BOM changes report
dear all,
I want bom changes data. if we delete or add any lower level component , if we change qty. it should display old qty as well as new qty and deleted item as well as added item to bom. I have seen CS03.Is there another bapi or function module to trigger bom changes data.
with regards,
Prasadbabu
hi,
For your requirement SAP system should have ECM ( Engineering Change Management )implemented. whenever you change the BOM , new ECM number get generated.So that you can track the changes
Thanks,
SAtish
Similar Messages
-
Dear All,
I do have a requirement to develop a report to track the changes in BOM. The report should be in the below format.
Part no Date Remark
Removed from BOM /Added in BOM
Please guide me .
Thanks & Regards,
DeepakDear Deepak,
Check the reports
CS80, AUT10
Regards
Madhu -
Hi friends
Is there any way that i could get this done (please see below)
For a plant, if any of the BOM has undergone changes. It needs to be captured and mail sent to a user .The list to be sent on daily basis thro mail
Please help with your inputs!
Regards,
KKHi,
As per my knowledge, there is no standard report for BOM changes. You need to go for Z-report if you need separate BOM change report then.
However, You can see BOM Changes in -> CS03> Environment ( Menu)--> Change Documents -
It will give you details of all changes made in BOM with date , time & user details everything.
Further if you wish mailing to user these changes you need to develop Workflow Messages. For that you need to contact your Technical Consultant who only can enable you to generate workflow messages for BOM changes.
HOpe this helps.
Regards,
Tejas
Edited by: Tejas Pujara on Aug 18, 2008 11:03 AM -
Customized report for BOM changes
Hi PP Gurus,
My client is not having ECM. he want to create one Z report for BOM changes. I checked tables MAST, STKO, STPO, CDPOS and CDHDR. In CDPOS I can see replaced component and replced quantity. But if I deleted any component or inserted any new component I can not see this in any table. Please suggest me how can I track such changes without ECM.
Jayesh Narvankar
SAP PPDear ,
You can try to develope a report with the help of you ABAPer with following FM /BAPI :
CSAP_MAT_BOM_MAINTAIN
CSAP_MAT_BOM_OPEN
CSAP_BOM_ITEM_MAINTAIN
CSAP_MAT_BOM_CLOSE
Refer this experts theards on this issues : Deletion of BOM item using BAPI/FM
If you need to go ahead with ECM , you refer our earlier posting in the same issue :
Changes in Production Orders
Regards
JH -
BOM change track report.
Hello All,
I have a requirement where I need to develop a report that represent following fields of BOM change history.
1. Material (Along with description if possible)
2. Changed By
3. Change On
4. Change Details (Entry, Delete, and replacement data for the item)
5. Header level change (Change in Base quantity, from to lot size, Bom activation/deactivation)
6. Plant (Most Important)
I have checked to get it through CS80 Change Documents for Material BOMm but it'svery lengthy task and can't do it one by one.
I have gone through these tables
STKO --- BOM - header
STPO --- BOM - item
STAS --- BOMs - Item Selection
STPN --- BOMs - follow-up control
STPU --- BOM - sub-item
STZU --- Permanent BOM data
But not getting any clue.
NOTE:- I have not implemented the Change document mgmt system (CC01,CC02) and if I do such so then what about the existing changes already done in the system. So, I know it can be achieved by implementing Change mgmt but practically it's not possible for me.
kindly help!!!!!!!!!
-- JimmyDear Jimmy,
I dont think it's possible to prepare a report using the tables or CS80 for the same,without having Engineering Change
Management.
Check and revert back.
Regards
Mangalraj.S -
Dear all
We are using change number to chang BOM. We want to develop a report for all BOM change history. Is there any function module can use? From table CDPOS is difficult to know what have been changed.
Thanks
HailiangHi,
As others have questioned Why CS80 is not suitable ??
Other possibility would be:
Make a work instruction or mandatory to maintain the description and details of the change in the "BOM Long text".
U can see the long text indicator in BOM,if checked than u will come to know the details.
Caution: Works fine only if everyone follows maintaining the long text for any changes.
Regards,
Prakash -
Tracking Production BOM changes in Documents
Hi,
I am a BW consultant and am working on a report that concerns tracking changes to the BOM code in documents. The situation is
The PP BOM is created and basis that procurement and GR is done. However changes to the PP BOM are frequent and cause problems while MIGO. For example on a certain day a material, lets say A, requires 2 qty of material A2 and on another it requires 1 qty of A2. This causes discrepencies in the inventory. So a report that can give a comparison of the actual qty ( as given by the GR doc) and the ideal qty ( as given by the BOM) can help check this.
To the best of my understanding tracking BOM changes on doc level solve the purpose so that one can spot the state of the BOM on the doc level. Is this possible in std R3 system ? If yes, then what are the entities involved ?
Am aware of a functionality called ECM, Engineering Change Management, but am not sure if that will help here.
Thanks in advance.
Saurabh DiwakarDear,
The best way to meet your requirements is to activate Engg. change management.
Then you will get track of all changes .
Check in cs03.enter your material, plant and usage. execute it
then click Environment -> change doc -> Full
Also try with transaction CS80,CS81.
ECM and do the necessary seetings in T code OS27 - Set Modifications parameters for BOM's ,OS54 - Engineering Change Management Control Data.
Or,
The best way to do is using Change douments .. Since SAP provided the Change doc mainly for this..
Tables: CDHDR and CDPOS.
Tcode: SCDO. Vendor Master : KRED is the Change doc object.
Regards,
R.Brahmankar -
Is there a report that I can run to find all BOM changes for a specific date? Is there a table that I can query that would hold this information?
I would also like to perform the same search for recipies and material master changes.Hi
YOu can use CS80.
I think you must be aware about the BOM history maintenance which you select at the time of customization.
After you select the indicator please go to the table MKAL and find out the BOM.
It will show you all the changes made in a particular BOM
also you can find the change records in tables CDHDR (Header records), CDPOS (Item records), CDATA (Details)
Material master changes - MM04
Recipe change report - check C260 and C261
regards
Srinivas -
Function module required for BOM Changes
Dear SAP Guru
I need the function module which gives me the details of changes done in the BOM.
Scenario: Need to develop the report which gives only the details of BOM changed on the given date. The BOM level might vary.
Regards
RahulDear
I think you should have ECM in place to have tracability for any changes carried out in BOM .
Refer earlier posting : Re: ECM ECR
If the ECM is in place , then you can see what changes has been done in CC02/03 Environmnet - > Reporting -> Bill of Material.
Otherwise please try the following Functinal Module : You can also try CEWB and CS80
1. CSAP_BOM_ITEM_MAINTAIN
2.CS_BOM_EXPL_MAT_V2
3.CHANGEDOCUMENT_READ and CDHDR
Refer : http://help.sap.com/saphelp_40b/helpdata/en/92/58b521417011d189ec0000e81ddfac/content.htm
Regards
JH -
BOM changes for the FERTs during a month.
Hi all ,
I have a requirement from customer BOM changes for the FERTs during a month.
Can anyone help me out the following requirement that i.e. customer requires that we wants to see as output the following fields :
1. Material description.
2. FERT Number
3. Change Number
4. Component Number that has been changed
5. Component Number reason
Please guide me how can this report can be developed with whole scenario by keeping which fields as Input selection and how can logically write it.thanks & Regards,
maniHi
Please help me on this requirement
Thanks & Regards,
Mani -
Hi,
I'm building a custom report for Order BOM changes like CC03.
Now, I'm stuck with defining the change type. I did debug into CC03 but the logic to build change type is manual and quite complex.
Please let me know how to define the change type.
Thanks,
KhanhHi Rav,
That's not what I need.
Please run the Tcode CC03 for a specific change number, then you will see many items inside that change number.
Each item may have a different change type for e.g. NEW, DEL, OLD, Ind, ...
I want to know that kind of change type.
Thanks,
Khanh -
Purchase order price change report
Hello
How to retieve the purchase order price change report ? do we have any standard report for it or any table which gives these data?
kindlHI
Have you activate version management at your end for PO,i think this will help you to track changes of PO for qty,price etc.
[http://wiki.sdn.sap.com/wiki/display/ERPLO/Version+Management]
Regards
Kailas Ugale -
Change report S_ALR_87012168 - 0SAPDUEAN-01
I am in FDI2 for changing report 0SAPDUEAN-01-Due Date Analysis for Open Items. I would like to add one more characteristic in the list available in the right hand side. Currently there are only 26 characteristics available for selection
Hi Suma,
In my last project I worked a lot on that to add new characteristic but I didn't get in clue. If you get any idea that would be great.
Best of luck
Sreenivas -
How to change report displayname at runtime when run from the report server?
hi all,
with the reportviewer widget in a winforms app, i'm able to change report displayname at runtime by handling thesubmittingparametervalues event like so:
private void reportViewer1_SubmittingParameterValues(object sender, ReportParametersEventArgs e)
string po = e.Parameters["Order"].Values[0];
this.reportViewer1.ServerReport.DisplayName = "Load Out - " + po + " - " + DateTime.Now.ToShortDateString();
question: how do i achieve the same thing when the report is run via the ssrs reportserver website?
thanks for any tips,
sffHi sherifffruitfly2,
According to your description, you want to change the display name of report in Report Manager. Right?
In Reporting Services, we can't make the report file name dynamically. But we have Build-in Fields to show report name and execution time in a report. We can add a textbox and put in the expression below:
="Load on- "+Globals!ReportName+" "+Globals!ExecutionTime
It will show the report name with execution time when we run the report:
Reference:
Built-in Collections in Expressions (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
How can I change reports in report painter.
Dear Consultants,
I need to change report according to client requirment.
1, Lay out change in std report.
2, How can I customize report to get cost element group wise with sub totals one by one.
Please tell me how to do it step by step, I'll will award full points.
Kind regards,
Arvey.Dear Arvey,
1. Layout can be changes by going into report painter change transaction GRR2, selecting the report (by double click) and then going to Formatting-->Report layout.
2. Second question is not very clear to me. pls provide more detail.
Regards,
Maybe you are looking for
-
HP LaserJet Pro 200: Scanning to Network Folder on windows server 2012 - can't find folder
I have searched everywhere and tried every suggested solution with no luck. Hence this post. I have an HP Laserjet Pro 200 on our small company network (domain). We use windows server 2012 as our domain controller and as our file and print server
-
I am using Windows XP SP 2. My mother board is ASUS F1A55-MLX Plus, Processor: AMD A4-3400 APU with Radeon HD Graphics 2.70 GHz, 2GB DDR3 DIMM 1333 MHz RAM and 500 GB SATA HDD. I am using FF version 8. However, on some websites I cannot see the whole
-
How do I save an edited clip back to my library?
I've dragged a clip to the timeline, I've edited it by rotating the clip and expanding it's size. I now want to save that edit that I've just done on the clip BACK to my library window. How do I do this? I've tried right-clicking and selecting "Make
-
Can I display an "Organize Bookmarks" menu item in FF 10?
As I recall (albeit perhaps incorrectly), there used to be an "Organize Bookmarks" menu item in FF that is not being displayed in the FF 10 bookmarks menu. Is there a means to display such a menu item? Thanks
-
What happens if a program contains un-necessary imports?
Hi, If a program imports unnecessary classes/packages, will it effect the performance of the program? for example: import java.awt.*; // nothing to do with the classes of java.awt package class Test14 public static void