Bold upgrade mac version 2.4.0 (build 16) - now won't sync

Completed routine upgrade. Now bold communicates but during the sync process get error message "an error was encountered while syncing ZERO - try re-sync". I have reloaded software but still same problem. Mac has snow lion.

Snow leopard?
Are you able to sync single part(music,contacts,etrc)?
On mountain lion I found the I had to completely reinstall DM to make it work.

Similar Messages

Failed Upgrade to Version 3.1.2 - iPod Touch now won't restore - HELP !!

I sync'd my iPod touch (2nd Generation) today and decided to upgrade from V3.0 to the V3.1.2
The upgrade was donloaded but somehow failed to load onto the iPod. Saw the message on iTunes "Updating iPod Software" but after about an hour I gave up and reset the iPod and PC. Now I've tried to restore it but I just get the White Apple logo on the screen and a progress bar that's stuck. iTunes still shows "Restoring iPod software". Tried this about 3 times now and ready to give up !!! Any ideas welcome. Thanks. Gav

Having sililar problems with one of my 2 ipod touch.
One set up fine. The other however is stuck at the first step!Picture of the itunes logo and the usb cable.
I did manage to set it up fine and get some music on it. However itunes asked that I update the software for the device. I clicked update and now the ipod is back to the start and stuck in that mode.!!
Help!!

Mac Version 8.0.12 (Build 25282) of Remote Desktop deletes all connection and gateway settings on startup

Hello,
I have a frustrating issue with MRD for Mac Version 8.0.12 (Build 25282). The application was interrupted while updating a few days ago and started throwing errors when I attempted to launch it. I deleted the app using Launchpad and reinstalled via the App
Store. Ever since the initial reinstall (and subsequent ones) the app will pop the "What's New?" version update window (even if I select the "Don't show this again" checkbox) and all of my saved settings are missing.
I would like to clear out all app data and try reinstalling but I can't find where MRD stores data on my system. Any suggestions on how to fix this problem would be much appreciated.
Thanks,
Eric C.

Hi Eric,
Thank you for posting in Windows Server Forum.
So from your description it seems that your remote desktop (MRD) is working fine but facing issue that can’t store the related setting (cache issue). So you can check whether you have any related logs from MAC MRD which give us any light for further research.
Microsoft Remote Desktop>About Microsoft Remote Desktop>Send log via email
Or you can refer this link
for apple support or ask your question to apple support forum.
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
I re-partitioned disk to extened/journaled standard, etc.
Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
But, it has now been in "preparing" mode in Time Machine for HOURS....
What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
Are you trying to make issues with External disks, to drive people to iCloud? That trick ont work in me. I will not reward bad behaviour Apple.
Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

Solved by Pondini, on another thread I opened...
Answer:
Sounds like either:
A directory problem on your internal HD. Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
Something in OSX may be damaged. You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that). See Installing the ''combo'' update and/or Reinstalling OSX.

Error when launching .rdp file from RDWebAccess with RD Gateway "NtlmWebAuthException: 2" on Mac Version 8.0.8 (Build 25010)

When launching a .rdp file that has been download from an rdwebaccess session, the following error is generated "NtlmWebAuthException: 2". I have tested this on the Mac Microsoft Remote Desktop client version 8.0.8 (Build 25010).
The following is the use case:
Download the .RDP file for a published app "notepad.exe", on rdwebaccess (2012R2), accessed through the gateway (2012R2) VIA the connection broker (2012R2) on a RDSH server (2012R2). NLA is enabled everywhere.
This same setup works on Windows using the Remote Desktop Connection client.
I found that if you edit the .rdp file and add the following line (no quotes):
"username:s: "
Then the user is prompted for credentials. You may also set it to be "username:s:domain\username".
This issue here appears that the Mac client is either ignoring the "prompt for credentials on client:i:1" setting, or it is passing blank credentials... or both.
I appreciate all the work the MS team (and iTap) have done on this product... keep up the great work.
Example failing RDP file:
redirectclipboard:i:1
redirectprinters:i:1
redirectcomports:i:0
redirectsmartcards:i:1
devicestoredirect:s:*
drivestoredirect:s:*
redirectdrives:i:1
session bpp:i:32
prompt for credentials on client:i:1
span monitors:i:1
use multimon:i:1
remoteapplicationmode:i:1
server port:i:3389
allow font smoothing:i:1
promptcredentialonce:i:1
videoplaybackmode:i:1
audiocapturemode:i:1
gatewayusagemethod:i:1
gatewayprofileusagemethod:i:1
gatewaycredentialssource:i:0
full address:s:RDCB.COMPANY.COM
alternate shell:s:||Notepad
remoteapplicationprogram:s:||Notepad
gatewayhostname:s:rdgateway.COMPANY.com
remoteapplicationname:s:Notepad
remoteapplicationcmdline:s:
workspace id:s:RDCB.COMPANY.com
use redirection server name:i:1
loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.Notepad
alternate full address:s:RDCB.COMPANY.COM
signscope:s:Full Address,Alternate Full Address,Use Redirection Server Name,Server Port,GatewayHostname,GatewayUsageMethod,GatewayProfileUsageMethod,GatewayCredentialsSource,PromptCredentialOnce,Alternate Shell,RemoteApplicationProgram,RemoteApplicationMode,RemoteApplicationName,RemoteApplicationCmdLine,RedirectDrives,RedirectPrinters,RedirectCOMPorts,RedirectSmartCards,RedirectClipboard,DevicesToRedirect,DrivesToRedirect,LoadBalanceInfo
signature:s:ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB

Hi,
I too have this problem but I am unsure of how you fo about adding the "username:s:domain\username"
into the file as it is downloaded via the RD Web Access page.
I know that I can edit the RDP file after the event and then send it to my users but I don't want the
hassle of doing this,
The weird thing is that ver 8.0.8 release notes say that there is a "Fix for the issues of starting remote connection from RDP files that included gateway information"
Anybody have any ideas?
Thanks,
Jaggie

Fonts are still bolder in Mac version only

I've searched like crazy online, found this happening for some throughout many different versions, but still find no solution.
On the latest version (v23) and a few previous now, we're seeing fonts which are more bold than on any other browser. This includes text and our font icons.
Strangely, and beyond us, we have one guy here on the same FF and OSX versions who does not have this problem. We can't figure out why.
FF on Win does not have this problem.

The hardware acceleration feature can affect font weight. If you toggle it off, does that have any effect?
Firefox menu > Preferences > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
You generally need to restart Firefox for this change to take effect.

Since upgrading to version 10.8.2 my MacBook Pro won't wake from sleep is her anyway I can fix this?

Since upgrading to version 10.8.2 my MacBook Pro (late 2009) won't wake from sleep is her anyway I can fix this?

> during the entirety of this process the cursor was a "busy" pinwheel/beach ball/whathaveyou for a solid 30 minutes before I turned the computer off with the power button.
All that cursor means is that it is busy trying to do something. You can see if force quitting solves the problem with a simple force quit using command-option-escape. If you are having issues with iCal quitting, sometimes it doesn't always know whether or not it is properly communicating with a particular calendar. This can be a Mobileme issue, or even a phone synchronization issue, or a network issue reaching a shared calendar. Shutting down a machine directly from a cursor is the last step one should try, only after all others have failed. If you have done this in the past, lurking corruption can get worse each time with the directory, and upgrading the system will only enhance any corruption already present. When you restart your Mac, does everything appear to be normal?

IPod Touch 4G upgrade to iOS 5 went badly, now won't sync.

iPod Touch 4G upgrade to iOS 5 went badly - backup corrupted. Reset iPod and installed as new device in iTunes 10.5 but would not sync. After many attempts and another reset, it has now synced apps, contacts, and movies but only immediately after a reboot of the iPod. Music won't sync at all. Sync fails silently with no error message or on subsequent attempts reports that sync failed to start.

Did you try to connect to your computer in recovery mode, set your device aup again "as new" and start all over?
How to set up your iPhone or iPod touch as a new device
iOS: Unable to restore

SQL Developer Data Modeler - MAC Version 2.0.0 Build 570 - Issues

In no particular order
- The Help, About box displays a different version information set then the SQL Developer Data Modeler, About SQl Developer Data Modeler.
- Not able to move any portion of the connection between entities. Thus there is no current way to align the lines as wanted.
- There is no way to scroll all the way to the right side if you have more then approximately 5 entities horizontally.
- Open SQl Developer data Modeler, Click on File, Open, select an XML file and a dialog box is displayed.
- The checkbox needs to be moved to the right as it is partially cut off.
- the text next to the checkbox is cutoff and only displays "Don't show this dialog agai".
- Printing Diagrams does not print correctly unless you have the entities displayed such that you can "read" them. If you have diminished the display so that you are not able to see the table or
field names then the Print Diagrams does not display the entity or field names.
- File, Recent Designs, does not retain the last or any design having been opened and/or saved.
- VarChar2 is not a displayed data type for Oracle 10G.
- There does not appear to be a way to create a set of fields which you would like to have added quickly and easily to selected tables.
- DDL Editor displays the Macintosh HD. It should display my User Directory
Thanks,
Lester
[email protected]

Sorry to dredge up an old thread.
I just downloaded data modeler and tried to start, but got an error regarding bad version:
Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version number in .class file
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:675)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:316)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:280)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
I have JRE 1.5, but that seems to be the latest per the Software Udpate utility, and when prompted, I set my java directory to /usr, since my java bin was under /usr/bin.
Let me know if I should start a different thread.
Thanks.
Chi

Upgraded to Version 1.5.0 (build 1.5.0_02-b09) now errors on 2 applications

After downloading the update this morning I am encountering errors on two Cisco device applications. Both were working this morning.
On a PIX PDM I get this when trying to start:
java.security.AccessControlException: access denied (java.util.PropertyPermission java.version read)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
     at java.lang.System.getProperty(Unknown Source)
     at com.cisco.pdm.e.c.q(Unknown Source)
     at com.cisco.pdm.e.c.h(Unknown Source)
     at com.cisco.pdm.a.byte(Unknown Source)
     at com.cisco.pdm.PDMApplet.start(Unknown Source)
     at com.cisco.nm.util.sgz.Env.start(Env.java:37)
     at com.cisco.nm.util.sgz.Loader.start(Loader.java:109)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
I can't seem to find any place to check that access error.
Also on a Cisco ACS server I am unable to access some screens with a Page not available error.
Any suggestions on what to check for would be appreciated.

Hello,
Here's a work around. It requires Microsoft Internet Explorer. This was tested with IE v 6.0.2900.2180:
From the IE Tools Pulldown choose "Internet Options" then the "Advanced" tab.
Find the section called "Java (Sun)" and un-check "Use JRE 1.5...."
Find the section called "Microsoft VM" and make sure "JIT compiler for virtual machine..." is checked.
Restart IE.
I think this causes IE to use the Microsoft Java VM instead of the Sun plugin.
The problem with this workaround is that it forces you to use Internet Explorer.
Someone please post a note when the bug is fixed.
Thanks.
--Tom

Just upgraded to Snow Leopard, but Palm device 4.0 won't sync with it. Any hope?

Can anybody tell me how to make Palm handheld running system 4.2.2 work on the Mac I just upgraded to Snow Leopard?

It would help if you stated what Palm device you are using. I had a Tungsten T3 and then an E2 running perfectly well on Snow Leopard before I gave Palm up, using Desktop 4.2.1 rev.d, so you could give that a try:
http://kb.hpwebos.com/wps/portal/kb/na/tungsten/e2/unlocked/solutions/article/33 219_en.html
or failing that 4.2.1 rev.a
http://kb.hpwebos.com/wps/portal/kb/na/tungsten/e2/unlocked/solutions/article/34 115_en.html
though I can't remember what the difference was.

Mac Mini Core 2 Duo died and now won't boot - any help or advice appreciated...

Hi, all
I have a core 2 duo Mac Mini (possibly a 2008 model?) which has been retro-fitted with a superdrive at some point in its life and was running Lion.
It used to be left running 24/7, but one day I returned to find it powered down and it will not boot up at all now. Applying power and then pressing the power button results in the cpu fan starting, and the HD spinning up - the white power indicator lights steady, but other than that there is no sign of life - no noises, beeps, no display, nothing.
I'm not averse to getting the lid off (I've opened up a fair few mini's before ) so any suggestions as to what my next step should be?
As an aside, the Intel minis have a small push button on the logic board, about half-way down the right hand side - what is this for?
Many thanks in advance for any help and advice you may be able to offer.
O.

Thanks for your reply, mooblie...
I have tried the SMC reset (which, unless I have misunderstood occurs as a result of removing all power for a while then reconnecting the psu and turning on as normal after a few seconds delay) with no luck.
The PRAM reset is a bit of a problem, though, as I do not appear to have any keyboard function - I'm using an aluminium Apple keyboard and mighty mouse (both are the wired variety, plugged into separate USB ports), but the 'boot' process doesn't appear to get far enough to enable operationof the keyboard (shift lock light doesn't light if appropriate key pressed), so I can't give it the 4-finger death grip at power up. The mouse illuminates, and I've tried all 4 USB ports, BTW...
I forgot to add to the previous post that there is 2GB RAM fitted, and both Bluetooth and Airport.
O.

Apple TV and iTunes upgraded, now won't sync

About a month ago, my Apple TV upgraded to 3.0.2, and then required me to update iTunes to 9.2.0.61. The Apple TV continues to work well with the TV. It is also connected to my wireless network and the internet, since it browses the iTunes store and YouTube, as well as connecting to internet radio stations. "About" shows the correct name for the Apple TV, as well as the proper SSID and IP address for my wireless network. BUT...
In iTunes, the Apple TV does not show up in the menu list at the left side of the iTunes window, where you now find "Library", "Store", and the iPod, and where you could formerly find the Apple TV listed.
In iTunes, clicking Edit/Preferences and selecting the Apple TV tab, the list actually does show the Apple TV as connected to iTunes, with the status listed as "syncing". However, the Apple TV has not successfully synced since the upgrade to 3.0.2, as all the content remains as it was before the software update.
On the Apple TV tab, "Look for Apple TVs" is checked and "Prevent Apple TVs from syncing automatically" is unchecked.
Any ideas?

Similiar Issue:
- No longer see Apple TV 1st Generation under iTunes Devices
- No lonfer see Apple TV "tab" under iTunes Preferences
Enviroment
- Apple TV 1st generation
- iMac
Steps
- Updated to iTunes 10.0.1
- Opened iTunes
- Agreed to Terms
- AppleTV is no longer displayed in devices
Troubleshooting
Restarted iMac
- no resolution
Restarted AppleTV
- no resolution
Went to iTunes Preferences; Apple TV "tab" is no longer available in Preferences
- no resolution
Went to AppleTV > Settings > Computers and disconnected computer. Clicked Connect to iTunes and provided digits sucessfully. Closed and reopened iTunes
- no resolution
Note that AppleTV has AirTunes enabled but unfortunately this is not available in iTunes either at this point for streaming music
Currently stumped.
Thoughts?

I added memory to my MacBook Pro (now 4gb) and upgraded to Lion. Now my iphone 4 won't sync-gets stuck at stage 7 of 8 on importing photos. My iphoto is'09 version 8.1.2

I recently added memory to my MacBook Pro so I could upgrade to Lion and use the cloud for my contact list. It's been a bit of a mess, since I use Entourage as my email program. The REAL problem I'm having now is that my iPhone 4 now won't sync. iTunes "quits unexpectedly" at stage 7 (of 8) in the syncing process, where it says it's importing photos. My iPhoto is '09, version 8.1.2 Is this not compatible with Lion?

I have the same problem. I'm suspecting a corrupt photo, but the logs don't give me a clue. Or maybe this version of iTunes needs some further tuning.

Need MAC version of Elements 11 installed windows version.

I installed the windows version of Elements 11 but need the MAC version. What do I do now?

Hi JosephDobrott,
Please find the direct link to install Premiere 11 for Mac: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l .
Kindly follow the very important instructions before download.
Regards,
Romit Sinha

Bold upgrade mac version 2.4.0 (build 16) - now won't sync

Similar Messages

Maybe you are looking for