BODS 3.1 and Teradata 12 : AL_ENGINE process hanging issue

Hi All,
We are loading into Teradata 12 target tables using BODS 3.1 and sometime a BODS process is left hanging on Teradata side which blocks the target table. Lock has to be removed by Teradata DBA before the job can be executed sucessfully. On the Teradata side the log shows its a AL_ENGINE process via port 3326 using javaw. on BODS side as the job hangs we kill the job and looking at the processes on BODS server no AL_ENGINE process from the repository from where the ETL job was executed from is hanging. BODS is installed on AIX OS and connectivity to Teradata 12 is via an ODBC driver.
The occurence of this issue is highly erratic and not confined to one specific ETL job.
Majority of the job executions are being initiated from the BODS management console.
Thanks,
rana

Check licensing on 3750x stack. suspect master has IP services, other member have only IP Base.

Similar Messages

High CPU/Process hang on VDI environment

I have a environment that is currently using Adobe Reader XI running on roughly 125 virtual desktops.
In some of those instances, when adobe reader was launched and closed after, the process hangs up in the background and takes on high CPU. The only means to recover is to open task manager and kill the offending .exe
Thoughts?

Can you try to disable Protected Mode in Adobe Reader [Edit | Preferences | Security (Enhanced)].

HT2477 I just purchased the IMac and was in the process of setting it up and got locked out. A password is being requested and I did not establish one. Is there a default password for the imac?

I just purchased the iMac and was in the process of setting it up and it locked up, requiring me to put in a password. I never established a password, does the iMac have a default password?

If you have been using the mac.com Apple ID to make iTunes purchases recently, then there should be no issues continuing to use it with the new iPhone. I would abandon the new ID as you will never get Apple to merge the two IDs. I have had a mac.com ID for years and continue to use it with my iPhone 4S.
Tell us the issues that you encounter trying to set up the iPhone with the mac.com account.

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy

My iPod Classic 160GB is recognized by computer, and goes through sync process, but still has old stuff...

My iPod Classic 160GB is recognized by computer, and goes through sync process, but still has old stuff...
I feel like there must be an issue with the library location, but I don't know how to correct that. My Dad recently wiped my computer and deleted Windows XP and installed Windows 7. I don't know what he did, but my iTunes library is still intact it seems. However, I've added quite a few podcasts that I'd like to sync to my iPod. When I connect it, it goes through the sync process, but ends quickly and says its safe to disconnect. None of the new podcasts are on there though.
Also, there was something really wrong with my iTunes account. When I went to buy something from the store, it wouldn't accept my password, and when I went to reset it, it wouldn't recognize my birthdate and month (I had the correct username). I ended up creating a new account and purchasing a song. This time, it did sync the new song onto my iPod, but not the podcasts I'm trying to sync.
As far as the library location, is there anything particular that has to be included in that library in order for it to be recognized by iTunes when you sync? Awhile back (before my Dad worked on my computer), I had changed the folder location to my external hard drive, but in researching, I saw that I still had in another drive some folders with music that is currently on my iPod. So it looks like I have some stuff on two different drives... Maybe this has something to do with it not syncing right?
I did check, and my Firewall doesn't have iTunes blocked.
As you can see, I'm not very experienced with all of this... Sorry for the confusion. If you are interested in helping me and have any questions, please let me know.
I'm hoping someone will be able to help me... I desperately want to be able to listen to my podcasts, as I'm a stay-at-home Mom of 4 little ones, and the podcasts are kind of an "escape" for me when the children are napping or playing. :-)
Thank you in advance for your help!

Oh my goodness!! I am absolutely thrilled right now B-rock!! I don't know how I missed it, but when I went back to change the setting like you mentioned, I noticed that the very top box that says "Sync Podcasts" wasn't checked! I have no idea why... But my heart started to race when I checked that box and all of a sudden it started syncing all my podcasts!! It's gonna take a long time (I have 385 of them!), but I am just so happy you helped me with this problem. Thank you SO much!

My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progressbar do not start

My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progress in the bar did not start yet after 5 hours. Some one please hep me.

I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.

List of issues and fixes for procure to pay process and order to cash process for a trading company

Dear All Gurus
Kindly tell me where I can find the list of all issues arising in procure to pay process
and order to cash process and there fixes for a trading company in support project
Thanking You
Abdul Baseer

Hi Abdul,
There are no standard list to provide, you should identify the issue through regression testing and raise an SR or create a thread accordingly we can help you.
Note:- Issues are vary to instance to instance, version to version, installation to upgrade etc..

Back and Forth Logic in process-controlled (BRF) workflows in SRM 7.0

Hi all,
I am using the process-controlled workflow in SRM 7.0.
The approval itself works ok, but now I am trying to set up the back-and-forth functionality (similar to how it worked for the Badi in SRM 5.0) as default:
This is what happens:
Requester creates shopping cart.
Shopping cart goes for approval.
Approver rejects SC.
Back at the requester the SC can only be displayed, but not changed.
As far as I can tell this happens for any kind of decision set (as long as all items are rejected).
This is what I am trying to set up.:
Once the SC is back at the requester, he can either accept the rejection OR change the SC and 're-order' it ie send it back to approver again.
I know if the requester checks the flag 'Work Item to Requester at Process End' this can be done, but I need the system to have this functionality automatically without setting a flag manually.
I really appreciate any suggestions on this issue.
Cheers
Ulrike

Dear Masa,
thanks for your helpful answer. I have an better idea now, but I am still not quite able to set it up.
I have applied note 1296209.
When i tried to set up this step I did the following:
level type of that step I used 'Approval with completion'.
Created Expression of type SAP Formula Interpreter, with return type Boolean, and use formula:
0V_WF_CURRENT_DECISI = 'REJECTED'
linked the evaluation id to above expression.
Task id for the step is: 40007994 - Accept Decision / Adjust Document
When i do this and create a SC, my system dumps after clicking on describe requirement::
The following error text was processed in the system SR7 : The method could not be found at dynamic call.
The error occurred on the application server SAP01_SR7_07 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: CALL_RFW of program /SAPSRM/CL_WF_RULE_CONTEXT====CP
      Function: /SAPSRM/WF_BRF_0EXP000 of program /SAPSRM/SAPLWF_BRF_DATA
      Method: PROCESS_SPECIFIC of program CL_CALL_FUNC_METHOD_BRF=======CP
      Method: IF_RULE_COMPONENT_BRF~PROCESS of program CL_EXPRESSION_BASE_BRF========CP
      Method: GET_RESULT of program CL_EXPRESSION_POOL_BRF========CP
      Method: IF_EXPRESSION_BRF~GET_SUBEXPRESSION of program CL_EXPRESSION_BASE_BRF========CP
      Method: IF_FOEV_CONNECTOR~EVALUATE of program CL_FORMULA_BRF================CP
      Method: EVALUATE of program CL_FOEV_FORMULA===============CP
      Method: EVALUATE of program CL_FOEV_FORMULA===============CP
      Method: EVALUATE of program CL_FOEV_FORMULA===============CP
What I don't understand about your explanation is what you mean by "Acceptance by Contact person". I don't have that option anywhere in my BRF? Is that supposed to show up under Resp. Resolver Name (like RR_MANAGER)?
Also where did you add that step in Process level configuration? I have 2 approval steps (just approval, without completion) and then i wanted to enter this step after those levels before the automatic system decision. But i wasn't able as the system doesn't allow you to add a completion step after a 'normal' approval step.
Cheers for your help
Ulrike

Problem description: My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed

Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (24-inch, Early 2008) (Verified)
    iMac - model: iMac8,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR2 SDRAM 800 MHz ok
        BANK 1/DIMM1
            2 GB DDR2 SDRAM 800 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 8800 GS - VRAM: 512 MB
        iMac 1920 x 1200
System Software: ℹ️
    OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
    Hitachi HDS721010KLA330 disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.printtool.agent.plist
    [killed]    com.apple.SafariNotificationAgent.plist
    [killed]    com.apple.sbd.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.warmd_agent.plist
    11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.AssetCacheLocatorService.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.nesessionmanager.plist
    [killed]    com.apple.periodic-daily.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.wdhelper.plist
    [killed]    org.cups.cupsd.plist
    12 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    ChronoSyncBackgrounder    Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
    Google Drive    Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 6.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
    iPhotoPhotocast: Version: 7.0
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    WebEx: Version: 1.0 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
    Adobe Version Cue CS2 [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    VIA PrefPane [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         3%    WindowServer
         3%    Mail
         2%    com.apple.iCloudHelper
         1%    Creative Cloud
         1%    Google Chrome
Top Processes by Memory: ℹ️
    223 MB    Google Chrome
    150 MB    Finder
    129 MB    Google Chrome Helper
    112 MB    Mail
    69 MB    Google Drive
Virtual Memory Information: ℹ️
    35 MB    Free RAM
    1.45 GB    Active RAM
    1.45 GB    Inactive RAM
    888 MB    Wired RAM
    27.01 GB    Page-ins
    851 MB    Page-outs

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

"up and running no message processing until now"

Hi,
I am doing a multiline scenario with File Content Conversion. In Adapter Monitor, Message is processed in the sender CC and in the Receiver CC it shows "up and running no message processing until now"
Whats mean by this ?. What is the status of my message ? Where I can monitor the message send from sender communication to the Receiver communication channel (If not in SXMB_MONI ?)
Thanks,
Ram

hi,
check adapter message monitor:
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp
you should see all message over there
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

I tried updating to iOS 8.1 but it have the apple symbol and a blue screen pops up and it restarts the process and its been going on about 3 weeks already. I dont know what to do? Is my iPad broke cause I just got that iPad in August.

I tried updating to iOS 8.1 but it have the apple symbol and a blue screen pops up and it restarts the process and its been going on about 3 weeks already. I dont know what to do? Is my iPad broke cause I just got that iPad in August.

Hi You may have a hardware fault take ipad to Apple Store. Ring then first to make an Appointment take box and you purchase paperwork they may give you A replacement. Before you do that Try a Reboot hold down power button & menu button hold both down until you see Apple Logo you may need to hold down for up to 30 Seconds But you may need to do this more than once. If it doesn't work take back to Apple Store. Cheers Brian

OWB 10gR2 map returning status = Complete and Result = Null in Process Flow

Hi,
I have an OWB process flow which invokes an OWB map. There are 2 outgoing transitions attached to the OWB map. 1st transition is a conditinal one (on SUCCESS) and the 2nd one is unconditional transition.
I am monitoring the status of process flow execution in Oracle Workflow monitor. After the process flow is initiated, sometimes the OWB map within shows status = complete and result = OK in workflow monitor (in tab - status). But sometimes it shows status = Complete and Result = Null. In this situation the execution is following the unconditional transition path.
Can anyone tell me what causes the OWB map to return a Result = NULL? Also sometimes I am getting the map returning a Result = Force (with the same status = Complete).
The configuration that I am working with is as below ---
OWB client version : 10.2.0.1.31
OWB repository version : 10.2.0.1.0
Oracle Workflow Version : 2.6.4.0.0
Database version : 10g Enterprise edition release 10.2.0.1.0
Regards,
Swagata

Hi Manohar,
1. You need to install Oracle HTTP server in a separate Oracle home.
2.Look for the dads.conf file in the installation. Edit the file, copy the sample code and paste it below and edit the pasted part as under ----
<Location /pls/<SID>>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseConnectString <server name>:<port>:<SID >
PlsqlAuthenticationMode Basic
PlsqlDefaultPage wfa_html.home
PlsqlNLSLanguage "AMERICAN_AMERICA.WE8ISO8859P1"
</Location>
3. STOP and START OPMN (Oracle Process Manager & Notification Server)
4. Use the URL in your internet browser like --- <HTTP server URL>/pls/<SID>/wfa_html.home
5. When prompted for user id and password, give the schema user id and password where the workflow engine is installed.
Hope this helps,
Swagata

HT201210 tried to do an over the air update from ios 7.0 to ios 7.0.2, my phone is in a Recovery Mode loop, I am unable to restore via ITUNES, in ITUNES I try to click RESTORE, it downloads 1 item and then tries to process and loops......how do I correct

tried to apply the IOS 7.0.2 update to my Iphone 4 running IOS 7 last night, the process failed and the device is in some type of Recovery Mode, when I try to restore using latest version of itunes it appears to download 1 item, then posts a message of 'iphone software update (processing file)' but does not ever appear to complete, please tell me how I can get this corrected, thank you!

a quick update, I turned off all security software on my windows desktop and tried this 'Restore' process via iTunes again and it appears to be processing....what an unbelievable PITA

I have a Panasonic camcorder PV-GS65 and I used to be able to connect to my iMac and my machine would automatically recognize the camera, rewind the tape, and start the import process as soon as I turned the device on and it was connected. not anymore

I have a Panasonic camcorder PV-GS65 and I used to be able to connect to my iMac and my machine would automatically recognize the camera, rewind the tape, and start the import process as soon as I turned the device on and it was connected. Now my iMac does not even see my device
Any suggestions?

You cannot install the apps on the car.
The cars head unit is merely acting as an interface to the apps on the device.
If you want to use those apps in the car, plug the device in and leave it plugged in.

I signed up for a free trial. I want to convert a Word document to a PDF document. I've signed in and been through the process a dozen times. It doesn't work.

I signed up for a free trial. I want to convert a Word document to a PDF document. I've signed in and been through the process a dozen times. It doesn't work.

Hi kemtnilion,
What did you get a trial of? Adobe doesn't offer free trials of the Acrobat.com online services; did you get a free trial of Acrobat, perhaps? If so, you can save a PDF directly to Word from Acrobat, by choosing File > Save as Other > Microsoft Word > Word Document.
Please let us know if you have additional questions.
Best,
Sara

BODS 3.1 and Teradata 12 : AL_ENGINE process hanging issue

Similar Messages

Maybe you are looking for