BOM component should not appear in order confirmation

Hi
In a scenario, I want one of the BOM component should not appear in process order confirmation.
I have not assigned this component to any phase and in material master MRP2 view the backflush tick is not activated.
Still the component is appearing during order confirmation.
Can anyone help in this matter?
Thanks
Pradipta Sahoo

You need to check only at two places to find out the reason
1. In production order (CO02/CO03) in components overview see if backflush indicator is checked.
if it is check you need to look for where it is coming from
a) Material master <<< you already checked
b) Work Center <<< you might have checked this also
c) Components allocation of BOM items to routing operations
2. In OPK4 make sure "All components" is unchecked.
You may have to also note that the production order was created before the backflushing was removed from the above settings.

Similar Messages

Material type for BOM that should not create production order

Hello all,
We have following situation in our company:
We ship few products say for e.g A,B,C which are part of higer level BOM for product M1 to the customer, before the actual product M1 is shipped.Currently these ship-a-head products(A,B,C) is also part of BOM for M1.
We need to combine these ship-a-head products A,B,C as one product M2 (thinking of a BOM) and ship that M2 to customer before M1 is shipped.
In that case what could be the material type for product M2 so that MRP won't create any Production orders for M2.
Also wondering Is there any other way, other than creating a BOM that could combine products A,B and C and ship to customer a-head of time.
Thanks,
Sre

Hi,
Please create BOM for Material M2 by using usage other than production..
1     +     .     .     -     -     -     .     Production
2     .     +     .     -     -     -     .     Engineering/Design
3     .     .     .     .     -     -     .     Universal
4     -     -     .     -     -     +     .     Plant Maintenance
5     .     .     +     +     -     -     .     Sales and Distribution
6     .     .     +     .     -     -     .     Costing
7     .     -     .     .     -     -     -     Empties
8     -     .     -     -     -     -     -     Stability Study
M     .     .     .     .     -     .     .     External Munitions Display
hope it may help you.
Kuber

Condion Type "VPRS" should not appear in Sales Order, Inquiry, Contract

Hi Gurus,
Normally when you create Sales Order/Inquiry/Contract, in the Condition Tab VPRS Condition Type will appear and show the cost price of Materail from the Material Master.
My Client requirement is, VPRS Condition type has to be calculated as "Statistical" Contion but IT SHOULD NOT APPEAR IN THE CONDITIONS TAB IN THE SALES ORDER/INQUIRY/CONTRACT.
Thanks,
Bala

hello, friend.
try sapnote 105621. this is about restricting view of condition types (i.e. vprs) in sales orders by creating anauthorization object for cond types..
i wish to discuss our experience with this, as we had the same business requirement.
first, we simply deleted vprs from the PP. this did not affect financial accounting, until the client decided to implement std cost estimates. we had to bring back vprs.
now, we did the sapnote, which required joint efforts among SD, ABAP and BASIS. although we were able to restrict view of vprs in the cond tabs at itm level, this was still visible at header level. also, a resourceful data encoder can always find ways to view the same in, for example, the document flow or materials movement data.
however, try this and maybe you will get it right.
regards.

Edu Version does not appear in order history

Hello,
I'm Stephanie and I ordered the educational version of the creative cloud for students, but it does not appear in my order history or somewhere else.
I don't have uploaded any proof of my educational status as a student, could this be the problem? I tried, but I don't have an order number.
please help me
Yours Sincerly
Stephanie
P.S.
there also came no confirmation email for the purchase, just the verify email for the email adress

Hello Ankit,
I placed my order yesterday on www.adobe.com <http://www.adobe.com> , I assume that my credit card isn’t charged yet.
Could it be possible that my order didn’t gone thru?
Yours Sincerely
Stephanie
Von: Ankit Khurana [email protected]
Gesendet: Dienstag, 4. Juni 2013 20:23
An: Virusmood
Betreff: Edu Version does not appear in order history
Re: Edu Version does not appear in order history
created by Ankit Khurana <http://forums.adobe.com/people/Ankkhura%40adobe.com> in Adobe Creative Cloud - View the full discussion <http://forums.adobe.com/message/5378898#5378898

With out goods issue for order system should not allow for order confirmati

Dear all
with out goods issue system should not allow for order/operation confirmation.
how it is possible.
Regrads
Srinivas

Dear ,
In some cases we required to do confirmation or TECO without GI .
We can change it as per req using user exit
Regards,
Ishwar

BOM editing should not be allowed while creating P.O./ Scheduling agreement

BOM editing should not be allowed while creating P.O. / Scheduling agreement

Hi,
I think that when you create a subcontracting PO it READS the valid BOM, so there's no locking. From a business point of view you need to question such a requirement, since in SAP you can have many kinds and types of BOMs. Then what if one of the BOMs is open in change mode (edited) exactly when you try to create the order? It should not allow you to create the order? Why?
Regards,
Mario

Credit block should not prevent service order creation

An upgrade from 4.7 to ECC6, without any changes made to the configuration or program change, has lead to the following issue. ECC6 is not creating a service order connected to a sales order, when the customer has exceeded the credit limit. The sales order of custom order type is getting saved with a warning message that credit limit has exceeded. However, earlier in 4.7, the message would not stop creating subsequent service order. What could be different, that prevent ECC6 environment to hold on to service order creation? A subsequent release of the credit block through VKM1 however triggers the service order being created.

Are you using credit card processing in SAP to get the authorization?
If you are then the authorization should not block the order.
Or are you using credit card as a form of payment (without authorization) in which case this needs to be put on the customers account as a payment and then the order entered.
Where are you holding the credit card details?

Rejected items of RFQ should not appear in PO

Dear Friends,
In a given RFQ i will select/ reject some items but while processing PO with Reference to RFQ system should display only selected RFQ items (RFQ items which have rejection indicator should not appear in PO).
validation has been kept for RFQ rejection items should not be converted to PO, but user has to delete the rejected line items manually which is time consuming.
please suggest how to proceed.
Thanks
dmt

Hi,
In ME21N, you receive message 06 050 - "Purchase requisition & item & already deleted". This message can be changed to an error message via IMG transaction OME0. The checks for the messages can only take place,
after adopting all positions (as well deleted ones).
To prevent this, please check to see if one of the following will help:
1) Select the checkbox 'Open only' on the selection screen for the overview. In this case, the deleted items will not appear on
the overview and therefore they cannot be adopted. Or,
2) If you do not want to have the purchase requisitions with deleted items selected in ME21N, you can use the field "deletion indicator" in the variant for your purchase requisitions, by excluding it in   the dynamic selections.
P.S. If you have maintained message 06 050 as E (error), the user will not able to save the PO (he can only hold it)
Regards,
Mauro

TS3322 Photos do not appear in order on apple tv

Synced photos do not appear in order when viewed on apple tv. Shuffle is turned off, have downloaded photos from 2 cameras on computer & saves them in folder, renamed them so they are in correct order but when viewed on apple tv they are not in correct order. Have tried renaming them numerous times & they are not in correct order.

This used to work properly till Nov 2012.
After I upgraded to Ios 6.0.1, this has stopped working

Title should not appear in Ship to Address in SAP SCRIPT

Hi all,
          Title Information should not appear in Ship to Address in SAP Script.
help me , what are the commands to be used in ADDRESS-ENDADDRESS.
Regards
R.Ragu

Thats why I am asking you to not to print that PO tile field. Instead keep some dummy variable that does not have any value.
/:           ADDRESS PARAGRAPH AS
/:             TITLE    &LFA1-ANRED&
/:             NAME     &LFA1-NAME1&, &LFA1-NAME2&, &LFA1-NAME3&, &LFA1-NAME4&
/:             STREET   &LFA1-STRAS&
/:             POBOX    &LFA1-PFACH& CODE &LFA1-PSTL2&
/:             CITY     &LFA1-ORT01&, &LFA1-ORT02&
/:             POSTCODE &LFA1-PSTLZ&
/:             COUNTRY &LFA1-LAND1&
/:             REGION   &LFA1-REGIO&
/:             FROMCOUNTRY &T001-LAND1&
/:           ENDADDRESS
in the above LFA1-ANRED will have some value right . so replace it with some other variable say v_dummy.
Reward points if useful.
Regards.
Nageswar

System should Not copy sales order header text

Hi all,
My requirement is system should not copy sales order header text while copying sales order to sales order with same order type.
for example i have order type OR - standard type with 500 line items with reference to that same sales order we are creating another order with same line 500 line items,but requirement is system should not copy source document header text in to target document header text,
Do you have any standard functionality to avoid this or we need to go exit
Regards
Nishad

Hi,
You can do it via standard SAP configuration.
Transaction VOTXN.
In the access sequence you have the corresponding Text ID added with "Text Object" VBBK. That's the reason why you are copying text.
Change the entry.
Check below link on how exactly to do that. This doc says about how to copy customer text to the sales order. But procedure is same for you as well. Just the object is different.
[Text type config|http://learnsaptips.blogspot.com/2010/09/text-type-configuration-in-sap.html]
Hope it helps!
Best regards,
Rahal

ERROR: floating-point constants should not appear

ERROR: floating-point constants should not appear
Error preverifying class KGUI.KLabel
com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
Build failed
I get this error after adding this code to my application:
     private int C=0;
     private float D=0.0f;
     private int H=0;
     private float store=0.0f;
     private int pos=0;
     private int SH=0;
..................some code.....................
     H=1+ROWS*(f1.getHeight());
     if(H/kawalki.length>0){
          C=H/kawalki.length;
          D=kawalki.length/(H%kawalki.length);
          SH=C;
          if(D>=0.5f)
               SH++;
     }else{
          SH=1;
          D=kawalki.length/(H%kawalki.length);
.................some code..............
protected void keyPressed(int keyCode){
int game=getGameAction(keyCode);
switch(game){
case UP:
if (line>0){
line--;
               pos-=C;
               store-=D;
               if(store<0.0f){
                    pos--;
                    store=1.0f+store;
repaint();
break;
case DOWN:
if(line+ROWS<kawalki.length){
               line++;
               pos+=C;
               store+=D;
               if(store>=1.0f){
                    pos++;
                    store--;
repaint();
break;
Can anybody help me quick?

If the platform is CLDC 1.1 you can have floats. Run preverify to see the options. The cldc1.1 preverifier seems to have options to allow rejecting floats/doubles but the default seems to be to allow them.
Usage: preverify [options] classnames|dirnames ...
where options include:
-classpath <directories separated by ';'>
Directories in which to look for classes
-d <directory> Directory in which output is written (default is ./output/)
-cldc1.0 Checks for existence of language features prohibited
by CLDC 1.0 (native methods, floating point and finalizers)
-nofinalize No finalizers allowed
-nonative No native methods allowed
-nofp No floating point operations allowed
@<filename> Read command line arguments from a text file
Command line arguments must all be on a single line
Directory names must be enclosed in double quotes (")

"floating point constants should not appear"

when i compile my midlet using CLDC 1.0 the preverifier returns the error "floating point constants should not appear".. build failed.
does this mean i can't assign decimal numbers to variables?

Correct, those byte codes are not available on a CLDC 1.0 JVM. You have to use a CLDC 1.1 JVM.

ERROR: native methods should not appear

Excuse me,when I bulid my project with java wireless toolkit 2.5 encounter a problem:
ERROR: native methods should not appear
Error preverifying class javax.microedition.location.LandmarkStore
Build failed
SmartLee

Im too having the same problem while accessing Samsung backlight api in my code...
Can anyone could help in this regard....
thanks

Who know this bug "ERROR: floating-point constants should not appear"

anyone know how to solve this bug
ERROR: floating-point constants should not appear
Error preverifying class org.javabluetooth.stack.BluetoothStack
com.sun.kvem.ktools.ExecutionException: Preverifier returned 1

HI,
it seems that ur using the package "org.javabluetooth.stack.BluetoothStack" in WTK1.0 or 2.0 which does not support floating point. The above package uses float data type. You can download the new version of WTK (2.1) which supports floating points.

BOM component should not appear in order confirmation

Similar Messages

Maybe you are looking for