BO XI issues with properties from BPC

Hi all,
I post again my message (it was not in the good forum) and I complete with answers to Andrey.
We created an universe on a BPC cube, after creation, we see all the properties of the dimension, but this is impossible to see the values of the properties, only their names.
Andrey asked "What do you mean by "to see the values of the properties""
What I mean is that if we make a request with WEBI on the universe, then we cannot see the values of the properties, ie I cannot see the value of the property "EVDESCRIPTION" in my request for example.
My colleague is trying to make a request that displays some accounts in line with the description of the account for example, and we can only see the ID of the account, but the EVDESCRIPTION property is empty each time, and this is the same with all properties of all dimensions.
Did someone already encounter this issue ?
Thanks

Post from thread: Re: BO reporting on top of BPC NW
Problem during Query development:
1. If we put unverse's dimension (in terms of BO) to Query and then execute query we can see the data from the dimension.
2. BUT
when we add an object "Measure" (for example YTD) to "Dimension" and run query - we have no data returned back. (even just Dimension data).
I found this issue documented in SAP note 1495455
It says:
Symptom
Business Objects Enterprise report has been created using the ODBO provider delivered with BPC 7.5 NW.
Report works well with only dimensions retrieved.
Same report using measures, gives error:
" The 'No data to retrieve. Query 1' "
Environment
BPC 7.5 NW.
Cause
This is because of the default behavior of ODBO provider.
If no restriction on any dimension, the ODBO provider takes the default member of a dimension to build the query.
The default member is the first member along a hierarchy.
The original ODBO comment is:
"We loop through our contexts and for each context, we create a
fully-qualified tuple consisting of the member as specified in the
context followed by the default member(s) of the
hierarchy(s) on the slicer axis as derived above."
Resolution
So the cube does not have transaction data and the WebI reports the no data message.
This is not a bug.
I took this to mean that you need to set a filter on each dimension (class in the Universe). Once I did this, I was able to get data.

Similar Messages

Issues with importing from excel

I have been running into a several issues with importing from Excel.
First my configuration
I am running SQL Developer ver 1.5.5 Build MAIN-5969
I am on a Windows XP Professional Version 2002 with Service Pack 3
I am importing into an Oracle 10g database.
1. SQL Developer doesn't work on Excel 2007, I have to save all my files into Excel 97-2003 format before I can use them.
2. If I run into an error loading and stop the process, SQL Developer doesn't release the Excel file and I get a sharing violation if I try to save the spreadsheet without closing SQL Developer.
3. I have found that I have to set print area to the area I want to work with, otherwise the import wizard tries to keep adding rows.
4. When using the Import wizard, it keeps adding commas on fields with numerics unless I specify the column in excel as text. Currently the column is formatted as General in the spreadsheet or I can change the wizard format to say the column is an integer, but it actually is just a code field with numeric characters so it may have leading zeroes that I need to keep.
This might be related,
I have a column in excel defined as text but only contains numerics. It is of length 4, but the wizard sets a precision of 5 with a datatype of VARCHAR2. If I try to change it to 4, I get an error saying the field is not large enough. Yet, when I do a LEN on the column, it only gives me a 4. I have other fields in the same sheet that a 3 position numeric and 2 position numeric and those are fine. I am thinking this is related to the comma being inserted in a numeric field for anything greater than 3 positions.
5. Importing excel dates to oracle dates doesn't work. I have to convert the excel date column to text then import as a VARCHAR, then convert to Date once in the database.
6. The default of nullible is not set on any columns and I have to set them before the import. (I would prefer it set to nullible and I have to uncheck the box to make it not nullible. I would prefer to import all of the data and then deal with the nulls after they have been pulled in)
7. When I select header columns included it uses that as the column names. Is it possible to do the name length check then? It has bit me a few times where I try to import and forget to check the name length and then I get an error when I start running the import.
8. If one of the columns to import has all nulls, then the precision comes out to 0 and if it isn't changed an error occurs on import. Could this situation default to a precision of 1?
9. It would be nice if there was a completion message displayed and a cancel option while running.

On point 3.
I have a column in excel that consists of numbers. 4 digit numeric codes. Ex, 1111, 2345, etc
The column's format is general. It displays as just 4 numbers.
When I start the wizard initially, the column appears with data as 1,111, 2,345, etc, on the Data Preview screen.
It determines the precision to be 5 on the column definition screen.
If I change the precision to 4 then continue, that field will error out when I verify with "not big enough to hold the data in source columns"
If, I change the excel column to a TEXT column.
Excel still displays as 1111, 2345, etc
The wizard then displays the same data 1111, 2345 on the Data Previeiw screen
Yet, when I get to the column definition screen it still sizes it as a 5
If I change it to a 4, I get the same error when verifying.
If I leave them alone as 5, then it processes just fine.

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

EVDRE Access Issue Post Upgrade from BPC 5.1 SP3 to BPC 7.0 SP6

Greetings,
Recently upgraded from BPC 5.1SP3 to BPC 7.0 SP6. Experiencing some strange behavior regarding the ability to send data to BPC from an EVDRE. Both users are part of the same secuity team, thus have the same security in both versions. However, one is able to send data to BPC 7.0 SP6 for a specific input template while the other recieves a message "There is no data to refresh."    This message is not encountered in BPC 5.1 SP3.
The strange thing is that the user who receives the "there is no data to refresh" is able to rebuild the input template ad hoc and send data to BPC
I have reviewed security, cleared the cache on the user's machine. I had the user with this issue log onto the app server; she encountered the same behavior regarding this template. Also tested a seperate input template in another application, this issue did not occurr.
Any ideas would be greatly appreciated.
Regards,
Greg Lakin

Hi, n
   From your description it looks like the problem si more related to that specific user. Please try to reprocess the security for that user. Then go on file server and go into <appset>/<application>/<private publication>/<user name> and delete appinfo.zip.
   Other idea can be related to the excel cache, but I don;t know why is not working for this specific user. You can try to save it in a new template as Patrick indicated.
You can try also clear local application information from admin client or try from other machine using the same client.
Hope this can hekp you,
Mihaela

Oracle 10g - issue with "DELETE from TABLE WHERE ID in (1,2,3)" (cfqueryparam used)

Hello, everyone.
I am having issues with running a DELETE statement on an Oracle 10g database.
DELETE
FROM tableA
WHERE ID in (1,2,3)
If there is only one ID for the IN clause, it works. But if more than one ID is supplied, I get an "SQL command not properly ended" error message. Here is the query as CF:
DELETE
FROM TRAINING
WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#">
AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
Anyone work with Oracle that can help me with this? I'm an experienced MS-SQL developer; Oracle is new to me.
Thanks,
^_^

Nevermind.. a co-worker just told me that I still have to use parenthesis around the values for the IN clause.

Issues with load from Excel

Dear all,
I have issues with loading the data from excel.
My excel file looks like this:
Time
Store
Neto_prodaja_ACT
Neto_prodaja_TAR
Jan-12
C1
16
16
Feb-12
C1
2
2
Jan-12
C2
1
1
Feb-12
C2
3
3
My procedure for load is:
CLEAR STATUS
Across Var Down Time, Store
Sel Neto_prodaja_ACT, Neto_prodaja_TAR
Sel Store Input
access lslink
     connect test1
     select * from my_list
     peek only 10
     read
end
When I load the data I receive following error:
      Time                         Store Neto_prodaja_ACT Neto_prodaja_TAR
    1 01/01/2012                   C1 16.00             16.00
    2 02/01/2012                   C1 2.00              2.00
    3 01/01/2012                   C2                                                                                                                                                                                                                                                                       1.00              1.00
    4 02/01/2012                   C2 3.00              3.00
4 Record(s) Read, 0 Record(s) Skipped.
DAT096:
Unexpected Dimensions in ACROSS/DOWN List For Variable NETO_PRODAJA_ACT
DAT096:
Unexpected Dimensions in ACROSS/DOWN List For Variable NETO_PRODAJA_TAR
The loaded data looks like this:
The data for store C2 is loaded also on store C1 so everything is messed up.
I also have a question regarding dimensions. I have a model in PAS which has data from different data sources (BW and excel). In excel I have dimensions which are not loaded from BW (they don't exist there). How to create such dimenison?
Thank you a lot in advance.
Best regards,
Petra

Petra,
The Forum isn't really designed as a training system but rather where people can share questions or get a separate pair of eyes to look afresh at issues that aren't working for some reason. This is particularly the case for something which is as important as creating dimensions.
The idea of the SSM Cube Builder/Model Designer was to enable people to build models with their relevant dimensions and metrics for demos and simple initial systems using manual data entry. If you are getting into building dimensions that will be outside BW then you are moving into the implementation arena rather than demo creation and need to work carefully so that things tie up.
I doubt people would expect to be able to set up/implement BW without training and SSM is the same.
If you would like training or would like to collaborate on a first project to enable skills transfer then my colleague Pedro and I would be happy to discuss this. We have done this with other people and it has worked well.
Regards
Colin

Quality issues with calls from US to Korea

I've always been a big fan of Skype. I have a premium account and I use "Skype to go" to call from the US to South Korea. Starting about 5 months ago, the quality of these calls has severely degraded. It is almost not worth the call. It is very difficult for me to hear the people I've called and for them to hear me as well. There is no Skype customer support contact phone number listed anywhere on the Skype website that I can find. Otherwise, I'd be addressing this issue with a real person. Is there a reason for this call quality degradation? Is there a fix in work? Is there a customer service number I can call? Is it time for me to leave Skype?

rates are available on http://www.skype.com/en/rates/ just enter Itay in the destination and check the rates lower down the page.
If you are going to make a lot of calls - check the subscriptions available too...
There are subscriptions that include landlines and mobiles as well

Issues with charsets from NUC ERP system to UC BI System

Hi guys
We are actually in the process of Upgrading and Unicode Migration for BI and ERP Landscape
BI Landscape is the first stage so we are facing an issue with char sets
ERP system generates a plain txt file which is later pick up by BI system to run a chain process.
This plain txt file, contains Spanish Special chars which are causing the issues.
I have found a note which converts file at OS level from one code page to another code page
Is there another more transparent solution, like forcing NUC ERP System to generate the plain file in a format which can be read by UC BI System
Best
Martin

You have posted in wrong space. Please post your query on the correct space so thate xperts could help you.
regards
manu

Issue with load from livecache

Dear all
In our APO system we have encountered a strange issue with data loaded from livecache into the infocube.
Problem is in the infocube, where there are two requests with a forecast version data with the same amount of data.
When I look in my infocube in APO I see e.g. the two following request IDs for a given product:
REQU_4CZ4SQ5PSM9V5PHJCHTIS24GK is the most recent load from Livecache (replacing any previous livecache loads).
APO_R43U3KZLM0V3WVK112YEK3KKLE cannot be located. It is not available on the infocube manage section
Ultimately this results in double data for this given product.
Do any of you have an idea as to what this APO_* request could be triggered from?
This is the input from the BW-team:
This indicates that an APO program has modified the infocube data without updating the request tab of the manage infocube. But it has updated the request id of the data which is transformed. With subsequent loads into the infocube, these records are split based on different request idu2019s, and loaded collectively into BI.
I hope you can help me out.
Best regards,
Anders Thinggaard

Hi Visu
It seems I made a typing error in my description of the problem. It is of course the DESTINATION combination, not the SOURCE combination, that is written into the infocube when realigning on the infocube.
This, of course, creates the request ID starting with APO. Besides that I get the request starting with REQU when I load from livecache using an infopackage. So far so good.
What confuses me though is that when I load back into livecache (load my planning area) is seems to pick up the correct amount of data (not taking the APO* request into account) whereas my load to my external BW out of my APO infocube seems to pick up both the REQU* and the APO* requests, resulting in dublicate data.
Have you had this challenge as well?
My first idea is to make the BW team make some ABAP coding leaving out any request ID starting with APO*. However it seems to me that this is a stardard functionality of APO, and I'd like to get to the bottom of this...
Best regards,
Anders
P.S. As I understand, the copy logic only dertermines whether data from source combination is added to or overwriting the data for the destination combination.

Render issues with footage from Color

I'll start off by noting that this issue only happens running Snow Leopard.
I am having terrible problems when trying to apply and render some effects on footage which has come from Color…specifically, the Bad Film filter. Either at the render completion or during the render, I'll get all sorts of "screen draw" problems, like green and pink pixels everywhere. Sometimes they will only appear in the Canvas window, but if I launch any other app, the new app's is nothing but the screen error and the app is useless, thought I think it still functions, though useless to the point that I'm only left with having to restart. Occasionally, it'll throw that error telling me I must restart (in several different languages). I have occasionally had success with very short clips, but anything much more than 30 seconds is useless. I would think this is a hardware issue; however, it only happens under Snow Leopard and is not an issue with Leopard.
I have performed a clean install from a zeroed disk with both 10.5 and 10.6 and upgraded to the latest point release. I'm not really sure where to go from here. Has anyone experienced anything like this? I have the early 2008 8-core 2.8GHz Mac Pro with 16Gigs of RAM and two monitors connected to the ATI HD 2600 XT. I've also tried rebooting to just one monitor, but no dice. I've run hardware tests from TechTools that came with my ACD's AppleCare and all appears rosy. Real Time effects seem to work just fine and I don't have issues with all effects that require rendering. Most befuddling, I'm having no issue on clips that have not first gone through Color. Strange, huh?

Sorry about that.... The footage is ProRes422 1440x1080 going into Color and ProRes422 1920x1080 coming out. I've tried exporting at 8-bit Uncompressed out of Color with the same results.
Originally, this is 24p footage from an HV20 taken to ProRes via this: http://support.apple.com/kb/HT2410 method.
I'm still just not sure why this only happens in Snow Leopard, while everything works peachy in Leopard, though I think you may be on the right track with this being an FxPlug filter. I know I would occasionally get messages stating, basiclly, "Your GFX card is a wimp, these filters won't work" when trying 10-bit sequences under Leopard, thus I tried the 8-bit setting with this issue and all without any luck. I'll will try "Light Rays" and "Bloom" this evening to see if I get the same result.
To make this stranger still, Bad TV seems to render just fine, as far as I can recall, only Bad Film give me problems. I suppose this particular filter may not be compatible with my configuration. Perhaps, I shoud be getting that message instead of a crash.
Message was edited by: Carl Spackler

OPM 10.3 - Conversion Issue with Screens from 10.2

Hello All,
We upgraded one of our rulebases to 10.3 today.
On build and debug, our summary screen seemed out of order
In reviewing the screen, it seems that the screen items have been sorted, with the labels at the top and the goals at the bottom.
The other screens appear to be fine.
Any thoughts?
Cheers,
Allan

Hi Gibson
I think u can try this...although its not exactly the same issue we had but somewhat similar...compatibility issue...
On OPM v10.3 u create new project...add all the files from the project folder u had created on version 10.2 to the new project u have created on 10.3...all the files...word files, excel sheets, properties files, screen files etc...now u try to build and run the new project...it worked for us...if u have done any changes to the appearances of the screens with html or css then copy all the files from folders under this folder C:\projects\<ur project name>\Release\web-determinations\WEB-INF of the project created in the 10.2 to the same folders under the same directory of the project u have created on 10.3...I hope this will help
Cheers and Regards
Bijay Mishra

HP Officejet 6800 e-All-in-One-series - issues with printing from MSWord / Setup

I have been trying to set up the HP Officejet it seems for over 2 weeks - it works then doesn't - I dont want to return it but if it doesnt work proper .... I removed and reinstalled software - yesterday printed from MSWORD - today its not --- it will print pages off the internet but not from my MSWORD - its set up wirelessly - so frustrated - and what's worse is I am HP lover and now I cant even find a HP support phone number to call and I am pretty sure I remember being told while I was making my purchasing decision I could call HP for support with reference to set up when I bought the printer. Can someone tell me if the printer then not working is normal for this printer - with reference to printing MSWORD etc and if not is there some special place I am suppose to click to fix - thank you in advance

Hi @TheoD,
Welcome to the HP Forums!
Sorry to hear about your frustration with not being able to print from MS Word with your HP Officejet 6800 printer. But I am happy to help!
It is definitely odd that this printer is not printing from MS Word but will from the Internet. I am not seeing much documentation for an HP Officejet 6800, is it possible that you have the HP Officejet 8600? Just double-checking to make sure I provide the correct information. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number.
For further assistance, I will also need to know what Operating System you are using. Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
If you are using Windows, please try our HP Print and Scan Doctor, and let me know what happens!
Otherwise, if you still prefer to call someone, please call our phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Upgraded to TimeCapsule and now issues with AirPrint from iPhone and iPad

Okay. I bought a HP 210a air print printer. It was working great with my Linksys router and my iPad and iPhone worked with it perfectly. Since that time I have recently bought a new new 2TB Time Capsule and just recently set it up. The old router is no longer hooked up. Since switching over to the new router, nothing prints from the iPhone or iPad. So here are the details and I am hoping I am just missing a step:
1. I think it is important to point this part out. After setting up the new router, and before discovering any of this, I turned on the HP printer. Upon doing so, the printer informed me a software update was available from HP so I downloaded it and it appeared everything was fine.
2. After the update, I tried printing and nothing. Duh, the printer was still looking for the old router. I ran the built in HP wireless setup wizard on the printer and it pointed to the new router fine. I tested the connection using the test feature on the printer, and it printed a report that all was fine and that it was now pointed at the Time Capsule, great signal, etc...
3. I went to my iPhone and iPad, made sure they were pointed at the same network as the printer, and once again the printer appeared on each device as an AirPrint printer. Great I thought, so printed a test a page from each device. Both pages printed. Now here is where it gets weird.
4. I tried to print a second document from the iPad and iPhone, nothing. I tried a picture. Nothing. It still shows eveything setup correctly, the HP shows as the AirPrint printer and connected, but no matter what I do, it nothing is printing from either device. I've tried resetting my network settings on the iPhone and iPad and pointing to the network again, re-running the HP setup Wizard on the printer. They all show that everything is fine. The iPhone and iPad connect to the network fine, both show the printer when I go to print. However, after I hit the "print" button on either device, it shows like the document is being sent but NOTHING happens on the HP. It is very frustrating.
The WiFi is working fine, I can surf, email, etc... so the router is working properly. So what am I missing? Could the HP update somehow have caused the problem? I have to believe that between the update and the new router that somewhere I am missing a step. Any help is greatly appreciated.

If that doesn't work, try power cycling your router, printer, and your iPad/iPhone in that order. To do this, follow these steps:
Unplug the router and printer from the power and shut off the i-devices. Let them sit for about 30 seconds and then plug just the router in.
Once the router is completely back online (usually takes about 30-60 seconds) plug the printer in. Wait until it is back on its home screen.
Turn the i-devices on.
Try to print again.
Let me know if this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Issues with acquiring from multiple GigE cameras

Hi,
I'm trying to build a simple app where three cameras are running simultaneously and can optionally record AVIs with timestamped data appended to each frame. I'm not having the recognition issue (all three cameras are seen through either a network bridge on the PXI system I'm using or an external GigE switch), but they seem to be failing during the grab process. When I have more than one running, green noise in the form of horizontal lines appear on the images, and usually all but one of the cameras will eventually drop out. No such problem exists when triggering only one camera. It seems a lot like the frames are colliding somehow; can grabs from multiple cameras not occur in the same loop?
As for the program set up, it's mainly a modified version of the "write" case in the AVI Read/Write with Data example. The user is prompted to save the avi's and a text file, three camera and IMAQ sessions are opened (with unique names), and then the program loops until the stop is hit, with a true/false case for actually recording the data. Frame/sample rate is controlled by the millisecond timer wait function. The problem happens regardless of acquisition speed (even at 1 frame/sec), and the CPU nor the network link seem to be anywhere near fully taxed.
Thanks,
Brian

Thanks for the suggestions guys. I put the packet size back to 8000 on both cameras. So far, I'm still seeing green horizontal lines. Here's what I've tried and what I've learned.
1. Set Acquisition Mode in VBAI to Continuous - Immediate
2. Tried to reduce the bandwidth demand of the cameras by setting Acquisition Frame Rate (Abs) to 3.0
3. Checked the Device Max Throughput under Transport Layer in MAX
a. Color Pilot camera is 30.4 MB/sec
b. Mono Pilot camera is 11.1 MB/sec
4. Checked the Bandwidth Assigned under Transport Layer in MAX, and it is 125 MB/sec
5. Add 30.4 to 11.1 and get 41.5 MB/sec so there is 83.5 MB/sec bandwidth available.
6. Subtract 5 MB/sec for overhead and 6 MB/sec for each camera for Bandwidth Reserve (set at 5%) and there is still 66.5 MB/sec left over
7. Open VBAI, and then open an inspection in which the Mono camera is configured (mad sure to load the defaults that were saved in MAX)
8. Launch MAX and try a Grab from the Color camera
9. See green lines of death....
So, I've narrowed my experimentation down to just two cameras and I still have acquisition problems. I've got to be missing something else. Note that there is no camera attribute section called "Advanced Ethernet" only "Transport Layer". Perhaps that was camera-specific.
I think I'm going to have to use dedicated Ethernet ports for each camera. It is disappointing since this architecture should work given those bandwidth concessions made for frame rate.
- Dan

My ipod touch will download songs from itunes, but has issues with songs from my CD's.The songs show up on my ipod

My ipod downloads songs from itunes and plays them just fine. However, when I added my songs from my CD's to it, they downloaded but don't play like they should. They either don't play at all or randomly play in the middle of the song. It has nothing to do with the start time either because they all say that they start at 0.00. I synced the CD's correctlly, so that is not the issue. The songs from the CD's never start playing when I choose them. What can I do to fix this issue?

Have you looked at the discussions on the right side of this page under the heading "More Like This" with your same problem?

BO XI issues with properties from BPC

Similar Messages

Maybe you are looking for