Bold 9700 not starting up after email setup update 6.11. Need help with a mac!!!

I installed the official os 6 on my blackberry released by O2 over a month back. Yesterday, I was not able to configure any emails without downloaed the new version of the email setup 6.11. After the install, I was needed to reboot the phone. However, since then the phone is not switching on. That initial page comes with the Blackberry logo and that status bar (which shows completed) but never leaves that page!!
Someone please please help!!!!

I got mine to work by reinstalling OS 6 via the Blackberry Desktop software, but because I restored my backup as well as my old settings for email, my emails are still coming through provided I don't change my passwords as I can't get into settings without being asked to update as well. It means I won't be able to get my exchange emails as we always have to change/verify passwords periodically. The weirdest thing is that I no longer have maps and password keeper....

Similar Messages

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

HT5699 The country I am living in is not on the Apple Contact Support list and I need help with my security questions.

I am currently living in Tunisia but it's not on the Apple Contact Support list. I need help with my security questions which I cannot remember the answers. There is no link to send a reset email. What do I do?

Click here and ask the iTunes Store staff for assistance.
(114040)

I just downloaded an album from itunes and 2 of the tracks will not play at all, they cut off. I need help with this??

I just downloaded an album from itunes and 2 of the tracks will not play at all, they cut off. I need help with this??

Does the track play correctly in Quicktime Player? If it does then it is an iTunes issue. If it doesn't then it is possible the file was not completely downloaded, or is corrupt.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.
If it can be downloaded again, delete the track from iTunes.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.
If it is corrupt and you cannot download it a second time, contact Apple. Contact iTunes Store support staff through the report a problem links in your account history or,
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

HT201210 My Ipod is not starting up after Backup.... Please help

My Ipod touch is not starting up when i did restore. Then i conected to Itunes it shows Ipod recovery mode. Then i clicked restore and update after that it shows that the Ipod can not be restoreed at this time because ipod software update server could not be contacted or is temperory unavailable. Please help.

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

Ipad won't start up after installing an update. Shows itunes icon with cord from the side.

ipad won'tstaart up after installing an update. Shows, itune icon and cord going tothe side. Cant make it do anything else.

That means that you have to restore the de ice using iTunes on a computer. There is nothing else that you can do to fix it now and you cannot back it up now either. Connect the iPad to your computer and launch iTunes and restore the iPad.
IF you don't have a computer, find someone that has one running iTunes or go to an Apple Store and ask them to restore it for you.

IMac won't boot after OSX Intel update crash - Newbie needs help please!

Hi,
at the weekend I updated OSX on my IMac 17 with an Intel update. An error message said that the update could not be installed and that the update was sent to the trash - a restart was requested. Since that shutdown my Mac chimes and gets stuck at the white load screen (hard drive is quiet).
I've tried the following:
Holding Shift key upon boot to initiate Safe Mode - No Joy!
Apple+S to run disk utlity/console - cannot initiate to cmd prompt!
Just as a little background - I'm a recent Apple convert and typical Windows defector. I've seen the light after many years in M**soft environments (I even trained to MCSE) but my Mac OS knowledge is considerably lacking. Let's be honest - so far I haven't had any problems.
Any gentle help would be most appreciated folks - I'm not sure where to start and I want my baby back!
Many thanks.

Same here. I have an iMac 20". It has been upgraded to Leopard and running fine since I purchased it 2 weeks ago. I downloaded the latest OS/X update (100+MB in size) but the installation failed. The system requested a reboot but it has not been able to ever since. It simply keeps beeping with a white screen. I put the Leopard DVD in, held the "C" key, but nothing works. Now I have a system that won't work. From now on, I will shy away from getting the latest update .... I am planning to take it to the apple store

Mini not starting up after auto firmware update

The software update program suggested an upload of a new firmware. The software update concluded and I was advised that the system needed to restart.
The system shutdown but during restart did not progress beyond the apple icon and the little rotating wheel. No amount of reboots have helped. I used firmware restore CD and went through the reboot process but still get the same thing...apple and rotating wheel.
Any ideas before I take it to the store?
D

Welcome to the Apple Discussions!
This will probably solve the problem:
-Search your installation DVD's.
-Insert the disc 1 and sthut down your Mac
-Start your Mac again while holding down the C key
-Now your Mac should boot from the CD, this can take some time.
-After a while you will see a installation screen where you can chose a language.
-Chose English and continue.
-Then click some time's next and agree with the "Software Agreement".
-Open Disk Utility. Top menu bar --> Utilities --> Open Disk Utility.
-Select your hard disk in the list of disks and volumes on the left side
-Go to the First Aid (tab somewhere on the right).
-Click the button to verify the permissions.
-Then Click the button to repair the permissions.
-Click the button to verify the disk.
-Then Click the button to repair the disk.
-Exit the Disk Utility and the installer.
-Restart your Mac
Hopefully this is helpfull or solved your problem. Consider rewarding some points!
Please see the "helpfull" and "solved" button's on top off this message! Apple: Why reward points?

[SOLVED] Amarok not starting up after the latest update

Hi there,
as the title says, my Amarok isn't starting anymore since I did the latest update (from today to 2.4.1-3).
I see my bouncing logo animation on the cursor for a few seconds and after that it just disappears and nothing happens.
Did this happen to anyone else? Any hints what I can do now to fix this?
Thanks in advance!
Last edited by derblub (2011-06-28 22:13:52)

Ok, sorry for that - just thought someone else run into that too - now some details:
[blub ~ ]$ amarok
KGlobal::locale::Warning your global KLocale is being recreated with a valid main component instead of a fake component, this usually means you tried to call i18n related functions before your main component was created. You should not do that since it most likely will not work
amarok: symbol lookup error: /usr/lib/xine/plugins/1.29/xineplug_inp_cdda.so: undefined symbol: xine_get_homedir
unnamed app(4575): Communication problem with "amarok" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.ServiceUnknown" : " "The name org.kde.amarok was not provided by any .service files" "
[blub ~ ]$ sudo amarok
unnamed app(4881): KUniqueApplication: Cannot find the D-Bus session server: "/usr/bin/dbus-launch terminated abnormally with the following error: No protocol specified
Autolaunch error: X11 initialization failed.
unnamed app(4880): KUniqueApplication: Pipe closed unexpectedly.
[blub ~ ]$ kdesu amarok
kdesu(4586) startApp: Daemon not safe (not sgid), not using it.
kdesu(4586)/kdesu (kdelibs) KDESu::PtyProcess::exec: [ /build/src/kdelibs-4.6.3/kdesu/process.cpp : 293 ] Running "/bin/su"
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line "Password: "
kdesu(4586)/kdesu (kdelibs) KDESu::PtyProcess::exec: [ /build/src/kdelibs-4.6.3/kdesu/process.cpp : 293 ] Running "/bin/su"
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line "Password: "
kdesu(4586)/kdesu (kdelibs) KDESu::PtyProcess::WaitSlave: [ /build/src/kdelibs-4.6.3/kdesu/process.cpp : 379 ] Child pid 4593
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line ""
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line "kdesu_stub"
kdesu(4586)/kdesu (kdelibs) KDESu::PtyProcess::exec: [ /build/src/kdelibs-4.6.3/kdesu/process.cpp : 293 ] Running "/bin/su"
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line "Password: "
kdesu(4586)/kdesu (kdelibs) KDESu::PtyProcess::WaitSlave: [ /build/src/kdelibs-4.6.3/kdesu/process.cpp : 379 ] Child pid 4597
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line ""
kdesu(4586)/kdesu (kdelibs) KDESu::SuProcess::ConverseSU: [ /build/src/kdelibs-4.6.3/kdesu/su.cpp : 259 ] Read line "kdesu_stub"
in my .xsession-errors I'm seeing just this - not sure if it's really related
[/usr/bin/nepomukservicestub] '' is not a UTF8 or latin1 string
'' is not a UTF8 or latin1 string
'' is not a UTF8 or latin1 string
[/usr/bin/nepomukservicestub] virtual void Soprano::Server::LocalServer::incomingConnection(quintptr)
[/usr/bin/nepomukservicestub] void Soprano::Server::ServerCorePrivate::addConnection(Soprano::Server::ServerConnection*) New connection. New count: 9
[/usr/bin/nepomukservicestub] Soprano::ODBC::Connection::Connection() Soprano::Server::ServerConnection(0xa692a0)
and
yakuake(1539)/kdeui (KWindowInfo) KWindowInfo::desktop: Pass NET::WMDesktop to KWindowInfo

15"MBP not starting up after battery ran out....help please!

Help! I have a MBP 15 inch 2.33GHZ running Snow leopard, ran silently out of battery for probably 24 hours, now fully recharged but doesn't boot up anymore. After switching on all I get is a light grey screen. Help please.......

Hold Shift Key upon boot
https://discussions.apple.com/docs/DOC-3046
Stick the 10.6 disk in and hold c (or option) boot, use Disk Utiltiy to repair the drive.
https://discussions.apple.com/docs/DOC-3046

Toshiba 3D TV conked off after automatic Software Update!! Need help to get it working like before

Hi there,
I' Using the Toshiba 46TL963G TV since 5 monts, recetly i asked for the **bleep** new software update and I let it install (ofcourse its connected via ethernet cable). After instalment the TV restarted automatically and everything was fine. I could watch TV well and I turned it OFF. and later Next morning When I turned On, it doesn't function anymore!!
How Crap is this TV.. It does the automatic software update and it conks off itself!!!
and the most annoying thing is that I went to this website "http://support.toshiba.com/" to get the support for this TV and when I entered the 8 charachter moderl of my TV , it say, wrong entry. WTF!!!! You dont clain your own product as yours??
Please help me how can I get my TV working fine as before, else I really have to start working on creating a blog "Reason Why one SHOULD not buy TV from TOSHIBA"
- Many thanks
Aravind

Peter, You _know_ that the firmware update crashes the TV. There have been enough reports of this online, and so much of it here on this forum that you cannot have missed it. Users need to resort to auto-flashing the firmware with files that are not publicly available from your site. Could you not at least remove the offending firmware from the list of things the television can automatically download? Aravind, you might try contacting the toshiba support to get them to send you the correct file to put on an USB device to force the TV to launch the update once plugged. Roaming the forums, it seems like this file should be something like "46TL963G_******_INIT_CLEAR.bin". Kellindil

ITunes does not recognise iPhone 3G (version 4.2.1) and need help with how to transfer photos, contacts and/or messages PLEASE??

Can i use wifi to transfer contacts, photos, messages etc- how??

Try this one and see if it helps:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, Sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

New Macbook Pro does not start up after updating...HELP!!!

Hi,
My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
Can somebody please help me?

You should probably post your question in the MacBook Pro discussions:
http://discussions.apple.com/category.jspa?categoryID=190

**New** Need help with your email?

If you’re forgotten your password (it’s so easily done), you need help setting up your email or you’re having problems with your email account please follow the step by step instructions to get help setting up and fixing any email issues you’re having.
Simply answer a few questions about your email account and what you need help with, and we’ll help with the rest.
Each step includes a helpful picture to keep you right.
We’d love to get your feedback on whether this helped you so please post on this board to let us know how you got on.
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

- Go to Settings>iTunes and App Stores and sign out and sign into update/new account.
Note:
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

How can I get WebAS to not start-up after restarting Windows?

I would like to not have my WebAS auto start after I reboot windows.
I found of couple of options in Configuration tool but they did not stop it.
We have a firewall product that I cannot disable (per security policy), but I can terminate it once I get the desktop. However by that time WebAS has started and encounters blocks from firewall, and once this happens, half the time it causes my jcontrol.exe to result in NIETIMEOUT messages and once THAT happens I have to uninstall and reinstall EVERYTHING.
So, how can I configure WebAS to not automatically start-up after rebooting windows? I have searched help.sap.com and looked for options in Visual Admin and Configure tools.

Easier than it seems
Go to Administrative Tools/ Services in Windows.
Change Startup type of the services to Manual.
You can just sort by the 'Log On As' Column
".\SAPServiceJ2E"
or whatever you instance name is. You can always start the service from the MMC console after this.

Bold 9700 not starting up after email setup update 6.11. Need help with a mac!!!

Similar Messages

Maybe you are looking for