BOE XI 3.1 - Universe Designer Installation

Guys,
Is it possible to get the UNIVERSE DESIGNER setup (Package) alone instead of go with BOE full installation package?
I have the BOE installation full package.
Every time i am installing the Designer in below way to my users,
           Custom/Expand installation --> Deselect all the client components; Select "Universe Designer" --> Install Designer
I want to make the installation in easy way.
I found that 'Web Intelligence Rich Client" Client Package is available in ALONE as well as in BOE FULL Installation Package.
i can install this 'Web Intelligence Rich Client' in either way.
Thanks in advance.
Regards,
Kiruba v.r.

Hi Simon,
I know this process. Even i am doing the same to my users machine.
But i am looking for 'Universe Designer' individual client package as like 'Web Intelligence Rich Client'.
Note: I am not getting any error message.

Similar Messages

  • SAP Integration Kit doesnu00B4t see Universe Designer Installation

    I installed BOE Enterprise Client Tools XI 3.1 on my machine and updated to most current SP and FP.
    When I want to install SAP Integration Kit, I get the message "No Crystal Reports or Universe Designer found".
    What can be the issue?
    Edited by: B.Wegner on Nov 18, 2010 10:47 AM

    Hi
    Here what i mean was
    first install BOE 3.1
    Then SAP IK 3.1
    Now install BOE 3.1 Latest SP/FP
    Then Install SAPIK 3.1 Latest SP/FP
    Regards
    Ashwini

  • Problem with Queries Structures in Bex Query Designer and Universe Designer

    Hi everyone,
    I have a problem when i try to do a Universe from a Bex Query Designer.
    When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
    EJ:
    1) Bex Query Designer
    Colunms
    (Structure) ZSRT_123
                          - (Characteristic Restrictions) Reg Guayana
    >          (InfoObject)     0Product = 'XXX'
    >          (InfoObject)     0Country = 'YYY'
         - (Characteristic Restrictions) Reg Caracas
    >          (InfoObject)     0Product = 'AAA'
    >          (InfoObject)     0Country = 'BBB'
    Rows
    (Structure) ZSRT_456
                   (Key Figure)     Net Sales
    2) Universe designer
    (Class) ZSRT_456
    >(Measure)      Net Sale
    (Class)     ZSRT_123
    >(Dimension)      ZSRT_123
    The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
    Any information would be much appreciated. Thank you.

    Hi,
    I assume that you are using BOE XI 3.1 SP2.
    We have added an option in SP2 to generate or not the L00 level.
    Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
    I recommend to always generate L00 in order to have your structure generated correctly.
    This issue will be fixed in SP3.
    Regards,
    Didier

  • SSO does not work in Universe Designer

    Hi,
    I have a problem getting an error within Universe Designer the error is :
    "DBD: Unable to connect to SAP BW server Incomplete logon data"
    Installed below :
    BOBJ XI 3.1 installed
    SAP GUI 7.10
    SAP Java Connector
    SAP Integration Kit
    All is run on the server machine.
    SSO setup i CMS etc. and i works fine in the beginning and i can go into Universe Designer and create a SSO connection which responds etc. and i can create universes which is fine. I can go to webi and create an new report using the universe and select som measures and dimension and execute query, but it only works a couple of times then it starts to fails with an xml error. After that going to universe designer an into connection i cannot longer get in touch with my Bex query in SAP BW ! and that is where my problem allways ends, so now i cannot connect using SSO in Universe Designer.
    Found technote 1250890 but it only says that i need to install integration kit on my client, but my installation is all i one and is installed.
    Any suggestion would be much appreciated !
    Rgds,
    Kim

    Hi,
    I've had this problem to . I found information in trace log by SAP BW side
    A  Error Code CALL_FUNCTION_SIGNON_INCOMPL.
    A  Module  $Id: //bas/700_REL/src/krn/rfc/absignon.c#9 $ SAP.
    A  Function isignon_do_it Line 177.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end RX_RFC
    M  *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c  947]

  • Universe Designer is disappeared when univ is  'save as' PDF

    Hi All,
    Iam getting the error  , Iam using the BOXI Desginer with FP 1.7 on Windows XP.
    Universe Designer is disappeared when universe is  'save as'  as PDF.
    It is creating the blank PDF.
    Please suggest any workaround solution.
    Regards
    Mahesh

    Hi,
    I am using BOE XI3.1 SP2 and I have no problem with the "Save as PDF" feature.
    I recommend to upgrade your version or cretae a support ticket.
    Regards,
    Didier

  • Error While Accessing Universe Designer

    Hi All,
    I am facing an strange issue - I have BO Installation on windows server - 2003.
    As a client when iam trying to access the server from diffrent location i am able to access CMC and Polestar.
    But When i am trying to access universe designer - it shows an error -
    Cannot access Repository ( uSR0013)
    [repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.(FWM 00001)
    (hr=#0x80042a01)
    Any suggestion.
    I am able to telnet my server ip with port 6400 and 8080.
    Thanks

    I think there is some problem because of firewalls.
    Could some one tell me what are the list of ports need to be opned for server client model.
    i asked network team to open the ports 6400 -6410 only.
    Do i need to open ports ??
    My BO server installation is default and CMS is on - 6400. and i haven't configured anything else.
    pls suggest the approach.
    Thanks

  • Unable to find BW Query while creating connection with universe designer

    Hi colleagues,
    I've got BOE XI 3.1 SP2, Integration for SAP 3.1 SP2 and the following inssue )
    Some of BW queries that were previously released for external access and succsefully used for WebI reports now cannot be find while creating a connection in universe designer. Those are still releasde for external access but I'm not able to find some of them in the list, tried search as well.
    Has anybody faced the same problem?
    Thanks

    Hi Ingo
    SAP GUI               710 Patch 15
    BI Components       7.10 Patch 1001     
    BW 3.5 Components     3.50 Patch 6
    Actually as I figured out there were some reasons to manualy set req.status to 7 for that info-provider
    I used massive regeneration for needed queries eventually,
    BR Max

  • Can Universe designer recognize hierarchies (nodes) define in a dimension t

    Hello,
    Using BOE XI 3.1 SP3.
    We have hierarchies (nodes) defined in our dimension tables.
    Does the designer will recognize them? If yes, how?
    Do we have to re-create these hierarchies in the custom hierarchy panel?
    If the Universe designer doesnu2019t recognize these nodes defined in the dimension tables, which other SAP products will? OLAP (it will require creating aggregate fact table (cube) first, right?), Voyager?
    Iu2019m looking for functionality similar to what Cognos-PowerPlay has.
    Thanks.

    Hi,
    Thanks for the interesting link.
    If I understood well BO will take advantage of nodes/hierarchies defined within dimension tables only if the data resides on either a BW database or a OLAP (aggregated ) tables.  If my data source (star schema or 3rd normal)  is at the lowest atomic level then I have to manually defined the hierarchy via the hierarchy panel of the designer.  BO designer can't take advantage of what has been already defined in a dimension table.
    Thanks.

  • Universe Designer - Port connections

    Hi there
    I'm not sure if this is in the right category, so please move if need
    A 3rd Party did our BOBJ installation, and left the system to us to look after. whenever users open up Universe Designer, it connects to a <random> port, the first time the system started up, it connected to port #: 49771. After a server downtime restart, it now tries to connect to port 59339.
    Seeing as we need our telecoms provider to open up the correct (and not sap standard) ports, i need to know what i can do to force it to use 1 port, each and every time.
    Is there a way to do this?

    You must configure the port and requestport on the CMS server and Input FRS.
    Sincerely,
    Ted Ueda

  • HTTPError 404 CmsApp InfoView after installing Polestar/Universe Designer

    Hello Experts,
    After Installation of Polestar and Universe Designer we get a httpError 404.
    Now when I try to go to the login page of CMC or InfoView I get an error:
    HTTP Status 404 - /PartnerPlatformService/service/app/logon.do
    type Status report
    message /PartnerPlatformService/service/app/logon.do
    description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
    we redeployed all applications with:
    wdeploy.bat tomcat55 deployall  => the problem still exists
    In the tomcat- Manager i can see, that /CmcApp is running
    If anyone know how to fix the above issues Please let me know.
    Best regards
    Lutz

    new deployed

  • How to remove the negative sign in universe designer?

    hi all,
    have used BEX query designer first to create the query, for the key figures, i have choose 'reverse sign' option and in the BEX analyzer report, it showing correctly with the figure having 'reverse sign'.
    however, the 'reverse sign' was not being carried over to universe designer when i tried to create a universe from the BEX query created earlier on. how do i find the option to 'reverse sign' in universe designer for the key figures?
    pls help.
    thank you.

    Hi,
    i tried creating  new 'measure' object with function 'sum', in the select statement, how should add in the multiply by -1?
    i tried typing this -> @Select(Marginal Profit\Marginal Profit) x -1 in the Select box but it failed during the parse part.
    FYI, the 'marignal pofit' above is the original 'measure' object that i want to have its negative sign reversed.
    pls help.thanks.

  • Row level security at universe design level

    Hi,
    I am creating a Universe layer on top of non SAP OLAP cube ( from MS Analysis Services 2005 ) .
    My concern is that can we maintain the row level or data level security at universe design level or if i am using that universe in creation of WEBI report so is there any possiblity to maintain this security at WEBI level.
    Regards,
    Mishra Vibhav.

    Thanks for the reply.
    Much Appriciated.
    My only concern is that i read in the Universe Designer developer guide that it does the row level security so can eloborate a bit about how we maintain at Universe level.
    Warm Regrads,
    Mishra Vibhav

  • DECODE SQL Function - Parsing error in Defining Objects in Universe Designe

    Hi,
    I have created a class and an object in BO XI R3 Universe designer.
    I am getting the parsing error while defining the object when using the custom SQL as
    select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE'),decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019)) as TYPE from wh_cf_cmsu
    The object Type is "character", i have tried with Long Text, Number, Date as well and the same sql works fine by returning String values through TOAD.
    Do we have any constrains in using DECODE in BO XI R3 or any other syntax please....
    Please guide me in resolving this issue.
    Thanks,
    Karthik.

    Hi,
    1.At back end check the data type for matteraction column and define it accordingly in object definition.
    2. Try to break your select clause definition into smaller parts and check it where the exact issue is  as below
    i.select decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019) ............
    ii.select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE') ..........
    iii.select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE'),decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019)) as TYPE from wh_cf_cmsu

  • Error when setting up connection from Universe Designer to Oracle database

    Hello,
    I am attempting to create a connection to an Oracle 10 database in Universe Designer.  I am currently running Business Objects XI 3.1 SP3 on a 32 bit machine.  I have the Oracle client installed.  In Universe Designer when I attempt to create a new connection using the Oracle 10 client I receive the following error.
    CS:DBDriver failed to load : C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll (The specified module could not be found.)
    The dbd_oci.dll file does exist in the directory listed above.  Has anyone encountered this issue?
    Thanks in advance.
    Brock

    Hello Brock,
              Do you have multiple SQL clients installed on your system? If so, uninstall the previous versions. Check if the PATH variable is set to correct bin path and then try testing it again.
    Regards,
    Sanjay

  • Baan with Universe Designer

    Has anyone successfully built a Universe against a Baan database?  We are looking at the possibility either using a Baan driver for Universe Designer (if this exists) or connecting to the Oracle system underneath.
    Any help is much appreciated!
    Thx
    James

    No idea but some things to check:
    - Are you running some other application which might be using the Designer SDK on your machine?
    - If you launch Designer and leave it there for 5 minutes without doing anything does the error comes up
    --> some background agent might be interfering? Or is it triggered only if you actually work with Designer?
    - What is the title of the popup window (Designer.exe or is it a Window system message error?)
    Regards
    PPaolo

Maybe you are looking for