Board Error Codes

Is there a location where MSI lists their error codes for mobos, My new build works normally but flashes 9C, 84, 99 and A2 before booting.

There is no "error", it's the steps the boot process goes through. These are only relevant if booting won't continue at a point. The codes are universal for American Megatrends (AMI) BIOS and UEFI solutions and not an MSI special.
9C - USB Detect
84 - OEM DXE initialization codes
99 - Super IO Initialization
A2 - IDE Detect

Similar Messages

Logic board: error code 2ROM/1/2:0X12 i try to reinstall tiger for our G5

Need help:
logic board error: error code 2Rom/1/2:0x12 while doing the hardware test for G5 before reinstalling Tiger.
please need help
thanks.

Craig-
AHT isn't always dead on this is true.
Just out of curiosity, what are your symptoms? I am guessing that the start-up drive doesn't work if you put it into the 2nd bay?
Luck-
-DaddyPaycheck

Z77a-gd65 gaming board error code

Hi i have a gd65 gaming board and i have the debug code of 35 come up all the time code 35= Early cpu initialization, i have swaped cpu's and ram still tell's me same code.
I have checked for bent pin's can't see any have flash to up to date bios still same code, i try to go to MSI Online Product Registration Center and all i get when i try to make a account is php error's.
Any one help me at all.
My pc spec's are
i7 3770k
z77a-gd65 gaming
msi gtx760 gaming
8 gb corsair pro ram
corsair hx 650 psu
intel 560 ssd

i have just removed the cpu and checked the pins cant see any bent at all blow some air to clean any crap out.
I have emailed MSI to see if i can get a rma i hope they can fix it cause i had a z68 -gd55 board last loved it so i love this board more .

Logic board error code?

while running the extended tests on the Hardware Test cd, the logic board test coughed up this error:
scc /1/5
anyone know what it means?
thanks,
G4 Gigabit Ethernet 1.2GHz (Sonnet Encore/ST), 768 MB/120 GB Mac OS X (10.4.3)

As I recollect SCC refers to Serial Communications Controller. Probably something slightly flaky with the USB Phy.

A55M-P33 FM1 Board Error codes?

I just bought an A55M-P33 Board with an AMD A4-Series A4-3400 APU. Got it all put together and when i turn it on all the fans and everything turns on for a second then powers down and leaves my power/reset switch blinking. Any help or thoughts would be appreciated.

See . . . Now that is a Nice FRIENDLY answer. I realize im new here but i think a little leeway is due.
Quote from: flobelix on 10-March-13, 21:42:19
Follow >>Posting Guide<<
^That just seemed a little abrupt n rude.
And Thank You Svet for letting me know what i needed but i already got an RMA so I will leave you in peace now.

G61 428 1.5 years old out of the blue freezes and shuts down. Now on start-up I get error code 00A.

Now on startup I get the 00A error code, this is mother board error code. ESC on startup does not give me a menu.
I also have messages that Product name , configuration, serial number and product number is missing. The note book however continues to work so far, except windows says it is not genuine anymore.

Rapport has to go. It's not compatible with Safari.
Uninstalling Rapport on Mac OS X | Trusteer
One of Trusteer's rep's posted on this thread > Trusteer's Rapport Software: Apple Support Communities
I hope you can get it straightened out soon!

Error code post/16/64?

I've been having recurring problems with my G4.
Symptoms:
2nd internal hard drive warning such as prompting an error message of 'you must initialize, ignore, eject' then I re-boot, other times a prohibit sign, spinning rainbows, kernel panics. It's a mess.
This only happens on start up after shutting down for the night. But I think I've made things worse
I ran suggested back-ups, PRAM resets, ran cocktail, tried disk utility from start up, ran disk warrior from start up, it found some file errors, cleaned them up. Cloned my system using Superduper, backed the hd up on a NewerTech.
Next day, start up issues again.
I ran memtest, and that found nothing. Start up from install disc, ran disk utility, everything's passing, SMART status is verified.
But it is still not operating correctly. I still have start up issues.
This has been going on for at least a week.
I ran AHT twice. The first time all tests passed. I didn't believe it.
So I ran it again and I received the following:
error detection at the logic board:
error code: scc_/1/5 (I think this is a non-apple board warning)
error code: post/16/64.
What?
My internal HD (original) is running at 85% (60g)
My second internal is 120g partitioned with mostly back-ups (not the only back up) and documents.
Thank you to all the folks who've generously posted in the past and thank you in advance for the one that catches this.
-M
G4, gigadesign 1.2, 1.25 ram, radeon 9800 pro Mac OS X (10.3.9) originally QS 933

The POST/16/64 points to an error on your processor board, bad cache memory. I had this same error, still have the processor on a shelf actually, and it took me months to find the code translation.
Apple says for a POST/16/xx error
1. replace processor board
2. replace main logic board
I don't know if there is a heat issue that causes this, but, several cases that I have heard of had systems that ran very hot.
A fellow in Singapore mentioned that he had the same error and believes that the heat causes the external cache chips on the 7455 processor board to loosen(I think your Gigadesigns is a 7447 based chip). He stated that he heated his chips and resolved the error:
"The cache are DDR type samsung BGA chips. This is most difficult as both sits directly opp each other. The only way I think is to heat the chip on 1 side below 220degC(removal at 350degC and soldering in at 300degC). Best if you can get a heater blower and blow at the small gap bet chip and processor board, very tiny clearance, less than 1mm. You can give it a try for the time being, on the chip itself though not the most ideal."
If there are other numbers at the end, ie POST/16/xx yyyy then it is likely a RAM problem or RAM slot problem
1. reseat DIMMs
2. replace DIMMS
3. replace main logic board
Hope this helps, I ended up replacing my processor and as I stated before still have the originalon a shelf. I may try the heat trick one day though.
QS 2002 Dual 1GHz, FW800 Dual 1.25GHz, iBook 1.33GHz, G5 2003 Dual 2GHz Mac OS X (10.4.8)

PowerMac G5 Error Codes?

Thanks In advance to everyone. I have a Late 2005 G5 Dual 1.8Ghz 6gigs of Ram, Lacie firewire 400 Pci card, internal 4 port sata Card, ATI XT800 MAc video card running tiger(10.4.11). I noticed the Machine acting very sluggish the other day, My first thought was the Memory maybe there are some bad DIMMS, After a restarted things where ok again. Right Away ran memtest, came up with no issues(I know it did'nt test all the memory) But I thought this was a good start. But so far been ok. I then ran hardware test twice at 5Min and 30 sec error Code on Logic Board (Error code 2PFW/3.10: FW) This Looks Like a FireWire Error I think but Im thinking this a memory problem, Some bad Dimms. Does anyone know what this error code is? Thanks for Looking

That is inded a Logic Board Error to do with Firewire, do all your ports work?
Have you tried it without FW devices hooked up?
Tried Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3...
http://support.apple.com/kb/HT1939

Board giving error codes for RAM

I have a Z87-GD65 GAMING board. I am having an issue with running the RAM in DUAL channel. It will running OK with each stick individually installed, but not together. Error codes I'm getting are a 10, followed by 19, and then 55. With just one stick, code is A0. My RAM is Corsair Vengeance Pro Series Red 8GB (2x4GB) DDR3 1600 MHZ (PC3 12800) Desktop Memory CMY8GX3M2A1600C9R.
This is on the very first boot after everything was installed. no BIOS changes were made.
Any help would be appreciated.

Quote
I didn't have a chance to look at socket. But, I did notice that the 1st two dimm slots don't work, but 3 and 4 do.
Classic bent CPU socket pin(s) scenario.
Quote
I hear that the LGA 1150 socket pins aren't really easy to bend. I placed the CPU in and clammed down. There wasn't really anything I could have done to mess it up. I'm pretty positive of that.
Unfortunately, not true at all. They are very fragile. A CPU cooler mounted uneven or that has incorrect torque will also cause this behavior.

Logic board has an error code running A.H.T.

I ran AHT 2.0.1 on my MDD Dual 1.25 OS10.4.11
It said the logic board had an error code.
2PFW/2/3:Firewire
The test stopped.
I this serious?
What should I do?
Shamus

Firewire external DVD & HD work fine for me in 10.4.11. Never tried target disk mode.
Anyway, if AHT found an error with your firewire port, I'd say you have a hardware problem with the firewire port not a software problem.   If you have lived with it this long, you can live with it a while longer.
I guess the question it how do you skip the firewire hardware test???   I do not know. Anyone know?
Robert

Digital I/O board 9478 error code 65548 overcurrent report by channel

Hi All,
We are investigating overcurrent on digital outputs. This project is using the Scan Engine instead of FPGA.
Reading one of the hardware shared variables gives the error code 65548 - One or more channels are in overcurrent or overvoltage protection mode.
If we used FPGA would we be able to determine which channel is in overcurrent?
Thanks,
Paul

Hello Paul,
Yes, it can. You can use Module I/O Method and it will indicate if the module runs into overcurrent or not. The previous like is for the 9269, but it also works for the 9478. Remember that if you are using LabVIEW 2012, you won’t be able to create a method by right clicking on the I/O variable because of a known bug. A workaround for this is to open the example “NI 9269 Status Methods.lvproj” and add your target. Then you can right click on the method » Select Item » select your module.
Regards,
Daniel REDS
RF Systems Engineer
Help us grow.
If a post solves your question, mark it as The Solution.
If a post helps, give Kudos to it.

DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name:      Application
Source:        MSExchangeRepl
Date:          28.09.2012 00:37:17
Event ID:      2112
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name:      Application
Source:        MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID:      2024
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:
N/A
Computer:      Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
-          * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
Markus

Hi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can't be completed because one or more required items can't be found. (Error code -43). What do I do?

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can’t be completed because one or more required items can’t be found. (Error code -43). What do I do?

Post in Microsoft's Powerpoint (Mac) message boards.

AHT finds logic board error, but computer working fine

I ran the Apple Hardware Test to see the profile for my RAM, but 7 seconds into the test it stopped and reported a logic board error.
1. But my computer is working fine. If anyone has experience with this, I'll gladly take your advice. Do I ignore this error at my own risk? Or should I get it looked at now in case it's an early warning of something that can get worse? For the real Apple tech experts, here's the error code: 2I2C/1/1: 0x00000092.
Eleven months ago, I had to get a new power supply installed. It was covered under the extended warranty for power issues with iMac G5s. As I've indicated, it's been working fine since then.
2. Once AHT finds an error, it won't continue testing the remaining components. Does anyone know of a way to "force" the AHT to skip the logic board test and go on to test the other hardware items?
Thanks all.

Michael, pray tell, where does one find the published list of codes you refer to? I searched the whole internet (or so it seemed like it) looking for a resource like that. Are you an AASP?
Even my experienced Apple technician and his AASP contacts didn't realize that my error code relates to the European Union. (And, BTW, I'm in Canada and I purchased my iMac from a store in Canada.) You have solved a mystery!
The strange thing is that when I phoned Apple Tech Support and asked to speak to a product specialist, even they told me that the code means "logic board needs replacement." When I asked to speak to a higher dept., I was connected to Customer Relations (very nice, professional fellow answered). When I explained that this G5 iMac has been problematic for me (failure after 7 mos. of ownership, power supply failure after 3 yrs, etc.) he offered me $100.00 off a new iMac ($125.00 in Canada), which I accepted.
I did use TechTool Pro to check the computer. It found no problems. Four months later and it's still going strong. I don't know whether to be upset with Apple for not bothering to look up the code, or whether I should look at this as a blessing in disguise (how else would I have received $125.00 off a new iMac? And now, my father gets a G5 that I can confidently say is in good working order). And it's strange that my local tech's AASP friends weren't any wiser. Aren't AASPs privy to this error code info? A mystery indeed...

Board Error Codes

Similar Messages

Maybe you are looking for