BOM changes automated Report

Hi friends
Is there any way that i could get this done (please see below)
For a plant, if any of the BOM has undergone changes. It needs to be captured and mail sent to a user .The list to be sent on daily basis thro mail
Please help with your inputs!
Regards,
KK

Hi,
As per my knowledge, there is no standard report for BOM changes. You need to go for Z-report if you need separate BOM change report then.
However, You can see BOM Changes in -> CS03> Environment ( Menu)--> Change Documents -
It will give you details of all changes made in BOM with date , time & user details everything.
Further if you wish mailing to user these changes you need to develop Workflow Messages. For that you need to contact your Technical Consultant who only can enable you to generate workflow messages for BOM changes.
HOpe this helps.
Regards,
Tejas
Edited by: Tejas Pujara on Aug 18, 2008 11:03 AM

Similar Messages

BOM change track report.

Hello All,
I have a requirement where I need to develop a report that represent following fields of BOM change history.
1. Material (Along with description if possible)
2. Changed By
3. Change On
4. Change Details (Entry, Delete, and replacement data for the item)
5. Header level change (Change in Base quantity, from to lot size, Bom activation/deactivation)
6. Plant (Most Important)
I have checked to get it through CS80 Change Documents for Material BOMm but it'svery lengthy task and can't do it one by one.
I have gone through these tables
STKO --- BOM - header
STPO --- BOM - item
STAS --- BOMs - Item Selection
STPN --- BOMs - follow-up control
STPU --- BOM - sub-item
STZU --- Permanent BOM data
But not getting any clue.
NOTE:- I have not implemented the Change document mgmt system (CC01,CC02) and if I do such so then what about the existing changes already done in the system. So, I know it can be achieved by implementing Change mgmt but practically it's not possible for me.
kindly help!!!!!!!!!
-- Jimmy

Dear Jimmy,
I dont think it's possible to prepare a report using the tables or CS80 for the same,without having Engineering Change
Management.
Check and revert back.
Regards
Mangalraj.S

BOM change history report

I need to do a report for showing the change history of BOM.
Which tables I need to use?
Is it possible to do it?
Best regards,
On

Sundararaja
There is no such table called ATT1 ...

Customized report for BOM changes

Hi PP Gurus,
My client is not having ECM. he want to create one Z report for BOM changes. I checked tables MAST, STKO, STPO, CDPOS and CDHDR. In CDPOS I can see replaced component and replced quantity. But if I deleted any component or inserted any new component I can not see this in any table. Please suggest me how can I track such changes without ECM.
Jayesh Narvankar
SAP PP

Dear ,
You can try to develope a report with the help of you ABAPer with following FM /BAPI :
CSAP_MAT_BOM_MAINTAIN
CSAP_MAT_BOM_OPEN
CSAP_BOM_ITEM_MAINTAIN
CSAP_MAT_BOM_CLOSE
Refer this experts theards on this issues : Deletion of BOM item using BAPI/FM
If you need to go ahead with ECM , you refer our earlier posting in the same issue :
Changes in Production Orders
Regards
JH

BOM Change report

Dear All,
I do have a requirement to develop a report to track the changes in BOM. The report should be in the below format.
Part no Date Remark
Removed from BOM /Added in BOM
Please guide me .
Thanks & Regards,
Deepak

Dear Deepak,
Check the reports
CS80, AUT10
Regards
Madhu

BOM changes report

dear all,
I want bom changes data. if we delete or add any lower level component , if we change qty. it should display old qty as well as new qty and deleted item as well as added item to bom. I have seen CS03.Is there another bapi or function module to trigger bom changes data.
with regards,
Prasadbabu

hi,
For your requirement SAP system should have ECM ( Engineering Change Management )implemented. whenever you change the BOM , new ECM number get generated.So that you can track the changes
Thanks,
SAtish

Change Audit report inquiry

Hi Everyone,
If I just made a new automated action profile under Tools>Change audit and generate a 24 hour change audit report, will it immediately reflect any changes done in the configuration.
Thanks.

The automated actions will take effect immediately and will be triggered based on matching criteria you have defined in the rules and the syslog received from the devices.
Ensure that the Automated Action is enabled for it to take effect:
Select Resource Manager Essentials > Tools > Syslog > Automated Actions, then select action and enable.

BOM change history

Dear all
We are using change number to chang BOM. We want to develop a report for all BOM change history. Is there any function module can use? From table CDPOS is difficult to know what have been changed.
Thanks
Hailiang

Hi,
As others have questioned Why CS80 is not suitable ??
Other possibility would be:
Make a work instruction or mandatory to maintain the description and details of the change in the "BOM Long text".
U can see the long text indicator in BOM,if checked than u will come to know the details.
Caution: Works fine only if everyone follows maintaining the long text for any changes.
Regards,
Prakash

Tracking Production BOM changes in Documents

Hi,
I am a BW consultant and am working on a report that concerns tracking changes to the BOM code in documents. The situation is
The PP BOM is created and basis that procurement and GR is done. However changes to the PP BOM are frequent and cause problems while MIGO. For example on a certain day a material, lets say A, requires 2 qty of material A2 and on another it requires 1 qty of A2. This causes discrepencies in the inventory. So a report that can give a comparison of the actual qty ( as given by the GR doc) and the ideal qty ( as given by the BOM) can help check this.
To the best of my understanding tracking BOM changes on doc level solve the purpose so that one can spot the state of the BOM on the doc level. Is this possible in std R3 system ? If yes, then what are the entities involved ?
Am aware of a functionality called ECM, Engineering Change Management, but am not sure if that will help here.
Thanks in advance.
Saurabh Diwakar

Dear,
The best way to meet your requirements is to activate Engg. change management.
Then you will get track of all changes .
Check in cs03.enter your material, plant and usage. execute it
then click Environment -> change doc -> Full
Also try with transaction CS80,CS81.
ECM and do the necessary seetings in T code OS27 - Set Modifications parameters for BOM's ,OS54 - Engineering Change Management Control Data.
Or,
The best way to do is using Change douments .. Since SAP provided the Change doc mainly for this..
Tables: CDHDR and CDPOS.
Tcode: SCDO. Vendor Master : KRED is the Change doc object.
Regards,
R.Brahmankar

Table for BOM changes

Is there a report that I can run to find all BOM changes for a specific date? Is there a table that I can query that would hold this information?
I would also like to perform the same search for recipies and material master changes.

Hi
YOu can use CS80.
I think you must be aware about the BOM history maintenance which you select at the time of customization.
After you select the indicator please go to the table MKAL and find out the BOM.
It will show you all the changes made in a particular BOM
also you can find the change records in tables CDHDR (Header records), CDPOS (Item records), CDATA (Details)
Material master changes - MM04
Recipe change report - check C260 and C261
regards
Srinivas

Function module required for BOM Changes

Dear SAP Guru
I need the function module which gives me the details of changes done in the BOM.
Scenario: Need to develop the report which gives only the details of BOM changed on the given date. The BOM level might vary.
Regards
Rahul

Dear
I think you should have ECM in place to have tracability for any changes carried out in BOM .
Refer earlier posting : Re: ECM ECR
If the ECM is in place , then you can see what changes has been done in CC02/03 Environmnet - > Reporting -> Bill of Material.
Otherwise please try the following Functinal Module : You can also try CEWB and CS80
1. CSAP_BOM_ITEM_MAINTAIN
2.CS_BOM_EXPL_MAT_V2
3.CHANGEDOCUMENT_READ and CDHDR
Refer : http://help.sap.com/saphelp_40b/helpdata/en/92/58b521417011d189ec0000e81ddfac/content.htm
Regards
JH

CMC Automating Reports Question

Greetings and thanks for taking the time to look this over,
I am looking to automate reports in CMC but cannot find a step-by-step guide to do this successfully. Can anyone provide me with directions? If not, here's the problem:
1: When I import a Crystal report and set it to schedule, with an output of PDF and make that schedule reoccurring - the report does not run. The only reoccurring report that is successfully running is one set to reoccur "now."
Does anyone have any suggestions?
Thanks.

The version reported in the "about" area is: Product: 12.0 © 2007 Business Objects
I am attempting to schedule specific uploaded crystal reports to run on a daily, weekly, or monthly basis. This would seem pretty self explanatory, but somehow it's not working. Here's what I do now:
1: Inside the "Automated Reports" folder, I've created subfolders for the various companies that we report for.
2: I've created various user names for each of those companies. For example: The "Blue Company" folder has a "Blue Company" user name.
3: I upload the Crystal Report in question into the "Blue Company" folder.
4: I go into "properties" for the report.
5: In "default settings", I schedule the recurrence for "Daily" with Days(N) = 1, and the start Date/Time with Today's date and the time at 2:00 AM, with an end date 10 years in the future.
6: I try "Scheduling For" either myself or the username created in step 2.
7: Format is changed to PDF.
8: Destination: Changed to Email. From is set from a company email address. To are other confirmed email addresses. Subject is something like "%SI_NAME%%SI_STARTTIME%" and the Specific Name of something like "%SI_NAME%%SI_STARTTIME%.%EXT%"
9: I then Save the report.
I don't see any other steps to take to force the report schedule to take. If I run these reports "now," they usually run fine, but the recurrence part just refuses to work.
Does this provide you with enough information?

BOM changes for the FERTs during a month.

Hi all ,
I have a requirement from customer BOM changes for the FERTs during a month.
Can anyone help me out the following requirement that i.e. customer requires that we wants to see as output the following fields :
1. Material description.
2. FERT Number
3. Change Number
4. Component Number that has been changed
5. Component Number reason
Please guide me how can this report can be developed with whole scenario by keeping which fields as Input selection and how can logically write it.thanks & Regards,
mani

Hi
Please help me on this requirement
Thanks & Regards,
Mani

Order BOM change type - CC03

Hi,
I'm building a custom report for Order BOM changes like CC03.
Now, I'm stuck with defining the change type. I did debug into CC03 but the logic to build change type is manual and quite complex.
Please let me know how to define the change type.
Thanks,
Khanh

Hi Rav,
That's not what I need.
Please run the Tcode CC03 for a specific change number, then you will see many items inside that change number.
Each item may have a different change type for e.g. NEW, DEL, OLD, Ind, ...
I want to know that kind of change type.
Thanks,
Khanh

Sales BOM Wise Stock report

Dear Gurus,
Good Afternoon!!
My user' requirement is,
he wants a BOM wise stock report.
He will just enter the Header Item, Plant and the storage location,
and system should list all its sub-items with the stock available in that plant & the storage location.
PLease tell me if this is possible.
Thanks & Regards

Hi,
As per my knowledge, don;t have std report for this requirement, but you can customise this, use below tables and let your ABAPer can develop own customised tcode
MAST, STKO, STAS, STPO - BOM table's
MARD, MBEW, MCHB - Stock tables
Regards,
Sankaran

BOM changes automated Report

Similar Messages

Maybe you are looking for