BO4 - No CMS is configured as an auditor

Getting caution alerst in BO4 Central Management server and these mentioning number of audit events in queue.
when look in Auditing tab in CMC get
BO4 - No CMS is configured as an auditor message.
tnsmaes fine and can communicate via sqlplus to the audit datasource fine.
What is causing this.
How can we resolve.
Notice in central management server command line mentions - noaduditor but cannot change this.
No connection to Auditing Data Store from CMS SIA_NEW.CentralManagementServer
Any ideas?
Thanks
Edited by: Philip O'Rourke on Jan 31, 2012 5:35 PM

Thanks for suggestion but not the case here.
can communicate fine from server to audit database schema via sqlplus.
Notice the central management server has a -noauditor switch and auditing page says client auditing not available.
Cannot change the central management server command line switch to remove the -noauditor part
Any idea how to do this - ano other idea?

Similar Messages

CMS Track configuration does not save after removal of runtime

Hello,
We are having problem to save CMS track configuration after removing a runtime which was taken away from us and is not recoverable. The CMS track config was not updated prior to this and we can no longer make track adjustments due to the old DEV runtime sys not being available. Does anyone have similar issue and know how to fix it?
Thanks!

For this SP5 track, we have not imported SP9 required SCs (SAPJEE, SAPJTECHS, SAPBUILDT, EP_BUILDT). but we did imported them (SP8 version) with patches. We imported most current SP9 patches to the new SP6 track. We want to move our development on the SP5 track to assemble it, then imported to the new SP6 track based SAP XSS cookbook.
We are not able to assemble released activities with broken DCs on the SP5 track. I look a DC for ess/au/fam/cfg, Build.log still shows xlf conversion error:
Ant runtime 4.295 seconds
Ant build finished with ERRORS
The following error occurred while executing this line:
/usr/sap/DID/CBS/61/.B/90062/DCs/sap.com/ess/au/fam/cfg/_comp/gen/default/logs/build.xml:80: Error converting file Texts_tr.xlf
Error: Build stopped due to an error: The following error occurred while executing this line:
/usr/sap/DID/CBS/61/.B/90062/DCs/sap.com/ess/au/fam/cfg/_comp/gen/default/logs/build.xml:80: Error converting file Texts_tr.xlf
Build plugin finished at 2006-12-13 19:30:41 GMT-05:00 (EST)
Total build plugin runtime: 6.794 seconds
Build finished with ERROR
Not sure if you can force it assembled even with this broken DCs as we have not touched this xlf.
Please let me know if you find something similar to us from other customers.
Thans!

CMS not configured yet.

Hi,
for first time we have installed NWDI(not much idea about NWDI configuration).when i open nwdi page (http://host:port/devinf) we are getting message "CMS not configured yet."in bottom.do we need to configure cms?and how to configure?

Hi John and Ervin,
while running di all in one wizard
i got errors like
1)Error: XPath evaluation error Step: Retrieve information for user configuration
2)Error: PASSWORD_TOO_SHORT
Step: Create Default Administration User
3)Error: PASSWORD_TOO_SHORT
Step: Create Default Development User
4)Error: USER_AUTH_FAILED: User account for logonid "NWDI_DEV" not found!
Step: Assign Development User to Group NWDI.Developers
5)Error: Unauthorized
Step: Upload Default ACL Settings
*6)Error: HTTP response "Unauthorized" from CMS server "http://host:50000/"***
**Step: Retrieve configuration information from CMS**
before running this wizard,do we need to do something,pls tell wat is exact procedure.
Regards

BO4 - Corrupt CMS database - central managemnet server part

Hi,
We had following situation.
CMS.exe would stop after 30 seconds so have created a new SIA node with default servers on same BO server to point to new blank schema on existing CMS database. This has created the various tables in a CMS and has a CMS server running on port 7400.
This proves communication between machines, database and software fine form central managemnet server perspective.
CMS.exe now up and running on this but the connection servers continually saying Initialzing.
Any idea why?
Ideally would like to use backup CMS database but problem is that when we change the data source on new SIA node to point to this backup cms.exe won't run for more than 30 seconds.
Any ideas/thoughts/resaons much appreciated.
Many Thanks

Found reason
Number of auditing evenets in queue > 500.
What causes this?
How can we change this - haev auditingh switched on - why so many events in queue.

NWDI Configuration: CMS

hi,
We are trying to configure NWDI and in this process, we had completed all the steps for NWDI installation and configuration and also the CMS configuration, Product & SC Definition in SLD now during the creation of Tracks using CMS, we are not able to see the Software component created in the SLD.
Any idea how to solve this.
Thanks and regards,
Kris

Kris,
Couple of things, which might help:
1. Go to CMS/Landscape Configurator/Domain Data
Make sure SLD URL field has correct data and press "Update CMS" button.
CMS will sync component data from SLD. If it fails, check log files for explanation. If success, you will see new components from SLD.
2. NWDI questions are better answered if posted to NWDI forum
SAP NetWeaver Development Infrastructure (NWDI)
There are good NWDI experts monitoring the forum.
Regards,
Slava

Configuring NWDI and CMS

Hi,
We did a Development portal installation (DEV) with NMDI and finished the DI post installation in the DEV system and configured my SLD in solution manager. Now we are going to install Portal Quality system (QAD) with NWDI. I need some documents after installing QAD system, like DI post installation and CMS configuration from quality to development system. I mean to say that, DEV as a Domain controller and QAD to include in that CMS. Before doing the DI post installation in QAD, do I need to change the Domain data of change management in Quality like CMS name, CMS url, CMS user, password, trans dir, Domain ID(if so,Can we change this ID to DEV), DTR url, CBS url. If so, do I need to give the datau2019s of Development system? or how to configure my quality system CMS to development system CMS. I found some links but there is no link that says about the configuration in development.
Thanks
Regards,
Ral

Hi Narendra.
Thanks for reply.
While defining Software Component, I created a Build Time Dependency on these components and chosen SAP-JEE, SAP_BUILDT and SAP_JTECHS components.
While defining a Track under Domain in CMS (Landscape Configuration) i am not getting these dependent components under my SC.
So after adding SC to my track, i again Defined Dependencies on my SC. Now i can see these components under my SC but gives warning that "SC Dependencies are different but accepted by synchronization" and status of SC is yellow.
Please suggest.
Mandeep Virk

CMS Tracks - best practice?

Hi,
we are developing our product with CVS right now and want to move over to DTR. The basic concepts are clear and I did a test migration yet which is successful.
But I am unclear on the chamge management piece:
Let's say we develop a version 1.0
Now this version has service packs 1.0 SP1, SP2, SP3 and so on. These service packs also have to be maintained, they might contain bugs, so you could have something like
1.0 SP1 Patch 1, 1.0 SP1 Patch 2 and so on.
How do I handle this with CMS tracks? Whats the best practice? Do I setup a track for every major version and for every support package in that version? I.E. i will have a track 10SP0, 10SP1, 10SP2, 10SP3 and so on? Will this work?
Right now we have a lot of CVS tags and branches to make this work... but how do you do that in DTR? I need to be able to jump back to a specific version and SP and fix bugs in there if a customer needs it.
In CVS the concept is that I will develop in HEAD and bugfix in branches (which is all in the same repository / "workspace"). But in DTR how do I do it? Is there something analog to this? Or do I always just use the track with the highest versio number as the "HEAD"?
Any input is appreciated.
Thanks
Bruno

Hello Bruno,
For each state of your product that you wish to maintain, you must create a track. So in your case, you will have a track structure as follows:
Track1.0
Track1.0_SP1
Track1.0_SP2
DTR does not support tags (yet), so the state that you wish to retain for possible future fixes must be isolated in a workspace of a given track. That is, "Track1.0_SP1" will contain the workspaces that represent the SP1 state, and a fix for SP1 must be done in this track.
And you must develop on the Main Release track ("Track1.0") and do the bugfixes in the track for the approrpriate SP. You should set up a transport connection of type "Repair" from each SP track to the Main Release track, so the fixes you make in the SP track are automatically back-transported to the Main Release track. (This connection can be setup in the "Track Connections" tab in the CMS Landscape Configurator.)
Also note that the DTR version graph represents a global version history, so for any file you will be able to view the changes made in the different tracks (workspaces) from the Version Graph view (in the DTR Perspective of the SAP NetWeaver Developer Studio).
Regards,
Manohar

CMS Config on DEV XI

We have landscape of four XI with SLD for each instance. And we are in the process of Migrating Sand, Dev and Q into one SLD. On Dev XI, we have portal instance running and CMS already configured to work for Portal Transports. For XI, we are yet to config.
My Question is: Can we config the CMS on same DEV XI to work through the transport, is there any conflicts between Portal CMS and XI CMS with respect to the transports.
We are trying to meet the timelines and budget, so we may not expect the Hardware for Seperate CMS Installation to take a place and trying to see if there are any work arounds.
Any help is appreciated

Hi Hari,
Please check these..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/163a7cbf-0501-0010-8eb1-b25ad84a56ed
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
Hope these help!
cheers,
Prashanth
P.S Please mark helpful answers

Development Configuration import failed: class java.io.UTFDataFormatExc

Hello,
after importing the SAP ESS/MSS source I tried to import the development configuration as described in "JDI Cookbook for ESS Customers - Modification guide for ESS".
But when I confirm the selection: ESSTrack -> 1.0 -> ESSTrack_dev with the 'Next' button I get the error message:
Exception: class java.io.UTFDataFormatException Invalid byte 1 of 1-byte UTF8-sequence (0xfd).
NWDS: NW04, SP12, XP (german), j2re1.4.2_08
NWDI: NW04, SP12, Solaris 8, j2re1.4.2_07-b05
CMS and DTR seem to work properly.
Best regards
Thomas

Hi Helmut,
You are absolutely right!
There was an Umlaut in the track description (CMS Landscape Configuration). I replaced it and afterwards I was able to import the ESS development configuration.
Thanks a lot.
Best regards
Thomas

Development Configuration import failed

Hi,
In NWDS , when I try to import an existing development configuration, I get the following error message :
Exception: class java.ioUTFDataFormatException
invalid byte 1 of 1-byte UTF-8 sequence (0xfd)
Do you guys have an idea about this issue ?
Thank you in advance,
Best regards,
Arnaud
Edited by: Arnaud on Mar 25, 2008 2:59 PM
Edited by: Arnaud on Mar 25, 2008 5:38 PM

Hi Helmut,
You are absolutely right!
There was an Umlaut in the track description (CMS Landscape Configuration). I replaced it and afterwards I was able to import the ESS development configuration.
Thanks a lot.
Best regards
Thomas

SWCV not found in CMS Track

Hi All,
I am trying to create a Track for Software Component Version in CMS but while opening the search help of Add Software Comonent Version my SWCV is not appearing in list.
Here I am using my own SWCV for the scenario.
Please suggest.
Thanks & Regards,
RP

The issue resolved.
Need to synchronise CMS with SLD.
Following path can be used to sync CMS with SLD.
CMS -> Landscape Configurator -> Domain Data -> Update CMS.
Thanks to all.
RP

Customer SC missing in the CMS...

We created a Product and a SC into the SLD, and we are trying to use it to define a CMS track .
Despite the customer SC is available if we logon on the SLD server and search it, we are unable to find it when we are logged on to the CMS server.
So we cannot choose it for the CMS track definition.
Any advise ?

1. Go to CMS/Landscape Configurator/Domain Data
Make sure SLD URL field has correct data and press "Update CMS" button.
CMS will sync component data from SLD.
Regards,
Slava

DTR Nameserver Configuration (URL, user, password) could be inconsistent

Hello,
When I save my data into the Domain Data in the CMS --- Landscape Configuration, I receive this message as a Warning :
<i>DTR Nameserver Configuration (URL, user, password) could be inconsistent. Save this track to resolve the inconsistency</i>
I went to the DTR Name Server Configuration and I set the information that the message told me it was not consistent, I saved it and tried again, but nothing diffent happened.
Any suggestion ?
Kind Regards

Hello,
Just check if http://<Servername>:<port>/dtr is accessable.
If not, you will need to redeploy DTR package again.
Ashu

Cannot log onto MySQL CMS Database after network installation

Post Author: matthewh
CA Forum: Authentication
I've just installed Crystal Server XI R2 on a brand new server running MySQL 5.0.45 but when the installation completes it says it can't log on to the CMS database. It's created the empty database and I have the db.opt file in there but nothing else - no tables or anything. I've re-run the installation and done a repair and Modify but with no change. The CMS user has full rights to the MySQL instance for now, so it shouldn't have been an issue. Is there a SQL script available I can run to build the initial db manually? Do I need to uninstall and go through it all again? took over 2 hours across the network and the server is in another part of the country.

Post Author: TAZ
CA Forum: Authentication
Hi Matthew,
I'm not sure why you cannot access your mysql DB but you do not have to reinstall.
Launch the CCM(central configuration manager) If the CMS is not stopped then stop it.
double-click on the CMS choose configuration, choose specify, choose recreate the current data source.
This will reinitialize the CMS DB if the account configured has the proper permissions. It should be a DB owner
Regards,
Tim

CMS is not started

Hi, I installed trial version of Business Objects Edge series. DUring installation system asked me to logon into CMS to configure but I don't know what password I was suppose to give and thus after multiple tries I decided not to logon. Now I see that CMS server is stopped and I am not able to start and I dont know what to do. I can not at all login into anything.
Thanks,

Hi, The version is 11.5.8.826.
The serve log is given below. I repeat that during the end of installation it asked me to enter the password for CMS. I did not know what the password would be so I had to cancel that and thus CMS did not get configured. Please let me know how I can do it now or I have to reinstall. Please also let me know what would be the first time password.
================================
Timestamp ProcessID ThreadID Message
[Fri Aug 01 03:05:29 2008] 1924 660 assert failure: (.\ObjectSubsystem.cpp:1663). (thisList->RemoveKey( pf ) : no message).
========================
Edited by: Kalpesh Pandey on Aug 1, 2008 3:46 PM

BO4 - No CMS is configured as an auditor

Similar Messages

Maybe you are looking for