Bold the text font in SSPR Portal -"You must answer at least {0} questions to register. "

The self service password reset portal contains the text :
"You must answer at least {0} questions to register. "
I would like to make it appear bold. I  tried using tags like <b> , <strong> but with no effect.
Please post suitable solution for this.

There is no supported way as far I know.
Unsupported way:
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Similar Messages

  • How do you change the text font on the Droid Global Phone

    How do you change the text font on the Droid Global Phone. I would like it to be darker (like bold)

    Hi.  
    Below I have provided you with the steps to change your font settings.
    From the main menu
    Select Settings
    Select Display Settings
    Select Font Style
    You can select from what is available, 
    Or you select [Get Fonts Online] to find something you want.
    Thank you,

  • In Firefox (latest version) on Craigslist the text font is a very funky super bold angular font I can barely read. When using safari it's ok using times. is this a firefox problem?

    In Firefox (latest version) on Craigslist the text font is a very funky super bold angular font I can barely read. When using safari it's ok using times. is this a firefox problem?

    You can do a check for corrupted and duplicate fonts and other font issues:
    *http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
    *http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html

  • How to bold the text in text edit control

    Dear all,
    i am using text edit custom control in module pool.
    i want to bold the text in text edit control.

    Hi.,
    Check this  [Program|http://www.se80.de/ABAP/ZPA_SE80_IC_PROGART.html]
    It may help you to increase font size in text edit control.
    Thanks & Regards,
    Kiran

  • TextEdit - Did the "text" font change recently?

    For some personal music, I take a screen shot of a text edit window (not RTF, just text). TextEdit shows the text in it, ina system font or something, and now it's different. You can really tell in the "9" and lowercase "t". I believe this happened when I upgraded to 10.4.9, but I'm not sure. I can't find any other information about the "text" font that TextEdit uses.
    Any ideas?
    J.

    Sorry, I guess my question should be if the Monaco font changed, or if it was previously something else that looked very similar.
    Thanks.

  • Is there a way to have hardware acceleration without the text font change? + Eye straining firefox!

    Is there a way to have hardware acceleration without the text font change? I remember there was a way to go into settings before and getting hardware acceleration to work without the font change. Unfortunately I lost ALL my previous setting when uninstalling the beta ver Nightly and clicking delete settings :(.
    Also, I fixed a problem before where firefox was visually eye straining to me, I think it was some settings in anti-alias tuner, but I cant seem to find the right settings that puts less strain on my eyes, anyone know? Thanks ahead. Currently using FF7.

    Try to toggle some Boolean gfx.font_rendering prefs on the about:config page to disable some features.<br />
    Filter: gfx
    Others to try:
    * set gfx.direct2d.disabled to true to disable Direct2D
    *Anti-Aliasing Tuner: https://addons.mozilla.org/firefox/addon/anti-aliasing-tuner/

  • The text knock out, how do you get rid of the black backround?

    the text knock out, how do you get rid of the black backround?, ive seen people have the text negative with out the black backround im just not sure how to do it. im running version 10.0.3

    The text in FCP has no black background. You put it on top of whatever you want and the background is transparent.

  • How do i make the text font look similar to that in IE?

    The text font with which i have been working on IE is different from the text font used in Firefox. I would like to change my text font settings to the one similar to IE's.
    == This happened ==
    Every time Firefox opened

    1. Click Start, click Control Panel, click Appearance and Themes, and then click Display.
    2. On the Appearance tab, click Effects.
    3. Click to select the Use the following method to smooth edges of screen fonts check box, and then click ClearType in the list.
    Same as Morbus suggested. Do this and the font in Firefox will instantly change as desired.
    Its now very easy on the eyes, smooth and looks very good as well.

  • The external model has changed. You must relink or refresh before this function can execute.

    Good day!
    I got the following error (code: -2366) when trying to run a executable built from LabVIEW 2013 on a target Windows machine with only LabVIEW run-time 2103 32-bit installed.
    "External Model in VIname.vi/Control & Simulation Loop/VI <append>The external model has changed. You must relink or refresh before this function can execute.The external model has changed. You must relink or refresh before this function can execute." 
    The exe file works fine on the systems with full LabVIEW installed, but not on the ones having only run-time libraries. Dependency walker doesn't help to much. 
    Does anyone know what caused the issue? BTW, the VI needs 3rd-party dlls.
    Thanks for your time and all replies are welcomed.
    Regards,
    Yan

    Hi,
    Thanks for the reply. Actually I have found the problem.
    In my VI, I have Control Design and Simulation Loop, in which I have a VI that call functions from a DLL that I put in LabVIEW resource folder. After building the EXE file from this VI, the DLL file is copied to the data folder.
    But the problem is that when I run the EXE file, I have to make sure the DLL exists not only in the data folder, but also in the LabVIEW resource folder (E:\Program Files (x86)\National Instruments\LabVIEW 2013\resource), meaning when I run the EXE file on another machine with only run-time library installed, I have to manually create the whole path, and copy my DLL in.
    I checked the EXE file and found the following folders, copied DLL to everyone of them, not working either...
    National Instruments\Shared\LabVIEW Run-Time    
    c:\Program Files\National Instruments\Shared\LabVIEW Run-Time  
    %ProgramFiles%\National Instruments\Shared\LabVIEW Run-Time
    SOFTWARE\National Instruments\LabVIEW 
    BTW I am using LabVIEW 2013 patch 2.
    Thanks

  • The application "Droplr" is open. You must quit the application before the installation can begin.

    The application "Droplr" is open. You must quit the application before the installation can begin.

    Look on your dock. Do you see the icon? If it has a light turned on (underneath the icon), then it is still open. Make sure you quit the app.

  • On the Apple webiste, I read that you must run OS 10.6.8 in order to sync the iPhone 5 with the computer. However, in the tech specs on the "Buy the iPhone now" email  I  received at my .me email address, it list the OS sytem needed as 10.5.8. Which is it

    On the Apple website, I read that you must run OS 10.6.8 in order to sync the iPhone 5 with the computer. However, in the tech specs on the "Buy the iPhone now" email I received at my .me email address, it listed the OS sytem needed as 10.5.8. Which is it?

    In Reply to all fellow Apple fans: It is great that someone found a work-around to the iTunes 11.4 no syncing problem. I think that is fine for the short term. And  I am really glad that we customers have a forum to share information and experiences regarding Apple's products. However, as someone here said, we are all customers; and posting a problem here "IN HOPES THAT APPLE READS THESE POSTS" is NOT a way to resolve this issue or any issue.
    PLEASE CONTACT APPLE: Apple Service Center: 1-800-275-2273   - Once you get a ticket number then and only then is this documented and then Apple can follow-through and alert the engineers who will fix this.
    The "CWA2" work-around band-aid does several things in addition to reverting back to iTunes 11.3.1. :
    1) It ensures that Apple continues to know nothing of the problem.
    2) It ensures that the faulty code that is within 11.4 remains there and is perpetuated into future versions.
    3) It ensures that YOU can never upgrade to future versions. (If the resident faulty code remains and perpetuates)
    So once you have reverted back to 11.3.1, the problem APPEARS to have gone away (FOR YOU) but you have not solved the problem.
    Again, respectfully,
    1) Sending feedback to apple (using the "Report Bugs To Apple" menu item in Safari will get the information to someone, somewhere and add it to the pile of issues, complaints, suggestions, etc.
    2) CALLING the Apple service/support Center at  1-800-275-2273 will put you in touch with a real APPLE person who will begin the process of documenting and forwarding this issue on to those who will fix it.
    and
    3) emailing Apple directly will make sure that they get the information.
    lets get this fixed !!!!!!!!!

  • AMT subsystem failure.  The licensing subsystem has failed catastrophically you must reinstall or call customer support.  Which never answers.  I have reinstalled with the same issues not sure whatelse to do?

    this message appear when I launch any program within the CS3 suite
    AMT subsystem failure.  The licensing subsystem has failed catastrophically you must reinstall or call customer support.  I call automated system which refers me to this site.  I have reinstalled with the same issues not sure what else to do?

    Try this Help article
    Error: "The licensing subsystem has failed catastrophically." when you start a Creative Suite 3.x application
    Nancy O.

  • Error: You must have at least 1 Easy Setup File?

    I just upgraded from FCE 1.0.1 to FCE HD v3.0. I have Quicktime 7.4.5 & OS X 10.4.11
    When I launch, it takes forever because it's trying to load all my audio plugins into it and then at the end of that I get this error message:
    Unable to start Final Cut Express HD. You must have at least 1 Easy Setup file. Please re-install Final Cut Express HD and try again.
    Since it takes so long to install and I've already done it twice now...to no avail mind you...I was wondering if a guru or enlightened person would fill me in with what's going on and what I might do about it?

    You may as well get rid of everything as we don't know where the problem lies.
    This says FCE 2 but it is for FCE 1.0.1 as well. Remember many of the FCE 3.0 and FCE 1.0.1 files will be the same/shared.
    http://docs.info.apple.com/article.html?artnum=93690
    When you reinstall, do not install FCE 1.0.1.
    Simply install FCE 3.0 and you will be asked at some point for the FCE 1.0.1 serial number as well.

  • Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional

    Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional

    Hey Sue,
    Considering this error, I would suggest you to please refer the KB doc link given below:
    Error "Acrobat 8 Professional cannot be launched" | CS3
    Hope it helps.
    Regards,
    Anubha

  • Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other Suite component before launching Adobe Acrobat 8 Professional. I do exactly this with not positive result.

    Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other Suite component before launching Adobe Acrobat 8 Professional. I do exactly this with not positive result.

    Hey Sue,
    Considering this error, I would suggest you to please refer the KB doc link given below:
    Error "Acrobat 8 Professional cannot be launched" | CS3
    Hope it helps.
    Regards,
    Anubha

Maybe you are looking for

  • JTree node parsing

    Hi I have a JTree where the which has a list of subnodes( please note that i m adding new functionality to existing java application ) the new functionality must on user click on a node , must do list all files under that node and process those files

  • Port out of range:-1

    Hi , I am trying to create a connection pool on Sun java application server 8.2 and when I ping by clicking on "ping" in the Admin console on Connectionpool creation window, I get following error , I am connecting a sybase server running on port 4100

  • Widescreen full screen?

    This might sound like a stupid question but I thought I'd check! I'm important widescreen footage from a DV cam, into iMovie HD 6. The project is set to be DV Widescreen and the frame rate is set to 25 (because I'm PAL). I import the footage but when

  • Updateable Column attribute

    Hi, I am trying to create a simple report based on a SQL query, something like this, select id, customer_id from master_table where status='open' I changed the column, Customer_id's Updatable Column Attribute to "Display as Text (based on LOV, does n

  • Does it cost to download previously purchased songs/vides from I Phone onto I Pad 3

    does it cost to download previously purchased songs/vides from I Phone onto I Pad 3?