BO4 - Data tab shows date as 01/01/1970 but actually now on database

Hi,
Using bo4 webi and noticed whilst report correctly shows date as blank/null in report (no object format in universe) but date in data tab shows as 01/01/1970.
Any idea why this is the case?
Thanks

Hi,
Is that what you were expecting?. Seems to me like there needs to be patch upgrade.
We had the same issue on SP1 and when upgraded to higher version Dates were showing correct.
Did you compare with BI Launchpad and WebI rich client tool?. Were they showing the 01/01/1970?.
How about when running a BEx query?.
Thanks,
Jothi

Similar Messages

My hotmail tab showed the number of emails receved but has stopped

I have tabs along the top of my page,the hotmail tab showed the number of emails received,but has stopped showing them,can you help?

Hotmail has been having some hiccups lately. Try clicking the grey bar which has the word "Inbox" in it.
Also, click "Help" | "Check For Updates" and update Firefox to v3.6.19
Similarly, please visit the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary. Out of date plugins expose your system to attack.

Windows 10 shows the 2nd monitor has 1920x1080 but actually it is 50% less around 1080x840

The resolution of the 2nd monitor, a Vizio VF551XVT 55-inch 1920x1080 HDTV connected through HDMI cable, shows 1920x1080 (Recommended) on the Windows 10’s Display Screen Resolution setting utility but the true resolution of the 2nd monitor is less than 50%; around 1080x840. All applications on the 2nd monitor displayed their header & boarder frames twice wider on screen, which waste/occupy lots of the 2nd monitor’s display area. Please advise how to correct this critical lower than the set/expected resolution problem of th 2nd monitor. Thanks. The 1st/primary monitor in this case is a mobile PC Display (1920x1080), Lenovo Z710 Intel i7 4710MQ notebook with NVIDIA 840M GPU. Previously running under the Windows 8.1 OS with the same configuration, the 2nd monitor resolution was also displayed incorrectly but just initially right after the Windows 8.1 reboot, i.e. 2nd monitor shows 1920x1080 resolution but actually the 2nd monitor is about the same as Windows 10, the actual resolution is much/50% fewer than 1920x1080. However, the resolution of the 2nd monitor (HDTV) under Windows 8.1 can be corrected (worked around) by switching the main display from 1st to 2nd monitor, then switching main display back from 2nd to 1st, but such Win 8.1 work around doesn't work for Windows 10 OS . Also, please advise whether Lenovo, MS Windows or NVIDIA is responsible for the displays re-position issue. The re-position issue is, when a TV, PC, shared 2nd monitor is disconnected to watching TV, etc., Windows OS currently moves all the display positions, both active and minimized displays, from 2nd monitor to 1st/main monitor, but ideally would be just moving/re-position the active displays to the main/1st monitor and maintain/leave those minimized display positions intact, so when 2nd monitor reconnects back (done watching TV), user doesn’t need to re-align all the displays back to 2nd monitor again. Thanks for helps.

If you won't lose anything and if it is not a big hassle, I would re-install.
Mainly because Win 10 TP is, after all, a beta OS. Too many possibilities of bugs and glitches. It is better off to reinstall.
The latest build 9879 has a ISO download link. Use the ISO and burn it to a bootable DVd. Then use the DVD to do a clean reinstall.
http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10

Photos: Shared tab shows "No Shared Photos or Videos" but they are there

After taking photos on my iPhone, I have created many shared photo streams using my iPad and I have always used the iPad to view them. But for some reason, now they don't appear on the iPad when I go into Photos app and tap on the Shared icon at the bottom. All it see is "No Shared Photos or Videos" instead of the 15 or so shared streams I have.
All my shared streams appear both on the iPhone and on my two Windows computers with iCloud.
Any thoughts about what could be going on?

If you have the space available on your hard drive and don't aready have a backup copy of the library make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

DB target status shows "Up" in Grid Control console, but actually "Down"

We've recently installed Grid Control 10.2.0.5. We recently noticed issue regarding false status indicators for several db targets monitored. From GC console, db target show status "Up" (Green Arror) when db is actually down. Should show status as being down (Red Arrow). Is this a known bug? Has anybody experienced this behavior? Can anybody please advise and/or provide solution to this issue?
Thank you in advance.
Best,
Doin

It seems that properties are missing..
Follow the steps,
Login to EM Grid-->Targets > Databases--> Select the radio buttion for PROD Database --> click configure --> Provide dbsnmp password --> click 'Test connection' --> finish
Please reward good answers by marking them correct or helpful...

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.
Once it started, it just shows it's progress and there's no option I can find to stop the download.
Any help greatly appreciated.
Regards,
Kye.

Hi,
I am not sure whether it works, Try "Restore Sound Library" in Menu.

UD Datasource Proposal Tab Shows Incorrect Column Names

I created a UD datasource in BW and the "Proposal" tab showed me the correct column names for the table I had selected. A couple of column names were then changed for this table in the source system but they are not showing up in the "Proposal" tab (the old column names are still there). I refreshed and reactivated the source system in BW but it didn't work. Any ideas on how to get the new column names to show up in the "Proposal" tab? Thanks for any help on this.

hi,
check with the following steps you carried out in the ud data source creation.
You are in the DataSource tree in the Data Warehousing Workbench.
       1.      Select the application components in which the DataSource is to be created and choose Create DataSource.
       2.      In the next screen, enter a technical name for the DataSource, select the type of the DataSource and choose Copy.
The DataSource maintenance screen appears.
       3.      Go to the General tab page.
                            a.      Enter descriptions for the DataSource (short, medium, long).
                            b.      If necessary, specify if the DataSource builds an initial non-cumulative and supplies potentially duplicate data records within a request.
       4.      Go to the Extraction tab page.
                            a.      Define the delta method for the DataSource.
                            b.      Specify whether you want the DataSource to support direct access to data.
                            c.      UD Connect does not support real-time data acquisition.
                            d.      The system displays Universal Data Connect (Binary Transfer) as the adapter for the DataSource.
Choose Properties if you want to display the general adapter properties.
                            e.      Select the UD Connect source object.
The connection to the UD Connect source is established. All source objects that are available in the selected UD Connect source can be selected using input help. Source objects can be multi-dimensional storage or relational objects.
       5.      Go to the Proposal tab page.
The system displays the elements of the source object (for JDBC for example fields, or for XMLA and ODBO characteristics and key figures) and creates a mapping proposal for DataSource fields. The mapping proposal is based on the similarity of the names of the source object element and DataSource field and the compatibility of the respective data types.
Note that source object elements can have a maximum of 90 characters. Both upper and lower case are supported.
                            a.      Check the mapping and change the proposed mapping as required. Assign the non-assigned source object elements to free DataSource fields.
You cannot map elements to fields if the types are incompatible. The system produces an error message in this case.
                            b.      Under Copy to Field List, select the fields that you want to transfer to the field list for the DataSource. All fields are selected by default.
       6.      Maintain the Fields tab page.
Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page.
                            a.      Under Transfer, specify the decision-relevant DataSource fields that should be available for extraction and transferred to BI.
                            b.      If required, change the values for the key fields of the source.
These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                            c.      If required, change the data type for a field.
                            d.      Specify whether the source provides the data in the internal or external format.
                            e.      If you choose an External Format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                              f.      If required, specify a conversion routine that converts data from an external format into an internal format.
                            g.      Select the fields for which you want to be able to set selection criteria when you schedule a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                            h.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                              i.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
Note
If you did not transfer the field list from a proposal, you can define the fields of the DataSource directly. Choose Insert Row and enter a field name. You can specify InfoObjects in order to define the DataSource fields. Under Template InfoObject, specify InfoObjects for the fields of the DataSource. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
       7.      Check, save and activate the DataSource.
       8.      Go to the Preview tab page.
If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
This function allows you to check whether the data formats and data are correct.
Result
The DataSource is created and added to the DataSource overview for the UD Connect source system in the application component in the Data Warehousing Workbench. When you activate the DataSource, the system generates a PSA table and a transfer program.
You can now create an InfoPackage. You define the selections for the data request in the InfoPackage. The data can be loaded into the entry layer of the BI system, the PSA. Alternatively you can access the data directly if the DataSource allows direct access and you have a VirtualProvider in the definition of the data flow.
http://help.sap.com/saphelp_nw70/helpdata/en/bc/ed1640b7b6dd5fe10000000a155106/frameset.htm
hope this give you an idea
regards
harikrishna N

Panel tab shows up, but panel is blank

Hello Everyone,
I've created a File Info for CS5 panel using the generic panel. As I've been working on it, it shows up just fine on my workstation. The panel's folder has been distributed to three other workstations, and on two of them only the name on the panel's tab shows up and the panel is blank. On the third one, it shows up just fine. The panel folder has been placed into "Macintosh HD:Library:Application Support:Adobe:XMP:Custom File Info Panels:3.0:panels" on every workstation. All of the workstations are Mac's. All of the Mac's have the same OS and up to date CS5 installations. I think I'm overlooking the obvious and I just don't see it.
Any help would be greatly appreciated.
Thanks!
-Dave

Hi Dave,
from what I read I guess that you have distributed the panel, but not the Flash Player trust file to the workstations.
It has to be installed (or manually created) on each workstation in the path:
/Users/<username>/Library/Preferences/Macromedia/Flash
Player/#Security/FlashPlayerTrust
You create a text file "MyTrustFile.cfg" which contains your panel path in a single line (using slashes, not colons).
You can find more details in our SDK programmers guide.
Hope this helps,
Stefan Makswit

Data in CSV uploads successfully, but it is not visible after upload.

Hi,
I am using Apex 3.2 on Oracle 11g.
This is an imported application for which I am making changes as per my requirements. As I am new to Apex and even SQL, I request forum members to help me with this.
Please find below the old code for uploading data from CSV. It displays only 6 columns - Database Name, Server Name, Application Name, Application Provider, Critical, Remarks. This was successfully uploading all the data from CSV and that data was visible after upload.
OLD CODE:_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,APPNAME,APP_PROVIDER,DBID,SERVERID,CRITICAL,LAST_UPDATE_BY,LAST_UPDATE_DATE,REMARKS) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(3),
v_data_array(4),
v_dbid,
v_serverid,
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
==============================================================================================================================
Please find below the new code (which I modified as per my requirements) for uploading data from CSV. It displays 17 columns - Hostname, IP Address, Env Type, Env Num, Env Name, Application, Application Component, Notes, Cluster , Load Balanced, Business User Access Mechanism for Application, Env Owner, Controlled Environment, SSO Enabled, ADSI / LDAP / External Directory Authentication, Disaster Recovery Solution in Place, Interfaces with other application.
This is successfully uploading all the data from CSV, But this uploaded data is not visible in its respective tab.
_*NEW CODE:*_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
--SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
--SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
--SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,HOSTNAME,IPADDRESS,ENV_TYPE,ENV_NUM,ENV_NAME,APPLICATION,APPLICATION_COMPONENT,NOTES,CLSTR,LOAD_BALANCED,BUSINESS,ENV_OWNER,CONTROLLED,SSO_ENABLED,ADSI,DISASTER,INTERFACES) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8),
v_data_array(9),
v_data_array(10),
v_data_array(11),
v_data_array(12),
v_data_array(13),
v_data_array(14),
v_data_array(15),
v_data_array(16),
v_data_array(17);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
============================================================================================================================
FYI, CREATE TABLE_ is as below:
CREATE TABLE "REPOS_APPLICATIONS"
(     "APPID" NUMBER,
     "APPNAME" VARCHAR2(50),
     "APP_PROVIDER" VARCHAR2(50),
     "DBID" NUMBER,
     "CRITICAL" VARCHAR2(3),
     "REMARKS" VARCHAR2(255),
     "LAST_UPDATE_DATE" TIMESTAMP (6) DEFAULT SYSDATE NOT NULL ENABLE,
     "LAST_UPDATE_BY" VARCHAR2(10),
     "SERVERID" NUMBER,
     "HOSTNAME" VARCHAR2(20),
     "IPADDRESS" VARCHAR2(16),
     "ENV_TYPE" VARCHAR2(20),
     "ENV_NUM" VARCHAR2(20),
     "ENV_NAME" VARCHAR2(50),
     "APPLICATION" VARCHAR2(50),
     "APPLICATION_COMPONENT" VARCHAR2(50),
     "NOTES" VARCHAR2(255),
     "CLSTR" VARCHAR2(20),
     "LOAD_BALANCED" VARCHAR2(20),
     "BUSINESS" VARCHAR2(255),
     "ENV_OWNER" VARCHAR2(20),
     "CONTROLLED" VARCHAR2(20),
     "SSO_ENABLED" VARCHAR2(20),
     "ADSI" VARCHAR2(20),
     "DISASTER" VARCHAR2(50),
     "INTERFACES" VARCHAR2(50),
     CONSTRAINT "REPOS_APPLICATIONS_PK" PRIMARY KEY ("APPID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R01" FOREIGN KEY ("DBID")
     REFERENCES "REPOS_DATABASES" ("DBID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R02" FOREIGN KEY ("SERVERID")
     REFERENCES "REPOS_SERVERS" ("SERVERID") ENABLE
==============================================================================================================================
It would be of great help if someone can help me to resolve this issue with uploading data from CSV.
Thanks & Regards
Sharath

Hi,
You can see the installed dictionaries and change between them by right-clicking and choosing '''Languages''' inside a live text box eg. the box you are in when replying or right-clicking on the '''Search''' box on the top right corner of this page and choosing '''Check Spelling'''.

Data appears in the tree but not in the display

Post Author: TheBig1980s
CA Forum: General
Hello:
When I print data for one month, data appears in both the Preview tree and the Preview display. When I print the data for another month, the data does show in the Preview tree but not in the Preview display.
Forgetting the tables the report is pulling from, forgetting which month is which, etc., why (in any case) would Crystal show data in the Preview tree but not show that same data in the Preview display? That makes no sense. I wish I could just take my mouse and just drag the tree onto the displayu2026..
I have nothing suppressed. This is Crystal 9.
Thanks!
TheBig1980s

Post Author: SKodidine
CA Forum: General
I encounter this in CR XI once in a while. What I found from my research, if I have a group and then I have certain conditions to either display or eliminate the data selected for whatever reason then the group tree will show the group and since the data is eliminated by either the select criteria or another way there is no data displayed.
Try this. In the second month where you see the data in the tree but on the report, see if you can narrow it down further by day and see if you can find the reason why.

When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

IPhone4 resets alternately, date resets to january 1970, won't reboot without wall charger

Hi,
my iphone4 keeps turning itself off alternately,
it wont reboot unless i hold down the lock button and centre button at the same time,
or if i plug it in the wall charger then it reboots, showing an apple symbol,
however it resets the date to january 1st 1970
and call i recieve\dail do not appear in call logs
currently the iphone is running ios 4.3.3
help!
Regards,
Mosh

Try updating to ios5
Is it jailbroking

I just got a new phone today the iphone 5c and i plugged it into itunes. i wanted to get all of my data from my iphone 4s but when i synced my phone all of my iphone 3 data was on my new phone how do i get my iphone 4 data on my new phone?

I just got a new phone today the iphone 5c and i plugged it into itunes. i wanted to get all of my data from my iphone 4s but when i synced my phone all of my iphone 3 data was on my new phone how do i get my iphone 4 data on my new phone?

Did you choose the wrong back up? There should be a drop box when you go to "Restore from Back up" in iTunes and your iPhone is plugged in, on the Summary page. Choose the correct back up. If you can't find one, and you still have your device, back up your iPhone 4 again and then choose that back up. Or check for an old iCloud back up if you have one.

Visual Studio Tabs - Show Title instead of Work Item Number?

When opening individual work items in Visual Studio, the tab in the document well just says "Task 100485" or "Bug 38374". Is there a way to instead have it show the Title of the work item? Just showing the number isn't really
helpful when quite a few are kept open.

Hi Brian,
Thanks for your post.
We show view the work item Title in each opened work item form in VS. As the work item’s tab has fixed width in VS, so if show the work item Title in each work item’s tab in VS, it will costs the wide width, if work item’s title is long, maybe two or three
work item tabs can show in VS at the same time.
As far as I know there’s no default way to change work item’s tab show work item Title in VS. For this scenario, please
submit it to User Voice site at: http://visualstudio.uservoice.com/forums/121579-visual-studio. Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BO4 - Data tab shows date as 01/01/1970 but actually now on database

Similar Messages

Maybe you are looking for