BO XI 3.1 SP7

Hello,
in the SAP Support Portal, I found only sp7 for Crystal Reports and Live Office.
Where is the SP7 for Crystal Server?

Hi Emanuele,
Login to the Service Market Place using your S-user ID. Then browse to:
Support Portal -> Software Downloads -> Analytics Solutions -> Support Packages and Patches -> C -> Crystal Reports Server 2008 V1
You're only allowed to see the products you've purchased in the downloads section. If you can't see the product in here then it either means that the product hasn't been purchased or the profile hasn't been updated in which case you can get in touch with your account manager or log a ticket with SAP.
-Abhilash

Similar Messages

BOBJ XI 3.1 SP7 SSO logout and login again not working

Hello,
The customer have a deployment of five BOBJ XI 3.1 SP7 with Tomcat 7 servers and AD integration with SSO.
The case is that:
The SSO login works fine on all servers, but when click logout and then go to the address bar and hit enter on the first four servers SSO reacts again, but on the 5th does not. The only way to login again is to close the browser and open it again.
The configuration and the versions of Tomcats is exactly the same. The only difference is in the version of Windows the first four servers are on Windows 2003R2, but the 5th(the last) is on Windows Server 2008R2. I think the problem is somewhere in the application server(the Tomcat), but the server.xml and the web.xml of the InfoViewApp are the same.
The SPNs are:
BOBJCentralMS/hostname serviceaccount
HTTP/hostame serviceaccount
HTTP/FQDN serviceaccount
I'm out of ideas so if somebody can help I'll be happy.
Thank you in advance!
Dilyan

Hi Manna Das,
I'll check the log, when i go to the customer(have no remote connection).
Hi Sebastian Wiefett,
Where in the BOBJ documents is described that the all nodes in the cluster must be on the same OS? I think it does not matters. Only the version of SP and FP must be the same.
Different browsers are not allowed in the customer's newtwork. Only Internet Explorer.
I'll try Kerberos debugger. I forgot about it.
Hi raunak kumar,
The case is not the same. First the resolution described in SAP Note 1835729 is included in SP7, second here the problem is not on the refresh page(F5), but on click in the address bar and hit "enter". There is difference between the two methods.
Thank you for the suggestions!

Error while creating user id from MDM JAVA API in 7.1 SP7

Hi,
We are trying to create user id in MDM 7.1 SP7 using JAVA API in SAP Portal. When trying to create user id, we are getting below error. If you have any solution please let us know.
com.sap.mdm.commands.CommandException: MDM repository data is out-of-date or is locked by another MDM Server. Refresh the data and try the operation again. If the error persists, contact the system administrator
Thanks,
Vinit Pugaliya

URGENT** How to change OIM user password from outside OIM

Error while upgrading NW04s ABAP from sp7 to sp8

Hi,
I installed NW04s in my system and its ABAP stack is upgraded to sp7. When i was upgrading its SAP_BASIS support package to sp8, i got the following error.
Error in phase: IMPORT_PROPER
Reason for error: TP_BUFFER_INCONSISTENCY
Return code: 0008
Error message: Pkgs. in queue don"t exist in the tp buffer (e.g. SAPKB70008)
This phase imports all Repository objects and table entries. It may terminate for the following reasons:
○       TP_INTERFACE_FAILURE: The tp interface could not be called.
○       TP_FAILURE: The tp program could not be executed. For more information, read the SLOG or ALOG log files.
○       TP_STEP_FAILURE: A tp step could not be performed successfully. You can find the source of error in the relevant log, for example, in the import log.
If a tp step 6, N or S is in the termination message, it is a step independent of the transport request. The corresponding logs are contained in the log overview under the node Import steps not specific to the transport request.
You can also find these logs in the following files in the log subdirectory of your transport directory (usually /usr/sap/trans/log):
tp step 6: P<YY><MM><DD>.<SID>
tp step N: N<YY><MM><DD>.<SID>
tp step S: DS<YY><MM><DD>.<SID>
To display these files, run report RSPUTPRT or call transaction AL11.
Can anyone help me to resolve this problem?
Thanks in advance.

I have the similar problem to yours with tp_buffer_consistency at the xpra_phase when I was runing SAINT on a SAP R/3 Service Tool (RTCTOOL) with SAPKITAR19.
Shall you confirm what you have solved your problem are:
1) You have removed registers from the file /usr/sap/trans/buffer/SID which contains the troubled register, an example SAPKNNNNNN. First make a backup of that file before removing registers.
2) You have removed registers from the two tables: PAT01 (PATCH=SAPKNNNNNN), and PAT03 (PATCH=SAPKNNNNNN)
3) Invoke the trx SAINT
4) Installation package-->load package --> from application server
5) Select the uploaded SP and click the button Continue.
6) Anything else.
Appreciate in hearing from your input.
Rodolfo

Error is coming at the time of Installation of SAP Netweaver 04's sp7

Hi All,
An Error is coming at the time of Installation of SAP Netweaver 04's sp7
Error: Unable to create an account for <SystemName> for <SAP Service sid>
can anyone suggest me regarding this.
Regards
Phanikumar

Hi
Thanks for ur suggestion,
I got the solution to this error.
The main reason is at the time of Intsalling Netweaver on windows 2003 server with Administrator rights, as per the Installtion manual we have to follow the windows password policy must and should and give the same for the Master Password while installing, then we won't get error.
Thanks & Regards
phanikumar

Error: Invalid dimension member with special character / in BPC NW 7.5 SP7

Hi experts,
We are encountering the following problem in our Financial Planning application.
We are migrating our existing BPC solution from one server to another through backup and restore. The existing solution was on BPC NW 7.5 SP 5. The profit_centre dimension in the existing solutions has several member ids with special character '/' (forward slash). The dimension never threw an error when processed in the existing solution and there is planning transactional data against these member ids.
While the entire configration , appset , files were successfully restored through UJBR on the new system (BPC 7.5 SP7) through UJBR (backup and restore), the masterdata could not be restored only for this Profit_centre (masterdata for other dimensions were processed successfullu). All the member ids with / are rejected for this dimension. The same error is thrown if processed through the admin client from the member sheet.
Error: Dimension member PC_FF/WS/NT is an invalid member ID
Error in Admin module
Is there any setting which need to be made to allow / character in member ids? Any suggestion to get around this problem would be much appreciated.
Thanks
Abhiman

Hi Abhiman,
Yes, you need to maintain the transformation file to correct all dimension member IDs. Can you please refer to the following link with a similar issue:
conversion file formula not working
Hope this helps.
Rgds,
Poonam

Pictures not appearing in after upgrade to SRM-MDM Catalog 3.0 SP7 Patch4

Hello,
Due to some issues in Advanced search we performed the service pack upgrade from SRM-MDM Catalog 3.0 SP5 (with MDM 7.1.03.72) to SRM-MDM Catalog 3.0 SP7 Patch4 ( MDM 7.1.04.146). With this new SP, the Pictures are not appearing anymore under the Hyperlink section anwhere in Catalog browser( Compare, Context view, Item details). With earlier SP pictures were appearing perfectly.
We have done like this:( refer earlier thread - Re: SRM MDM Catalog 3.0 Image display) thanks Sudhanshu, Jitesh and Mandeep for suggesting that solution!
Using the hyperlink field
type : rendered
MIME type : image type i.e. .jpg
URL : web URL
We had gone for this option because we dont want to store impages in MDM, and this worked perfoectly until new SP upgrade.
Any clues?
Thanks
Pravin

Hi Bala,
Nothing appears under the Hyperlink section in Catalog browser, though a valid link exists in Data Manager under Hyperlink as type-Rendered, MIME type as JPG and a valid URL.
I have searched Service Market place for this fix of this issue and found that SAP has improved the technology ( from Object Cache to Blob Cache) to display pictures/hyperlinks from SRM-MDM Catalog 3.0 SP06 and MDM 7.1SP04 onwards. We were on SRM-MDM Catalog 3.0 SP05 and MDM 7.1 SP03 before Dev upgrade.
Here are the notes for reference of others who get into same issue.
Note 1450593 - Implementation of BlobCache
This note states "MDM7.1 SP04 offers new image caching functionality called Blob Cache. The old functionality of Object Cache is replaced with the Blocb Cache mechanism in Catalog 3.0 SP06 P1"
Note 1505796 - Images not showing in SRM-MDM catalog (error in BlobCache)
This note talks about the issue in MDM API with Blob Cache. The Fix has been provided in SRM-MDM Catalog SP08 Patch 01.
But upgrade is not something that happens on the drop of a hat, we dont want to do another upgrade, I would like to know if there is a workaround.
Thanks
Pravin

PI 7.1 components fail self test after SP7 application

Hello: We installed P I (7.1) SP 6 successfully on sandbox and recently applied SP7.
While performing readiness check, any test step related to "cache connectivity test" is failing.
I am using the following Document: "Readiness Check - A compilation of simple and advanced checks for Process Integration 7.1 (PI 7.1) ver 1" document.
Also in the RWB, Business process engine and Adapter engine status shows RED.
Attempted to work thru notes 764176, 1117249 but still facing issue with Cache connectivity test.
Any one having problems with SP7. Help on resolving this issue is appreciated.
thanks, Srini

We applied the following patches and able to clear the issue.
ESPFRAMEWORK07_1-20001918.SCA
SP07 for ESI - ES PROTOCOL 7.10
ESI - ES PROTOCOL 7.10
#OS independent
Application Server Java
ESIUI07_2-20001923.SCA
SP07 for ESI USER INTERFACE 7.10
ESI USER INTERFACE 7.10
#OS independent
Application Server Java
SAPXIESR07_7-10005116.SCA
SP07 for ESR 7.10
ESR 7.10
#OS independent
Process Integration
MESSAGING07_8-20001897.SCA
SP07 for MESSAGING SYSTEM SERVICE 7.10
MESSAGING SYSTEM SERVICE 7.10
#OS independent
Application Server Java
SAPXIAF07_6-20001975.SCA
SP07 for XI ADAPTER FRAMEWORK 7.10
XI ADAPTER FRAMEWORK 7.10

BPCNW 7.5 SP7 - Unable to connect to backend after installation

Hi Experts,
I have installed the BPC NW 7.5 SP7 with CMS authentication but when i launch the BPC server manager, it ask for user id and password. But when i enter the password for the bpc_sysadm, it gives the error "unable to connect to backend Abap system"
I am stuck and urgent help is required.
In backened, entry in the table UJA_SVR_DEFAULT is the hostname of of CMS.
I dont have sapmsg.ini file under c:
Windows as shown in the below log. Does it matter?
Below is the error log
2.0 #2011 08 14 20:06:39:223#+2:00#Error#ServerMgrService##EPM-BPC-NW##dbaf8fa3-8af1-478e-8091-082680638a84###TestConnection#BPC_SYSADM########Plain##<Exception><ExceptionInfo><exType>SAP.Connector.RfcException</exType><exMessage>Open file 'C:
Windows
sapmsg.ini' failed</exMessage><exSource>SAP.Connector</exSource><assembly>SAP.Connector.Connection, SAP.Connector, Version=2.0.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23</assembly><stackTrace>   at SAP.Connector.Connection.Open()
   at SAP.Connector.Connection.BeforeCall(SAPClient sapclient)
   at SAP.Connector.SAPClient.BeforeCall()
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SAPServerMgrProxy.SAPServerMgrProxy.Uja3_Get_User_Langu(UJ0_S_USER Is_User, String& E_Langu, UJ0_T_MESSAGE& Et_Error)
   at OSoft.Services.Common.ApplicationServiceProxy.ContextUser.GetUserLanguageProxy.getABAPUserLanguage()
   at OSoft.Services.Common.ApplicationServiceProxy.ContextUser.init(Hashtable htContext)
   at OSoft.Services.Common.ApplicationServiceProxy.ContextUser..ctor(String contextXML)
   at Osoft.Services.Webservice.ServerMgrService.ServerMgrService.TestConnection(String strParameter, String strContext)
</stackTrace><exTime>8/14/2011 8:06:39 PM</exTime></ExceptionInfo><WebServiceLayer><machineName>SVRMSA030</machineName><userName></userName><csnComponent>EPM-BPC-NW-SRV</csnComponent><className>ServerMgrService</className><MethodInfo><methodName>TestConnection</methodName><Params><strParameter></strParameter><strContext>
<Context>
<AppSet>
</AppSet>
<UserID><![CDATA[BPC_SYSADM]]></UserID>
<App><![CDATA[]]></App>
<Language><![CDATA[]]></Language>
<Session>
<SessionID><![CDATA[]]></SessionID>
<Machine><![CDATA[]]></Machine>
<Machine_Name><![CDATA[SVRMSA030]]></Machine_Name>
<ModuleName><![CDATA[]]></ModuleName>
</Session>
<CurrentView>
<Dim>
<Name></Name>
<Value></Value>
</Dim>
</CurrentView>
</Context></strContext><strSecurity>
<SECURITY>
<CheckSum><![CDATA[4jyETibRHl1Mk3AfQ/l9m8tNWjE=]]></CheckSum>
<IsZipped><![CDATA[False]]></IsZipped>
<IsEncrypted><![CDATA[True]]></IsEncrypted>
</SECURITY></strSecurity></Params></MethodInfo></WebServiceLayer><additionalInfo></additionalInfo><displayMode>ERROR</displayMode></Exception>#
Regards
Sagar
Edited by: sagar chouhan on Aug 14, 2011 11:30 PM

Thanks for your reply. I tried using "BPC_SYSADM" and "BPC_ADMUSR" but for both the users I am getting the same error. i checked the servername in the connection wizard it is correct. I am doing this for first time after installation.
In the backend, i checked the table UJA_SVR_DEFAULT and the entry for all the 3 fields are as below
ADMIN    -- CMS hostname
SYSADMIN - CMS Hostname
USER -- CMS hostname
Regards,
Sagar

SAP NetWeaver ABAP Trial 7.02 Win 64-bit Version (SP7)

i am using windows 7 can i able to install this
SAP NetWeaver ABAP Trial 7.02 Win 64-bit Version (SP7)
in my system ?
Moderator message : Moved from "ABAP General" to Trials, Previews & Other downloads.
Edited by: Vinod Kumar on Sep 14, 2011 3:34 PM

i am using windows 7 can i able to install this
SAP NetWeaver ABAP Trial 7.02 Win 64-bit Version (SP7)
in my system ?
Moderator message : Moved from "ABAP General" to Trials, Previews & Other downloads.
Edited by: Vinod Kumar on Sep 14, 2011 3:34 PM

SAP NetWeaver 7.02 SP7 64 bit AS ABAP Trial Version: License mismatch

Hello together,
after installing the wrong license in the AS ABAP 7.02 SP7 64bit Trial system (Win 7 64bit), I am no longer able to activate a temp license or to install the correct license:
F:\usr\sap\NSP\SYS\exe\uc\NTAMD64>saplikey pf=F:\usr\sap\NSP\SYS\profile\NSP_DVEBMGS00_SERVER01 -get
Creating temporary shared memory file failed, rc = 5.,SHM_NAME=F:\sapdb\data\wr
k\sqldbcttrace.shm,DIRECTORY_NAME=F:\sapdb\data\wrk\
SAP License Key Administration - Copyright (C) 2003 - 2007 SAP AG
System ID. . . . : NSP
Hardware Key . . : N0806500786        (of this computer)
Installation No. : SAP-INTERN         (digitally signed license key)
                   INITIAL            (old license key)
System No. . . . : 000000000311558752 (digitally signed license key)
Error *** (old license key)
Release. . . . . : 720
Software products: NetWeaver_ADA
How do I solve this mismatch?
Thanks, Bernd

The soluion is:
In this case, you can only delete the license key directly in the database: first of all, examine the contents of the SAPLIKEY table. This table should contain exactly one record with a LIKEY field that begins with "0002LK", and possibly another record with a LIKEY field that begins with "0002LC". If you find one or both of these records, but no further records, you can delete them using database tools.
Regards,
Bernd

SAP NetWeaver 7.02 SP7 64 bit Developer Key devleoper

Neither developers keys work for SAP NetWeaver 7.02 SP7 64 bit Application Server ABAP Trial Version . BCUSER with inital password of abcd1234 is not working with key 29671482393151224771 . The key works however with the 32bit version. The license is already installed for 90 days so I don't see the need to request a license, but the instructions seem to indicate that the key will not work without the license request. I have used the 32 bit version with BCUSER\abcd1234 and did not have to supply a developer's key.

Hi,
I had the same problem. Now, my issue is that I cannot request a new license. This is (presumably) because my system insists on calling itself SAP-INTERNAL instead of DEMOSYSTEM, whereas the license keys I have received from SAP are all for system DEMOSYSTEM. Any idea how to resolve this issue?
Regards,
Trond

Document templates with reference not working anymore with CRM2007 on SP7

Since we upgraded our CRM system(v 2007) to SP7 we are facing a serious problem with our document templates. The document templates do not contain any reference anymore (e.g. BP name and address details). This issue is a showstopper for the SP upgrade to go live in production.
We have taken the following actions to get it work again but all without any success:
- We have regenerated the webservice again (CRMOST_GENERATION);
- Created the webservice again and generate it (CRMOST_GENERATION);
- Run CRMOST_GENSTATUS_MONITOR for correponding webservice: status OK
-> when debugging /CRMOST/Z_D007_READ I see in table LT_MESSAGES: "Invalid mainobject: GDCOIRoot
Also, we investigated SAP note: 1329961 and notes related to CRM-BF-COM in SAPKU70007.
It looks like a bug in the new programming. When using standard SAP mainobject GDCOI no reference is taking into account anymore.
To visualize the issue for you, I will describe for you the steps how we can reproduce the issue:
- Within Account ID we identify an account and confirm account;
- Now when we create a service ticket we can enter some additional information in fields;
- We save the ticket and select the "Create a new letter" icon and select a document template;
- Now Word with XML is openened but WITHOUT taking any reference from confirmed account and service ticket.
I can not imagine we are the only customer with CRM2007 on SP7 and is using document templates who is facing this issue.
I really would appreciate it if anyone could help us in any way.
Regards,
Harrië

I had the same problem and solved it by doing this 2 stepa:
1. Run report CRMOST_CREATE_PACKAGE, because after upgrade, package $WS_BOL_GEN is missing.
2. Run report CRMOST_GENERATION to generate webservice again.
Regards.

Error while using Import Manager in MDM 7.1 SP7

Hi,
We are using MDM 7.1 SP7. I am trying to import a Tab delimited flat file through import manager. When I try to connect the source file, I get the following error * Logon Error: Found non-complaint CSV format in input stream [Encoding:UTF16].96*
If I try to import through an excel there is not problem. Can someone help to solve this error while importing in Tab delimited flat file through import manager.
Best Regards
Manoj

Hello Mandip,
I had tried doing it before posting my question. I saved it in UTF8 and then tried importing. Saving in UTF8 format made the import manager accept characters like Ä and the original error was solved, but when then a new error came which called for UTF16 format. When I digged into it I found that it is due to the double quotes(" ") in the flat file. When I removed the quote import manager accepted it.
So the conclusion is there should be a way to save the flat file in UTF16 format or the workaround is importing it in excel but again excel has limitation of importing 100000 records in one file.
Can you suggest how to save the flat file in UTF16.
Best Regards
Manoj

Java Proxies in PI 7.1 SP7

Hi,
we are trying to work with java proxies, (we are using PI 7.1 SP7)
while generating the proxies using Tools->Java Proxy Generation, below message gets displayed:
There are two versions of Java proxy generation that differ in the programming model:
1. The Java proxy generation in the ES Builder that will not be supported in later releases. It is only to be used for small adjustments of service interfaces in the ES Repository that were created because of the automatic migration of message interfaces of an Integration Repository (XI 3.0 or SAP NetWeaver 7.0) in the ES Repository. The Java proxes created with this proxy generation support the same programming model as in XI 3.0 and SAP NetWeaver 7.0.
2. The Java proxy generation in SAP NetWeaver Developer Studio that you use for new developments or for larger adaptation sof already existing service itnerfaces. The Java proxies created using this proxy generation introduce a new programming model.
what is the meaning of this message?
is it not recommended to create java proxies in PI 7.1 using ESR->Tools->"Java proxy generation". is there any different procedure for pi 7.1 java proxies.
thanks,
Madhu.

> what is the meaning of this message?
> is it not recommended to create java proxies in PI 7.1 using ESR->Tools->"Java proxy generation". is there any different procedure for pi 7.1 java proxies.
Yes. That is correct. You should use the Java Proxy Generation inside ESR only for updates of migrated PI 7.0 Java Proxies.
For new development use the Java Proxy generation of the NWDS. This will create EJB 3.0 proxies which are incompatible to PI 7.0 Java proxies. Java proxies created inside NWDS can run on any SAP Java system 7.1, an adapter engine is not required.
Regards
Stefan

BO XI 3.1 SP7

Similar Messages

Maybe you are looking for