
4. I am reasonably sure that I MUST install the AGP Vxd Driver. (I have read that with SP2 this module should definitely not be installed and the MS driver should be loaded instead).
Am I correct in my assessment please.
Many thanks again for your help
XP will only install the portions that are actually needed, so there is no need to be concerned about which parts to install.
I do believe you have listed everything correctly, as far as what XP actually uses.
As for the SP2 issue, I have heard about that, but I cannot confirm nor deny, as I have not attempted SP2 on my machine.

New XTier Apache2 Module - does it require SSL connections?

Scenario:
NW 6.5 SP5
eDir 8.7.3.8
ZfD 6.5 SP2
Issue:
TID #: 2973878
New Apache2 xtier module for NetWare 6.5 SP5 released for LDAP over SSL .
Details:
After applying the new MOD_XSRV.NLM (228187 byte/17. may 2006 6:35:47 pm),
the Middle Tier clients can no longer login to eDir!
Backrev. to the old version solves the problem.
We do not use SSL for the Middle Tier LDAP connections through the ZfD Agent,
but use cleartext connections over port 389.
This patch was applied due to general maintenance/patch level, although we actually don't
need the SSL option for the moment.
But does this new MOD_XSRV.NLM actually require use of SSL,
or is it supposed to handle both cleartext and SSL LDAP-connections?
In other words, can it be used at all if we don't use SSL for Middle Tier connections?
- Erik

Erik Aaseth,
>TID #: 2973878
>New Apache2 xtier module for NetWare 6.5 SP5 released for LDAP over SSL .
This update is only for ZFD7. So no worries.
The TID doesn't state this so it will be updated.
Jared Jennings
Data Technique, Inc.
Novell Support Forums Sysop
http://wiki.novell.com

Does the Inventory database clean itself?

Scenario:
NW 6.5 SP5
eDir 8.7.3.8
ZfD 6.5 SP2
Issue:
Need to delete and reimport all wks in eDir.
Details:
All workstations are imported into eDir, and scanned by ZfD 6.5 Inventory services.
A number of the wks are (due to historical reasons) imported into wrong contexts,
and a number of them are imported with a wrong wks name too.
What happens with the Inventory database if I delete all imported wks objects,
and then reimports them with a new name, and some of them also into another OU?
Can I just do this, and thereafter start a full new inventory scan?
What will happen with the old database entries for the wks that will be imported into a new OU,
and with the wks that will import under another name..?
In other words, will the inventory database be cleansing itself for the old wks entries?
- Erik

On Mon, 14 Aug 2006 09:15:32 GMT, Erik Aaseth wrote:
> In other words, will the inventory database be cleansing itself for the old wks entries?
normally yes.. take a look at the documentation and the sync schedule of
the inventory service object.
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

ZFD 4.00 update options

Hi,
I have ZFD 4.00 in my NW 5.1 environment. NOT 4.01, just original out of
the box 4.00. It does everything I need it to do; imaging, policies
(including group policies) remote control, app objects and NAL delivery.
It has been working great since day 1 and Ive imaged and deployed about
120 PCs with it, all XP with sp1.
Problem: Time to deploy more PCs. I know at least 2 things; 1, I will
not be able to image them with ZFD 4.00 because the NIC wont be
understood. 2, There may be some policy problems or weird goings-on
because these new PCs will have XP sp2 on them.(I still have to check the
Cool Solutions site; I recall that there was an entire thread on sp2
issues so Im not too worried about that)
OK, I know one more thing; Im EXTREAMLY APREHENSIVE about patching ZFD
and breaking what I already have!
Questions:
1.Where to start? All of the patches I see refer to the baseline as ZFD
4.01 (such as zfd 401 ir6.) Can I even do anything with 4.00? Going to 7
isnt an option at this time; too many technical and monetary hurdles.
2.Can I update just the imaging pieces so I can somehow do imaging with
what I have? (To make matters worse, I have no Linux experience or Linux
box to gen imaging files with.)
All suggestions GREATLY appreciated!
Gregg

Gregge,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

When will 3.6 for Windows be released

The website said 3.6 for Windows would be avialable in the Spring of 2005. Spring has come and gone, and 3.6 wasn't released.
Does anyone know when it will be released?

Hi Preston,
Sorry for the lack of updates on the MQ 3.6 on Win schedule. We are very close to releasing it, and we expect to make it available end of July 2005.
Thanks for your patience.
Will try to get your MQ 3.5 sp2 issues addressed that were posted on a different thread.
Regards
Shivani

SP3 Software download clarification

Hi
I have installed SAP HANA SP2 and due to some problem my engine cannot be started.
Instead of solving this SP2 issue thinking of going to SP3 directly.
So Planning to download Enterprise platform and install sp3.
In this case, I am thinking of going fresh SP3 installation.
What are the things to be considered in this case?
1)Simply delete all HANA folders in Linux system.(deletion not required?)
2)Restart Linux system
3)Since i dont want to use Unified installer, I am thinking of downloading and installing manually as simple as below.
・Install SAPHOSTAGENT(linux) SAP HOST AGENT 7.20(path 95 recent)
・HDB Studio Repository(skip)
・SAP HANA DB(linux)　Patch 24(recent)
・SAP HANA Database Client(Windows)　Patch 24
・HANA Database Studio(Windows)　patch 24
Above all i have below questions.
1)Not necessary to delete the folders?(step 1)?
(what difference in updating SP3 and installing fresh SP3)
2)Does the above softwares are enough to install SP3? any OS level patch should be done?
3)Also i would like to know whether below things are compulsory?(displayed in SWDC)
->Any SAP kernel needs to be updated? SAP KERNEL 7.20 EXT 64-BIT ??
->SAP HANA Installation & Update
(did not downloaded Hana unified installer/LM structure/SUM for HANA)
Regards
Magalingam

Hello Magalingam,
to add to Lars, you find in the Installation Guide the following paragraph:
"The components of SAP HANA can only be installed by certified hardware partners on validated hardware
running a specific operating system. Any other system or content developed with such systems is not
supported by SAP. For more information, see the information page of the product version. Support
Package Stacks (SPS) can be downloaded and applied to appliances according to agreements with
the respective hardware partner."
Please talk to you hardware partner to get a clear install.
Regards,
Marc
SAP Customer Solution Adoption (CSA)

BO XI 3.1 SP2 Issue

Similar Messages

Maybe you are looking for