BOBJ Integration Kit with Plone?

We have a setup where our Enterprise Portal is Plone. Is there a BOBJ Integration Kit with Plone, or one for opensource in general, or should we use the SAP PIK and link the SAP Portal to Plone for this purpose?

Hi,
i`m not aware of any PIK for Plone. The easiest way would be to place a HTTP Link in your Portal to BI LaunchPad or SAP EP.
You could create an OSS Message with the SAP Support to check if there is a PIK....but i dont think so.
Regards
-Seb.

Similar Messages

BO Integration kit with SAP Nothing happens after I click authentication

I have installed BO integration kit for 3.0 and i can see SAP in authentication however when i click nothing happens. I have checked if designer can connect into SAP if i give the authentication details manually and it does return data from SAP BI.
Am i missing something here.
Regards
Kalyan

looks like a duplicate to this one
Re: BO Integration kit with SAP Nothing happens after I click authentication
Ingo

SBOP XI 3.1 Edge Integration kit with SAP

Hi All,
Can any one tell me where can i find the integration guide for integrating SBOP XI 3.1 Edge with BW ?
This is SBOP Edge and not Enterprise. I did search under http://help.sap.com/businessobjects/ but didnt not find it.
Where can i find the Integration kit for integrating SBPO XI 3.1 Edge with BW system.
Also please suggest the post steps after integration.
Regards,
Ritesh
Edited by: Ritesh Patel on Dec 23, 2010 5:42 AM

Hi,
all the software is available on http://service.sap.com/swdc in the BusinessObjects area.
Ingo

Weblogic integration kit with VAJ 4.0

Will support be added for the Weblogic integration kit for IBM VAJ 4.0 now
that 4.0 professional is available?
Alex Garrison

Hi,
In VAJ3.5.3 Weblogic Bridge documentation ...
The docs/userguide.pdf says that (In service-PAck for Integration-Kit)
Import VAJ35weblogic510spX.zip where 'X' is the service-pack number
BUT...I don't find VAJ35weblogic510sp10.zip Anywhere on BEA site.
Please let me know where to get it from if it is ever available.
How do you upgrade the bridge to SP10?
Thanks,
Harish.
Jim Edwards-Hewitt <[email protected]> wrote:
>
Hi, Alex,
While I'm not in a position to commit to anything official (I'm in
engineering, not PM), I think I can safely say that if the name "IBM"
isn't a problem for us, the name "WebSphere" won't be either. (And the
way IBM is going with slapping "WebSphere" on everything they can so
they can claim more WebSphere sales, they're practially synonmymous.
I'm not working on our VisualAge stuff now, but I did in the past. We
put a tremendous amount of effort into integrating with VisualAge for
comparatively little return, because the VAJ API is so limited, but it
was worth it to do the best we can to allow you to use VAJ to develop
for WebLogic, and not abandon VisualAge users to WebSphere. If IBM
moves to a tool that makes it easier for us to do that and lets us
provide a better user experience, then I believe we'll take advantage
of
it. (And of course, IBM is using tools to try to steer developers to
WebSphere, so if we can make them work well for WebLogic, too, that
helps us as well as benefiting developers.)
-- Jim
Alex Garrison wrote:
Michael,
I will certainly do so, and I will ask the other developers here todo so as
well. However, since IBM is phasing out VAJ in favor of a WSW-basedIDE,
and since WSW is open source/open API, perhaps this will be a mootpoint a
year from now. BTW: I know that IBM says it will continue to supportVAJ
for at least the next two years, but I dont have to be beat over thehead to
see that VAJ is dying and IBM is moving to the WSW-based IDE.
A big concern in the VAJ community is whether partners like BEA willwant to
remain partners with a product that has the name "websphere" in it(WSW =
Websphere Studio Workbench). I would move to a more platform-neutralIDE
like JBuilder in a heartbeat if it wasnt for the $3000 (oh excuse me,$2999)
per seat enterprise license.
Alex Garrison
"Michael Girdley" <----> wrote in message
news:[email protected]...
It is being worked on. No ETA yet.
I would encourage you to vote on IBM's Web sites open the VisualAge
APIs
to
partners like BEA.
http://commerce.bea.com/downloads/weblogic_server_tools.jsp
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
Buy the only book covering J2EE & WebLogic 6:
http://www.amazon.com/exec/obidos/ASIN/0130911119/learnweblogic/103-9227026-
4636613
"Alex Garrison" <[email protected]> wrote in message
news:[email protected]...
Will support be added for the Weblogic integration kit for IBM
VAJ 4.0
now
that 4.0 professional is available?
Alex Garrison

Dashboards using APEX4.0 OR Anychart Integration Kit with manual XML Gen

Does APEX 4.0 include 'dashboard' type of charts ? If yes, we would like to hold off on our dashboard charts till 4.0 release...
Can development throw some light on this ?
Thanks
A

can anyone help answer this ?
thanks a lot

SAP Integration Kit installation - BW Publisher parameters

Hi,
We are working on an BO GRC RM 3.0 scenario (Windows/SQL Server). As per architecture requirements we are currently installing BOBJ Integration Kit for SAP. However the following doubt comes up. As per architecture requirement also, and as it was defined for our scenario there is no need for an BI system (AS JAVA was installed only as EP usage type) if the reporting is going to be used with BOE Crystal. What we need there, is to install and BOBJ SAP Integration kit on BOE XI 3.1 server and to import Crystal transport files in AS ABAP (SAP_ABA, SAP_BASIS, PI_BASIS, SAP_BW).
During the Integration Kit installation process we are being prompted for BW Publisher parameters where an RFc to a BW system is required. As mentioned earlier, we donu2019t have an BW system since BOE Crystal will be used instead of WebDynpro ABAP ListViewer...Are we using the incorrect Integration Kit? Should I install BI_Content Add-on installed on AS ABAP even when reporting is going to be used with Crystal Report?
Hoping being clear enough, please let me know if I can proceed with Integration kit installation in this way or should I have some other precautions for this particular solution implementation.
Thanks and best regards.

Hi,
in case you do not have SAP BW as part of the landscape then there is no need to install the publishing component
Ingo

Explore SAP CL cluster table folder using Crystal Integration Kit

Dear All,
I am a SAP FICO consultant and have just installed the SAP integration kit and CRYSTAL 2008 with a Business Object consultant. We planned to access the SAP cluster tables and replace some ABAP reports with CRYSTAL and Business Objects Reports.
We have encountered the below two key problems, which I am hoping you can help with:
- I am only able to view the three folders stated (CL, DD & FN) after giving the CRYSTAL User ID full SAP_ALL access and not with the limited access in the installation guide, profile CRYSTAL_ENTITLEMENT.
- I can not see any cluster tables within the CL (Cluster) folder as expected and only see data in the FN (Function) & DD (Data dictionary), even after giving the CRYSTAL ID the SAP_ALL access.
Please can you assist from your experience of implementing the Integration kit with SAP ERP?
Products used: SAP ECC6, CRYSTAL 2008 SP2 and current Integration Kit.
Kind Regards,
Mo.
Edited by: Mo Habib on Nov 6, 2009 2:26 PM

Thanks for you replies and I also had a look at Ingo's blog "BusinessObjects and SAP Part 4". The blog indicates that the CL folder is not for the standard cluster tables but specifically for ABAP clusters. Hence why I can not see any tables within this folder as they have to be mapped and setup in SAP if required.
My installation must therefore be correct and I should just use the DD folder for accessing SAP cluster tables? Many thanks for your help and if you can confirm my above assumption then I will mark question as answered.
Cheers,
Mo.

Visual Age 3.5 + windows 2000 + integration KIT 5.1 beta

I can manage running Weblogic server in VA 35 integration kit with windows 2000.
(it's work with NT4).
I get the error immediately error : java.lang.unsatisfiedLinkError no server validator in java.library.path

this is because of 2 missing dll files ! they do not get installed on win2k .u can get these files from a
winNT installation of IVJ
ivj_home>license contains the dll files .copy them and create a license directory in ur ivj installation !this
should get things moving !
cheers
Amjad
Le bail wrote:
I can manage running Weblogic server in VA 35 integration kit with windows 2000.
(it's work with NT4).
I get the error immediately error : java.lang.unsatisfiedLinkError no server validator in java.library.path--
Pixelpark AG. . . . . . . . .
Amjad Liaquat
IT Developer
Ruhrallee 9
44139 DO
#49 231 5521452 fax-1490
mobile-49 177 2683743

Integration Kits

Thank you in advance for your help!
My company is using Crystal Server XI w/ 5 concurrent CAL. If we use some type of integration KIT with Crystal Server to access the reports, would this mean that the we do not need to buy any more CALs?
Would it make a difference if we use a portal access to Crystal Server in reference to the licenses?

Please define "some type of integration KIT".
Would it make a difference if we use a portal access to Crystal Server in reference to the licenses?
This should not be of any consequence. You have 5 CAL and that is the same no matter how CE Server is used...
Ludek

SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end

Hello Team,
We are in a little fix.
We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
Is such a thing available, If yes can someone send a link to that.
Regards
Lalan Kanade

Hi,
Thanks for the quick reply
I could trace this document. "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
I checked in "Supported Data Sources for Crystal Rep" section, extract below
SAP BW Server 3.0b SAP GUI 620 or 640
SAP BW Server 3.1c SAP GUI 620 or 640
SAP BW Server 3.5 SAP GUI 640.
But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
Any suggestions on that
Regards
Lalan

BOE XI 3.1 + SAP Integration Kit on AIX 5.3 with WebSphere 6.1 (SOLVED)

Hi everybody!
On a recent installation I encountered a problem with SAP Integration Kit using BW Query with prompts; I want to share with you what I did to solve this problem:
First of all, the environment:
IBM Server with AIX 5.3
BO Repository on DB2 9.5
Application Server IBM WebSphere 6.1
BOE XI R3.1
Crystal Reports 2008 SP1
After installing and configuring everything on the system, I encountered some problem launching in InfoView reports created with Crystal Reports 2008 based on BW query with SAP Prompts.
The error that I recieved everytime was:
com.sap.mw.JCO.$Function
What I did to solve this was:
1) Configure the absolute complete classpath inside the Application Server (path/sapjco.jar)
2) Put the sapjco.jar version 2.18 at 32bit (unix version) that you can download at https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000463654&
Hope this helping you
Bye
Andrea

Dear Gurus,
The issue I am facing is described exactly in the document "Upgrading to CR 2008 V1 / SP1" by Blair Wheadon.
The problem occurs when installing CR2008v1 and BOE 3.1 on the same machine.
The solution is to download and install SP1.
Unfortunately for me, I have downloaded SP1 but the installation is not going well.
Message prompts that installation files are corrupt and that I should download again.
I have downloaded twice. And tried several times.
So I guess it might be due to the platform.
But why wasn;'t the message displayed after BOE3.1 installation was completed?
Do you guys have an idea?
Alice

Crystal Report XI R2 compatablity with SAP Integration kit

Hi All,
we have suggested to one of our customer the Customized pack of BO XI Edge series which include the licensing of Xcelsius , WEBI , Universe designer, SAP Integration kit and Live office...
He dont want to pay extra for taking the license for cryatal report 2008 as they already using the Crystal Report XI R2 version which they use to do reporting on non SAP data.
My question is :
1 - Now they want to do reporting ove SAP data using the existing CR solution they have is it possible ??
2- Will the integration kit support the CR XI R2 version ??
3- Can he publish the Crystal Report created by CR XI R2 to the Business Object Edge Series plateform ??
They just want to use CR to do reporting on data from R/3 side .
Kindly suggest.
Regards,
Mishra,Vibhav.

Dear Ingo,
Thanks for the reply.
Actally we have suggested to our client the latest Edge Series Standard pack solution , excluding the crystal report licensing.
My question is will the integration kit which comes along with the Edge series will support the existing Crystal Report XI R2 and can the it be integrated with BOE(can he publish the reports created with the earlier version to the Business Object plateform).
If the above sceanario is not possibe then we have to purchse the older version of integartion and i doubt if we can purchse it stand alone in that case we would be having two integration kits running to solve the purpose.
Kindly suggest.
Warm regards,
Mishra Vibhav

Issue with SAP Integration Kit 3.0 to access Query BW on Crystal Reports

Hi All,
I've got an problem with my setup of Crystal Reports Server 2008.
I've install Crystal Reports Server 2008 and Crystal Reports 2008 on my Windows 2003 server.
My SAP Client is 7.1.
When i trie to connect my Reports on CR 2008, the connection doesn't work.
I have install SAP Integration Kit but it doesn't work because an error message says me that i've already install a Webserver for Crystal Reports Server 2008.
My Webserver is on IIS 6
My Database for CRS 2008 is SQL Server 2000.
Do you have any idea why it doesn't work ?
I have to install first my SAP Integration Kit 3.0 before install Crystal Reports Server 2008 ?
Thanks a lot for your help.
Regards.

Hi All,
I've got an problem with my setup of Crystal Reports Server 2008.
I've install Crystal Reports Server 2008 and Crystal Reports 2008 on my Windows 2003 server.
My SAP Client is 7.1.
When i trie to connect my Reports on CR 2008, the connection doesn't work.
I have install SAP Integration Kit but it doesn't work because an error message says me that i've already install a Webserver for Crystal Reports Server 2008.
My Webserver is on IIS 6
My Database for CRS 2008 is SQL Server 2000.
Do you have any idea why it doesn't work ?
I have to install first my SAP Integration Kit 3.0 before install Crystal Reports Server 2008 ?
Thanks a lot for your help.
Regards.

Integration with SAP BI - SAP BO XI integration kit or PerformancePoint?

Hi all,
We would like to get some thoughts on SharePoint integration with SAP BI.Could you please help us in solving the following questions:
1. Which one is better? SharePoint integration through PerformancePoint Server 2007 or SAP Business Objects(SAP BO XI integration kit)?
2. What are the starting point(system requirements) to develop a prototype on both the methods?
I was able to find some info on both PPS and SAP Business Objects from the sdn forums and also from sdn documents(those were really helpful,thanks!) but it didnt provide a detailed insight into which one to opt for or how you can goahead.If someone has got more info on this please let us know.
Thanks
Kukku

Hi Sergey,
That was really a very helpful peace of information on what I was actually looking for!
So as per my understanding PerformancePoint Server cannot report directly from SAP ERP(you mean SAP BI specifically right? ).So is there any third party software that we need to use for PPS integration with SharePoint?Are we still trying to connect to SAP BO or directly to SAP BI.
Also can you provide some info on what kinds of reports can we publish using PPS.
Please correct me if wrong.
We are trying to build a prototype on both type of integration.Our front end is SharePoint and our ultimate goal is to provide the SAP BI reports through SharePoint Portal.
Thanks
Kukku

Weblogic Integration Kit 3.5 with Service Pack 9

After installing VAJ35wls510sp9.jar, I got the following message when starting the WebLogic Server. Please advise.ThanksThe WebLogic Server did not start up properly.Exception raised: java.lang.NoClassDefFoundError: bea.jolt.pool.servlet.weblogic.PoolManagerStartUpPropjava.lang.NoClassDefFoundError: bea.jolt.pool.servlet.weblogic.PoolManagerStartUpProp

Nirav,
Thanks, will do.
Alex
"Nirav Chanchani" <[email protected]> wrote in message
news:[email protected]..
Alex,
The SP9 for the VisualAge Integration Kit has been tested with VAJ 3.5. Iwould
recommend contacting BEA Support.
Thanks,
Nirav.
Alex Garrison wrote:
How about it BEA? Should we hold off on sp9 until this is resolved or
is it
a user error?
Alex Garrison
"Michael Vo" <[email protected]> wrote in message
news:3b6832f5$[email protected]..
After installing VAJ35wls510sp9.jar, I got the following message whenstarting the WebLogic Server. Please advise.ThanksThe WebLogic Serverdid
not start up properly.Exception raised: java.lang.NoClassDefFoundError:
bea.jolt.pool.servlet.weblogic.PoolManagerStartUpPropjava.lang.NoClassDefFou
ndError: bea.jolt.pool.servlet.weblogic.PoolManagerStartUpProp--
Nirav Chanchani
BEA Systems, Inc.

BOBJ Integration Kit with Plone?

Similar Messages

Maybe you are looking for