BOM and routing selection during production order creation

I am having a material which is having only one BOM and one routing. Now for this material in the material master in the selection method indicator i have put as 3 as selection only by production version. But i have not maintained any production versions in the work scheduling view for checking purpose. now when I am creating a production order for this material manually through CO01 system is allowing to create production order. when is the selection is only by production version how system is allowing to create production order when there is no version is maintained.

Hi Kumar,
Looking into scenario as u have maintained,if you have define the selection id and not maintained the production version then it should ask for the production version and show the following
Since the production version is missing, you cannot execute the desired processing step.
As well as pls look into OPL8 ,what Production Version is maintained.
Thanks,
Mohit
Edited by: Mohit Sharma on Feb 4, 2011 5:35 PM

Similar Messages

Alternative bom and routing selection in planned order

hi
how i can config the system so that while creating planned order
system has to select the alteranative SEQUENCE and alternative routing ?
at opl8 we do this for production orders what about the planned oreders
in scheduling parameters of planned orders we can give only selection ID
WHAT about alternative SEQUENCE .
IN the same way how the system selects the alternative BOM with date in planned order
iam not creating production versions
plz suggest
sasikanth

Hi,
If you r using Prod Version then system pick ups the BOM attached in first valid production version.
So, normally put more frequently used BOM in your first Prod Version.
You have more options to use:
- lot size (defined in BOM header)
- production version (several option you have: lot size, manually assign a PV to a planned order)
- you can use explosion date (OPPP, Logistcs > Production > MRP > Master Data > BOM by date)
MRP 4 (in material master) > 'BOM explosion/dependent requirement' tab > you can set selection method according to your wish.
Details:
http://help.sap.com/saphelp_46c/helpdata/en/f4/7d2b1144af11d182b40000e829fbfe/frameset.htm
Regards,
Sankaran

Wrong routing selection in production order creation via MILL_OC

Hi,
We are using the order combination functionality (MILL_OC)
We have a product with alternative routings.
Situation is as follows:
- Create 2 plan orders for the same material
- Execute MILL_OC
When I execute the MILL_OC transaction I get the request to choose the routing. If I select routing with groupcounter 2 for both orders, the combined order is created with routing X /groupcounter 1.
I also tried using production versions but the situation remains
even by forcing to "use always production version" = setting in the material master, I still get routing 1.
It seems the combined order takes always the first routing, Any selection is not possible
Did I miss a setting/customizing or is it a bug?
Any help would be appriciated
Regards
Johan

Hi Ayoub,
All the 4 routings are valid from Oct.2014 to 31.12.9999.
The Order date is from Apr.2015.
I've made another test with 2 routings created with ECN and the order chose one without asking me what to choose. I don't know the criteria used in this functionallity.
Thanks,
Caio.

How to ignore Assembly Scrap of MRP during Production order Creation

Hi All,
We want to ignore the Assembly Scrap maintained in MRP View during production order creation.
We are maintaining assembly Scrap for planning so we do not want to remove that.
Please let us know if any User exit is there during Production Order Creation.
Thanks,
Amit

Dear Amit,
Assume in CO01,once after entering the total order quantity the system proposes the scrap quantity field separately,now
remove this quantity for scrap field and press enter and once again adjust the total quantity and check for what quantity the
system is proposing the BOM components.
check whether this works for your requirement.
Regards
Mangalraj.S

Batch no assigning during production order creation

Sir,
We are manitaining the batch management for inut raw materials. During production order creation it is mandatory to assign the batch no for raw materials then only production order releasing is possible.In our case due to batch assignement to production order while order creation,we are facing the lot of problems like batch no not assign for full req qty and also if unavailabilty of stock for particular batch no it will come to COGI.hereby i need experts help for,
1.I want to determine the batch no during confirmation instead of order creation and also allow to release the production order even batch should be in blank.
Kindly help
Regards,
PS

Hi
For Rawmaterials why cant'n you assign Batch nos buring GR of purchase order.
Then you can do automatic batch determination during confirmation of order for mvrmt type ;261...
This is easy to handle.
Please check and come back
Regards,
srihari

Date of BOM Explosion/Routing in the production order

Dear gurus,
i would like have the Date of BOM Explosion/Routing in the production order same the "Basic start date" .
I setting the value 1 = Basic start DATE in the customizing transaction OPPQ and OPPR but the system calculate this date wrong.
Are the the other setting for this necessity ?
Thanks a lot
Daniele
PP TEAM

Dear Toto,
The standard procedure is that the system first checks whether a BOM explosion number exists for the BOM. If one does exist,
the BOM is exploded using the fixed key date contained in the BOM explosion number. If a BOM explosion number does not exist,
the BOM is exploded with the order start date.
Check the setting in OPPQ for BOM explosion.
Regards
S Mangalraj

Routing cannot be determined during production order creation

Hi,
I am puzzled as to why the system cannot determine the routing data when i create the order against a material. I have confirmed the following that :-
1) Order type refers to the correct routing selection id and routing type, rate routing in this case in OPL8.
2) The rate routing is already created for the validity date with the correct usage and release status.
Please check the screen shots attached :- http://wikisend.com/download/509556/routing.zip
Can someone please help on this peculiar problem

Hi,
Are you using any production version. Check your production versions date range, lot size, also check if your production version is locked.
Also check whether you have assigned the selection ID in OPU3 for the order type.
Also check OPEB setting.
Hope it will help you.
Regards,
Alok Tiwari

Routing selection in Production Order when using ECN in Routing

Hi experts,
I'm having some trouble with routing selection when using ECN in routing creation.
I tested a case where I have 3 routings without ECN, and the Order asked me which one of the 3 I want to use.
Then I created a routing with ECN. The order asked only one routing without ECN and the new routing with ECN.
Do you know if there is any relation about using the ECN in Routings and using at the same time Routings without ECN, when selecting the routing in production order?
Anybody can help?
Thank you,
Caio.

Hi Ayoub,
All the 4 routings are valid from Oct.2014 to 31.12.9999.
The Order date is from Apr.2015.
I've made another test with 2 routings created with ECN and the order chose one without asking me what to choose. I don't know the criteria used in this functionallity.
Thanks,
Caio.

Error during Production Order creation

Hi All,
Our's is MTO scenario. We have maintiain Account Assigment Category as 'M' in Requirement Type. During creation on production order with ref to sales order system gives error "Account assignment cannot be carried out because of different origin no."
If I create the production order with ref to quotation system does not gives any error. But my requirement is to create the prod order with ref to sales order.
Please guide
Regardsd

Hi Bala,
In SPRO goto>Sales and Distribution> Basic Functions-->
Availability Check and Transfer of Requirements
-->
         Transfer of Requirements
-->
             Define Requirements Classes
             Define Requirements Types
-->      Determination Of Requirement Types Using Transaction
Determination Of Requirement Types Using Transaction
In the standard system, requirements types are determined according to a specific search strategy beginning with the material strategy group.
Strategy for Determining the Requirements Type
1. First, an attempt is made to find a requirements type using the strategy group in the material master.
2. If the strategy group has not been maintained, the system will determine it using the MRP group.
3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
Note
You can select an alternative search strategy in the 'Source' field, for example a transaction-related procedure for determining requirements type (source = 1 or 2).
Example
There are business transactions, such as consignment stock processing, in which the material with its planning characteristics is not important, rather the transaction itself. An issue from the customer's consignment stock should not trigger an availability check against planning at the plant as layed down by the planning strategy but rather against special stock.
Actions
1. Assign the item categories and MRP type to the requirements types.
2. Select an alternative search strategy in the 'Source' field if necessary.
By assigning the 1 or 2 to the Source you can have the requirements in MD04 refered to order instead of the initial source document which is usually quotation. If we don't assign this then the system by default refers to the initail document created i.e. Inquiry or Quotation whichever is the first document.
Regards,
Karthik.

Component Availabity Check during production order creation

Hi All,
During production creation, I donu2019t want to include/ check the reserved stock of component (stock which has been assigned for other prod order)
Where I required to make the changes in config.
Regards,
Shailendra

Hi,
Deactivate Include Reservation in T.Code OPJJ. But make it sure you are doing it for correct Checking Rule which you have maintain in your checking Control OPJK for Order Type and Plant Combination.
Regards,
Dhaval

Availability check during production order creation - Missing parts details

Hai Gurus,
I have one problem during Availability check when converting Planned order to production order.
1) A- is the finished material, which has A1 to A7 components.
2) A2 is the procured item with safety stock and it has safety stock also.
3) When sale order is created , the material A2 is reserved against the planned order for finished material - A.
4) so when availability is checked during planned order stage , system says no missing parts, when planned order
     is converted to production order system says missing parts for component A2, which is stock and reserved against
     planned order
5) Checking rule for Production order is maintained as follows,
     a) Include safety stock.
     b) Include reservation.
     c) Include sales requirement
     d) Include deliveries.
     e) Include dependent reservations.(x)
     f) Include production orders.(X)
     g) Check release for stock transport orders only.( A)
So now i don't know where I went wrong , so that the system could consider the safety stock of Component A2 which is in stock and already reserved against planned order and it does not show missing parts when planned order is checked.
Waiting for your positive feed back.
Regards,
Sekar chand

Dear,
What checking rule you have maintained for planned order.???
As what i can understand by your question that you have maintained to check reservation only in production order not in planned order. Or one important thing mostly people configure to reserve material only after release or creation of production order. Are you reserving material at planned order stage.?
Check these things. you will automatically find the answer. Hope it will help you. Revert back for more clarification.
Regards,
Alok Tiwari

Route determination during sales order creation!

Hello all,
I am having a problem with route determination in sales order. The issue is when I remove delivery block (LIFSK) on the sales order and select 'under minimun' in orther reason (AUGRU)field, the route is not getting determined when the partner at the header level is changed.
When if there is a delivery block and other reason is empy, the route is correctly determined when the partner (intermediate consignee) is changed.
Why is it behaving this way? Any siggestions?
Thanks,
Message was edited by:
Naren Somen

Hello all,
Looks like if there is credit block for a customer, the sales order is not getting updated. Is there anyway to get around this?
Thanks,

Withholding Tax Selection during Sales order creation

Hi,
Do we have an option to select or deselect Withholding Tax Codes at the time of Creating Sales order / Billing for the Customer?
As, We get the popup during the time of invoice creation to the vendor.
Your inputs are appreciated.
Thanks & Best Regards
Shashikanth.M

Hi,
Refer the below OSS note:-
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=178824]
Regards,
Gaurav

How BOM and routing is selected for Planned order and Production order?

Hi,
Can any1 plz tell me how BOM and routing is selected for a planned order and production order. ?

Hello Mathisuthan,
BOM and Routing selection for the planned order and production order through production version, If u have more than one BOM and more than one Routing then u can maintain this information as Production Version in the system.
Production version you maintained
MM01/MM02 -- MRP4--- Production version
Or you can create Production Versions in Mass also with Transaction Code "C223"
In the case no production version maintained/created for the material, then system by default will pick the first BOM and routing.
I hope this information helpful to you.
Regards
Umesh Mali

Production order creating without BOM and Routing

create the production orders without bom and routing
they confirm the order
they want to stop confirmation if production without bom and routing
is it possible to set error or warning message
my first doubt is how can we confirm the order without bom and routing
i think it can be solved by production order type
please reply

Hi,
You can make it mandatory by following ways :
Go to OPPQ -> Select your plant-> Go to BOM / Routing Selection in that you need to maintain BOM Sel ID & Routing Sel ID which is having selection ID with usage 1 Production which will make it mandatory to create BOM & ROuting with usage 1 & need to be selected while creation & saving Production ORder.
Also, you can maintain another config. for making routing mandatory at Order type level :
Go to OPL8 -> Select Plant & Order type-> Routing Selection
Maintain 5 Routing/ref. op. set mandatory (manual selection)
or 6 Routing mandatory (automatic selection)
This setting will ensure without routing your order will not be saved.
Hope this helps.
Regards,
Tejas

BOM and routing selection during production order creation

Similar Messages

Maybe you are looking for