BOFC: Connect a productive system

I have a little issue to set up the productive system. My guides canu2019t help me very much maybe someone has any guide for my issue:
I have created one data source as a top (development) where I have created structures, category scenario, reports, u2026 Then I have created another data source as a child (productive). This should be the site for all productive stuff (data entry/import, consolidation, data analysis). My question is how can I create a connection between both data sources that I can transfer objects from development to productive.
Can you help me?

I will answer my own question:
You have to create any side on top database which should be the productive site. Then start the receive task on the child data source. The information will be received an the site will be automaticly created on the child database. Now you can receive objects from the TOP-Site.
Hope, it will be helpfull for anybody.

Similar Messages

How to transport the connection in production system

hi
I have a doubt releaated to connection between SAP BI and Xcelsius.
We have a development server on which i have created universe and then on it Qaaws and finally Xcelsius dashboard.
My doubt is in future they will transport the SAP BI system from Development system to Production system.
In this case Universe ,Qaaws,Xcelsius will work?
will i have to develop this again in production system, or any how it will work with production system?
How excetly development work here when we have connection between SAP BI and Xcelsius in different system from development to quality and then in Production?
Thanks,
Piyush

Hi
assuming that the objects (keyfigures, characteristics, multiprovider) of the underlying query are available in your production system you do not have to create your universe again, rather change the connection data to your SAP server (like SYSID, client number etc) in the universe connection.
Additionally if you are working ith BO XI 3.1 I would suggest to take a look to the LifeCycleManager, a tool which can simplify the transport process from your development to your production environment.
Regards,
Stratos

Display Datasource in Source System -- connects to Production ERP

Hello,
We have performed a System Copy of BI Prod. In the copied system on one of the Generic DataSource (ZBIP_VKDFSEXT) when I right click and say "Display Datasource in Source System", it is connecting to Production ERP, supposedly it must be connecting to Dev ERP.
I have tested RFC COnnections and Logical System Settings in WE20 and 21, but they are pointing to DEV ERP.
Correct replies appreciated.
Thanks
SM
Edited by: SM on Jul 9, 2011 5:32 AM

Dear SM,
I guess we have faced same kind of issue earlier,
at that time we just removed RFC connection between production system because we are not using Production system connection any more.
and then just clicked on connection parameter of source-system, there we defined new RFC destination.
Hope it will solve your issue.
Regards,
Ashish

Protect Production Systems from Local SLD installations

If we have several developers in our organization with Local Development Workstations (meaning they installed a local copy of WAS 6.40, MaxDb, Portal) how do we prevent those developers from setting up there local SLD to connect to Production Systems. If they set up a production system in the local SLD they will be able to configure their "adaptive rfc webdynpros" to connect to the production system with the jco connections in the Webdynpro Content Administrator. Is the only control point their id they would enter when configuring the jco connection?

YOu need the authorization for login in SLD as admin
Follow this link for compete details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Are there any impacts/differences between exporting/importing and creating the systems manually? For example if I cannot export the systems would it be ok if I created them again in the production SLD?
No differeence...it's just increase the work you have to do in SLD...but the important thing here is when you move the tranports of the SLD BS from DEV to Production you have to maintin the same name as you have maintained in the trnsport targets in the DEV......your ID tranport to Production is dependedn on what is the BS name you are mentinog of production in the transports targets.

CALL_FUNCTION_OPEN_ERROR in CRM while trying to connect to ECC system

Hi All,
We are having issues while connecting to ECC system from CRM at specific point of time.
It occurred only once yesterday . Since it is a production system, we need to investigate the cause of the issue.
Upon checking the logs, I can see dumps in ST22 stating CALL_FUNCTION_OPEN_ERROR while trying to connect to ECC.
This issue has been faced by multiple users at the same time.
Both CRM and ECC are in the same server . There are no errors in ECC system ,
The error description says
Error opening RFC connection
Error text........... "Group USER not found"
Description.......... "LgIGroupX"
The response time is fine for the system and during the time when the error occurred.
Both the systems are in kernel 720 patch level 416.
There are no errors in dev_rd and dev_ms as well.
The errors in trace file also give information that ECC system cannot be reached.
However our ECC system was available , up and running and there were no issues at that time with ECC.
I have attached the dump, kernel and patch level details , work process trace files and the response times.
Please suggest.
Thanks,
Sowmya.

LB: Hostname or service of the message server unknown#DEST =PUCCLNT220#MSHOST
=puc.apps.eon.com#R3NAME =PUC#GROUP =USER"
disp+work information
kernel release 720
kernel make variant 720_EXT_REL
compiled on Linux GNU SLES-11 x86_64 cc4.3.4 use-pr121116 for linuxx86_64
compiled for 64 BIT
compilation mode UNICODE
compile time Feb 16 2013 02:50:12
update level 0
patch number 416
source id 0.416
Error from work process trace file
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526      , ta:                     ), sending RUDILOCK_RESET
M
M Mon Apr 20 15:48:09 2015
M ThPlgTimeout: ThPlgTimeout for plugin T144/U17974
A
A Mon Apr 20 15:58:59 2015
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c    9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
A
A Mon Apr 20 15:59:02 2015
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c    9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c    9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c    9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1

Support message and change requests only for production system

Hi guys,
I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
Kind regards
Rayko

Hi Rayko,
We do not have this option.
Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
Best Regards,
Fernando

RFC connection to source system is damaged , no Metadata uploaded

Hello Friends,
I need your help to understand and rectify why my transport is failing again and again.
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata upload
Environment - Production Support (Dev - Quality - Testing - Production)
Alive scenario - Need to create two InfoObject and incorporate the fields in to data targets and reports.
What we have did?
1st request - We have created new request and captured two Infoobjects in to the request.
2nd Request - We have captured the replicated Datasource along with that the below sequence displayed by default in the same package.
Communication structure
DataSource Replica
Transfer Rules
InfoSource transaction data
Transfer structure
3rd Request - we have captured DSO and Cube only in this request.
4th Request - Captured 2 update rules (ODS) Update Rule (Cube)
The above 3rd request failed in the testing system (successful in Quality System) and ODS is inactive in the Testing system.
Testing system Error Message:
The creation of the export DataSource failed
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object ZEOINV09
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/AZEOINV0900)
Table /BIC/AZEOINV0900 could not be activated
Return code..............: 8
Following tables must be converted
DDIC Object TABL /BIC/AZEOINV0900 has not been activated
Error when resetting ODS Object ZEOINV09 to the active version
So we have captured the data mart Datasource and created a new( 5th ) request (transported only 5th request )and transported in the below sequence
Communication structure
Datasource Replica
Transfer Rules
Infosource transaction data
Transfer structure
development to Quality - Successfully
Failed in testing system again.
How to rectify this error, please help us
Thanks,
Nithi.

Hello All,
*Question -1*
I have checked the connections and typed the steps below - what i have seen in the screen.
Steps :
R/3 Connection - I have double clicked on the BT1CLNTXXX and tested the connections.
Connection Type :
Logon - 0KB , 10 KB , 20KB, 30 KB
R/3 connection:
5 msec, 0msec, 1msec,1msec,1msec
Please let me know whether RFC connection is OK or not.
Question - 2
I want to know is there is any option to check before transporting the TR from Developement to Quality - "Preview Check " the sequence , so that we can avoid the Transport failure because of TR sequence.
Regards,
Nithi.

Could you please explain when we connect R/3 system to BW

Hi,
could you please explain when we connect R/3 system to BW
1. Procedure
2. SAP BW need to do anything
3. Effort required by SAP BW
Regards,
kranthi

Hello Kranthi,
When we need to make a conncetion between R/3 & BW , First logon to R/3 system , Go to T/code - SM59 .
There u find connections . Select on ABAP and click on New
Then Provide the description
Go to technical settings tab :
Provide load balancing : No
if you know the server name : give it in the target host name
or give the IP Address ;
Then after that go to logon & Security Tab :
provide the RFC user ID , Client & Password .
And now check the connection by clicking on the connection test
If it shows some 2mins ,like that then it is ok ...
Otherwise then it is a problem ...
repeat the same thing by giving the target as R/3 here .
now go the RSA1 , select the source systems , create source systems
Select BW source systems
give the target system details , such as system no . System ID ,server name ..
And also background user id & password for both the target systemm & source system .
Now Select the created source system , context menu & Check the connection .
This job is performed with the help of basis people , not only by BW team .
This is maintaince is done for every system ( Dev , Qaulity & production seperately )
Thanks
PT
Edited by: PT on Dec 9, 2008 11:17 AM

Same logical system name for two productive systems - BW, PI issues

Dear all,
we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
However as far as I know:
- we cannot connect systems with same logical system name to BW,PI
- we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
How can we overcome the problem?
Please advice.

> However as far as I know:
> - we cannot connect systems with same logical system name to BW,PI
> - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
Right.
> How can we overcome the problem?
Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
Markus

Transaction Launcher: Logical System in Production System does not change

Hi,
I created a transaction launcher in the CRM development system (CRD) to launch the transaction IL02 in the ECC 6.0 system (ECD). Then I transported the changes from CRD to the CRM production system CRP. I also transported the changes from ECD to ECC production system ECP.
However, when I see the transaction launcher in CRP system, it is still configured for the URL of ECD. I want the transaction launcher to connect to ECP. One option I have is to change the class name in the CRP system. However, I am not allowed to create a new ABAP class in the production system. Is there any other way to change the target system automatically in production system?
Thanks,
Rohan.

Thanks Piyush. Could you be a bit more specific? I followed these steps:
1. In transaction CRMS_IC_CROSS_SYS, created a logical system URL for production system
2. In customizing setting Copy/Delete Launch Transactions, deleted the transaction launcher id.
3. In customizing setting Configure Transaction Launcher, created the same transaction launcher id newly.
I still am not able to change the logical system. However, I can do it if I change the class name.
While deleting the transaction launcher id, should I be deleting all dependencies?
Regards,
Rohan.

Error connecting multiple BW systems to one OLTP system

Hi BW Gurus,
As part of a major project we had to create a copy of our production BW system and thus have two BW systems connected to one production R/3 system. Before we proceed with the production systems, we decided to try it out with our staging systems.
1) Created a copy of STG BW (already connected to STG R/3) and renamed it to TST BW.
2) Transaction BDLS, renamed the logical system ID
3) Made sure all partner profiles were available and active
4) Since there was no connection between TST BW and R/3 STG, tried to activate the source system in TST BW. As per OSS note 886102, tried the restore functionality but we are running into a strange error.
Table RSBASIDOC in the source system already has an entry for STG R/3 and STG BW with IDOC TYP ZSSA015 and Prefix "SA" and now it complains that since this prefix alrady exists, it cannot create another entry with the same prefix for TST BW and STG R/3. It gives us the option to delete the existing entry and create a new one for TST BW. This in turn de-activates the delta between STG BW and STG R/3 and we can successfully initialize with the new system.
This process turned the queue entry in RSA7 red for STG BW and created a new one for TST BW (green). Delta stopped working for STG BW.
How can I have both the systems connected and run delta process simulataneously? I have read OSS note 775568 but this is after the fact that the two systems are already connected.
If I have to start from scratch, can someone please outline the steps involved?
Do I have to restore the source system or is there an alternate way? I cannot see how the delta would work if there is no connection betweeen the two systems.
Do I even need to worry about initializing with the TST BW System or can I just run the delta process and it would automatically add another entry in RSA7.
Any help would be truly appreciated and rewarded!!
Thank You.
Sreedhar

Looks like a much bigger issue than that. We did create the partner profile in WE20 but that didn't help either. It still complains about the prefix. This 2 Character prefix value is actually derived as the concatenation of the first letter of the BW system name and starting alphabet in a sequence. In our example STG BW has prefix of SA and the basic idoc type is ZSSA015. Based on this, TST BW system should have prefix of TA and basic idoc type might be ZSTA016. The program initially looks at RSBASIDOC table for source system and finds value SA and complains that this cannot be used again.
I have seen messages in this forum where people have actually done this and hopefully someone would reply back as to how to resolve this issue.
My main question though is, do we have to restore or activate or do not have to do anything to the source system after the copy of BW systems? None of the above three options seem to work for us right now.
Any ideas?
Thank You
Sreedhar

Steps to connect a CRM system with MDM

Hi everybody,
I've got a problem here : I should build a connection between a CRM system and MDM (get the data in several tables in the CRM system, normalize them in MDM and then put them back in the CRM).
What would the steps I've got to do to achieve that ? Do I need XI between the two systems ? Do I have to map the tables before sending them in MDM (and how could I do that ?)
Thank you for all the help you can give me
Seb

Hi
The Universal Worklist (UWL) iView is part of the KMC (Knowledge Management and Collaboration), capability of SAP NetWeaver. The integration of the SAP NetWeaver MDM workflow with UWL will be provided with SP04. This will provide the ability to expose SAP NetWeaver MDM workflow steps in the SAP Universal Work List (UWL). These jobs may run from the BPM process or can be launched inform within SAP NetWeaver MDM. UWL is defined as the main consolidated Inbox for SAP users, being the main location to monitor jobs directly activated in SAP NetWeaver MDM, or connected to a process that integrates with SAP NetWeaver MDM.
Using the SAP NetWeaver Portal UI, show a summarized list of all workflow (WF) jobs/tasks from all systems of SAP NetWeaver MDM Landscape per user - one single UI for all my tasks. The UWL is already integrated with other major SAP products, like R/3, SAP CRM, mySAP ERP, etc.
https://sapportal.wdf.sap.corp/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/infocenters/ws%20ptg/ptg/platform%20ecosystem/industry%20standards/projects%20and%20programs/business%20process%20management/index.html
First of all, you must set a RFC connectivity between CRM and backend system:
o     Create system users for remote connection (RFC_CONN). This user must have SAP_ALL authorization.
o     Create RFC connections in CRM system.
Go to transaction SM59 on CRM side and click on 'create' button. Set RFC destination name to the back-end system <sid>CLNT<client> (eg. R3DCLNT200), connection type to 3 (abap / R/3 connection) and fill the target host to your back-end system. On the Logon/Security tab, add the RFC_CONN user created in the previous step. Save your settings.
o     Create RFC connections in the back-end system.
Go to transaction SM59 on the back end and click on 'create' button. Set the RFC destination name to CRM system <sid>CLNT<client> (eg. CR1CLNT300), connection type to 3 (abap / R/3 connection) and fill in the target host to your back-end system. On the Logon/Security tab, add the RFC_CONN user created in the previous step. Save your settings.
o     Create a logical system name in CRM.
Go to transaction SPRO -> SAP Implementation Guide -> Customer Relationship Management -> CRMServer -> Technical Basic Settings -> ALE Settings -> Distribution -> Basic Settings -> Logical Systems -> Define Logical System Add a new value:
Save your settngs.
o     Create a logical system name in the back end.
Go to transaction SPRO -> SAP Customizing Implementation Guide -> SAP Web Application Server -> Application Ling Enabling -> Sending and Receiving Systems -> Logical Systems -> Define Logical System Add a new value:
Save your settngs.
2.
3.     Middleware parameters setup Go to transaction SM30 on backend system and choose table CRMCONSUM. Add the following values:
4.     Next, choose CRMSUBTAB for subscription table for the Up and Download Object and add the following values
User     ObjectName     U/D     Obj. Class     Function     Obj. Type     Funct. Name
CRM     empty     Download     Material     empty     empty     CRS_MATERIAL_EXTRACT
CRM     empty     Download     Material     empty     empty     CRS_CUSTOMIZING_EXTRACT
CRM     empty     Download     Material     empty     empty     CRS_SERVICE_EXTRACT
Next, choose CRMRFCPAR for definitions of RFC Connections and add the following values
User     ObjectName     Destination     Load Type     INFO     InQueue Flag     Send XML
CRM     *     SR1CLNT300     Initial Download     SR1CLNT300     X     Send XML
CRM     *     SR1CLNT300     Request     SR1CLNT300     X     Send XML
CRM     MATERIAL     SR1CLNT300     Initial Download     SR1CLNT300     X     Send XML
Leave all other field empty.
Now, configure filtering for the material master:
Choose the CRMPAROLTP table for CRM OLTP Parameters and add the following values:
Parameter name     Param. Name 2     Param. Name 3     User     Param. Value     Param. Value 2
CRM_FILTERING_ACTIVE     MATERIAL     empty     CRM     X     empty
Now we must edit the table for the application indicator. Go to transaction SE16N on the back-end side and choose table TBE11. Search or add an application component BC-MID and edit activity settings (field AKTIV = X).
Save your settings.
8.     Enterprise buyer with/without CRM In this activity, you define whether you are running the Enterprise Buyer and CRM in the same system. This might accelerate the Master Data download performance. If you are using CRM in the client, then skip this activity.
In the CRM system run transaction BBP_PRODUCT_SETTINGS, deselect 'Test mode' and choose the Execute button.
The system generates a report containing all tables that have been deactivated.
9.     Generate repository objects With this procedure, you generate the middleware function modules (BDoc Object Type) for the material master.
Go to transaction SMOGGEN and choose object PRODUCT_MAT and PRODUCT_SRV. Generate services for all object categories.
Please let me know your email id, i shall send you this document
Regarsd
Rehman
Reward Points if Useful

Possible to connect multiple R3/Systems to one XI?

Hi,
is it possible to connect mutiple R3-Systems to one XI?
How does it work?
Regards
Stefan

Stefan,
You can certainly connect multiple R/3 systems to one XI.
1. If your R/3 system release is 4.7 then use point 8 from the configuration guide. (RZ70 transaction collects the system data and creates a technical system in the SLD)
2. If your R/3 system release is < 4.7 (means 46c or 46B, 40B) then you should create a technical system in the SLD.
3. For any other SAP product with ABAP stack (including R/3 47 system), you should check the SAP_BASIS release if it is 6.20 you should apply XI Add-on to use XI Proxy adapter. For SAP_BASIS < 620 you cannot have XI Proxy adapter. For SAP_BASIS > 6.20 you do not need any add-ons (from this point onwards it is NetWeaver)
To find SAP_BASIS release -> SPAM Transaction -> Click on Package Level.
Then create a business systems for each one of them and import them into the Int. Directory when needed.
Regards
Shravan

IDOCs error in Production System

Hi Gurus,
In Production system, there is a CRM oppertunities process chain is running on hourly basis, the data was updated to DSO successfully, but for the past one week it was not updating to further processing InfoCube, there is an error.
error: Idoc Ready to be transferred to application.
Please update me step by step procedure.
Thanks

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks
Reddy

Couldn't create jco client connection for logical system

Dear Experts,
we are facing a strange issue in our custom webdynpro java application, few of our portal users are getting the "couldn't create jco client connection for logical system" for Model Data JCO Destination. below are details
1. portal version 7.02 SP14 (we have recently updated to SP14 from SP02-- is this is causing the issue ?)
1.1. updated the NWDI track with SP14 SCA files as well as added latest WD Runtime SCA file deployed the applications to Production also.
2. above said exception is inconsistent and happening for only few users
3. ping and test of jco destinations are successfull in content administration as well as in SLD, destinations were added in the SLD system.
4. cleared the JCO ARFC meta data cache in webdynpro console
5. jco destinations are configured using uid/pwd, configured user is not locked active and tested in the backend by logging in with the same user.
6. restarted the portal server
even though, we are getting the above said exception for few of portal users randomly.
Please help me on this ASAP, as i am not getting any further help on this.
Thanks,
Ram.

Hello Ram,
Check the JCo Pool Configuration settings of your JCO Destination. This message normally comes when the maximum connections has been reached. Increase the "Maximum Connections" to some number depending on the usage. A good habit is to disconnect the jco connection after executing the same in your webdynpro code if you don't want it to be synchronous.
<ModelName>.modelInstance().disconnectIfAlive()
Hope this helps.
Regards
Vijay

BOFC: Connect a productive system

Similar Messages

Maybe you are looking for