BO XI R 3.1 SP 2 fix pack 2.1 - Database error occured - "Error on fetch"

Hi Ingo,
As per SAP recommendation we have upgraded our SAP BI system from BI 7.0 to BI 7.01 (Enhancement Pack 1).
And BO XI R 3.1 SP 2 to BO XI R 3.1 SP 2 fix pack 2.1.
After applying fix pack 2.1 on BO server, suddenly the reports on one of the Universes throwing error as follows:
A database error occured. The database error text is : (CS) "Error on Fetch". (WS 10901).
We have to apply Enhancement pack (SAP BI 7.01) and fix pack 2.1 (on BO) before this weekend on production environment.
Can you please help us if you are having any idea why this error occurs upon BO fix pack 2.1 installation.
Regards,
Ravi Kumar Garre
Edited by: Ravi Kumar Garre on Dec 3, 2009 3:02 AM

Hi Ingo,
The query works well in SAP BI side using RSRT / BEx Analyzer.
I have created a new universe on same BI Query, still the problem exist.
We have created one new BEx query on same InfoProvider and then Universe. It works fine.
Regards,
Ravi Kumar Garre

Similar Messages

Fix Pack 3.5 Installation Error

I have the same issue, the install is bad.

The Xcelsius 2008 FP3.5 file was replaced, issue should be solved.
Thanks,
François Imberton

Xcelsius 2008 Fix Pack 3.4 (FP 3.4) installation error

Hi,
I have Xcelsius 2008 Enterprise FP 3 running on XP 32-bit with Office 2010 just fine.
However when I try to install FP3.4 I'm getting the error: "Xcelsius 2008 requires adobe flash player 9,151 or later". I've confirmed I've flash 10,2,153,1 installed.
Any ideas?
Thks,
William

Hi,
If you search this forum , you can find some threads dedicated to this issue related with compatibility with office 2010.
As of now Xcelsius 2008 (5.3.5.0 which is the latest one) does not support Office 2010. you can find a way out to install Xcelsius, but later you have to face issues functionality as well as performance wise and also when ever you try to install latest Fix Pack it will throw error because installer perform a check before installation. SP 4 is going to support office 2010 and also Crystal Dashboard Design 2011. As said above Ghost path is one of the many workaround.
So I would suggest you uninstall the 2010 Office and install office 2007.
Good Luck & Keep Posting.

No sample database in Fix Pack 8.1.1.3

Greetings, everyone.
Currently, we run Siebel 8.1.1 on a Windows 2003 R2 Server. We want to install Siebel Fix Pack 8.1.1.3.
In order to do so, I downloaded all 4 files from patchset 8.1.1.3 21219 SBA SEBL_ARU, unzipped them and created the installation image with Windows_ImageCreator.exe. The process completed successfully. However, we noticed that in the "Select products for image creation" screen there was no choice for Siebel Sample Database. And, indeed, the Installation image has no ..Siebel_Sample Database subfolder.
This seems wrong because at page 454 of document "Siebel Maintenance Release Guide, Version 8.1.1.x, Rev S" there are instruction to install the Fix Pack for Siebel Sample Database.
Has anyone experienced this before?
Thanks for any help.
Roque Daudt

Hi,
Recently I have installed Siebel 8.1.1 version on Windows Server and downloaded the Fixpack version 8.1.1.4 version.
I have extracted the JAR files using Image Creation and am unable to find the "Sample Database" setup.
I thought we wont require the Fix packs for sample database. Fix Pack for Tools & Web Client is enough.
Regards,
Guna M

Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
Kumar

Wilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar

Crystal 2008 Fix Pack 1.2 Changes?

I have 2 questions.
1) What has changed in Crystal Reports Fix Pack 1.2 (Posted 01-13-2009)?
2) Is there a mailing list or RSS feed or something I can sign up to so that I am notified when a new HotFix / Service Pack is released for Crystal Reports 2008?

Naveen,
I did as you instructed but my problem is still unresolved...
I downloaded 'cr2008sp1_fp12.exe' from the [Business Objects Download Page|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
I ran the application and browsed to where the files were extracted in my case (C:\Documents and Settings\Administrator\Local Settings\Temp\package)
After investigating all the files I was unable to find a 'ReadMe' file.
Here is a summary of what I did find:
1) CrystalReports.msp
2) license_xx.xxx (License files in many different languages and in TXT, RTF and PDF)
3) What appears to be 'localized' versions of the same 'CrystalReports.msp' file
If anyone can give me a specific list of what is changed I would really appreciate it.

"Severe database error" makes it impossible to sign into Story desktop application. How can I fix?

When I open the Adobe Story desktop application and sign in, I immediately receive the following message:
"ERROR:
Sorry, your Story Free subscription does not allow access to the application in online mode. You can work in the offline mode to retrieve your files."
I want to work in offline mode, so I click "Work Offline."
Immediately after I click this, I got another error message:
"OFFLINE DATABASE ERROR - ADOBE STORY
Adobe Story has encountered a severe database error and will not be able to retrieve some of your data from your last session. You can recover rest [sic] of your data by either restoring your account to the last backup date or by synchronizing it with your online account."
I'm then given two options:
Restore to the last backup date [GRAYED OUT, because I never backed up]
Sync with my online account( Sign in required )
I choose the only option I can, then click "Continue."
This immediately cycles me back to the opening screen, "Your next great story starts here," with the options "Learn more" or "Sign in."
Every time I click "Sign in," Adobe Story repeats all the steps listed above, making it impossible for me to actually use the program, UNLESS of course I upgrade to Adobe Story Plus, which I don't intend to do.
Is there any way my account can be fixed to allow me to use the Story desktop application without all these error messages? (I've tried uninstalling and reinstalling already.)
I just started using Story, so I have no earlier projects to retrieve. Story can wipe my account clean if necessary, it doesn't matter.
However, I've run into so many problems just trying to *start* using Story that I'm really worried about this program's reliability, especially for the middle of a production. Hopefully after further testing I won't run into so many problems.

Hi,
try this
open item Ifile

Fix network connection timed out error 3259

How do I fix network connection timed out error 3259?

Here is apple article on this error. Basically, disable your firewall and other security software.
http://support.apple.com/kb/TS2799

How I fixed the 'network host busy" error

I've been down for a day solving the "network host busy' error.
First, I had fits trying to hook up this HP to my system. Here's the thread on that:
http://forums.techguy.org/networking/858081-laserjet-4500-mac-osx-10-a.html
Once all that was done, it was working.
The system was off and sometimes unplugged over the course of the evening.
I could not get it to work again.
It turned out that somehow during the course of events, the ip number of the printer had changed. I printed out the configuration page directly from the printer's configuration menu, and reset the ip address to match the new one.
Protocol in this case was HP Jet Direct socket.
Hope that helps someone out there. It looks like there are a lot of people tearing their hair out over this message and that there is no one solution.

I just found a solution to this problem and thought I would post it here, too.
I'm using a HP Photosmart C7280 with 10.6.1
Ever since updating to Snow Leopard, I kept receiving the "Network host busy" message. Today, I thought I would try running the network wizard feature on the printer itself, and after the printer connected to my router and I entered the password, the problem fixed itself. No more error message.
I'm not sure if this will work for everyone, but it did for me. Such an easy solution for such a headache-inducing problem.
Message was edited by: TNTWhite

How to fix the .pdf file with error "invalid annotation object"

how to fix the .pdf file with error "invalid annotation object"

As long as the PDF opens, then just try saving it to a new file name. There may be a preflight script that would help troubleshoot the issue.

BO XIR 3.1 Edge- Problem installing Fix Pack 1.1

I am trying to install Fix Pack 1.1 for XIR3.1 Edge.
The BO installation is installed on c:\businessobjects
When asked for Server Instance and Service Name:
SERVER INSTANCE = Server name
SERVICE NAME = defaults to TomCat55
However, I get this error. Where am I going wrong?
Application server instance not detected in directory '$/conf/Catalina'.

Hi Joe,
try localhost as server name.
Regards,
Stratos

Report Selection Formula Error with Crystal Reports 2008 SP3 Fix Pack 3.5

Hello,
My name is Carlos, and I would like to report a defect found in the Crystal Reports 2008 SP 3 Fix Pack 3.5 Runtime that is affecting the majority of our reports. As well, I would like to ask if there is a simple workaround that does not involve updating hundreds of reports.
The issue is that the runtime engine incorrectly returns the report selection formula. I have included sample code showing what I mean.
To reproduce;
1. Create a simple report that has a date range filter like:
({Orders.Order_Date} >= {?START_DATE})
AND ({Orders.Order_Date} <= {?END_DATE})
2. Create a test app as follow that loads a report using the following code:
ReportDocument rpt = null;
try
rpt = new ReportDocument();
rpt.Load("TestReport.rpt");
this.txtMessage.Text = string.Format(
    "ReportSelectionFormula:{0}{1}",
     Environment.NewLine,
rpt.RecordSelectionFormula);
catch (Exception ex)
this.txtMessage.Text = ex.ToString();
3. Install Crystal Reports 2008 SP3 Fix Pack 3.5 Runtime [https://smpdl.sap-ag.de/~sapidp/012002523100006341772011E/cr2008fp35_redist.zip]..
4. Execute the app.
At this stage, the screen shows
ReportSelectionFormula:
(   ( NOT {Orders.Order_Date} >= {?START_DATE} )   AND   ( NOT {Orders.Order_Date} <= {?END_DATE} )   )
The expected value is:
ReportSelectionFormula:
(   ( {Orders.Order_Date} >= {?START_DATE} )   AND   ( {Orders.Order_Date} <= {?END_DATE} )   )
If we were to repeat the same test above but use the Crystal Reports 2003 SP3 runtime (i.e. no Fix Pack), which can be dowloaded from [https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip], we would get the correct report selection formula. A side-effect for this incorrect report selection formula is a runtime exception complaining about an errorkind and a boolean being expected.
Do you know if there is any workaround that I can apply in code, perhaps a different Fix Pack? Is there a Fix Pack expected to be released soon? It is not practical for us to update our reports and use a different style in the record selection formula because we have many such reports, and our customers probably have even more.
Thank you.
-Carlos.

Already a known issue, here's the [KB 1584095 - A boolean NOT is added at the beginning of a record selection formula when the report is loaded by the Crystal Reports .NET SDK |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533383334333033393335%7D.do]

Fix Packs (4.1 & 4.2); Wont Install; Error message: CRC Failed in package

We receive the following message when we try to install fix packs 4.1 and 4.2. The fix pack will correct issues identified with the installation of service pack 4. The error message states: "Some installation files are corrupt. Please download a fresh copy and retry the installation".
I did a second download and receive the same error message. Has anyone else run into this problem while downloading the identified fix packs (4.1 & 4.2)?
Dooley

Are you downloading from the new SAP site or the older BO ESD site located at http://businessobjects.subscribenet.com?
I know on the ESD site there is a link for "more details". This will bring up a page with the md5 sum of the file.
After downloading to your workstation you need to run a md5sum program against the downloaded file and make certain that the md5 sum matches what is listed on the ESD site. If it does not match, then your downloaded file is corrupted.
If you search the internet there are many free md5sum programs. It is usually already included on most unix and linux platforms with the command md5sum.
Are you downloading windows or unix patches?
If unix, do not use a windows zip utility. Always transfer the files to your unix server via binary mode ftp and then unzip/untar using unix utilities.
--Jack

Looking for evaluation of BOE XI 3.1 Fix Pack 2.2 Upgrade Experience

Hello,
I have a customer interested in upgrading from BOE XI 3.1 Fix Pack 1.2 to Fix Pack 2.2 which has recently been released and expectedly improves the SAP BW integration. The customer primarily uses Webi and Xcelsius. Prior to upgrading to Fix Pack 2.2, they would like to know of other upgrade experiences in terms of stability, regression testing, issues, new functionality, etc.
If you have any such experience, please let me know your feedback by responding to this thread. Kindly include which Fix Pack you were on prior to the upgrade in your response.
Best regards,
Renato

Hi Renato,
Looks like you have posted this question in wrong forum Please post it to "Business Object" forum for quick replies.
Hope this helps.
Regards,
Rashmi

Finding Download for SAP Integration Kit Fix Pack 3.1 / ADAPT01412706

Hi all,
by using Crystal Reports 2008 V1 SP3 in combination with SAP Integration Kit 3.1 (SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B)) i get an error during the inportstep of the transports in our BW System.
This error is descriped and solved in Note 1484086
(https://websmp130.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134383430383626)
Following the Notesteps there is one conclusion using the transport files from the "SAP Integration Kit to FixPack 3.1" . My problem is to find these named Fix Pack in the download area of the Marketplace.
An Fix Pack for the SAP Integration Kit itself seems to be not aviable,
therefore I tried several downloads beginning with:
Crystal Reports 2008 Fix Pack 3.1 - Click Once
Crystal Reports 2008 Fix Pack 3.1 - Redist Install
Crystal Reports 2008 SP3 Fix Pack 3.1
there are no transportfiles in any of these packages.
If any from you have some idea where to find the right transport files, please let me know.
Regards
Marco

Hi Marco,
you can go in Sap Support Portal -> Software Downloads-> BusinessObjects Downloads
in the left select "Search for Software Downloads" then in "Search Term" input:
BOBJINTGRSAP03P
You'll retrieve all available versions of IK SP3 with related fixpacks.
Regards.
Roberto.

BO XI R 3.1 SP 2 fix pack 2.1 - Database error occured - "Error on fetch"

Similar Messages

Maybe you are looking for