BOBJ XI2 does't support Interval/Mandatory variable using bw query7?
hi,
I have create a bw query using Interval/Mandatory variable and a SAP EXIT variable. The query can run in Bex Analyzer, but I can't create a unvierse using this query. our BOBJ(SP4) and IK FOR SAP is XI2.
Is any support package or same idea to resolve this issue?
thanks.
Hi,
what is the issue when you generate the universe ?
ingo
Similar Messages
-
Error : Your CPU does not support long mode. Use a 32bit distribution
Hi
I was trying to Install Oracle Enterprise Linux on VM ware version 6.
My hardware is Intel 32 bit.
However while booting from the DVD im getting an error as "Your CPU does not support long mode. Use a 32bit distribution."
Please Advise
ThanksI had learned that the free DVD sets that Oracle ships are always for 64-bit systems. Owners of 32-bit systems will have to either download from http://edelivery.oracle.com or copy a distribution DVD from a friend. The 32-bit media can also be ordered from the http://oraclestore.oracle.com site for about $20USD.
Sorry for any confusion this may have caused. -
Getting error:- Your CPU does not support long mode. Use a 32bit distribution--?
I am using entire Oracle Stack..OEL, ORACLE VBOX
Trying to install guest OEL 5.6 x86-64 bit on virtualbox 4.3 on a (Dell 2950 Server with host OS OEL 5.6 x86-64 bit) .
and it complains of -->Your CPU does not support long mode. Use a 32bit distribution
I am struck and unsure how to proceed . I appreciate any help regarding this.
I enabled the VT (Virtualization Technology) option in the BIOS and then gave it a try. Does not work?Hi
Looks like the 64 Bit operating system is not supported. Enable the VT (Virtualization Technology) option in the BIOS and then give a try again.
Edited by: 891882 on Oct 28, 2011 1:21 PM -
TS4268 Does Iphone4 support Facetime Audio/Video using 3G? Or only when using Wifi?
Does Iphone4 support Facetime Audio/Video using 3G? Or only when using Wifi?
iPhone 4 does not support FaceTime over cellular, only Wi-Fi.
You need iPhone 4S or later and also only if the carrier supports it, -
Keep getting message saying current version of Safari does not support gmail, but I seem to have latest version (5.0.5). Is there an update I need?
Poroblem goes away when I use Chrome.Several older browser versions and ones that won't be upgraded without
a major system upgrade (a new OS X, if one is supported in hardware)
get similar messages when using Gmail & perhaps other google access.
If you want to experiment a little and the cost is zero, see the iCab browser
that is shareware but runs free with annoying prompt to buy a license, that
can be set to appear as Safari 6 to various web sites including Gmail. I've
tried it, and that does work. The iCab version that I found helpful works in
either PPC or Intel Mac OS X 10.5 ~ 10.7, there is a later version, too.
There is a recent iCab v.5.5 or an older iCab 5.1.1, since you could use
the more recent, I'd suggest that version over the older one which I have.
See http://www.icab.de/dl.php for iCab 5.5 (30.10.2014 or note a direct
DL link to that, here: iCab_5.5_Intel.zip -- either version is 32/64 bit.
Hopefully you can use the additional options without an OS X upgrade
to later system such as Lion. Sometimes an upgrade goes fine, but
there are good reasons to make a fully bootable clone on external HDD.
Then you could revert to a working copy of what you had before upgrade.
PS: If you are seeing two Safari versions in the Application folder, you
could use Get Info on each (separate, highlight one at a time) to find
what one is newest; then put the older one in Trash. Do not delete it yet.
The icon for Safari in the Dock may need to be replaced by dragging
the new Safari into the Dock, after dragging the old icon out of it...
but generally that part should not be necessary if only one Safari is
in the Applications folder. Be sure to not leave an app in the desktop
when it should be found by OS X in the Application folder.
The newer Safari should be in the Applications folder. Is it?
Check the Downloads folder in the Dock, to see where it went.
Sometimes, the browser's download info will show a history;
you can choose where downloads get stored.
Good luck & happy computing!
edited 2x -
Does iOS support syncing contact photos using Bluetooth PBAP?
I know iOS supports PBAP.
I know the PBAP protocol supports syncing pictures (http://www.spinics.net/lists/linux-bluetooth/msg28488.html)
Does iOS supports this too?No one would have any idea what Apple plans, unless they announse - which is very rare.
Iphone does not support bluetooth printing. -
I've just upgraded to Lion from Snow Leopard and to my surprise it does not support my 'Appleworks' application software. Ihave used Appleworks for all correspondence for six years and need to refer to the files (letters etc.) from time to time. Is my only option to revert back to Snow Leopard?
The reason appleworks no longer runs is because it is a powerpc based application. Since it's end-of-life in 2007, it was never converted to intel architecture, since it was dropped as a supported product. It continued to run on intel machines via rosetta, but OS X Lion formally discontinues all support for powerpc based programs. Powerpc based applications can only be run on OS X 10.6.8 or earlier releases (ones that still support rosetta).
So, it does sound like your best option is to move to iWorks' Pages now - otherwise you will be stuck with an increasingly more outdated operating system. And if you should buy a new machine, it would not run the older versions of OS X anyway, so at some point you have to leave appleworks behind and move on. Seems best to do it now, before Pages perhaps also moves forward to a point where it too may no longer support ancient file formats.
http://www.apple.com/support/appleworks/faq/ -
What are the points which the migration program does not support?
Hi,
I have a question about migration program 'RSEC_MIGRATION'.
As described in 'Running the Enterprise Data Warehouse',
in 'Frequently Asked Questions - Business Intelligence in SAP NetWeaver 2004s',
this program supports about 80% automatic migration
according to some documents.
What is the rest 20%?
What doesn't this program support?
Though it may be difficult to make a list for that
because settings of authorization objects are various,
I think SAP should list up as many important points
which this program does not support as possible
by using some examples.
If SAP thinks of delivering such a list,
when will it be delivered?
Best regards,
Kaito HosoyamadaHi Kaito,
this statement relflects the fact that a program will never be able to handle all potential complex scenarios that customers might have.
The facts that are not completely covered by the migration assistant are:
1.) The more complex the existing authorization concept, the more manual migration work might be necessary
2.) Customer-exit variables for 0TCTAUTHH cannot be migrated; the respective hierarchy nodes must be assigned manually
3.) Intensive tests are highly recommended
Cheers
SAP NetWeaver BI Organisation -
[ODBC Driver Manager] Driver does not support this function
HI every body
In Win Server 2008 R2 , I tried to retrieve data from my ODBC Driver
by Report Builder , my connection test is successful , but after any retrieve data by SQL Statement I encounter with this Error :
IM0001: [Microsoft] [ODBC Driver Manager] Driver does not support this function
I use Win Server 2008 R2 , and my ODBC Driver installed on :
%SystemRoot%\SysWOW64\odbcad32.exe
Can anyone help me to solve this problem, its realy urgent for me ,
PLEASE HELP ………………..ODBC Driver name is PMSDK (32 bit) and installed by Primavera software
I use SQL Report Builder to connect the driver and try SQL Statement in it
Report Builder may be executing an ODBC function to retrieve meta data, and that function is not supported by the PMSDK driver. Are you using the latest version of the PMSDK driver? You might try turning on ODBC tracing to find out the problem
function.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com -
Does iPhone5 support 5GHz band/channels
Does iPhone5 support 5GHz band/channels? If it does not support that I cannot use it. My neighbors all interfere on the 2.4GHz channels so I need to use the 5GHz channels to use WiFi on my phone. Home WiFi is getting too popular.
No problem. Enjoy it! It's a great piece of tech! Thanks for the points
-
Does Azure supports switching between databases?
We have 1000s of Stored Procedures, Views & Functions with 'SELECT * FROM DB1.dbo.TBL1' we constantly switch between databases (about 300 of them) within a single instance, running real-time on-line business. These are back-end SQL queries that
we normally run from one of the ADMIN databases with in the same instance.
I tried using 'USE <database name>' and realized that it does not support and then tried using <db name>.dbo.<tbl name> that also does not work.
If these 2 functions does not support within Azure we simply cannot use the environment to support our business databases, could someone please confirm this - thanks.Hello,
Yes. Cross database references or four-part names are not supported by SQL Azure.
Windows Azure SQL Database supports the three-part name database_name.[schema_name].object_name when:
• the database_name is the current database
• the database_name is tempdb and the object_name starts with #.
Reference:Syntax Conventions (Azure SQL Database)
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
Mandatory Variable in Key Figure(new selection) does not give Input Screen
Hi,
I have created a query based on a Multiprovider, which uses 0FIGL_C10 & one target DSO.
In colums I was trying to create one new selection type key figure using 0BALANCE infoobject, restricted it by 0FISCYEAR using one mandatory variable. When I am executing this query fiscal year variable is not asking for any value as input.
Being it a mandatory variable it should ask for some input, which is not happening.
Please suggest if I am missing something here or there is some problem with the SAP.
Regards,
Lokesh Kumar
+91 9871097220Only making a variable mandatory will not make it input enabled...it should be also " Variable ready for input" then only you will get input screen.
Rgds
Amit -
Error when opening a workbook with mandatory variables
BEx analyzer displays an error message window in the same time as the variable popup window.
The worbook is linked to 1 query that uses 2 mandatory variables (month ?, year ?), and was defined in the test system.
I assume that values are thus saved within the workbbok.
The developper had 0bi_all autorisation.
When a reporting user is opening it (also in the test system), the error message is displayed.
This happens only the 1st time when Analyzer is started, and by clicking on the OK button, we are able to run the query.
The next workbook refresh runs without the error message display.
Question = does anybody know the reason of this, and how to avoid the error message ?
more infos:
error message E019(R9E) appears for each variable (thus, 2 time with a query with 2 variables):
Help type 5 is not valid for the platform NONE
Exception 5 occured while calling IWB_HTML_HELP_URL_GET
the details of this error message is:
Diagnosis
You tried to start the online help with help type on platform. Help type is not supported on this platform.
System Response
Profile parameter eu/iwb/help_type must contain a valid help type.
Diagnosis
The documentation is not correctly connected to the BI server.
System Response
The documentation cannot be displayed.i checked the query and authorisation with RSRV, but this didn't help, furthermore, a lot a functions are not implemented in the system, sorry.
i also changed the query and workbook, and i think that it depends on the workbook release 3.x or 7.
imagine following situations: same query 7.0, same workbook 7.0
with BI7
1) opening the query with variables doesn't display the error message
2) refreshing the workbook with the query with variables displays the error message (only for a non mandatory variable - as soon as there is a variable, the error message is displayed)
3) refreshing the workbook with the query without variables doesn't display the error message
with BW 3.x
4) refreshing a new workbook 3.x with the query with variables doesn't display the error message
i also investigate in the function modules for workbooks (RS...), but nothing helped.
i still think that it is linked to authorisations, because with sap_all, the message isn't displayed.
how can i continue ?
Edited by: Claire Mignerey on Mar 17, 2009 2:37 PM -
"DBSL does not support extended connect protocol" while configuring SSFS
Hi, I'm trying to configure ssfs on ERP EHP7 on HANA Database system. Doing it with this guide - SSFS Implementation for Oracle Database
But when I'm trying to test connection with r3trans I got following error in the log:
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): DBSL does not support extended connect protocol
4 ETW000 ==> ssfs won't be used 26 0.004936
I already updated DBSL_LIB to the latest version, but it doesn't help.
Here is full log:
4 ETW000 C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE version 6.24 (release 741 - 16.05.14 - 20:14:06).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 02.06.2014 - 13:49:16
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Mon Jun 02 13:49:16 2014 106 0.000106
4 ETW000 [ dev trc,00000] db_con_init called 36 0.000142
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): ssfs will be used to get connect information
4 ETW000 61 0.000203
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 26 0.000229
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 17 0.000246
4 ETW000 [ dev trc,00000] Loading DB library 'dbhdbslib.dll' ... 46 0.000292
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEED100000
4 ETW000 3840 0.004132
4 ETW000 [ dev trc,00000] using "C:\usr\sap\CM1\DVEBMGS04\exe\dbhdbslib.dll" 21 0.004153
4 ETW000 [ dev trc,00000] Library 'dbhdbslib.dll' loaded 21 0.004174
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dbhdbslib.dll 42 0.004216
4 ETW000 [ dev trc,00000] Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.22) 81 0.004297
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dbhdbslib.dll 25 0.004322
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dbhdbslib.dll 41 0.004363
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 47 0.004410
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000) 24 0.004434
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.004452
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000205F170) 22 0.004474
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 17 0.004491
4 ETW000 [ dev trc,00000] New connection 0 created 17 0.004508
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 38 0.004546
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141BAEDB0) 44 0.004590
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 19 0.004609
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 19 0.004628
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 24 0.004652
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 17 0.004669
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 164 0.004833
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3 34 0.004867
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=74,arg_p=0000000000000000) 24 0.004891
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=15) 19 0.004910
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): DBSL does not support extended connect protocol
4 ETW000 ==> ssfs won't be used 26 0.004936
4 ETW000 [ dev trc,00000] { DbSlHDBConnect(con_info_p=0000000000000000) 31 0.004967
4 ETW000 [ dev trc,00000] DBHDBSLIB : version 741.10, patch 0.022 (Make PL 0.26) 34 0.005001
4 ETW000 [ dev trc,00000] HDB shared library (dbhdbslib) patchlevels (last 10) 32 0.005033
4 ETW000 [ dev trc,00000] (0.022) Get database version via dbsl call (note 1976918) 24 0.005057
4 ETW000 [ dev trc,00000] (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
4 ETW000 32 0.005089
4 ETW000 [ dev trc,00000] (0.020) SQL DDL with data aging (note 1897636) 21 0.005110
4 ETW000 [ dev trc,00000] (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
4 ETW000 30 0.005140
4 ETW000 [ dev trc,00000] (0.014) Tablesize calculation for HANA optimized (note 1952609) 25 0.005165
4 ETW000 [ dev trc,00000] (0.014) Native SQL UPSERT with DataAging (note 1897636) 21 0.005186
4 ETW000 [ dev trc,00000] (0.014) DBSL supports HANA revision number up to 3 digits (note 1952701)
4 ETW000 27 0.005213
4 ETW000 [ dev trc,00000] (0.010) Quotes missing by FAE with the hint dbsl_equi_join (note 1939234)
4 ETW000 28 0.005241
4 ETW000 [ dev trc,00000] (0.007) Obsere deactivate aging flag (note 1897636) 24 0.005265
4 ETW000 [ dev trc,00000] (0.007) Calculated record length for INSERT corrected (note 1897636)
4 ETW000 27 0.005292
4 ETW000 [ dev trc,00000] 15 0.005307
4 ETW000 [ dev trc,00000] -> init() 21 0.005328
4 ETW000 [ dev trc,00000] STATEMENT_CACHE_SIZE = 1000 181 0.005509
4 ETW000 [ dev trc,00000] -> init() 505 0.006014
4 ETW000 [ dev trc,00000] -> loadClientRuntime() 27 0.006041
4 ETW000 [ dev trc,00000] Loading SQLDBC client runtime ... 19 0.006060
4 ETW000 [ dev trc,00000] SQLDBC Module : C:\usr\sap\CM1\hdbclient\libSQLDBCHDB.dll 779 0.006839
4 ETW000 [ dev trc,00000] SQLDBC Runtime : libSQLDBCHDB 1.00.68 Build 0384084-1510 74 0.006913
4 ETW000 [ dev trc,00000] SQLDBC client runtime is 1.00.68.0384084 45 0.006958
4 ETW000 [ dev trc,00000] -> getNewConnection() 28 0.006986
4 ETW000 [ dev trc,00000] <- getNewConnection(con_hdl=0) 78 0.007064
4 ETW000 [ dev trc,00000] -> checkEnvironment(con_hdl=0) 34 0.007098
4 ETW000 [ dev trc,00000] -> connect(con_info_p=0000000000000000) 27 0.007125
4 ETW000 [ dev trc,00000] Try to connect via secure store (DEFAULT) on connection 0 ... 62 0.007187
4 ETW000 [ dev trc,00000] -> check_db_params(con_hdl=0) 61365 0.068552
4 ETW000 [ dev trc,00000] Attach to HDB : 1.00.68.384084 (NewDB100_REL) 7595 0.076147
4 ETW000 [ dev trc,00000] Database release is HDB 1.00.68.384084 49 0.076196
4 ETW000 [ dev trc,00000] INFO : Database 'HDB/00' instance is running on 'hanaserver' 6867 0.083063
4 ETW000 [ dev trc,00000] INFO : Connect to DB as 'SAPCM1', connection_id=201064 43659 0.126722
4 ETW000 [ dev trc,00000] DB max. input host variables : 32767 6954 0.133676
4 ETW000 [ dev trc,00000] DB max. statement length : 1048576 34 0.133710
4 ETW000 [ dev trc,00000] DB max. array size : 100000 75 0.133785
4 ETW000 [ dev trc,00000] use decimal precision as length 21 0.133806
4 ETW000 [ dev trc,00000] ABAPVARCHARMODE is used 19 0.133825
4 ETW000 [ dev trc,00000] INFO : DBSL buffer size = 1048576 20 0.133845
4 ETW000 [ dev trc,00000] Command info enabled 19 0.133864
4 ETW000 [ dev trc,00000] Now I'm connected to HDB 18 0.133882
4 ETW000 [ dev trc,00000] 00: hanaserver-HDB/00, since=20140602134916, ABAP= <unknown> (0) 30 0.133912
4 ETW000 [ dev trc,00000] } DbSlHDBConnect(rc=0) 18 0.133930
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=30,arg_p=0000000000000000) 24 0.133954
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.133972
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F460) 22 0.133994
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.134012
4 ETW000 [ dev trc,00000] Connection 0 opened (DBSL handle 0) 36 0.134048
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=7,arg_p=000000000205F4B0) 25 0.134073
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 17 0.134090
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=63,arg_p=000000000205F2B0) 23 0.134113
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.134131
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F300) 12214 0.146345
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 32 0.146377
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=11,arg_p=000000000205F420) 26 0.146403
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.146421
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=22,arg_p=000000000205F390) 23 0.146444
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 37 0.146481
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=13,arg_p=000000000205F260) 29 0.146510
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.146528
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=24,arg_p=000000000205F210) 37 0.146565
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 35 0.146600
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=51,arg_p=000000000205F200) 40 0.146640
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=15) 31 0.146671
4 ETW000 [ dev trc,00000] { DbSlHDBPrepare(con_hdl=0,ss_p=000000000205F4E0,op=3,da_p=000000000205F540)
4 ETW000 46 0.146717
4 ETW000 [ dev trc,00000] -> buildSQLStmt(stmt_p=000000000205F4B0,da_p=000000000205F540,for_explain=0,lock=0,op=3)
4 ETW000 89 0.146806
4 ETW000 [ dev trc,00000] <- buildSQLStmt(len=27,op=3,#marker=0,#lob=0) 33 0.146839
4 ETW000 [ dev trc,00000] -> stmt_prepare(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0) 75 0.146914
4 ETW000 [ dev trc,00000] sc_p=0000000003AEAC40,no=0,idc_p=0000000000000000,con=0,act=0,slen=27,smax=256,#vars=0,stmt=000000000AD913E0,table=SVERS
4 ETW000 46 0.146960
4 ETW000 [ dev trc,00000] SELECT VERSION FROM SVERS ; 23 0.146983
4 ETW000 [ dev trc,00000] CURSOR C_0000 PREPARE on connection 0 21 0.147004
4 ETW000 [ dev trc,00000] } DbSlHDBPrepare(rc=0) 6174 0.153178
4 ETW000 [ dev trc,00000] { DbSlHDBRead(con_hdl=0,ss_p=000000000205F4E0,da_p=000000000205F540)
4 ETW000 53 0.153231
4 ETW000 [ dev trc,00000] ABAP USER is not set 25 0.153256
4 ETW000 [ dev trc,00000] -> activate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540) 25 0.153281
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,da_p=000000000205F540)
4 ETW000 30 0.153311
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=0,col_cnt=0) 21 0.153332
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
4 ETW000 54 0.153386
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
4 ETW000 33 0.153419
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000 33 0.153452
4 ETW000 [ dev trc,00000] -> exec_modify(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,bulk=0,in_out=1,da_p=000000000205F540)
4 ETW000 36 0.153488
4 ETW000 [ dev trc,00000] -> stmt_execute(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,in_out=1,da_p=000000000205F540)
4 ETW000 95 0.153583
4 ETW000 [ dev trc,00000] OPEN CURSOR C_0000 on connection 0 28 0.153611
4 ETW000 [ dev trc,00000] CURSOR C_0000 SET InputSize=1 23 0.153634
4 ETW000 [ dev trc,00000] CURSOR C_0000 EXECUTE on connection 0 22 0.153656
4 ETW000 [ dev trc,00000] execute() of C_0000, #rec=0, rcSQL=0, rc=0 6404 0.160060
4 ETW000 [ dev trc,00000] CURSOR C_0000, rc=0,#rec=0,#dbcount=0 36 0.160096
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,da_p=000000000205F540)
4 ETW000 33 0.160129
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=1,col_cnt=1) 21 0.160150
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,types=000000000205F518,#col=1,useBulkInsertWithLobs=0)
4 ETW000 37 0.160187
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=72,rec_lng=144,db_lng=144
4 ETW000 31 0.160218
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=144, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000 31 0.160249
4 ETW000 [ dev trc,00000] -> allocIndicator(in_out=1,row_cnt=1) 21 0.160270
4 ETW000 [ dev trc,00000] -> allocData(in_out=1,size=1048576) 21 0.160291
4 ETW000 [ dev trc,00000] -> bind_type_and_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,arr_size=1,types=000000000205F518,da_p=000000000205F540)
4 ETW000 45 0.160336
4 ETW000 [ dev trc,00000] -> exec_fetch(sc_hdl=0000000003AEAC40,bulk=0,da_p=000000000205F540)
4 ETW000 41 0.160377
4 ETW000 [ dev trc,00000] xcnt=1,row_i=0,row_pcnt=0 20 0.160397
4 ETW000 [ dev trc,00000] -> stmt_fetch(sc_hdl=0000000003AEAC40) 20 0.160417
4 ETW000 [ dev trc,00000] CURSOR C_0000 FETCH (xcnt=1) on connection 0 23 0.160440
4 ETW000 [ dev trc,00000] next() of C_0000, rc=0 27 0.160467
4 ETW000 [ dev trc,00000] fetch() of C_0000, #rec=1, rc=0, rcSQL=0 28 0.160495
4 ETW000 [ dev trc,00000] -> deactivate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540,rc=0)
4 ETW000 91 0.160586
4 ETW000 [ dev trc,00000] -> StmtCacheFree(DBSL:C_0000) 24 0.160610
4 ETW000 [ dev trc,00000] CURSOR C_0000 CLOSE resultset on connection 0 20 0.160630
4 ETW000 [ dev trc,00000] } DbSlHDBRead(rc=0) 34 0.160664
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=43,arg_p=00000001400FAB06) 25 0.160689
4 ETW000 [ dev trc,00000] INFO : SAP RELEASE (DB) = 740 19 0.160708
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 16 0.160724
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=41,arg_p=00000001400FAB98) 49 0.160773
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 19 0.160792
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002055888) 22 0.160814
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.160832
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002055880) 22 0.160854
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 26 0.160880
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=52,arg_p=00000000020558F0) 23 0.160903
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 17 0.160920
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=20,arg_p=0000000141FC74F0) 99 0.161019
4 ETW000 [ dev trc,00000] INFO : STMT SIZE = 1048576 21 0.161040
4 ETW000 [ dev trc,00000] INFO : MARKER_CNT = 32767 18 0.161058
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 19 0.161077
4 ETW000 [ dev trc,00000] NTAB: SELECT COMPCNT, UNICODELG FROM DDNTT WHERE TABNAME = 'SVERS'...
4 ETW000 38 0.161115
4 ETW000 [ dev trc,00000] { DbSlHDBPrepare(con_hdl=0,ss_p=0000000002055160,op=3,da_p=00000000020551B0)
4 ETW000 31 0.161146
4 ETW000 [ dev trc,00000] -> buildSQLStmt(stmt_p=0000000002055180,da_p=00000000020551B0,for_explain=0,lock=0,op=3)
4 ETW000 32 0.161178
4 ETW000 [ dev trc,00000] <- buildSQLStmt(len=63,op=3,#marker=0,#lob=0) 23 0.161201
4 ETW000 [ dev trc,00000] -> stmt_prepare(sc_hdl=0000000003AEACD8,ss_p=0000000002055160) 38 0.161239
4 ETW000 [ dev trc,00000] sc_p=0000000003AEACD8,no=1,idc_p=0000000000000000,con=0,act=0,slen=63,smax=256,#vars=0,stmt=000000000AE09690,table=DDNTT
4 ETW000 38 0.161277
4 ETW000 [ dev trc,00000] SELECT COMPCNT, UNICODELG FROM "DDNTT" WHERE TABNAME = 'SVERS' ; 21 0.161298
4 ETW000 [ dev trc,00000] CURSOR C_0001 PREPARE on connection 0 19 0.161317
4 ETW000 [ dev trc,00000] } DbSlHDBPrepare(rc=0) 6453 0.167770
4 ETW000 [ dev trc,00000] db_con_test_and_open: 1 open cursors (delta=1) 30 0.167800
4 ETW000 [ dev trc,00000] db_con_check_dirty: 1 open cursors, tx = NO , bc = NO 18 0.167818
4 ETW000 [ dev trc,00000] db_con_check_dirty: db_con_dirty = YES 16 0.167834
4 ETW000 [ dev trc,00000] { DbSlHDBBegRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
4 ETW000 35 0.167869
4 ETW000 [ dev trc,00000] ABAP USER is not set 23 0.167892
4 ETW000 [ dev trc,00000] -> activate_stmt(sc_hdl=0000000003AEACD8,da_p=00000000020551B0) 23 0.167915
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,da_p=00000000020551B0)
4 ETW000 32 0.167947
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=0,col_cnt=0) 23 0.167970
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
4 ETW000 34 0.168004
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
4 ETW000 30 0.168034
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000 31 0.168065
4 ETW000 [ dev trc,00000] -> exec_modify(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,bulk=0,in_out=1,da_p=00000000020551B0)
4 ETW000 32 0.168097
4 ETW000 [ dev trc,00000] -> stmt_execute(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,in_out=1,da_p=00000000020551B0)
4 ETW000 32 0.168129
4 ETW000 [ dev trc,00000] OPEN CURSOR C_0001 on connection 0 20 0.168149
4 ETW000 [ dev trc,00000] CURSOR C_0001 SET InputSize=1 19 0.168168
4 ETW000 [ dev trc,00000] CURSOR C_0001 EXECUTE on connection 0 20 0.168188
4 ETW000 [ dev trc,00000] execute() of C_0001, #rec=0, rcSQL=0, rc=0 5712 0.173900
4 ETW000 [ dev trc,00000] CURSOR C_0001, rc=0,#rec=0,#dbcount=0 34 0.173934
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,da_p=00000000020551B0)
4 ETW000 32 0.173966
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=1,col_cnt=2) 21 0.173987
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,types=0000000002055240,#col=2,useBulkInsertWithLobs=0)
4 ETW000 34 0.174021
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=2,#int=0,#llong=0,#uc=0,rec_lng=16,db_lng=4
4 ETW000 30 0.174051
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=16, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=65536)
4 ETW000 32 0.174083
4 ETW000 [ dev trc,00000] -> allocIndicator(in_out=1,row_cnt=65536) 20 0.174103
4 ETW000 [ dev trc,00000] -> allocData(in_out=1,size=1048576) 30 0.174133
4 ETW000 [ dev trc,00000] -> bind_type_and_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,arr_size=65536,types=0000000002055240,da_p=00000000020551B0)
4 ETW000 36 0.174169
4 ETW000 [ dev trc,00000] } DbSlHDBBegRead(rc=0) 24 0.174193
4 ETW000 [ dev trc,00000] { DbSlHDBExeRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
4 ETW000 35 0.174228
4 ETW000 [ dev trc,00000] ABAP USER is not set 20 0.174248
4 ETW000 [ dev trc,00000] -> exec_fetch(sc_hdl=0000000003AEACD8,bulk=0,da_p=00000000020551B0)
4 ETW000 33 0.174281
4 ETW000 [ dev trc,00000] xcnt=1,row_i=0,row_pcnt=0 20 0.174301
4 ETW000 [ dev trc,00000] -> stmt_fetch(sc_hdl=0000000003AEACD8) 20 0.174321
4 ETW000 [ dev trc,00000] CURSOR C_0001 FETCH (xcnt=1) on connection 0 20 0.174341
4 ETW000&Hi,
Could you check for SAP Note 1952701 - DBSL supports new HANA version number
Regards,
Gaurav -
Strange IE ExternalInterface Bug: "Object does not support this property or method"
We have an application on a relatively slow server (I mention
the speed because it may be relevant).
The app is flash 8 and uses ExternalInterface to call a
javascript function in its parent page. It also used the
ExternalInterface to receive a call from another function. These
calls happens separately (the outbound one calls up a list view of
items, clicking on an item calls up the details in the flash
movie). In between the calls, the flash movie is hidden by moving
it off screen using absolute positioning.
On my local development box (Windows XPSP2) this works fine
in both directions.
On our production server (LAMP) this works fine in both
directions in Firefox 1.5 and 2.0
BUT while the outbound call from Flash to the page works fine
in Internet Explorer 6 or 7, the call back from the page to the
flash movie fails with the error messgage "Object does not support
this method or property"
We've tried not hiding the flash so it is always present on
the page and still the browser > flash communication breaks in
ie.
We've tried using both the Adobe active content script and
swfobject to embed the flash in the page with no difference in the
resultset. In truth we've given up and gone to a two-page solution,
reloading the flash from the start each time but I wondered if
anyone had encountered a similar issue? Can't see why it would work
perfectly in FF but not in IE.Not sure if this is your problem, but you do reference the
Flash object
differently, depending on the browser. In a video player we
made, that uses
JS to communicate back to Flash, I use a function like this
to modify the
variable depending on the browser:
function changeVideo(xname){
//ff
if(window.vplayer){
window.document["vplayer"].SetVariable("theXML", xname);
window.document["vplayer"].GotoFrame(2);
window.document["vplayer"].Play();
//ie
if(document.vplayer){
document.vplayer.SetVariable("theXML", xname);
document.vplayer.GotoFrame(2);
document.vplayer.Play();
The Flash is in a <div> named 'vplayer'
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/
Maybe you are looking for
-
Trouble syncing and backing up
When I plug my phone into iTunes, it shows up under devices so iTunes recognizes it, but it will not sync or back up. The button for syncing is grayed out and cannot be clicked and when I try to back up it clicks but doesn't do anything. Also, the
-
I need to know how to install Elements_10 on my iMac running Snow Leopard without overwriting or eliminating Bridge (CS4) which was bundled with my Elements_8 software. I prefer not to use the Organizer which comes as part of Elements_10.
-
Placing the same image on every page.
Hi! I want the epub pages to show an image on the right corner. Is it possible to do it... with InDesign? I don't want you to teach me how to do it, just tell me if it's possible and I'll try to do it. I want the pages to look like this:
-
I have just created a new playlist, at the same time I have updated the ITunes software and that of my ITouch. My problem is that today I have been trying to edit the playlist and the edit playlist is greyed out please help. I have been in preference
-
Some concurrent managers show status deactivate
some concurrent managers like Workflow Document Web Services Service SFM Application Monitoring Service SFM Controller Service SFM Event Manager Queue Service and many others they show status deactivated in Concurrent ---------> Manager ----------> A