BO XI R2 to BO XI 3.1 upgrade - Best Practice

Hi Experts,
    We are using BO Xi R2 version now. We would like to upgrade BO XI R2 to BO XI R3.1 version. Could you please suggest me
How to do that. Could you please provide me step by step how to go about this task?
    Could you please tell me what are all the advantages and disadvantages of this activity? Is there any problem if I migrate the reports and instance from my BO Xi R2 version to BO XI 3.1 version After Installation of BO XI 3.1.
     Suggest some best methods to do this activity.
Regards,
Sridharan Krishnan

There is no step by step upgrade because every customer system is different. XIR2 can be upgraded or migrated. Typically migrated is the safest option (because it doesn't require both versions to be installed on the same server) .
Migration would require that you have your XIR2 server and XI 3.1 on a different server then you could use the [import wizard |http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_bip_importwiz_en.pdf]on 3.1 to bring everything over.
Typically customers would hire a consultant for complex migrations.
Regards,
Tim

Similar Messages

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

And/or if statement in rtf templates.

Hi all,
I'm using XML Publisher 4.5.
I have created a word template file (rtf) for my reports. I need to be able to show some content in the template file by using and and/or if statement.
fx. <?if:doc_type='STANDARD'?> OR <?if:doc_type='DEFAULT'?>
How can I do this?
In advance thank you.
Best regards
Kenneth

Hi D,
Thank you for your answer.
I have seriously thought about that solution; but I don't think it's a smart way to do it.
If i do it like that, i need to copy the whole table and paste it inside the if statements.
I have two xml elements that I need to make the decisions on. POH_PO_TYPE & CP_RELEASE_NUM.
POH_PO_TYPE can be: STANDARD, RELEASE or BLANKET.
CP_RELEASE_NUM can be: '' or N
If POH_PO_TYPE is RELEASE AND CP_RELEASE_NUM is not ''
OR POH_PO_TYPE is STANDARD
OR POH_PO_TYPE is BLANKET AND CP_RELEASE_NUM is ''
THEN show table (which contains the whole PO).
It shall show the content of the PO in any of these cases.
BR Kenneth

How can different family members in one household ...

Hi
I want to subscribe to a skype number for my daughter and I will be paying for it. How can this be done? I went ahead and purchased another number today. Will she need to set up a totally new account or will she be under my account using a different number?
Thank you in advance,
peacejourney

MaxL does not have commands to alter an outline directly, except the reset command which can delete all dimensions but not members selectively. The best you could do would be to run a rules file (import dimensions) using a file that contains the members you want to keepload rule for the dimension. As typical the warning is to test this first before you do it on a production database

Cannot open and update IPhoto after upgrading to OXYosemite

From the App store, I downloaded and installed OXYosemite. There are 2 more updates available: iPhoto and iMovie. When I try to upload them, the notice I get is "Update Unavailable with This Apple ID This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
I have 2 apple IDs when I inquire about my ids. Signing in App Store with either of them, doesn't resolve the problem. I get the same notice. iTunes, Mac, mobile downloads, all use the same apple IP, only for the computer downloads from App Store isn't working.
What should I do?
Thanks, Sev

I have the same problem and can't find out how to correct it. Unable to update iPhoto or iMovie .. I get the same message as above user. Help!

Open vi error for report generation toolkt

Originally it works fine.
Now I upgrade to win7, LV9 and office2010.
To open the old program by 8.6.1, I reinstalled LV 8.6.1 and report generation toolkit.
But still got the error as attached.
Any suggestion, thanks.
Attachments:
ss.png ‏184 KB

1. MS Office 2010 is not yet supported, since it's still just a beta. I believe there are couple of changes that Microsoft make, and it could cause a problem.
2. LabVIEW 8.6.1, and all its toolkit is not supported on Windows 7. This could cause a problkem also.
In conclusion, you should use LabVIEW 2009, Report Generation Toolkit 2009, Windows 7, and downgrade office to XP, 2003 or 2007.
More information: http://digital.ni.com/public.nsf/allkb/C9408B9F08D711E786256F3300701D01

Open DNS follow-up report

Interestingly, after a very positive experience by adding the open DNS numbers 208.67.222.222 and 208.67.220.220, I found today that every time I tried to open Safari it knocked me offline. So I've now resorted back to the number originally assigned to me.
What's going on with Safari?

Jake,
One Verizon DSL account; one Westell 6100 modem
Check with Verizon and find out what the max download / upload speeds should be.
If this is the plan you purchased: http://www22.verizon.com/residential/highspeedinternet/
*"And we’re constantly looking for ways to make our DSL faster—recently upgrading our Starter plan to 1 Mbps* download and our Turbo plan to 7.1 Mbps."*
1 Mbps download / 7.1 Mbps is hardly high speed.
You can check your upload/download speeds here. http://www.speedtest.net/
To realize faster download and uploads speeds you would need to upgrade your service.
This is more then just a DNS issue.

Itunes wont open and shows error report.

this is what i get when i open it. it was working fine last night. i opened it and it said updating library, but then i played music without a problem. this morning i uninstalled quicktime cause i never use it. so i think that might have messed it up. so i uninstalled everything and reinstalled itunes 7.2 and now i get this.
http://img118.imageshack.us/my.php?image=untitledra4.jpg

iTunes uses QuickTime for audio and video playback. So it's best not to uninstall it if you want to use iTunes.
When that message you're getting cites that "Offset: 10004000", almost invariably it's caused by a broken QuickTime. So let's try swapping that out again, this time applying some additional explicit precautions.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Apple Mini-DVI to Video Adapter Questions

I'm in the processing of producing an instructional video using an Intel Core Duo iMac and iMovie. This content will be distributed primarily via broadcast over cable TV. Considering this, I'd like to be able to edit and view my dv footage on a TV monitor as I work.
I was told by the Apple Store person that the Apple Mini-DVI to Video Adapter (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/6314001/wo/jY18n ncCp3Nx2tYjws52iCaPkH1/1.0.21.1.0.8.25.7.11.2.3) will enable me to
1. Mirror my desktop to simultaneously show me what my iMovie edits will look like on a TV; and
2. Enable me to edit in iMovie using the TV as my desktop.
Am I understanding the capabilities of the Apple Mini-DVI to Video Adapter correctly?
Regarding Cables
1. I currently use an RCA composite cable to view dv footage from my camcorder directly on the TV. Is this the same cable I'd attach to the Mini-DVI to Video Adapter?
2. The DVD recorder/player my TV signal is routed through has an s-video port. Is there a benefit to using an s-video connection in addition to/or instead of the RCA connections?
Thanks for helping me understand this setup scenario!
core duo Mac OS X (10.4.6)
core duo Mac OS X (10.4.6)

Ditto to Karsten's post:
"Mirroring" a Mac's output to a TV, or plugging in an adaptor to provide a display on a Mac's screen and simultaneously on a TV ruins the Mac's display while this is happening by lowering its resolution. Ugghhh! (..I've tried this several times, in order to get a 'TV' signal out, showing the Mac's desktop, but it's hopeless..)
Karsten's method is the best - output to camcorder via the normal FireWire cable, and plug a TV or monitor into the camcorder's A/V Out socket!
[..Note, though, that Matti has pointed out that - what was it..? - during editing, some updating of the TV-thro-camcorder display doesn't work correctly. I can't remember exactly what the problem was, and I don't see it mentioned on Matti's Bugs Page, but there was some slight oddity. Nevertheless, this is still the best way of viewing on a TV or monitor..]

Using mini-DVI to VGA adapter to Samsung display

I have 2009 late model of mac mini, The text on display looks washed out, not clear or sharp at all from day one, I thought it was the old model of monitor, tried the same cable to another monitor on another computer, SAME. so I thought the problem could be the cable or adapter.
It's hard for me to believe is the signal from computer. I'm using VGA adapter made by Dynex bought from Best Buy.
Anybody has suggestions?? Thanks

Yeah, My old Samsung is lcd synmaster 17", bought many years ago at around $1000. Crazy, crazy price looked back. It's fine when I used it on the retired old Dell. It must be the adapter, trying not to buy another VGA adapter, could not image my next lcd will use one, anyway.
This cable has only 14 pins vs 15 pins on the other cable, not sure if it matters?? Or if Safari has anything to do with it??
Thank for you reply...

Mini-DVI to Video Adapter: For TV Viewing?

The Apple-Salesperson sold me a Mini-DVI to Video Adapater to send pictures to the TV from my MacBook. I get sound on the TV but not the slids. The TV picture only displays the computer's main screen.
Is this the correct adapter? I see other threads here use something different. Is there a special setting I need to change?
Thanks,

With your TV hooked up to your Macbook, you should be able to view anything on your computer. If you have all of your pictures in iPhoto, your best option is to use FrontRow by using the remote.
(make sure your displays are mirroring eachother, Preferences>Displays)

Mini DVI to Video Adapter - S-Video Resolutions / HDMI

Hello,
I just got my Mini DVI to Video Adapter and I using a S-Video cable to plug to my HD LCD 32'' TV.
When I connect everything, the resolution drops from 1280x800 to 1024x768.
How can I change back to 1280x800?
I don't know but I'm kind of disappointed with the QUALITY of the video... is there any way I could improve this? Perhaps using a Mini-DVI to HDMI Adapter? Does it exist? Will upgrade the resolution and/or the quality of the video?
I've read that audio is not supported using the Mini-DVI. To be honest, I don't really care about the audio... I can use the analog. But I'm very very disappointed with the quality of the video...
Thanks anyone

Well,
Based on what you said, I should have three options:
A: MacBook -> MiniDVI to DVI Adapter -> DVI to HDMI cable -> TV with HDMI input
C: MacBook -> MiniDVI to DVI Adapter -> DVI to DVI cable -> TV with DVI input
B: MacBook -> MiniDVI to HDMI Adapter -> HDMI cable -> TV with HDMI input
What should work best?
My TV does not support DVI input, so that's kind of narrow it down, right?! Leaving options A and C.
I don't have any of the adapters. In both ways I'll end up having to buy stuff. Which is less expansive?
Thanks in advance
Cheers.

Creative Mediasource ID3 Tags - Edit more than one year at a ti

I use a 60gb Zen Xtra with Mediasource. I take pride in the ID3 tags of all my files especially those of my Jazz collection and my player is well organised. The only thing I have to ask is - is there any way of editing the year of, say, an entire album that was recorded in 959 for example all at the same time. It lets me do this for Artist, Album and Genre but not year. Is there any upgrade in software I can get or am I just missing something here?
Thanks in advance for your input,Matt

Shucks, I tried and you can't seem to do it. A curious oversight.
You can either use another copying program like which will let you do it, or simply get a mass tagger (but you will need to edit the tracks on the PC first, then copy). For some mass tagger recommendations look here in the Zen FAQ at Nomadness.net.

How can I see Calendar event END times at a glance?

How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.

It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback

How to load a specific view in a browser

Hi Guys,
In my application, I hav 3 views..I need to set particular view at window level..So How can I do that..Thanks in advance

Good day,
Please check my reply in the following thread.
Re: Change of default view in a web dynpro window
Regards and Best wishes.

Is there a way to open two months at the same time in iCal?

I have recurring events for every month in 2009 and want to replicate them in 2010. I do not want to just extend the stop date because there will be subtle changes to the 2010 items that I do not want changed in the 2009 versions. I would ideally like to open Jan 2009 and Jan 2010 next to each other and copy the 2009 event to the 2010 calendar (the appointment copy does not copy the recurrence info which is good). Is there a way to show either two instances of iCal running or 2 month windows?
Thanks!

Hi,
If you activate iCal's Debug menu, you should find it has a 'New Calendar Window' option (Cmd-L). It is a bit of a knack to cutting and pasting correctly between windows.
Best wishes
John M

BO XI R2 to BO XI 3.1 upgrade - Best Practice

Similar Messages

Maybe you are looking for