Bogus error(s) during the evaluation message
I want to inspect references declared inside a block such as a conditional
or try block. Assume you add those to the Expressions list in debug mode,
correct? The problem is the expression is added but the evaluation shown is
<error(s) during the evaluation>.
How do we inspect local block variables? Side question: where is the stack
frame? I would like to click on the stack frame to jump around and inspect
variables at various points along the call stack leading up to my current
break point.
TIA,
Rod
Ignore, wrong newsgroup.
Similar Messages
-
Hi-
I am trying to activate Data Source 0FI_AP_50, however, I noticed on the BW side when I tried to pull in data nothing would come back. I stated tracing backwards and looked at Extraction via RSA3 in source system. At that time I received the error: "Errors occurred during the extraction" Message no. RJ012. The data source is active and data is available in the corresponding tables.
Any suggestions?
Thanks,
MarkHi Mark,
Unfortunately I do not have SAP_ALL in my system for me. But as far as I remember you should follow below path:
Goto Tcode SFW5:
Expand second node - scroll down and choose ENTERPRISE_BUSINESS_FUNCTIONS - FIN_REP_SIMPL_1 - Reporting Financials - check it and Activate changes
Then you might have to relogin again.
One more important thing: try this in Development System only first. Also really important to contact your FI team for impact analysis.
As far as I know these business functions are not possible to revert back
Thanks
Amit -
Errors occurred during the extraction, Message nos. RJ012 & R3009
Hi All,
I am trying to view the data for one of the custom generated Extractors - 3FI_GL_0L_TT using T-code RSA3. But when I try to execute to see the data, i get an error message "Errors occurred during the extraction, Message no. RJ012". I check the log, and in the log, the message is as below:
The extraction program does not support object 3FI_GL_0L_TT
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 3FI_GL_0L_TT.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
I found many posts in SDN but none of them helped. Infact I found a note - 1069507, which provided a correction for exactly the same error but Basis informed me that the note is not applicable as it is given for only "bank-alyze" component & we don't have this component in our systems.
Did anyone have the same issue with the custom generated datasource in FI-GL for Totals table? Please advice.
ThanksHi,
I got the same error and we have cross client environment but in both environments i got the same error. So tcode SCC1 will not solve my problem and i have to take another way to solve it.
Debugging the datasource, i found out where the error came from: FM SMOX3_DSOURCE_DETAIL, consulting the table: smoxhead_s.
I will let u know if i get some news.
Regards -
Errors occurred during the extraction, Message nos. RJ012
Hi Gurus,
I have created one generic data source using FM for CO-PA and it's in activate staus in rsa6. When I checked the data in RSA3, it's saying below message
Errors occurred during the extraction
Message no. RJ012
Please help me to resolve this issue.
Thanks & Regards,
SakethHi Saketh,
The cause of the error can be some missing code that you didn't add to the function modul.
You can check the document at the below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?overridelayout=t…
Thanks&Regards,
Oya. -
Errors occurred during the extraction (Message no. RJ012)
Hi
I created the data source successfully based on Operating Concern (account based).
But in RSA3 the same data source not showing any data though the related COPA tables having the data.
What could be the problem?
As per the log, I searched in SAP there is some note saying need to apply the patch BANK_ANLAYZER
Regards
VenkatI just had the same error. RJ012 in the BW system and RD155 in the source system.
I overcame this by creating summarization levels for CO-PA account-based.
see thread COPA Datasources
The error 'RD 155 System could not find a source of data that could perform
the search ' usually means that there is no suitable summarization level for
the CO-PA Account Based Datasource. There has to be one (single)
summarization level that contains all characteristics (except for the
controlling area) with '*' in the characteristics view in transaction KEDV
and has status 'active'.
Afterwards you have to fill this summarization level with transaction KEDU
also check thread COPA Summarization Concept
does that help? -
Errors occured during the Extraction.
Hi Folks,
I've transported Some of the HR data sources to the quality server,But when i check the data for 0HR_PT_2 DS in RSA3,I'm getting the message Errors occured during the Extraction.I checked for the details but nothing was there except Message No.RJ012.
And the same thing was happening for 0JOB_ATTR. In the developement Server 0HR_PT_2 is fine showing 0 records,but the second had the same problem.Hi ,
Look at following points
1. ST22 dump
2. Check whether underline table have any data or not
3. Check the SP level whether it supports these DS
4. cHECK WHether Errors occurred during the extraction, Message nos. RJ012 & R3009 debugging the datasource and see what is exact error.
5. Extraction problem : RSA3 and in BW
Thanks and regards
Kiran -
Errors occurred during the extraction(Generic Extraction)
Hi All,
I am facing problems in solving BW Production issues .
The following are the Problem details.
Actually there are two Datasources connected to BW System One is from R/3 and other is from CRM.
The problem is with Delta Request which has been failed in ODS while uploading Data from R/3 in Background Scheduling but other DataSource is loading perfectly into BW System.
Its a generic extraction created based on View.
When i checked BW Side the error is displaying as follows: Error occurred in the Data Selection.
Error occurred in the Source System.
No Data has been extracted from R/3 into BW.
But when i checked R/3 (Source system)
Firslty i executed RSA7 for checking Delta Records. The records are 0 for the Datasource.
I executed RSA3 with Full UpdateMode, the number of records extracted were displayed
when i checked with Delta Update Mode its giving the following error.
Errors occurred during the extraction
Message no. RJ 012
Diagnosis
There was an error during the extraction phase of the extractor. An exception 'error_passed_to_mess_handler' has been triggered.
Procedure
Check the function module and the call from the extractor check program
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BW. The number of the records received in BW is checked against this information.
Regards,
Chakri
Message was edited by: Chakri
Message was edited by: ChakriHi,
If Idoc are already sent to BW then goto Monitor in BW and in Details tab note the Idoc no in OLTP, and goto R?3 and BD20 tcode and give the Idoc no and execute it.And see the records are came or not in BW.
Thanks
Reddy -
Errors occurred during the extraction - Generic datasource
Hi,
We had created a Generic datasource based on Infoset. While executing RSA3 for that datasource, 'Errors occurred during the extraction' message is getting displayed.
In the Error log, it says, "Field catalog does not agree with the fields of the functional area".
Please let us know on how to resolve this error asap.
Thanks in advance!!!!hi haripriya,
just go to RSO2.
Enter the name of your datsource.
then Click on Delete.
Then Again Recreate your data source with correct structure and definition.
then activate it and replicate it in BW.
hope this will help u.
thanks -
"Errors occurred during the extraction" - COPA datasource using Tcode KEB0
Dear Experts,
I have created a COPA datasource using Transaction code KEB0 .In Operating Concern i gave company code value and i have chosen Account Based radio button and i have created a datasource name like "1_CO_PA_TEST"
i had given the datasource in RSA3.this datasource has a mandatory inputs of Controlling Area & Period/year .i had given the two inputs and tried executing the datasource.i got the error message "Errors occurred during the extraction" "Message no. RJ012"...
Can anyone solve my problem??????????
Thanks in Advance.
Regards,
SVBHi,
Can you check whether the Update mode in RSA3 is Full or Delta. If its delta, you would have to give the value of your BI system in Target system field. If you dont give this value, it would give the error that you received. -
Errors occurred during the extraction in RSA3
Dear Masters,
I have created one generic data source using FM and it's in activate staus in rsa6. When I checked the data in RSA3, it's saying below message
Errors occurred during the extraction
Message no. RJ012
Please help me to resolve this issue.
Thanks a lot in advance
Raja SHello Raja,
I can understand that's not related to your question.Your question has just given the message number and therefore its not possible to make out for anyone by just looking at the message number.
I just wanted to let you know that if you follow the steps as mentioned in the document then chances of error are less and you can compare your code with the document.
All the function modules are based on the same logic and use the same syntax and I am sure yours will be no different other then the tables which you have used.
Did you tried to debug your data source in RSA3 in debug mode??
You will get the exact issue where it is failing.Check the option debug and execute in RSA3
Give the desired inputs and see the values of all the parameters which is getting filled and see after which code you are getting the error.
Thanks
Ajeet -
Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?) -
PLEASE HELP!!
same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
Hi,
I am trying to download the latest 10.0 itunes, however I keep getting this error message. I have a new iphone 4s so when I plugged it into the laptop it said i need to uninstall and reinstall the latest itunes.
I contacted support which they advised me to uninstall the itunes on my dell laptop, which I have done however I keep getting the same error message. "An error occured during the assembly "Microsoft VC80.CRT, version =8.0.50727.4053",type ="win32",publickey Tokens="1fc8b3b9a1e18e3b",process orArchitecture="x86". Please refer to help and support for more information. HRESULT: 0x800736FD.
Please can you advise on what best to do? The laptop is a 32bit windows 7.HRESULT: 0x800736FD.
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736fd, or some other number? (If they're another number, what number are you getting?) -
Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)
Maybe you are looking for
-
My Passport for Mac external Hard drive is not recognized
I recently had to purchase a new MacBook Pro, and when I tried to get files off of my Passport for Mac external hard drive. I get an error stating "The disk you inserted was not readable by this computer." And when I try to initalize, and verify di
-
USB MIDI devices not detected under OS 10.5.2
Leopard's Audio Midi Configuration doesn't detect my Korg microKontrol, Novation Remote Zero SL and my Evolution MK-249C2 MIDI keyboard. Firewire MIDI device is detected (RME fireface 800). Using the "latest" drivers - Novation Automap Universal 2.0.
-
Error code :d0000029 while purchasing Cross court tennis 2 App in lumia
Error code :d0000029 while purchasing Cross court tennis 2 App in lumia , I tried so many times But it is not yet solved. Trial version is working fine, When i tried to buy full game at last movement it is returning error as d0000029
-
Hi Once again, DW is doing its sudden crash act on an innocuous document when carrying out an innocuous select action. Please see the test document at http://www.nottingham.ac.uk/~ntzrlo/rlos/database/test/edit_rlo_tabs.php and hit 'Edit Record'. The
-
I know my network connection is fine and I've checked all the cable connections and my television is set to the correct input, but even though the remote beeps when I hit the button, I see nothing on the screen. The troubleshooting section in the set