BOE 3.0 Designer does not show the table browser

Hi,
I am using BOE 3.0. I was able to view the table browser a few days back. After I changed the license key, the designer stopped showing me the table browser. I am logging into Designer with Administrator previleges. Although the Administrator has "Full control", but when I click on "Insert->Tables" in designer it does not do anything, not even display the table browser. I have created Oracle client connection and tested it. The server is responding, but the insert-> tables does not work.
Any help would be appreciated.
Thanks,
SUS.

1. When you invoke table browser using Insert->Tables do you see progress bar below the designer (task Bar)
Sus: Yes I can see the progress bar. It exists for a few seconds and then disapperas,but does not do anything.
2. Can you try invoking Table browser by double clicking on Universe designer pane.
Sus: Yes I tried, but nothing happened. I mean I could not see the table browser
3. Can you check if Designer can connect to your DB.
Sus: Yes the designer is able to connect to the DB. I tested the connection and got the message "Server is responding". In fact when I am using the quick design wizard I can able to see the tables from my DB.
4. How many tables do you have in DB, IF there are lot many table then it might table time to load those tables
Sus: Currently my DB contains almost 40(20 tables and 20 views). I don't think it is concern. I worked with DB which contains more than this and that time I did not face this issue.
5. Can you strategies tab in parameters (File->Parameters). What is the strategy for Tables. Try using built-in strategy.
Sus: Yes it is built-in for tables. It is the default one and I did not change it.
Is there a limit set to insert tables in designer?
-Sus

Similar Messages

PI sheet does not show the table of materials to be consumed.

Hello,
Weu2019re trying to customize the pi-sheet on SAP 4.7 (SAP-APPL Release 470) and weu2019re having some problems.
On transaction O12C (Define Process Instruction Categories), weu2019ve created an Instruction Category for Material Consumption using Type of the process data request equal to Repeated process data request. Doing this, when we create a Process Order, the PI sheet does not show the table of materials to be consumed.
If we use Type of the process data request equal to Simple process data request instead of Repeated process data request, the PI Sheet works well (The table of materials to be consumed are showing).
Thanks in advance.

Hi,
Is the issue resolved...? If yes then how...
If not, then can you please elaborate more on the process instructions charateristics you have used. Just list first ten characteristic and there values.
Regards
Neeraj

Creating new ODBC connection does not show the tables

Post Author: reemjacob
CA Forum: Data Connectivity and SQL
Hello
I am creating a new ODBC Connection to SQL Server in Database Expert. Once I created the ODBC when I expand the Database I should be seeing the tables, views and stored procedures. But instead I am only seeing stored procedures. When I right click on the DB and go to options I see that Tables, Views and Stored Procedures are checked. How can I correct this so that I see the Tables and Views?
Regards
Reem

Not an Oracle proble. Not an instant driver problem.
If the ODBC tool and driver you use, fail to construct the proper SQL to interrogate the very rich Oracle data dictionary.. what is Oracle suppose to do? Fix the software from those vendors for the user? Not going to happen. Get Oracle Raptor instead and use a proper Oracle client.
Simple test. Run the following SQLs via your ODBC connection.
To see all your objects in your schema (i.e. the one you logged into via ODBC):
SELECT * FROM user_objects
To see a list of schemas:
SELECT username FROM all_users ORDER BY 1
To view other schemas' contents:
SELECT * FROM all_objects
Also note that historically ODBC has delivered poor performance. I recall many performance tests I've done during the 90's that showed ODBC up to 3x slower and generating more than 4x the network traffic, than native connections. Not too mention using ODBC introduces an additional software layer, which means more moving parts, more complexity, and more failures.
I have not touched ODBC with the proverbial 10ft pole since - and today, I have even less need to use a clunky software layer like ODBC. And should I be forced to, it will be passthru all the way.

Firefox 4 does not show the current browsing history, and I cannot acess my privacy tab in the options

My browsing history is incomplete, it only shows through August. I also cannot access the privacy tab in the options folder, nor can I click on the stop private browsing.

Maybe your Trend Micro took over the Privacy tab in Options?
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts

I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
do I have to partition it and name it first. -- if so just one partition?

Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Acrobat Pro "save as" function in the file menu does not show the current directory of the file

I have installed CC but Acrobat Pro gives me headaches.
The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
I use Windows7 professional 64bits.

I use what seems to be the latest version available on the Cloud:
To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
So here it is, open:
When I do a "Save as", it takes me to a totally different place on the disk!
Very annoying...
Thanks for your time!
JJ

My playlists show how many titles are in the playlist but does not show the list of titles

my playlists show how many titles are in the playlist but does not show the list of titles. Is there a setting that I hit by mistake to hide the content?

Perhaps you have made one column extra wide and the window isn't currently showing the Name column. Try resizing columns, turning off those that you don't need, or scrolling sideways.
tt2

I have an I phone 4s and I have many contacts in my phone. However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number. I have checked every setting I can think of ?

I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??

If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed.

' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

mardemar wrote:
... - the only one without an x delete button.
What is the name of this App and where did you get it...?

BOE 3.0 Designer does not show the table browser

Similar Messages

Maybe you are looking for