BOM changes inputting the BOM component -reg

Hi Friends,
we would like to know the BOM quantity changes happened for a particular BOm component .
Using CS80 we have to input BOM header to know BOm changes , but our requirement is for a BOM component what changes are made and when they are made .
Our BOM component say a paint part number is used in many BOM headers
it is not possible to see CS80 by inputting one by one BOm header and check whether the BOM component quantity changes are there .
instead we would like to input BOM component and know when and what changes are made to its quantity (menge) in what BOM header by which use
please help
regards,
madhu Kiran

Dear Madhu Kiran,
This is possible only if you are using ECM - Engineering Change number and you can obtain the details
from the tables STAS,STKO,MAST &STPO.
Without ECM I dont think its traceable.
Check & revert back.
Regards
Mangalraj.S

Similar Messages

BOM changes for the FERTs during a month.

Hi all ,
I have a requirement from customer BOM changes for the FERTs during a month.
Can anyone help me out the following requirement that i.e. customer requires that we wants to see as output the following fields :
1. Material description.
2. FERT Number
3. Change Number
4. Component Number that has been changed
5. Component Number reason
Please guide me how can this report can be developed with whole scenario by keeping which fields as Input selection and how can logically write it.thanks & Regards,
mani

Hi
Please help me on this requirement
Thanks & Regards,
Mani

SQVI for BOM header and component -reg

Hi ,
Requirement is we need to download BOM header wise Components for the BOM headers across the plants
As it is of mass and for around 7000 BOM headers we need the details , i have created a SQVI query using MAST , STKO and STPO
but when i execute it in masss inputting the BOM headers results are not correct with errors like repetitions , not matching with CS03 etc...
is there any other effective way for this requirement ?
i need to input the BOM header material and where and all plants they have BOM i need to get the corresponding BOM components
pl suggest soon as it is relevant for year end
Madhu Kiran

Hi ,
Tried with the combination of MAST--STKO-STAS----STPO , still having issues
SQVI results shows combination of soem BOM headers and components which are not yet all linked through BOM , wehn i cross check the result through CS03 , for the BOM header , plant there is no BOM still SQVI shows the records again with repititions
dont know which is missing as earlier i used to feel this SQVI is effective but i think if we use more number of tables we get issues ..
i can not ask for ABAP report development as this is one time activity required for year end things
if some one can share any doc on this please share, as i tried and tired with all combinations
can not use the function module as i need to input materials in mass
pl guide
Madhu kiran

Changing the BOM reference

Hello Everyone,
In our company we have 1000's of material boms e.g. VR935 material bom, if a new grade of material is created but has the same bom we create a new one by create with reference e.g. VR935/1 copy from VR935.
My question is this, can you go into VR935 bom and just change the material e.g. VR935 to VR935/1 the box is greyed out.
I'm sorry if this sounds stupid but my manager is convinced we can do this but I'm sure we can't, because the boms related to whatever material it was originally created for.
Please help me
Regards
Frankie

Not possible, you can't change the header material in BOM,
If you want you can copy the VR935/1 from VR935, and then if you don't want VR935 BOM , then delete the BOM of VR935 by choose delete in the BOM( cs02)

How to see any changes done in BOM through Engineering change management?

Dear experts,
My client need to verify the revision of some assemblies in BOM through ECM.
I tried to verify it by taking some change numbers & executing it in CC03. I am getting the history date & name of person who done the changes. But can not able to see the actual changes.
Could you please tell me how to see the changes done?
Thanks in advance for cooperation & support.
Regards,
Mehul Veni

Dear Mehul Veni,
Assuming you have created a change number through CC01 and made changes in CS02 for a particular BOM by entering this
change number in the input screen in CS02.
Once after making BOM changes,save the data and check in CC03>enter the same change number>menu->environment-
>reporting->Bill of material--->select the change number and click on expand sub-tree and you will get all the required details.
Check and revert
Regards
Mangalraj.S

BOM Change Number

How to make change no mandatory for BOM creation and change?
The required config should not impact any other objects except BOM Creation & Change.

Dear Venkat,
In case of CS01/CS02 to make the change number as mandatory,follow this steps,
1.In OS27 - Check box included for BOM validity maintained,EC Management active,History Requirement.
2.In OS25 - BOM usage 1 & BOM status 1 - History Requirement check box is included.
3.Authorization object C_STUE_NOH is with No.For this you should take the help from your BASIS
consultant,while creating a new role in PFCG for this Authorization object C_STUE_NOH the value must
be set as No.
In most of the cases consultants peform the first 2 step alone,in that case only a warning message is displayed,only if step 3 is
done ,an error message gets displayed and the user cannot enter or make any changes for the BOM without any change
number.
Regards
Mangalraj.S

BOM change history

Dear all
We are using change number to chang BOM. We want to develop a report for all BOM change history. Is there any function module can use? From table CDPOS is difficult to know what have been changed.
Thanks
Hailiang

Hi,
As others have questioned Why CS80 is not suitable ??
Other possibility would be:
Make a work instruction or mandatory to maintain the description and details of the change in the "BOM Long text".
U can see the long text indicator in BOM,if checked than u will come to know the details.
Caution: Works fine only if everyone follows maintaining the long text for any changes.
Regards,
Prakash

Tracking Production BOM changes in Documents

Hi,
I am a BW consultant and am working on a report that concerns tracking changes to the BOM code in documents. The situation is
The PP BOM is created and basis that procurement and GR is done. However changes to the PP BOM are frequent and cause problems while MIGO. For example on a certain day a material, lets say A, requires 2 qty of material A2 and on another it requires 1 qty of A2. This causes discrepencies in the inventory. So a report that can give a comparison of the actual qty ( as given by the GR doc) and the ideal qty ( as given by the BOM) can help check this.
To the best of my understanding tracking BOM changes on doc level solve the purpose so that one can spot the state of the BOM on the doc level. Is this possible in std R3 system ? If yes, then what are the entities involved ?
Am aware of a functionality called ECM, Engineering Change Management, but am not sure if that will help here.
Thanks in advance.
Saurabh Diwakar

Dear,
The best way to meet your requirements is to activate Engg. change management.
Then you will get track of all changes .
Check in cs03.enter your material, plant and usage. execute it
then click Environment -> change doc -> Full
Also try with transaction CS80,CS81.
ECM and do the necessary seetings in T code OS27 - Set Modifications parameters for BOM's ,OS54 - Engineering Change Management Control Data.
Or,
The best way to do is using Change douments .. Since SAP provided the Change doc mainly for this..
Tables: CDHDR and CDPOS.
Tcode: SCDO. Vendor Master : KRED is the Change doc object.
Regards,
R.Brahmankar

Changes visible in BOM although ECM not released yet

Hi,
I have a BOM which has been updated together with a change number. The change number still has status "in work" and not released.
When I go to CS03, with all dates removed on the selection screen, I see the changes in there with the change number. That is ok with me, because then I expect to also see future changes in the BOM.
But when I go into CS03, with today's date in both date fields on the selection screen, I expect to see the old version of the BOM which should still be valid until the ECM is released. Not the changes done by this specific ECM. CS03 shows the BOM with the changes already in, and I think that is not correct. Why should the changes show when the ECM is not released?
Is this behaviour SAP standard or could there be a mistake in the customizing of the ECM status?
Any hint is useful.
Thanks,

Hi,
Though the status is set as "in work", the changes will be effected based on the valid from date maintained in change master CC01. You can practise putting a imaginary future date like 02.10.3333 on the valid from date in change master and when the change to be released change the valid from date as required.
You can also go through alternate date assignment in BOM.
Regards,
jyj9ja

Function module required for BOM Changes

Dear SAP Guru
I need the function module which gives me the details of changes done in the BOM.
Scenario: Need to develop the report which gives only the details of BOM changed on the given date. The BOM level might vary.
Regards
Rahul

Dear
I think you should have ECM in place to have tracability for any changes carried out in BOM .
Refer earlier posting : Re: ECM ECR
If the ECM is in place , then you can see what changes has been done in CC02/03 Environmnet - > Reporting -> Bill of Material.
Otherwise please try the following Functinal Module : You can also try CEWB and CS80
1. CSAP_BOM_ITEM_MAINTAIN
2.CS_BOM_EXPL_MAT_V2
3.CHANGEDOCUMENT_READ and CDHDR
Refer : http://help.sap.com/saphelp_40b/helpdata/en/92/58b521417011d189ec0000e81ddfac/content.htm
Regards
JH

CU50- Channges to the bom by the user will be ignored

Hi, while testing in CU50, After entering the config values, the above message "changes to the bom by the user will be ignored'. how to eliminate the message?

Hi,
In case u have action or procedure dependecies, which are causing a change in the Bom item qtys which were originally defined in Super BOM and are now changing through config values, u will get a message as u said.
As it is a message during simulation process, u can ignore this.
Regards
Venugopal

Uploading the BOM

Hi everyone
I am having a problem in uploading BOM through BDC program.
It is working perfectly and Uploading the BOMs Successfully only the BOMs which are having the Components 18 or less than 18.
If the BOM has 18 or more than 18 components, the control is not going fo rthe further fields....
And it is showing an error message Field RC29P-POSTP(19) does not exist in the screen SAPLCSDI 0140.
Please do the needful....

Hi,
You need to scroll by page down. Not sure whether you have implemented this in your BDC. However it this is a one time activity, just use LSMW BI method for loading the BOM.
Hope this helps.
Regards, Murugesh

Common BOM/Bill to Copy BOM/Bill

Is there any process to Copy a BOM/Bill to same local-Org if its already enabled as Common BOM/Bill.
Here is the detailed steps:
1) BOM/Bill# 800-123 exists Global-Organization.
2) Go to Bills Of Material --> Bills select Org = Global-Org and query 800-123.
3) From Tools --> Create Common Bill --> select local-Og = LO1
4) Switch/Change Org to local-Org=LO1 and you can see BOM/Bill#800-123 as Common BOM here( cant edit but can see/read-only the bill, Header present in local and referring the structure from Global-Org, Bill-sequence-id from Global-org)
5) At this point I want to change copy the BOM/bill to same local-Org = LO1.
6) Go to Bills screen and give this BOM/Bills and click on Tools --> Copy Bill From. It showing error Bill Already exists.
Business reason/Requirement:
During engineering/proto-type they want keep the BOM in Global-org and refer it in local orgs as common BOM. And Once its released for manufacturing, it should be a copy-BOM (complete BOM structure should be available in Local)
Alternate Solution:
1) Delete that Common-BOM/Bill and copy the fresh BOM/Bill from GLO.
2) Custom code to change the bill-sequence-id and copy complete structure to local-Org.
My Question:
Apart from this deleting option or custom-code option, do we have any out of the box solution to convert that common-BOM to actual Copy-BOM ???
Thanks in advance / Praneeth
[email protected]

Look at the OSS note # 161223 and 300296
Thanks
Message was edited by: Saquib Khan

Universal BOM as against other BOM types

Hi,
Can any one tell me what are the benefits inter alia disadvantages of Universal BOM as against Production BOM, Costing BOM or any other BOM types
Please do not send the SAP Help Link as i already have it.
I want something structured please...............
Will be awarded suitably
Thanks in advance
Surya

Hi Suryanarayana,
By means of BOM usage, you can manage separate bills of material for various internal organizational areas (engineering/design, production, costing, and so on).
The main differences in the BOM structure result from the different responsibilities in the various organizational areas, which all process different item data.
Prerequisites
In Customizing for MRP, you have defined a sequence for the possible BOM usages for each plant in the IMG activity Define BOM and routing selection using the BOM selection ID.
Features
The system first searches for a valid BOM or alternative BOM for the BOM usage with the highest priority. If the system does not find a valid BOM or alternative BOM in the selected BOM usage, then the BOM usage with the next-lowest priority is selected. The system then looks for valid BOMs for this BOM usage.
Many companies have only one universally applicable BOM structure for all areas of their company. This structure usually takes the form of complete single-level BOMs, created in the design department, and used in both material management and the assembly workshop.
The R/3 System allows you to maintain individual BOMs for any area of your company. These BOMs are maintained independently of each other and are assigned different internal BOM numbers. In this way, each area is only dealing with the specific data it requires.
In Customizing for Production, define individual BOM usages for the different areas within your company by choosing Basic data ® Bill of Material ® General data ® BOM usage ® Define BOM usages.
You can define BOM usages for the following scenarios:
You maintain separate BOMs for different areas within your company, such as design or production.
You create just one BOM for all areas within your company.
Though you have strictly intimated us to not past any sap link but believe me pls go through it will surely help you.
BOM Catagories
And now the second link is not any help document it having a tonne of information regarding SAP Bom usage and is SDN Thread so I am sure you will go through this one atleast.
[SDN Thread|;
If these information are still not enough pls let me know.
Reagrds,
Shyamal

Bdc code to changing purchase group in the BOM component

Hi We need to change the purchase grroup in the BOM comoponent level for multi level BOM's. Can we use CSAP_BOM_ITEM_MAINTAIN. any body having sample code for this......
Thanks in advance.

Hi,
Did you check standard SAP transaction Mass change BOM CS20 or CEWB for changing the BOM purchasing group.
Check and Revert,
Santosh Sarda

BOM changes inputting the BOM component -reg

Similar Messages

Maybe you are looking for