BOM Copy error
Hi ,
Sales BOM already created for Plant F201 and GHO012 is header material of BOM and 6 line items .I created / copied Sales BOM from F201 to DR52 plant while doing first three lines item are getting copied from F201 to DR52 but rest of 3 line items are not able to copied 'system gives error message' .
Please kindly let me know the transaction and what is solution for this .
Thanks
Regards
Ram
Hi
For any BOM to be created in a plant the precondition is :
all materials( header & components )should have a material master in that plant.
In this case you are copying BOM from one plant to another plant.
There might not have Material master exisitng for those three remaing materials in the second plant.
Pl. check.
Regards
YMREDDY
Similar Messages
-
Copy error -36 when copying from Time Machine disk to Mac
Since using OS X 10.6.(.6), I can't copy certain files from my Time Machine disk to the Mactintosh hard disk without getting a copy error -36. The error doesn't occur with all files: for example pdf files will copy without problems, but Filemaker Pro files and iCal files don't. May be it's important to mention that when I retrieve files from the Time Machine disk, I have to mount the "sparse bundle" with my user files first and then drag the files to the desktop or an other place. This is because I'm running File Vault. If I try to retrieve files that were backed up under OS X 10.5, I get no copying errors at all. So it looks as if Snow Leopard has something to do with it. Is there anybody who has seen this problem before and knows how to solve it?
Ok, I finally was able to complete the Disk Utility Repair, and it says everything is ok. Still the problem in restoring presists.
One thing I noticed is that most files that Time Machine restore chokes on have an added set of permissions added to the file or folder with the same user name as mine, and the permissions level says "Custom". Thus it has 2 sets of permissions defined with the same user name, one with Read/Write and another with the same name that says "Custom." Am I explaining this well? Maybe this is a clue? -
Finder Nonresponsive After Copy Error - Best Plan of Action?
The following happens on my system frequently. I am running 10.5.8.
Any help in understanding why this happens, and more importantly, what is the best course of action to take when it does, would be greatly appreciated.
I ask the Finder, via drag-and-drop, to copy a folder containing tens of gigabytes of data, from one, usually external, hard drive to another, usually external, hard drive.
The Copy window opens, reports the appropriate amount of data to be transferred, and the blue progress bar proceeds as expected. Partway through the process, the Finder returns a copy error, which states something like (I apologize for the paraphrase, but I do not have the exact message in front of me at the moment.) "The file [specified name of file] contains data that cannot be read or written." I click the "Ok" blue button (the only option provided). The error window disappears, and the Copy window is left, but the copy process does not continue, or at least the window does not indicate that any activity is happening. If I click the grey "x" button in the Copy window to stop the process, nothing happens. Even if I wait several hours after clicking the grey "x" button, nothing happens.
Trying to drag any of the hard drives connected to the system (whether they are the drives from or to which the data is being copied) results in an error message indicating that the drive is in use and cannot be unmounted.
Trying to shut down the system via the Apple menu usually results in no apparent activity. Other times, a message will eventually appear indicating that the Finder is preventing shutdown.
Attempting to relaunch the Finder via Force Quit results in the desktop items disappearing, but the Finder not quitting (the blue light remains below the dock icon). At times, I have been able to use Spotlight to run Terminal to attempt command line shutdown instructions, to no avail, and to attempt command line Finder termination commands, also to no avail.
The only action that results in a predictable, effective response is holding down the power button until the system shuts off. This, of course, is not ideal in terms of the hard drive data.
There are no known issues with the files being copied. For example, upon rebooting the system, I can copy the files without generating an error.
Can anyone provide any insight as to what is happening, how to prevent it from happening, and what to do when it does happen?
If more information will help, I will gladly try to answer any questions.
Thank you.
RDFrelaySome additional information: The error message reads as follows: "The Finder cannot complete the operation because some data in "(file name)" cannot be read or written." It also says "Error code -36".
Using Force Quit to ask the Finder to relaunch results in a blank desktop (everything except the Dock is gone).
Again, there is nothing wrong with the file that is named in the error.
Does anyone know what is going on and how to resolve it?
Thanks.
RDFrelay -
What does the "Copy error code files" option do in the build spec properties
I have the "Copy error code files" checked for my application build specification but when I run my EXE on a different computer and call the simple error handler, I don't get the custom error from my computer's
C:\Program Files(x86)\National Instruments\LabVIEW 2012\user.lib\errors\User-errors.txt file. Instead I get the "this error code is undefined" explaination.
I've also tried including that file in the "always included" section of the build spec but that didn't work either. Am I missing something?
CLD (2014)Infinite,
Check out this link:
http://www.ni.com/white-paper/3209/en
Specifically this paragraph:
"When building an executable (EXE) or shared library (DLL) with the Application Builder, make sure to add the custom error file as a support file (under the Source Files tab). For an executable, the custom error file will be saved in the <executable destination directory>\user.lib\errors directory. For a shared library, the custom error file will be saved in the National Instruments\Shared\LabVIEW Run-Time\<version>\Errors directory. When distributing a shared library, make sure to install the custom error file in this directory."
James K.
National Instruments
Applications Engineer -
Hi Experts,
While Client copy in Local System , I am facin gthis Error, please anybody help me out.
client copy error:cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
Regards,
Amit,Your Error Message is like => cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
This means 'w2k3-web53' is your machine name. and your sap system name is 'ECC'.
1) If you are on windows then :
Type '
w2k3-web53\sapmnt' in address bar, this gives you an error and hence you are getting the above mentioned SAP error.
Therefore to get out of this error follow the simple steps=>
I) Create 'sapmnt/trans/log' (recursive) directories anywhere on your machine.
II) Share 'sapmnt' directory over network {right click on directory->properties->sharing} with full access to others.
III) Confirm this by typing '
w2k3-web53\sapmnt' in your address bar. 'CC00000*.ECC' will be created automatically by SAP system while copying.
2) If you are using Linux then:
Create the directories as mentioned above and give full access to directories by using CHMOD command.
Share 'sapmnt' directory if necessary.
Note: Change the protection level of your client in SAP if necessary:
SCC4->EDIT->Double click your client -> then set Protection level at level 0 {No restriction}. -
Documanage Error #2002 (File Copy Error)
Hi,
I am getting this error "Documanage Error #2002 (File Copy Error)" during the Genarc process. I am not able to understand the problem. Can any one please let me know about this error.
Also is there documentation about documanage errors, please let me know.
Thanks in AdvaceTurn on your debugging options in Documaker INI and see what you get.
< DBHandler:DMIA >
DEBUG = YES
< DBHandler:ODBC >
Debug = YES
Also you may want to turn up your logging in the poffice.ini and check those logs as well. It's been a while since I've seen that but if I recall correctly this error usually happens when you are trying to archive a transaction from Genarc to Documanage and either the connection is broken or the document category doesn't match. -
Escaping file copy error?
I was copying a data CD which had a bad file. When I hit the bad file, the message appeared "The Finder cannot complete the operation because some data in "the source file" could not be read or writte. (Error code -36)".
When I click okay, the Copy message box remains, and clicking the X in that box to stop copying had no effect. I had to restart finder to escape. This is OS 10.5.4 on 2 x 2.66 GHz Dual-Core Intel Xeon Mac Pro. Thanks for any ideas. I couldn't find a bug report location in Apple Support.Thanks for the suggestion, but there are no permission errors on the target disk or the system disk. The problem file is on a CD, and there's no way to repair permissions on a CD.
I think it's an OS bug that the copy dialog box won't cancel on a bad file copy error. -
Hi,
We are currently experiencing some failures with copying files (files
typically over 100mb in size) up to one of our file servers, and we're
hoping that someone has seen the problem or has some advice.
The server is an HP Proliant DL360 G5 (with two Broadcom Gigabit NICs)
running Novell Netware 6.5 with SP8. The typical CPU load is below 20%,
however packets per second is typically in the 50k-75k packets per
second range during the day.
On Windows XP with Novell Client 4.91 SP5, we receive: "Cannot copy
<filename>: The specified network name is no longer available."
On Windows 7 with Novell Client 2 SP1 (IR8), we receive "Can't read from
the source file or disk."
The symptoms are more typical when the traffic is higher on the server
and in areas with faster switch hardware. There is no consistency with
when (during the copy) we see the error and there seems to be no affect
on the server itself. Even though we have not seen errors on the
monitor's NIC stats, we have tried moving from one server NIC to the
other to see if it is somehow related to a NIC. The errors are
repeatable on both the server's internal drives as well as the connected
SAN drives.
In addition, we have another server with almost the same configuration
(same hardware, SAN connection, OS version and patch level) that is not
having this problem at all. The main difference is that the load on
this 2nd server is very small compared to the server where we see the
copy errors.
Any info is greatly appreciated.
Thanks.
,MattHello,
please check the driver's version of the broadcom nics (BX2.LAN).The
were some versons causing issues (3.70, 4.41, 4.42) in the past look
whether version 5.01 is loaded on the server and check whether you team
the nics with broadcom teaming software or the netware built-in. MAybe
you should also check the ports of the network switch for connection
options (Speed/Duplex settings being auto/auto or 1G/full). Also the
firmware of the server (BIOS, NICs etc.) should be checked, you can find
updates on the website of HP:
http://h20000.www2.hp.com/bizsupport...&swEnvOID=1064
Regards and good luck
Burkhard Wiegand
Netware Admin
Debeka-Versicherungen
D-56068 Koblenz -
CK40N error: Missing authorization for BOM (SAP Error: CK-581)
Hi Experts,
When running CK40N, I found an error message Missing authorization for BOM (SAP Error: CK-581).
If this is the problem of my CK40N that make object cannot be costed, how can I solve this? Is this relate to SAP authorizartion?
Thanks.
sbmelHello,
While doing Costing run CK40N or Cost estimate CK11N, you require having authorization of T. Code CS03 for the plant in your SAP ID as it explodes BOM.
Kindly contact basis team & take the authorization on your SAP ID.
Regards,
Anand -
Hello All
I have a VI that write an image to a file. I have an error at the IMAQ COPY. Plaese see the attachment.
Thanks
Nghtcwrlr
********************Kudos are alwayzz Welcome !! ******************
Solved!
Go to Solution.
Attachments:
IMAQ COpy error.vi 11 KB
Error.jpg 17 KBHi Nght,
It's because you are trying to copy a reference to an image, not an image itself.
See my revised version; you need to use another IMAQ Create so you have one location for the original and one for the copy. You also need to specify filepaths for the original and copy.
Thanks,
Eden S
Applications Engineer
National Instruments UK & Ireland
Attachments:
IMAQ COpy error.vi 11 KB -
Dears,
Today I am going to do remote client copy from PRD to QAS.
For it yesterday i scheduled Test run in simulation mode.As i am having two CPU for both Dev and PRD so I scheduled it with 6 Parallel Processes.
But my Test run failed with errors:
Copy Type Remote copy
Test Run
Profile SAP_ALL
Status Ended with Errors
User SAP*
Start on 14.08.2008 / 01:30:54
Last Entry on 14.08.2008 / 05:57:54
Statistics for this Run
- No. of Tables 30,806 of 30,808
- Deleted Lines 15
- Copied Lines 72748,776
Warnings and Errors
Table/Object Component Error
BKPF FI Read or Conversion Error
BSIS FI Read or Conversion Error
Thus showing read or Conversion Error in these two tables.
In System log of source system I also see these error:
ORA-01652 unable to extend temp segment by 2560 in PSAPTEMP
Database Error 1652 at SEL access to table BKPF.
Database Error 1652 at SEL access to table BSIS.
Please suggest how to resolve the issue.
Shivam
Edited by: Shivam Mittal on Aug 14, 2008 6:08 AMHello Shivam
How is your remote copy going on?
Did you increase the size of psap temp in order to carryon with the copy?
Your Source system is PRD system.Are you doing this copy while users are using the PRD system.
If not then this may not be result of client copy? or
if no user is logged in in your PRD system,You have to decide if this is due to client copy.
Let me know what corrective measure taken by you to completed the remote client copy?
normally we dont get this dump in the source system but I have psaptemp around 30 GB or more in al my systems so may be this might have not surfaced in my environment.
Thanks
Amit -
Hi Experts,
I am currently facing an issue/error while doing a homogeneous system copy with SAP NW 7.4 (SAP ERP 6.0 Ehp7) servers. Both source and target systems are test/demo servers and system copy procedure needs to be established as a part of implementation.
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or Move( Last error reported by the step: Assertion failed: Unable to load database RD3. Refer to trace file sapinst_dev.log for further information.)
Sybase ASE version = 15.7_122
sapinst_dev log file description -
Error description (sapinst_dev log file) –
Execution of the command "isql64 -e -w999 -Usa -SSAP-PROD-TEST:4901 -X" finished with return code 0. Output:
Password:
1> use master
1> load database RD3
2> from 'F:/Backup_RD1_04042015/rd1_s1.dmp' stripe on 'F:/Backup_RD1_04042015/rd1_s2.dmp' stripe on 'F:/Backup_RD1_04042015/rd1_s3.dmp'
Backup Server session id is: 33. Use this value when executing the 'sp_volchanged' system stored procedure after fulfilling any volume change request from the Backup Server.
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s3.dmp'
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s1.dmp'
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6 ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s2.dmp'
Msg 3105, Level 16, State 4:
Server 'RD3', Line 1:
Data on dump will not fit into current database. Need 101376 Mbyte database.
1> online database RD3
Msg 930, Level 14, State 1:
Server 'RD3', Line 1:
Database 'RD3' cannot be opened because either an earlier system termination left LOAD DATABASE incomplete or the database is created with 'for load' option. Load the database or contact a user with System Administrator (SA) role.
No matter how much I try to execute the commands for loading database (LOAD DATABASE & ALTER DATABASE commands), i's not working. I have already added the size mentioned above. Although it still didnt work the size of the DB grew by 99GB (displayed in the incresed size of F: drive in Windows.server 2012 r2 OS level.
Any help leading to closure of this error is highly appreciated. I have attached all necessary screenshots for your kind reference.
Thanks and regards,
M. NizamHi Nizamuddin,
Message text
Data on dump will not fit into current database. Need %d Mbyte database.
Explanation
This error occurs when an attempt is made to load a database dump into a database smaller than the dumped database. You cannot use dump database or load database to shrink a database, regardless of the amount of actual data in the database.
Action
If your goal is to load the database from the dump, you must increase the size of the database being loaded into to at least the configured size of the dumped database. You can do this with either the alter database command or by dropping and re-creating a larger database.
If your goal is to shrink the total size of a database, you cannot use dump and load. You must copy all the data out of the database using bcp, drop the database and re-create a smaller database, then re-create the database structure with scripts, and reload the data with bcp.
extend your current master *database* on the master *device* to a total size of 101376MB(or more) (use 'alter database' command)
alter database master on master = <size in MB>
If there isn't enough room on the master device AND the master device is either a file system device in a file system that has free space or was created on a raw partition that is actually larger than the master device was defined, then you can use the DISK RESIZE command to enlarge the master device
disk resize name = "master", size = <additional space in MB>
Regards,
V Srinivasan -
BOM Cretion error with BAPI : BAPI_MATERIAL_BOM_GROUP_CREATE
Dear All,
Desc:
Here i am trying to create a BOM with differnet componants :
i am getting the below error while creating the BOM in varient alternative..
W BAPI1080 028
Error/warning when checking the structure of the BOM group with ID=BOMGROUP1
A BAPI1080 010
Variant/alternative 01 can only occur once with the function NEW
A BAPI1080 010
Variant/alternative 01 can only occur once with the function NEW
A BAPI1080 010
Variant/alternative 01 can only occur once with the function NEW
Please find the below code:
Code:
To get SC details
Get Plant details
SELECT * FROM y27d_dc_marc
INTO TABLE l_t_y27d_dc_marc
WHERE instnr = '552'. "instnr
IF sy-subrc = 0.
SORT l_t_y27d_dc_marc BY werks.
ENDIF.
IF l_t_y27d_dc_marc IS NOT INITIAL.
Get all Regions
SELECT * FROM y27d_dc_dt_plant
INTO TABLE l_t_y27d_dc_dt_plant
FOR ALL ENTRIES IN l_t_y27d_dc_marc
WHERE werks = l_t_y27d_dc_marc-werks.
ENDIF.
Read the SC Details
READ TABLE l_t_y27d_dc_dt_plant
INTO l_r_y27d_dc_dt_plant
WITH KEY werks_typ = g_c_sc. "SC
IF sy-subrc = 0.
Populate SC details
g_f_sc_plant = l_r_y27d_dc_dt_plant-werks.
ENDIF.
Material BoM Group Header Data
l_r_bomgroup-bom_group_identification = 'BOMGROUP1'.
l_r_bomgroup-object_type = 'BGR'.
l_r_bomgroup-object_id = 'BOMGROUP1'.
l_r_bomgroup-bom_usage = '1'. " YOU COULD CHANGE THE BOM USAGE TO YOUR needs
Plant assignment for the corresponding group
l_r_bomgroup-created_in_plant = g_f_sc_plant. "'0470'.
l_r_bomgroup-ltxt_lang = sy-langu.
l_r_bomgroup-technical_type = 'M'. " bomgroup-technical_type = wstzu-stlty.
l_r_bomgroup-bom_text = 'Test for BOM YSPR'.
APPEND l_r_bomgroup TO l_t_bomgroup.
CLEAR l_r_bomgroup.
DATA : l_f_var_alter TYPE stalt,
l_f_var_alter_cnt TYPE stalt.
Get BOM Item details
SELECT * FROM y27d_dc_bom
INTO TABLE l_t_bom_item
WHERE instnr = '552'.
IF sy-subrc = 0.
DESCRIBE TABLE l_t_bom_item LINES l_f_var_alter.
Populate item data
LOOP AT l_t_bom_item INTO l_r_bom_item.
Varient alternative for all the corresponding componants
l_f_var_alter = sy-tabix.
Details of the items of the variants
l_r_itemdata-bom_group_identification = 'BOMGROUP1'.
l_r_itemdata-object_type = 'ITM'.
l_r_itemdata-object_id = l_r_bom_item-bcomponant. "'MDTRAW2011'
l_r_itemdata-item_no = l_r_bom_item-bitemno."'0010'.
l_r_itemdata-item_cat = l_r_bom_item-bitemcat. "'L'.
l_r_itemdata-component = l_r_bom_item-bcomponant. "'MDTRAW2011'.
l_r_itemdata-comp_qty = l_r_bom_item-bquan."'2'.
l_r_itemdata-valid_from_date = sy-datum.
APPEND l_r_itemdata TO l_t_itemdata.
CLEAR l_r_itemdata.
Item componant assignment to a variant/alternative
l_r_variants-bom_group_identification = 'BOMGROUP1'.
l_r_variants-object_type = 'BOM'.
l_r_variants-object_id = l_r_bom_item-bcomponant. "'MDTRAW2011'. "'BOM1'.
l_r_variants-alternative_bom = '01'.
l_r_variants-bom_status = '01'.
l_r_variants-base_qty = '100'.
l_r_variants-valid_from_date = sy-datum.
l_r_variants-function = 'NEW'.
APPEND l_r_variants TO l_t_variants.
CLEAR l_r_variants.
Item componant assignment to linked items
Linking items to the corresponding variants
l_r_itemlink_to_var-bom_group_identification = 'BOMGROUP1'.
l_r_itemlink_to_var-sub_object_type = 'ITM'.
l_r_itemlink_to_var-sub_object_id = l_r_bom_item-bcomponant. "'MDTRAW2011'. "componant linked with varient
l_r_itemlink_to_var-super_object_type = 'BOM'.
l_r_itemlink_to_var-super_object_id = l_r_bom_item-bcomponant. "'MDTRAW2011'. "componant linked with varient
l_r_itemlink_to_var-valid_from_date = sy-datum.
l_r_itemlink_to_var-function = 'NEW'.
APPEND l_r_itemlink_to_var TO l_t_itemlink_to_var.
CLEAR l_r_itemlink_to_var.
ENDLOOP.
ENDIF.
Get the Header details
SELECT SINGLE * FROM y27d_dc_mara
INTO l_r_bom_head_mara
WHERE instnr = '552'. "instnr
IF sy-subrc = 0.
Populate header data
l_r_bom_head-bom_group_identification = 'BOMGROUP1'.
l_r_bom_head-material = l_r_bom_head_mara-matnr. "'MDT01022011'.
l_r_bom_head-plant = g_f_sc_plant. "'0470'.
l_r_bom_head-bom_usage = '1'. "'5'.
l_r_bom_head-alternative_bom = '01'.
APPEND l_r_bom_head TO l_t_bom_head.
CLEAR l_r_bom_head.
ENDIF.
Create BOM
CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
EXPORTING
all_error = 'X'
TABLES
bomgroup = l_t_bomgroup "BOM group
variants = l_t_variants "Varients
items = l_t_itemdata "Item details
materialrelations = l_t_bom_head "Header details
itemassignments = l_t_itemlink_to_var "Item lineked to Varient
return = l_t_return.
LOOP AT l_t_return INTO l_r_return WHERE type CA 'AEX'.
l_f_error = 'X'.
ENDLOOP.
IF l_f_error = space.
Processing successful --> Commit work on PDM system
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ELSE.
Error in processing --> Rollback work on PDM system
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ENDIF.
LOOP AT l_t_return INTO l_r_return.
WRITE:/ l_r_return-type, l_r_return-id, l_r_return-number,
l_r_return-message.
ENDLOOP.
could you please help me to come out of this problem.Hi,
Did you try creating manually through CS01 with the same data? There could be a customization setting to restrict like this.
Thanks,
Vinod. -
Hom System Copy- Error running J2ee migration tool kit
Good Day Guys,
Im performing homogenous system copy.I have encountered below error:
INFO 2008-10-20 13:05:33
Output of C:\j2sdk1.4.2_18-x64\bin\java.exe -classpath D:/usr/sap/LE1/SYS/global/sltools/sharedlib/launcher .jar;. com.sap.engine.offline.OfflineToolStart com.sap.sdt.jmt.migrationtool.MigrationToolImport D:/usr/sap/LE1/SYS/global/sltools/jmt;D:/usr/sap/LE1 /SYS/global/sltools/sharedlib import.switch resume downtime mti.properties is written to the logfile C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/CENTRA L/AS/runJmt.log.
WARNING 2008-10-20 13:05:34
Execution of the command "C:\j2sdk1.4.2_18-x64\bin\java.exe -classpath D:/usr/sap/LE1/SYS/global/sltools/sharedlib/launcher .jar;. com.sap.engine.offline.OfflineToolStart com.sap.sdt.jmt.migrationtool.MigrationToolImport D:/usr/sap/LE1/SYS/global/sltools/jmt;D:/usr/sap/LE1 /SYS/global/sltools/sharedlib import.switch resume downtime mti.properties" finished with return code 27. Output:
ERROR 2008-10-20 13:05:34
CJS-20068 Error when running the J2EE Migration Toolkit.<br>SOLUTION: See output of logfile C:\Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/CENTRA L/AS//runJmt.log: ''.
ERROR 2008-10-20 13:05:34
CJS-20068 Error when running the J2EE Migration Toolkit.<br>SOLUTION: See output of logfile C:\Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/CENTRA L/AS//runJmt.log: ''.
ERROR 2008-10-20 13:05:34
FCO-00011 The step RunMigrationController with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_One host_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind |ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|in d| ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind |ind|ind|2|0|RunMigrationController was executed with status ERROR .
INFO 2008-10-20 13:06:29
An error occured and the user decide to stop.\n Current step "|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_On ehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|in d|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|i nd|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind |ind|ind|ind|2|0|RunMigrationController".
I have checked the runjmt.log its empty.
I did find a note 966752.but couldnt solve the problem.Another thing do we need to have same version of j2sdk,mine are different on source(ia64) and target(x64).
Please advice.
BasisNerdCAn you precise also what Migration tool are you using?
Migration from 5.1 to SAP BPC 7.0 NW?
In that case when you are speaking about the installation about what part are you speaking?
I think actually you are speaking about the migration tool from 4.2 to 7.0 Microsoft version .
In that case you can install the mIgration tool just with SAP BPC sys admin users and you have to input the password for that user. Sys admin user for BPC is usually the user used for installation of SAP BPC server.
Any way I suggest to follow the Migration tool training document and there you will find all the information necessary.
Regards
Sorin Radulescu -
Netcenter Drive Disconnects When Copying: Error -36
I recently purchased a 250 GB Western Digital Netcenter Drive for my network. Model Number: WDXE2500JBN
I am able to connect directly to the drive by using either the Network browser in Finder or mapping to the drive directly using "Connect to Server" in Finder with the IP address of the drive, i.e.: smb://10.10.10.10/shared
The drive inconsistently disconnects when copying any amount of data (I am trying to backup my iTunes). After a few minutes of copying I receive the following error:
'The Finder cannot complete the operation because some data in "" could not be read or written. (Error code -36).'
I have tried to reconnect, reboot, restart, the computer, router, Netcenter and still Finder gives me the message after copying approximately a gig worth of data.
If you have some suggestions or thoughts, I would greatly appreciate it-
I also have a Windows 2000 and Windows XP machine on my network and they are able to copy and connect to the drive without any issues.
MacBook Pro 15" 2.16 Intel Core Duo Mac OS X (10.4.8)
MacBook Pro 15" 2.16 Intel Core Duo Mac OS X (10.4.8)
MacBook Pro 15" 2.16 Intel Core Duo Mac OS X (10.4.8)I did, they said it is an issue with how OS X handles Samba connections.
Any thoughts?
Maybe you are looking for
-
Please can anybody help me? For no apparent reason or significant changes to my laptop I cannot open itunes from my desktop icon.I have uninstalled the whole product and re-installed it. But to no avail. I am very frustrated and cannot access my libr
-
Boot Camp and Windows 7 Problems
I have found a reproducible bug with Boot Camp and WIndows 7. Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7. Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at
-
Any Way I Can Make My Page's Images Load One At a Time?
Hi folks, I have a page with a stack of large images. It takes several seconds for them all to load, but I was wondering if there's any way I could dictate the order in which all of these images load? This way, the top image would load first, then th
-
Why won't my computer recognize my brand new iPod Nano I purchased today?
I purchased a Nano 3 weeks ago and it quit holding a charge. I couldn't use the wall charger (Apple product) and then when I tried charging on my computer, nothing happened. I returned it and went to set up the new Nano today on the computer and the
-
Receiver SOAP Communication channel -- Target URL
Hi Experts, Can anyone provide some inputs for my below question? How the receiver SOAP Communication channel internally calls the Target URL? What is the internal process behind this call? I would really appreciate you all if could provide answers.