BOM component sizes are getting doubled?Pls help?

Dear Gurus,
While creating PO with item cat "L"...In delivery schedule tab, I m selecting the delivery schedule for 79 47 grid value size, and clicking on "object list" to enter bom components.
After entering the components, I am going back to the PO and again clicking on "object list" to check once again.
This, time the units are multiplied...strange behaviour of the system....
Can anybody help me out to sort this issue?
Thanks...

thanks...

Similar Messages

Cube level keyfigure valuse are getting doubled?

Hi,
DSO level i am getting correct values but in cube level keyfigure valuse are getting doubled?
can you please advice me,

Hi,
In DSO, Its always in overwrite mode, but in infocube it is in aggregation, so it sums up all the kefigures.
Check if you have two full request in your infocube. If so please delete one, it solves your problem.
Hope it helps.
Thank you,
Prem

BOM component Qty is getting rounded to next value in Process Order and BOM

We are in ECC 6.0, and maintaining BOM where Item quantities are decimal places e.g 0.3lb with respect to Hader qty. Now when we are craeting process order or exploding in CS11, we are seein that item quantities are getting rounded to next full integer e.g 1, 2 or 3.
What could be the reason for this behaviour.

In standard "lb' doesn't have decimal point
If you want decimal point
go to CUNI
select the mass
you can find the lb
maintain the decimal point as 3, & decimal point rounding as as 3, system will show 3 decimal point in process order and in CS11

Hi, my mac book pro, spotlight indexing process not compleate last 1 week. what should i do.. my machine speed are very poor. pls help

hi, my mac book pro, spotlight indexing process not compleate last 1 week. what should i do.. my machine speed are very poor. pls help

System Preference/Spotlight/Privacy
drag your disk into the list, excluding it temproraily from the indexing procedure.
Restart your mac, and open the Privacy page again, click the disk and the minus button to re-incorporate it into the procedure and restart the indexing.
Or just try your luck in Disk Utility/First Aid/Repair Disk Permission first.
See if these help

The apps that are downloaded from itunes store are not getting installed pls help

I am currently using the latest version of itunes. And i am using an iphone 3g ios 4.2.1 version. And whenever i am downloading any of the free application from itunes store from my pc the application is getting download properly and when i try installing it on my phone it gets installed but after installing there is a process of finishing sync when that appears the mark from that application disappears on its own and the app is not installed on the phone.
Please help me
Thank you

Oooft thanks for rapid responce!! It is same account as purchased app, defo compatible (3 of them used to be on ipod then disappeared) and this is only computer I've ever used with ipod. I also did a software update just incase and tried dragging and dropping them into device but it won't let me!!!!! I will try the restictions thingy!

EIGRP MTU Size Causing Neighbor Flap - Pls help!

I've been reading the post here which is quite good but, I have some outstanding questions I hope someone can help me with?
https://learningnetwork.cisco.com/thread/43100#233367
Essentially, we have a DCI which is an evpl link - layer 2. The evpl connection is terminated with a Cisco 3925 at each location (once it comes out of the provider's Ciena box). It is a dot1g tagged trunk - L2 connection. We are running EIGRP between the two. Before setting up OTV, all link sizes were 1500 MTU...which obviously will not work with OTV....and it didnt!. OTV is running on 7Ks a few hops away from each 3925. So, I went on each and every link - (pain stakingly) and configured MTU size for 9216 - enabling jumboframes at the system level too where applicable. What do you know, OTV started working and i could ping to at least up to 2000 bytes with DF-bit set too! (I didn't try any higher).
Last night, our provider did some 'maintenance' without telling us - which brought the link down. The link was 'down' even after the maintenace was completed. After looking in the logs and seeing this, I suspected it had to do with MTU sizes after quickly googling around.
May 13 12:33:13.698: %DUAL-5-NBRCHANGE: EIGRP-IPv4 10: Neighbor 198.28.132.30 (GigabitEthernet0/0.2) is down: Interface PEER-TERMINATION received
May 13 12:33:13.976: %DUAL-5-NBRCHANGE: EIGRP-IPv4 10: Neighbor 198.28.132.30 (GigabitEthernet0/0.2) is up: new adjacency
May 13 12:33:24.266: %SYS-5-CONFIG_I: Configured from console by izzi on vty0 (10.241.6.12)
May 13 12:34:00.286: %DUAL-5-NBRCHANGE: EIGRP-IPv4 10: Neighbor 198.28.132.30 (GigabitEthernet0/0.2) is down: Interface PEER-TERMINATION received
May 13 12:34:00.616: %DUAL-5-NBRCHANGE: EIGRP-IPv4 10: Neighbor 198.28.132.30 (GigabitEthernet0/0.2) is up: new adjacency
May 13 12:34:46.922: %DUAL-5-NBRCHANGE: EIGRP-IPv4 10: Neighbor 198.28.132.30 (GigabitEthernet0/0.2) is down: Interface PEER-TERMINATION received
May 13 12:34:47.280: %DUAL-5-NBRCHANGE: EIGRP-IPv4 10: Neighbor 198.28.132.30 (GigabitEthernet0/0.2) is up: new adjacency
May 13 12:35:37.364: %DUAL-5-NBRCHANGE: EIGRP-IPv4 10: Neighbor 198.28.132.30 (GigabitEthernet0/0.2) is down: holding time expired
May 13 12:37:29.725: %SYS-5-CONFIG_I: Configured from console by izzi on vty0 (10.241.6.12)
May 13 12:37:47.430: %DUAL-5-NBRCHANGE: EIGRP-IPv4 10: Neighbor 198.28.132.30 (GigabitEthernet0/0.2) is up: new adjacency
May 13 12:39:01.508: %SYS-5-CONFIG_I: Configured from console by izzi on vty0 (10.241.6.12)
May 13 12:39:11.943: %DUAL-5-NBRCHANGE: EIGRP-IPv4 10: Neighbor 198.28.132.30 (GigabitEthernet0/0.2) is down: Interface PEER-TERMINATION received
May 13 12:39:13.973: %DUAL-5-NBRCHANGE: EIGRP-IPv4 10: Neighbor 198.28.132.30 (GigabitEthernet0/0.2) is up: new adjacency
So, I reduced the MTU size back to 1500 and low and behold, adjacency stayed. Let me also say that there weren't any errors on the links too. So, I decided to try and increase the MTU back up to 9216 - OTV started working again and adjancey held - it didnt flap. I thought for a second and decided to bounce the link. Once i did this, EIGRP started flapping again with the same exact behavior. After calling the provider, they claim that their max MTU is only 1522 for our EVPL link. I don't see this being possible since I was able to ping DF-BIT set way above 1522. Maybe I'm missing something. We are going to coordinate with them to increase the MTU size on the link. But why/how did it work to begin with - especially since OTV doesn't support fragmenation....I understand that OTV adjacency can still form since ISIS only needs 14xx something...but I wasn't able to get certain protocals/services like esxi host management to work via OTV until i increased MTU size.
Also, after reading the above article it sounds like EIGRP will 'peer' or decide on MTU of it's update packets? If that's the case, maybe the bouncing of the link allowed EIGRP to negotiate it's packet sizes to above 1500 and that's why if I change the MTU size to above 1500 everything works fine - OTV/2000 byte bf-bit set ping, until I bounce the link? If this is the case, is there anyway to 'force' EIGRP to use 1500 for it's packets for its protocol traffic and allow everything else to use the MTU set on the link?
I would appreciate any help explaining this - hopefully you're not as confused as I was after reading it again!

Did you ever find the root cause and this solution for this? We are experiencing the same issues with our 2 4500 Catalyst and a couple of routers on our inter routing VLAN that we use for only the 2 chassis and a couple of router. MTU is already set at 1500 on the 2 chassis.
005326: Jan 19 11:30:02: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 65001: Neighbor 10.190.254.21 (Vlan990) is down: Peer goodbye received
005327: Jan 19 11:30:05: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 65001: Neighbor 10.190.254.1 (Vlan990) is up: new adjacency
005328: Jan 19 11:30:05: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 65001: Neighbor 10.190.254.21 (Vlan990) is up: new adjacency
005329: Jan 19 11:30:07: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 65001: Neighbor 10.190.254.12 (Vlan990) is down: holding time expired
005330: Jan 19 11:30:27: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 65001: Neighbor 10.190.254.21 (Vlan990) is down: Peer goodbye received
005331: Jan 19 11:30:28: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 65001: Neighbor 10.190.254.11 (Vlan990) is down: Peer goodbye received
005332: Jan 19 11:30:28: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 65001: Neighbor 10.190.254.1 (Vlan990) is down: Peer goodbye received
005333: Jan 19 11:30:30: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 65001: Neighbor 10.190.254.12 (Vlan990) is up: new adjacency
005334: Jan 19 11:30:30: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 65001: Neighbor 10.190.254.11 (Vlan990) is up: new adjacency
005335: Jan 19 11:30:30: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 65001: Neighbor 10.190.254.1 (Vlan990) is up: new adjacency
005336: Jan 19 11:30:32: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 65001: Neighbor 10.190.254.21 (Vlan990) is up: new adjacency

Tut i follwed that I cant get right - pls help

I have followed a tut from
http://www.flash-game-design.com/flash-tutorials/rotatingGallery-flash-tutorial.html
I followed it to the T but to no avail - I have played and
adjusted - tweaked and now I am at a loss? went I play it - the
thumbnails are not clickable and they do not rotate? they have not
specified as to where to load the action script? if anyone has
mastered this tut pls can you assist? or if you have masted
something similar? thanking you in advance!

I have tried what you have suggested - i then also redid the
entire tut, i have checked the names and the code at least 20
times, if I paste the code above the maintimeline in its own
timeline - i get no errors but the animation also does not work at
all.
if i paste the code in any other timeline i get the following
error.
**Error** Symbol=gallery, layer=thumbs, frame=1, Line 1:
Statement must appear within on/onClipEvent handler
stop();
**Error** Symbol=gallery, layer=thumbs, frame=1, Line 2:
Statement must appear within on/onClipEvent handler
imageTotal = 8;
**Error** Symbol=gallery, layer=thumbs, frame=1, Line 3:
Statement must appear within on/onClipEvent handler
pauseGallery = false;
**Error** Symbol=gallery, layer=thumbs, frame=1, Line 5:
Statement must appear within on/onClipEvent handler
var current:MovieClip;
**Error** Symbol=gallery, layer=thumbs, frame=1, Line 6:
Statement must appear within on/onClipEvent handler
for (var i = 0; i<imageTotal; i++) {
**Error** Symbol=gallery, layer=thumbs, frame=1, Line 21:
Statement must appear within on/onClipEvent handler
current = gallery.imageHolder.attachMovie("image0",
"image0", 1000);
**Error** Symbol=gallery, layer=thumbs, frame=1, Line 22:
Statement must appear within on/onClipEvent handler
this.onEnterFrame = function() {
Total ActionScript Errors: 7, Reported Errors: 7
I am now at a loss???

My mac will not connect to Internet. Our iPad, pc and iPhones are connecting. Pls help!

My Mac will not connect to Internet,but our iPad,iPhones, and pc are working.

Try these instructions, they seem to be working for quite a few folks. If you aren't following the written instructions watch the YouTube video too.
Lion Wi-Fi problems fix & WiFi Lion Fix on YouTube.
When done please report back with the results you got, that could help others down the road.

Getting Double values in Purchasing cube

hi experts,
I m getting double values for 0po_items and ocontr_item in purchasing data cube 0pur_c01.
i have also applied the test rule in routine ,that values are fine.
but in cube values are getting double.
please help..........

Hi,
It seems like you are loading data into cube using 2 DataSource and there is no (consolidated) dso in between.
If the KF say (qty) you are mapping from both the datasource to the cube, it is going to be doubled in report as 2 records will be found in cube.
I suggest try to load a single valid record (PO and lien item) one by one into the cube and do check the values in cube for each process. You will get good idea how cube behave while loading data from diff. sources.
Also try to bring in the one dso where you consolidate the data as per report requirement and then move that data into Cube, will give you required output.
Thank-You.
Vinod

solved pls help needed in creating template

hi frs
i have created a template need some modification to be done my xml output looks like below
off            hours              q1           q2          q3         avg
aaa          10                    1            2            3            2
bbb          20                    2            4             0           3i have done everything but my doubt is while creating avg
to get average i used the following code
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 3?> i have used div 3 but my requirement is like if any thing is 0 for ex if q1= 2 and q2=4 and q3=0 then my formula for avg is like below
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 2?> like wise if we have values like q1=1 ,q2=0 ,q3=0
then
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 1?>how to get it.
pls help.
thanks
basa
Message was edited by:
Badsha
Message was edited by:
Badsha
Message was edited by:
Badsha

Hi,
I dont know the solution for this, but heres a work arround
//create new label some where else in the excel sheet as shown below
Label lblcmbdata;
for(int i=0; i<1000; i++)
             lblcmbdata = new Label(75, i, (i+1)+" satish", format);
             sheet1.addCell(lblcmbdata);
}//set the validation range as shown below
writableCellFeature.setDataValidationRange(75,0,75,1000);
Label cmb = null;
cmb = new Label(0, 1, "Select",format);
cmb.setCellFeatures(writableCellFeature);
sheet.addCell(cmb);this will create a combo list with 1000 values
also you can keep the data to be populated in the different sheet in same workbook by creating a named range as below
workbook.addNameArea("cmbdata", sheet1, 0, 0, 0, 1000);
// then fill the data in sheet1
Label lblcmbdata;
for(int i=0; i<1000; i++)
                lblcmbdata = new Label(0, i, (i+1)+" satish", format);
                sheet1.addCell(lblcmbdata);
//set the validation named range as below
writableCellFeature.setDataValidationRange("cmbdata");
Label cmb = null;
cmb = new Label(0, 1, "Select",format);
cmb.setCellFeatures(writableCellFeature);
sheet.addCell(cmb);Thanks and Regards
Satish

How can read BOM component date before save the production order??

Hi Experts,
In our company, we need to develop a program to read the BOM component data of the production order
before we save the production order.
That for example ,when we create and release a production order , before we save the production
order,we want a porgram to read the BOM component data. If some component data can meet our
requriement (may be if there is material requirement quantity>100 EA),then the system will pop up a
small dialog box to remind us.
There is user exit PPCO0007 and PPCO0007.But it seems they only can read the head data of the
production order before we save the production order. And the BOM component data of the production
order are saved in the RESB(Reservation Table).So if we do not save the production order,all the BOM
component data are not saved in the RESB table.
So how can slove the problem??
How can read component date before save the production order??
Are there any other user exit we can use???

Hi Just wanted to check am I right that you are trying to check if you have enough Materials Available before you release or Save the order right ? if this is your business objective then when you create order you have material availability tab which checks and gives error if shortage is there. Please let me know if is this wht you asking for ?

I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me

I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me ..

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

HT4623 i get thgis msg "We're sorry, we are unable to continue with your activation at this time", when i updated ma iphone and it doesn't start .. pls help?

pls help me how to start of ma iphone 3g , as i updated it to ios 6.1.2

99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, because it appears that it was not officially unlocked.

How to get BOM component dependant demand whitout having BOM header in APO?

Hello,
I would like to know if it is possible to get BOM component dependant demand in APO without having BOM header in APO.
If someone already did that, please thanks to share your experience.
Thanks a lot and best regards.
M.Niang

Hi Niang,
There is an functionality in APO - DP module called "Forecasting with Bills of Material". You need create DP-BOM (PDS/PPM) from R/3.
Please refer the SAP help link for details.
http://help.sap.com/saphelp_scm50/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
Hope this is what you are looking for.
Regards,
Nawanit

HT201407 hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help

hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help me.thank you

Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
hannibalfromlemery wrote:
.I cant activate my Iphone 5. I bought this from someone
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.

BOM component sizes are getting doubled?Pls help?

Similar Messages

Maybe you are looking for