BOM Creation for different FG from 1 Raw material

Hi Experts,
In my company I have 1 scenario where Sheet is a Raw material. After doing operations in 1 sheet (RM) 10 Finished Product are produced.
So please can anybody help me to create BOM for FG as from 1 same Sheet (RM) 10 different Fgs are produced.
Regards,
Uttam

Uttam,
Do you always produce 10 different FG's from single raw material sheet? or it is just a possibility to use same raw material in different FG's.
You can maintain independ BOM with sheet materiila as a compoenent . hope you have exact measure of qty you need in each BOM.
If all the FG's are produced together then go with co-products.
Regards,
Santosh Sarda

Similar Messages

Deriving the valuation type of a product automatically from raw material

Hello everyone,
I want to know if it is possible to make it such that a product gets its valuation type automatically according to the valuation type of the raw materials that go into its production. For instance:
Say, I have a product P1001, to produce 1 PC of which takes 3 KG of raw material R1001. P1001 has the valuation types PRD01 and PRD02 assigned, while R1001 has RAW01 and RAW02. I want P1001 to have PRD01 when the R1001 used for it has RAW01, but PRD02 when RAW02.
Is this at all possible? I was thinking maybe product cost collectors, production versions and BOMs could somehow be used for a workaround; except there is no apparent connection to valuation types in any of these.
Thanks in advance.

Hi,
Generally MRP consider stock from all the storage location when run the MRP for Plant level for material.
However we can exclude the particular storage location from MRP Run, for those following settings to be done.
Go to MRP-2 View of material master and select the storage location to be excluded from MRP. (Press Shift +f1 ex .sloc2) As per your case it should be RMSL
In that MRP view go to Storage location MRP Tab.
And assign u201CSLoc MRP indicator = 1 (Storage location stock excluded from MRP)u201Dand save.
Now run the MRP, stock from sloc2 will not be considered to create-planned order.
Please try this and revert back.
Cheers,
Kumar.S

Label creation for different customers

Hi All, I am new to EHS and need all your suggestions on this, I would like to design different labels for different FERT materials or for different customers, is this possible to design label layout and then printing it..

Hi,
both is possible.
Customer Label
http://help.sap.com/erp2005_ehp_06/helpdata/EN/f6/9c463cae8f505fe10000000a11402f/frameset.htm
http://help.sap.com/erp2005_ehp_06/helpdata/EN/a4/11443c9d068330e10000000a11405a/frameset.htm
Material Type
There is a view "label data view" to assign the labels for each material. This view is independent from the material type, so you can maintain labels for all materials that require a label.
Regards,
Mike

Payment terms for different products from a single vendor

Hi Pundits,
Our client has a requirement to assign different payment terms for different products. Each product he buys from his vendor has it's own payment terms. He wants us to customize in such a way that when he/user enters the invoice, not only the vendor number is shown along with the product name but also the payment terms for that particular product are calculated.
I know that only one payment term can be assigned in the vendor master data. Is there anyway to get around this?
Creating the same vendor multiple times and assign payment terms looks a possible option but that looks quite hectic cause he has close to 1000 payment terms.

Taurian, thank you for that suggestion!
I can maintain as many existing payment terms as the client has with his vendors and let him choose the payment terms at the time of invoice entry.
The only problem is that he might have to change it according to the current market rates for that product. So maintaining any payment term is of little use.
Edited by: Dummy_Variable on Aug 16, 2011 8:26 AM

T- code for viewing cost of raw material

Hi Experts,
There are so many elements in arriving at cost of raw material such as moisture loss, transit loss, handling loss etc. Is there any report in SAP which shows all these elements, if yes, what is the T- code? Please advise.

Hi,
Please check the table MBEW for the material for its cost normally or the MM03 .However at the stage of raw material the transit loss etc? Normally if any operation is done over the material then losses like this will come .
Normally once the PP things like Routings etc are done and then for the finished material which contains this raw material will have costing run to have the final cost at CK11N .
If not the above answer suffie you please elobare your requirement .
Regards,

FM / BAPI Inbound delivery creation for a Purchase Order without material

Dear All,
I have a requirement to create a Inbound Delivery for a Purchase order without material number. The Purchase Order has only Material text and no material number. Please let me know a BAPI or FM to create inbound delivery in this case where there is no material defined on PO. I require BAPI / FM since I have to make a web-service for the same.
Thanks in advance!
Abhishek

Hi I did a coding in one of the userexit. If ekpo-matnr is empty then fill
KOMDLGN-UMVKZ = 1
KOMDLGN-UMVKN = 1
KOMDLGN-MEINS = EKPO-MEINS
This parameters i.e. Qty conversion are necessary and since MATNR does not exists it has to be filled.

Creation of PODs for different divisions from crm to ISU

When we try to create one Premise and 2 PODs of different divisions in CRM using UTIL -IC role , the data gets replicated as two premises in the ISU. The standard CRM_POD_INST template category is used for this.
Is this standard functionality?
Please provide info on how to overcome the above?
Regards,
KAK

Excuse, you may enter more in detail?
I have created a custom field on BP using the AET would now like to replicate this custom field in BP also in ISU.
I can do all this using the EEWB, but I would avoid it, since, in ISU we already have custom fields on BP, I just can not link them with CRM.

BOM creation for a sugar industry -reg

Hi,
in all otehr industries we fix the base quantity and then create BOM with its components and their quantities based on which planning for procurement and consumption of the child parts happen .
but in the sugar industry the BOM headers quantity depends on the incoming sugar cane quality .
if the sugar cane is of some quality you may get 1 ton out put , if it is of different quality you may get 0.8 ton
it keeps changing continuously as sugar cane feeding keep continues ....
in this type of cases how can be BOM created ?
we dont know the base quantity of the BOM header ?
any inputs and thoughts on this
regards,
Madhu Kiran.

Hello,
SAP explodes BOMs top-down not bottom-up hence this is diffcult to accomodate.
Is there a way to know the likely output quantity in advance by classification information of an input batch? Then perhaps 'material quantity calculation' in PP-PI can help. If you are using that module that is.
Cheers!

KM News creation for different layouts using xml form builder

Dear All,
We have a scenario where we need to create a xml template to generate KM News. The same KM News template should have three different show forms (with different design layouts).
At Edit form there will be 3 option buttons based selection of these option button respective Show form should be displayed.
Ex:
If the user selects "Option 1" it should show "ShowForm 1"
If the user selects "Option 2" it should show "ShowForm 2"
If the user selects "Option 3" it should show "ShowForm 3"
Any help will be appreciated and rewarded points.
Thanks,
Satya

>
Yogesh Galphade wrote:
> you can achieve this using web page composer, it provides standard funcationality for RSS feeds.
> Deploye bussiness package for wpc from market place. There is standard role to create webpage.
Can you Please elobrate on this, i have RSS function in web pages but rss feed is not working.

Price difference from Raw Material

Hi,
I have activated material ledger, Price control for ROH V, A/c determination is 2 and for SFG & FG Price control S & A/c determination set as 3
Production having set of RM material & SFG Material,
and I have price difference from RM purchase ( GR/IR) ,
Price difference from Production order settlement so on..
i need clarification that How standard system behave when ML activate Price difference loaded to ROH , SFG and FG material.
rollup to higher material
and further i need separate GL for price difference GR/IR & Order settlement.
Kindly do the needful.
Regards.
Vinu

Hi Vinu,
Please take a look at the sap note 721360 which provides very helpful information about
MAP-controlled materials and actual costing.
In addition take a look at the sap note 81682 and 689189 which are useful too.
Regards,
Maria Luisa

Data Source creation for Master Data from Flat File to BW

Hi,
I need to upload Master Data from Flat File. Can anybody tell step by step right from begining of creation of DataSource up to Loading into Master Data InfoObject.
can any body have Document.
Regards,
Chakri.

Hi,
This is the procedure.
1. Create m-data with or without attributes.
2. Create infosource .
    a) with flexible update
         or
    b) with direct update
3. Create transfer rules and assign tyhe names of m-data and attribute in "Transfer rules" tab and transfer them to communication structure.
4. Create the flat-file with same stucture as communication structure.
5. if chosen direct update then create infopackage and assign the name of flat-file and schedule it.
6. if chosen flexible update the create update rule with assigning name of the infosource and the schedule it by creating infopackage.
Hope this helps. If still have prob then let me know.
Follow this link also.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Assign points if helpful.
Vinod.

Vendor creation for different cities and different address in same city its

hi all
            please go through my requirement bellow.
                Problem of single Vendor with his presence in multiple cities. For e.g. a vendor ABC has office in Bangalore, Hyderabad and Chennai.
     Vendor is having multiple offices in a same city. For e.g. ABC may have 2-3 diff offices in Bangalore itself. Each of these offices may or may not be functionally similar
Regards
Ravi.

yes i asked the same last week
i got partner functions option,ok fine but for main vendor which partner roles i have to maitain in partner roles screen of vendor master
ex:suppose my main vendor is 20000 and for my bangalore location i created one more vendor say20001,now in 20000 ,20001partner screens of vendor creation which functions i have to mention.
Regards
Ravi.

Different colors from RAW+JPEG mode of my camera

The same issue of always... color profile.
I shot my entire trip thru Europe using RAW + JPEG Basic mode of my Nikon D40 digital camera. Oddly, the JPEG files are looking MUCH MUCH better, because iPhoto assigned the correct color profile to the files, instead of signing all RAW files as Adobe RGB. (I have Adobe RGB option on my camera, but I shot as sRGB).
I tried installing Aperture trial to reprocess all RAW files and no success. Looking RAW and JPEG side by side makes me sad.
What should I do to make iPhoto recognize my RAW files as sRGB?
Sorry for posting this again... I read more than 20 threads about color issues and I didnt managed how to fix my problem.

Hi Dave,
yes, thats generally what i want to do.
I have the PEF-Files out of my camera and i convert them with the Adobe DNG converter to the DNG format. The old Pentax K100D is using uncompressed PEF, thats why the pictures are twice the size than the converted DNG
If i import these files for further processing into Lightroom, they are looking similar to the originals viewed with another application (e.g. the pentax development tool) for a second, after that Lightroom is changing the preview to the settings of the Adobe Profile. Colors are much more colder and less colorful. If i try to change the profile in the developement tab, there are no visible changes to the picture.
I've downloaded the DNG Converter and Camera RAW. There are several profiles included, but i don't know how to use them with Lightroom or Photoshop CS4 (with installed ACR).
I've created a screenshot of the differencies so you know what i mean.
Screenshot
On the left side you can see the developed JPEG via PEF out of the Pentax-Software (Silkypix), on the right is the developed JPEG out of the DNG via Lightroom. Both files are without any further changes to the development process.
The left picture corresponds to the original conditions.

Org Structure creation for different countries

Hi,
Pls guide me as of how to proceed with the scenario.Client has Organization structure in 2 countries,that is India and srilanka.
1/ While configuring in the system for creating Org structure should i change the MOLG value(in SU3)accordingly for each Country?
2/ India business head and srilanka business head reports to Group MD who sits in Malaysia where there is no Org structure.So how do i maintain this reporting.I mean should i create a Org unit in Malaysian Country grouping.Will this work?
pls guide me
Thanks

Dear,
Configuring the Client Organization is completely depending on Clients requirements. In my View when there is no org structure in maysia then there is no need of worry about it. For your other question
you can use one Operating chart of accounts for both countries and individual country specific chart of accounts to meet there country legal requirements.
But important thing is you need to ask and confirm with your client what are the requirements they have. Thank you.
Regards,
Ahemmed

Diff stock GL account for raw material

Hi,
We have raw material under 2 different location, one is under raw material warehouse, another one is under staging area which belongs to production. From time to time, we will issue stock from RM warehouse to staging area.
The stock GL account (either debit or credit) for the raw material is RM Stock (140001) when we do any movement.
But we do not want like this. We want that when there is any movement from raw material warehouse location, it will charge to GL account 140001 (RM Stock). And when the movement is from starging area location, it will charge to another GL account (140002 - production stock).
We want to seperate out the GL account for the raw material if they are under different storage location.
Can this be done?
Kindly please advise. Thank you.

Hi Sim
Valuation of Stock is done at Plant level and not Storage Location Level. Within a Plant, you can differentiate the G/L accounts based on the Valuation Class assigned in the Accounting view in Material Master.
The above settings enable automatic account determination at the time of GR. If you want different G/L accounts for different areas, there are 2 options:
1. Configure and Activate Split Valuation. This will enable you to give different Valuation Classes for different Storage Locations in Matl Master.
2. The better option is to make the 2 locations as 2 different plants and extend the materials to both these plants.
However, pls mention your purpose of differentiating the G/L accounts. If it is only to view the stocks in the 2 areas, there are many reports like MB52, etc.
Hope this clarifies.
Thanks

BOM Creation for different FG from 1 Raw material

Similar Messages

Maybe you are looking for