BOM (cs01) bdc code
Hi All,
I need BDC code for BOM (cs01), i don't know how to handle "Table Control" in BDC.
Flat file is also required. Because, i think flat file arrangement will be differ from regular flat file format.
It is very urgent.
Thanks & Regards,
Srinivas
Hi Satya,
To handle table control you need to do the recording of cs01 accordingly.
Record the transaction entring the header data and when you come to the table control, enter one or two rows and press new entries, which gives you new rows for value entry. Finally once you are done with the recording, get the program from the recording.
At the point where you entered value for table control you can see the row/colum indexes. The "New Entry" okcode will give you an initialized index for the new rows.
you need to dynamically increment the indexes for the table control while you loop throught the table control data (item data).
after you pass say 5 to 10 records to the table control, you have to call the OKCODE for the "New Entry" button which gives you fresh rows for value entry and you need to initialize the indexes for the table control rows. This cycle continues until you complete the entried for table control and then proceed with further processing.
Reward Points if this helps.
-Thank you-
Similar Messages
-
Problem uploding flatfile in bom(cs01) using bdc recording
Hi,
I had a problem while uploading flatfile records in bom(cs01) by using bdc recording.
I had four records in flatfile(.txt & xl), i.e., header data with its components.
Sample material:
(Header data) (components)
SOFTDRINKS,WIND,1, ' 14','1','ml','l'
SOFTDRINKS,WIND,1, '11','1','ml','l'
SOFTDRINKS,WIND,1, '13','1','ml','l'
SOFTDRINKS,WIND,1, ' 15','1','ml','l'
while executing, the same component entered while recording has been displayed four times not the ff records.
So, i want to know whether whether ff structure is ok or not,
whether coding is correct or not?
report ZBOM1
no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
matnr(18),
werks(4),
stlan(1),
END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
idnrk(40),
MENGE(13),
MEINS(3),
postp(1),
END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
matnr(18),
werks(4),
stlan(1),
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
END OF BDCDATA.
data: ibdcdata type standard table of bdcdata with header line.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ','
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro using 'SAPLCSDI' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RC29N-STLAN'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29N-MATNR'
'SOFTDRINKS'.
perform bdc_field using 'RC29N-WERKS'
'WIND'.
perform bdc_field using 'RC29N-STLAN'
'1'.
perform bdc_field using 'RC29N-DATUV'
'16.09.2008'.
perform bdc_dynpro using 'SAPLCSDI' '0110'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29K-BMENG'
'1'.
perform bdc_field using 'RC29K-STLST'
'1'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-EXSTL'.
perform bdc_dynpro using 'SAPLCSDI' '0111'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-LABOR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLCSDI' '0140'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSTP(01)'.
perform bdc_field using 'BDC_OKCODE'
'=FCBU'.
perform bdc_field using 'RC29P-IDNRK(01)'
'11'.
perform bdc_field using 'RC29P-MENGE(01)'
'1'.
perform bdc_field using 'RC29P-MEINS(01)'
'ml'.
perform bdc_field using 'RC29P-POSTP(01)'
'l'.
perform bdc_dynpro using 'SAPLCSDI' '0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSNR'.
perform bdc_field using 'RC29P-POSNR'
'0010'.
perform bdc_field using 'RC29P-IDNRK'
'11'.
perform bdc_field using 'RC29P-MENGE'
'1'.
perform bdc_field using 'RC29P-MEINS'
'ML'.
perform bdc_dynpro using 'SAPLCSDI' '0131'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POTX1'.
perform bdc_field using 'RC29P-SANKA'
'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
endloop.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR iBDCDATA.
iBDCDATA-FNAM = FNAM.
iBDCDATA-FVAL = FVAL.
APPEND iBDCDATA .
ENDIF.Hi Dilip,
You are reading your flat file into an internal table, you perform a LOOP over the read itab, but you are not using your BDCDATA data anywhere into IBDCDATA internal table! Those data have to be filled into FVAL parameter.
Here an additional hint:
1. The content of flat file is delivered as a STRING in GUI_UPLOAD. First you have to post these values into a structured internal table. And then perform the LOOP at this structured table.
2. In the new ABAP concept newer ever user Header Lines (in an internal table). One reason: Header Lines are not allowed in ABAP Objects. Instead use
LOOP AT itab into wa_structure.
*do something with wa_structure
APPEND wa_structure to IBDCDATA.
ENDLOOP.
Good success,
Heinz -
To display flatfile rec's under 1 Alternative BOM using BDc recording.
Hi,
I m trying to display flat file entire(i.e.. 4 rec's i m using) records vertically under one (Alternative BOM) for CS01-BOM using BDC recording method.
Now i m tried with the following code,i m getting as one (Alternative BOM) for one ff record,by replacing one by one.
But i want as vertically under one (Alternative BOM).
Can anyone help me to overcome this.
report ZBOM
no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
matnr(18),
werks(4),
stlan(1),
END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
posnr(4),
END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
matnr(18),
werks(4),
stlan(1),
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
posnr(4),
END OF BDCDATA.
data ibdcdata type standard table of bdcdata WITH header line.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ','
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro using 'SAPLCSDI' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RC29N-STLAN'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29N-MATNR'
'SOFTDRINKS'.
perform bdc_field using 'RC29N-WERKS'
'WIND'.
perform bdc_field using 'RC29N-STLAN'
'1'.
perform bdc_field using 'RC29N-DATUV'
'16.09.2008'.
perform bdc_dynpro using 'SAPLCSDI' '0110'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29K-BMENG'
'1'.
perform bdc_field using 'RC29K-STLST'
'1'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-EXSTL'.
perform bdc_dynpro using 'SAPLCSDI' '0111'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-LABOR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLCSDI' '0140'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSTP(01)'.
perform bdc_field using 'BDC_OKCODE'
'=FCBU'.
perform bdc_field using 'RC29P-IDNRK(001)'
BDCDATA-IDNRK.
perform bdc_field using 'RC29P-MENGE(001)'
BDCDATA-MENGE.
perform bdc_field using 'RC29P-MEINS(001)'
BDCDATA-MEINS.
perform bdc_field using 'RC29P-POSTP(001)'
BDCDATA-POSTP.
perform bdc_dynpro using 'SAPLCSDI' '0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSNR'.
perform bdc_field using 'RC29P-POSNR'
BDCDATA-POSNR. "'0010'.
perform bdc_field using 'RC29P-IDNRK'
BDCDATA-IDNRK. "'15'.
perform bdc_field using 'RC29P-MENGE'
BDCDATA-MENGE. "'1'.
perform bdc_field using 'RC29P-MEINS'
BDCDATA-MEINS. "'ml'.
perform bdc_dynpro using 'SAPLCSDI' '0131'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POTX1'.
perform bdc_field using 'RC29P-SANKA'
'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
clear ibdcdata.
endloop.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL NODATA.
CLEAR iBDCDATA.
iBDCDATA-FNAM = FNAM.
iBDCDATA-FVAL = FVAL.
APPEND iBDCDATA .
ENDIF.
ENDFORM.Hi Dilip,
Please change your code.
I request you to please go through BDC tutorials before even starting to write the program.
There are many online tutorials which can help you with.
Also, search in SDN.. there you will get more than thousand results.. with the search term BDC.
Take this suggestion seriously before nayone reports the moderators that u have been posting this thread daily without taking into consideration the previous replies.
Regards,
Vishwa. -
How we load Bom through bdc pgm
Hi I want to load BOM through BDC pgm in wich i am unbale to record the screect flow b coz it asking abt materical not matiching so can u plz send me the navigation screen flow and exple of fields in with i can enter in BOM throus cs01 transaction ... this is very urgent.. Thanking U
Hi
See the Below sample Program ....
Program Loads the Bill of Material
*& REPORT ZPP0120 *
*& Module : PP |
*& Application : The program loads the Bill of Material |
*& |
*| Modification Log |
*| ---------------- |
REPORT zpp0120 NO STANDARD PAGE HEADING
MESSAGE-ID z0
LINE-SIZE 132
LINE-COUNT 65(2).
* Internal Tables *
*Internal table for the BOM file.
DATA: BEGIN OF i_bom OCCURS 0,
matnr(18),
werks(4),
stlan(1),
stlal(2),
stktx(40),
bmeng(16),
menge(16),
posnr(4),
postp(1),
meins(3),
datuv(10),
fmeng(1),
idnrk(18),
potx1(40),
ausch(7),
END OF i_bom.
* Extracting Document and Doc type for POSTP = D.
DATA : BEGIN OF i_stpo OCCURS 1,
doknr(25),
dokar(3),
posnr(4),
stlnr LIKE mast-stlnr,
END OF i_stpo.
* Local work area
DATA: g_my_rec_in LIKE i_bom.
** Declare internal table for Call Transaction and BDC Session
DATA: i_bdc_table LIKE bdcdata OCCURS 0 WITH HEADER LINE.
* Global Variables *
DATA: g_counter(2) TYPE n,
g_field_name(18) TYPE c,
zc_yes TYPE syftype VALUE 'X'.
* Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
PARAMETERS: p_fname1 TYPE localfile .
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-002.
PARAMETERS: p_rloc1 AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-005.
PARAMETERS p_group(12) OBLIGATORY DEFAULT 'ZBOM'.
SELECTION-SCREEN END OF BLOCK c.
SELECTION-SCREEN END OF BLOCK b.
SELECTION-SCREEN END OF BLOCK a.
**WRITE the report header
TOP-OF-PAGE.
INCLUDE zheading.
* Start of selection *
START-OF-SELECTION.
* Load Input file
PERFORM f_load_input_file.
* Create BDC records.
PERFORM create_bdc_records .
*& Form Create_BDC_records
* text:* perform the BDC for the records in the internal table
* --> p1 text
* <-- p2 text
FORM create_bdc_records .
DATA: v_stlnr LIKE mast-stlnr.
DATA: v_postp(1) VALUE 'D'.
IF NOT i_bom[] IS INITIAL.
** Open BDC session
PERFORM open_bdc_session.
SORT i_bom BY matnr werks posnr.
SELECT SINGLE stlnr INTO v_stlnr
FROM mast
WHERE matnr = i_bom-matnr
AND werks = i_bom-werks.
SELECT doknr dokar posnr stlnr
INTO TABLE i_stpo
FROM stpo
FOR ALL ENTRIES IN i_bom
WHERE postp = v_postp
AND posnr = i_bom-posnr
AND stlnr = v_stlnr.
SORT i_stpo BY posnr stlnr.
LOOP AT i_bom.
g_my_rec_in = i_bom.
READ TABLE i_stpo WITH KEY posnr = i_bom-posnr
stlnr = v_stlnr
BINARY SEARCH.
AT NEW matnr.
CLEAR i_bdc_table[].
PERFORM insert_screen_header.
ENDAT.
* Setting up counter for 20 line items
IF g_counter = 20.
g_counter = 1.
ENDIF.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
*next screen
PERFORM bdc_dynpro USING 'SAPLCSDI' '0140'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29P-FMENG(01)'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
CONCATENATE 'RC29P-POSNR(' g_counter ')' INTO g_field_name.
PERFORM bdc_field USING g_field_name i_bom-posnr.
CONCATENATE 'RC29P-IDNRK(' g_counter ')' INTO g_field_name.
PERFORM bdc_field USING g_field_name i_bom-idnrk.
CONCATENATE 'RC29P-MENGE(' g_counter ')' INTO g_field_name.
PERFORM bdc_field USING g_field_name i_bom-menge.
CONCATENATE 'RC29P-MEINS(' g_counter ')' INTO g_field_name.
PERFORM bdc_field USING g_field_name i_bom-meins.
CONCATENATE 'RC29P-POSTP(' g_counter ')' INTO g_field_name.
PERFORM bdc_field USING g_field_name i_bom-postp.
CONCATENATE 'RC29P-FMENG(' g_counter ')' INTO g_field_name.
PERFORM bdc_field USING g_field_name i_bom-fmeng.
*next screen
PERFORM bdc_dynpro USING 'SAPLCSDI' '0130'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
* Check the Item category to direct the screen flow accordingly.
CASE i_bom-postp.
WHEN 'B'.
PERFORM item_text_insert.
WHEN 'Z'.
PERFORM item_text_insert.
WHEN 'T'.
PERFORM item_text_insert.
WHEN 'N'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29P-AUSCH'.
PERFORM bdc_field USING 'RC29P-AUSCH' i_bom-ausch.
* next screen
PERFORM item_text_insert.
*next screen
PERFORM bdc_dynpro USING 'SAPLCSDI' '0133'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'RC29P-EKORG' ' '.
WHEN 'D'.
PERFORM bdc_field USING 'RC29P-DOKNR' i_stpo-doknr.
PERFORM bdc_field USING 'RC29P-DOKAR' i_stpo-dokar.
* next screen
PERFORM item_text_insert.
* When POSTP = X, L.
WHEN OTHERS.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29P-AUSCH'.
PERFORM bdc_field USING 'RC29P-AUSCH' i_bom-ausch.
* next screen
PERFORM item_text_insert.
ENDCASE.
g_counter = g_counter + 1.
* next screen
PERFORM bdc_dynpro USING 'SAPLCSDI' '0140'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29P-POSNR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE' '=FCBU'.
AT END OF matnr.
PERFORM insert_bdc_new.
ENDAT.
ENDLOOP.
CLEAR i_bom[].
PERFORM close_bdc_session.
** Release the BDC sessions created
PERFORM release_bdc.
ENDIF.
ENDFORM. " open_group
*& Form bdc_dynpro_start
* Initialize the screen
* -->P_G_PROGRAM_1
* -->P_G_SCREEN
FORM bdc_dynpro USING p_g_program_1
p_g_screen.
CLEAR i_bdc_table.
i_bdc_table-program = p_g_program_1.
i_bdc_table-dynpro = p_g_screen.
i_bdc_table-dynbegin = 'X'.
APPEND i_bdc_table.
ENDFORM. " bdc_dynpro_start
*& Form bdc_field
* Insert field *
FORM bdc_field USING f_name f_value.
CLEAR i_bdc_table.
i_bdc_table-fnam = f_name.
i_bdc_table-fval = f_value.
APPEND i_bdc_table.
ENDFORM. "bdc_insert_field
*& Form open_bdc_session
* Open the BDC session
FORM open_bdc_session .
** Open BDC session and creat and update condition records
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
* DEST = FILLER8
group = p_group
* HOLDDATE = FILLER8
keep = 'X'
user = sy-uname
* RECORD = FILLER1
* PROG = SY-CPROG
* IMPORTING
* QID =
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " create_bdc_session
*& Form insert_screen_header
* Insert the Header data into the screens
FORM insert_screen_header .
g_counter = 1.
PERFORM bdc_dynpro USING 'SAPLCSDI' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29N-STLAL'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'RC29N-MATNR' g_my_rec_in-matnr.
PERFORM bdc_field USING 'RC29N-WERKS' g_my_rec_in-werks.
PERFORM bdc_field USING 'RC29N-STLAN' g_my_rec_in-stlan.
PERFORM bdc_field USING 'RC29N-STLAL' g_my_rec_in-stlal.
PERFORM bdc_field USING 'RC29N-DATUV' g_my_rec_in-datuv.
* next screen
PERFORM bdc_dynpro USING 'SAPLCSDI' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29K-BMENG'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'RC29K-STKTX' g_my_rec_in-stktx.
PERFORM bdc_field USING 'RC29K-BMENG' g_my_rec_in-bmeng.
*next screen
PERFORM bdc_dynpro USING 'SAPLCSDI' '0111'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29K-LABOR'.
ENDFORM. " insert_screen_header
*& Form insert_bdc
* Insert the BDC session
FORM insert_bdc_new .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = 'CS01'
* POST_LOCAL = NOVBLOCAL
* PRINTING = NOPRINT
* SIMUBATCH = ' '
* CTUPARAMS = ' '
TABLES
dynprotab = i_bdc_table
EXCEPTIONS
internal_error = 1
not_open = 2
queue_error = 3
tcode_invalid = 4
printing_invalid = 5
posting_invalid = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR i_bdc_table[].
ENDFORM. " insert_bdc
*& Form close_bdc_session
* Close the BDC session
FORM close_bdc_session .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " close_bdc_session
*& Form f_load_input_file
* Load the file into the Internal table
FORM f_load_input_file.
IF p_rloc1 = zc_yes.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_fname1
filetype = 'DAT'
TABLES
data_tab = i_bom
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
STOP.
ENDIF.
ENDIF.
ENDFORM. " f_load_input_file
*& Form release_bdc
* Release BDC session
FORM release_bdc.
SUBMIT rsbdcsub WITH mappe EQ p_group
WITH von EQ sy-datum
WITH bis EQ sy-datum
WITH fehler EQ '.'
EXPORTING LIST TO MEMORY
AND RETURN.
ENDFORM. " release_bdc
*& Form item_text_insert
* Repetitive code in the screen flow
FORM item_text_insert.
PERFORM bdc_dynpro USING 'SAPLCSDI' '0131'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29P-POTX1'.
PERFORM bdc_field USING 'RC29P-POTX1' i_bom-potx1.
ENDFORM. " item_text_insert -
Hi ALL i have a BDC code it is not working properly
this BDC code is not working properly , when ever the file is transfering BDC is aborting in the case of invalid material/batch comes into teh picture... so please could you ''Check for invalid material/batch combinations so they are not processed by the BDC in the program and correctly output in an exception report''
*****************************CODE HERE*****************************
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_fileHi,
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
<b>select single MATNR
WERKS
CHARG
from MCHA
into (l_matnr, l_werks, l_charg)
where matnr = w_stck_cnt-matnr
and werks = w_stck_cnt-werks.
and charg = w_stck_cnt-charg.
if sy-subrc ne 0.
continue.
endif.</b>
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_file
Best regards,
Prashant -
How to use bdc code in a report for save button
hi to all can anybody please give some hints that how can i place the BDC code for the save button to pass the values from the editable grid to the standard table here i am sending my code .please advice me.
Moderator Message: Please post only relevant portions of your code. There is a 2,500 character per post limit.
here the second grid is editable.and i have to make changes in the second grid and save it to the standard tables. please advice me resma
Edited by: kishan P on Sep 13, 2010 3:59 PMHi,
I have done that many times. Create a button in the toolbar,say 'SAVE'. Write the code in the subroutine user command.For example :
*& Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
DATA : REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: L_VALID TYPE C.
*Code to reflect the changes done in the internal table
IF REF_GRID IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA
IMPORTING
E_VALID = L_VALID.
ENDIF.
CASE SY-UCOMM.
WHEN 'SAVE'.
PERFORM BDC."Write all you BDC code in this subroutine
ENDCASE.
ENDFORM.
Hope this will help.
Thanks & Regards,
Rock. -
RFC enabled function module is not runing the BDC code in it.
Dear Experts,
1. We have created a RFC enabled function module to change status of a activity and to save it we are using BDC code and we have also put the code in the RFC FM only.
The RFC fm is runing fine and changing the data and also saving it by runing the BDC when run in the R/3 system only.
But when i run the FM from portal its just chaning the status but not runing the BDC code in it.
below i am puting the code of the FM.
FUNCTION ZRFC_CRM_STATUS_CHANGE_EXTERN .
""Local Interface:
*" IMPORTING
*" VALUE(CHECK_ONLY) TYPE XFELD DEFAULT ' '
*" VALUE(CLIENT) LIKE SY-MANDT DEFAULT SY-MANDT
*" VALUE(OBJNR) TYPE CRM_JSTO-OBJNR OPTIONAL
*" VALUE(USER_STATUS) LIKE CRM_JEST-STAT
*" VALUE(SET_INACT) TYPE XFELD DEFAULT ' '
*" VALUE(SET_CHGKZ) LIKE CRM_JSTO-CHGKZ OPTIONAL
*" VALUE(XNOAUTO) LIKE CRM_JSTO_UPD-XNOAUTO OPTIONAL
*" VALUE(NO_CHECK) TYPE XFELD DEFAULT ' '
*" VALUE(ZOBJNR) TYPE CHAR80
*" VALUE(OBJECT_ID) TYPE CRMT_OBJECT_ID
*" EXPORTING
*" VALUE(STONR) LIKE TJ30-STONR
*" EXCEPTIONS
*" OBJECT_NOT_FOUND
*" STATUS_INCONSISTENT
*" STATUS_NOT_ALLOWED
*{ INSERT D60K900707 1
DATA: BEGIN OF JSTAT_TMP.
INCLUDE STRUCTURE JSTAT.
DATA: END OF JSTAT_TMP.
data: bdcdata like bdcdata occurs 0 with header line.
data: dire type CRMD_ACTIVITY_H-direction.
CLEAR: DIRE.
OBJNR = ZOBJNR.
MANDT = CLIENT.
JSTAT_TMP-STAT = USER_STATUS.
JSTAT_TMP-INACT = SET_INACT.
IF USER_STATUS+0(1) NE EXTERN.
RAISE STATUS_NOT_ALLOWED.
ENDIF.
Statusobjekt ggf. einlesen
PERFORM STATUS_READ USING OBJNR IOBTYP ISTSMA NOT_FOUND.
CHECK NOT_FOUND = OFF.
ggf. Änderungsbelege aktivieren
IF SET_CHGKZ = 'X' AND JSTO_BUF-CHGKZ = SPACE AND CHECK_ONLY = SPACE.
PERFORM SET_CHGKZ USING OBJNR.
ENDIF.
set XNOAUTO-flag if desired
IF XNOAUTO = 'X' AND CHECK_ONLY = SPACE.
PERFORM SET_XNOAUTO USING OBJNR.
ENDIF.
crm_jostd-OBJNR = OBJNR.
Status-Puffer füllen
REFRESH JEST_BUF_A.
REFRESH JEST_BUF_E.
CLEAR JEST_BUF_A.
CLEAR JEST_BUF_E.
CLEAR JEST_K.
MOVE MANDT TO JEST_K-MANDT.
MOVE crm_jostd-OBJNR TO JEST_K-OBJNR.
READ TABLE JEST_BUF WITH KEY JEST_K BINARY SEARCH.
IF SY-SUBRC IS INITIAL.
TABIX = SY-TABIX.
MOVE-CORRESPONDING JEST_BUF TO JEST_BUF_E.
APPEND JEST_BUF_E.
MOVE-CORRESPONDING JEST_BUF TO JEST_BUF_A.
MOVE MANDT TO JEST_BUF_A-MANDT.
APPEND JEST_BUF_A.
DO.
ADD 1 TO TABIX.
READ TABLE JEST_BUF INDEX TABIX.
IF SY-SUBRC IS INITIAL AND JEST_BUF-OBJNR = crm_jostd-OBJNR.
MOVE-CORRESPONDING JEST_BUF TO JEST_BUF_E.
APPEND JEST_BUF_E.
MOVE-CORRESPONDING JEST_BUF TO JEST_BUF_A.
MOVE MANDT TO JEST_BUF_A-MANDT.
APPEND JEST_BUF_A.
ELSE.
EXIT.
ENDIF.
ENDDO.
ENDIF.
g_no_check = no_check.
OBJNR = ZOBJNR.
PERFORM STATUS_CHANGE_EXTERN USING CHECK_ONLY
OBJNR
JSTAT_TMP
EXTERN.
clear g_no_check.
Zurückschreiben in Puffer
PERFORM CHG_JEST_BUF_E.
ggf. Statusordnungsnummer ermitteln
IF STONR IS REQUESTED.
CALL FUNCTION 'CRM_STATUS_READ'
EXPORTING
OBJNR = OBJNR
ONLY_ACTIVE = 'X'
IMPORTING
STONR = STONR.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN =
*COMMIT WORK.
wait up to 10 seconds.
CLEAR bdcdata.
bdcdata-program = 'SAPLCRM_1O_MANAG_UI'.
bdcdata-dynpro = '0100'.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
CLEAR bdcdata.
bdcdata-fnam = 'BDC_OKCODE'.
bdcdata-fval = '=READ'.
APPEND bdcdata.
CLEAR bdcdata.
bdcdata-program = 'SAPLCRM_1O_MANAG_UI'.
bdcdata-dynpro = '0510'.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
CLEAR bdcdata.
bdcdata-fnam = 'BDC_CURSOR'.
bdcdata-fval = 'GV_OBJECT_ID'.
APPEND bdcdata.
CLEAR bdcdata.
bdcdata-fnam = 'GV_OBJECT_ID'.
bdcdata-fval = OBJECT_ID.
APPEND bdcdata.
CLEAR bdcdata.
bdcdata-fnam = 'BDC_OKCODE'.
bdcdata-fval = '=OKAY'.
APPEND bdcdata.
CLEAR bdcdata.
bdcdata-program = 'SAPLCRM_1O_MANAG_UI'.
bdcdata-dynpro = '0100'.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
CLEAR bdcdata.
bdcdata-fnam = 'BDC_OKCODE'.
bdcdata-fval = '=1OMAIN_TT'.
APPEND bdcdata.
CLEAR bdcdata.
bdcdata-program = 'SAPLCRM_1O_MANAG_UI'.
bdcdata-dynpro = '0100'.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
CLEAR bdcdata.
bdcdata-fnam = 'BDC_CURSOR'.
bdcdata-fval = 'CRMT_7010_ACTIVITY_UI-DIRECTION'.
APPEND bdcdata.
select single direction from CRMD_ACTIVITY_H into dire
where guid = objnr.
if sy-subrc = 0.
if dire = '0'.
dire = '1'.
elseif dire = '1'.
dire = ''.
elseif dire is initial.
dire = '1'.
endif.
endif.
CLEAR bdcdata.
bdcdata-fnam = 'CRMT_7010_ACTIVITY_UI-DIRECTION'.
bdcdata-fVAL = DIRE.
APPEND bdcdata.
CLEAR bdcdata.
bdcdata-fnam = 'BDC_OKCODE'.
bdcdata-fval = '=SAVE'.
APPEND bdcdata.
CALL TRANSACTION 'CRMD_BUS2000126' using bdcdata mode 'N'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN =
*COMMIT WORK.
wait up to 5 seconds.
*} INSERT
ENDFUNCTION.
Thanks and regards
NeelDear experts,
Already the FM is RFC enabled other i won't be able to call it from portal
and coming to using the BAPI_ACTIVITY CHANGE fm that acting very weird so we are using the CRM EXTERN CHANGE USER STATUS fm which is working fine but the only problem is even when we comit from BAPI_TRANSACTION_COMMIT its not getting the delta queue of BW updated eventhough its chaning the status.
So for the above reasons we are using the BDC code in the FM for pressing the save button then its will update the changes to BW delta queue as well.
its working fine when i run it from the system in tcode SE37 only the BDC code is not runing when i am doing it from portal apart from the fm is chaning the status .
thanks and regards
Neel -
BDC code for the XD01 and VD01
Hello Masters,
I am new to SAP-ABAP,could anyone help me to get the BDC code to update the customer master data by using the t.code XD01 and VD01.
Thanks
Varsha.SESSION METHOD
report YARINSESSIONBDC2 no standard page heading line-size 255.
data: bdcdata like bdcdata occurs 0 with header line.
data: session like apqi-groupid value 'yar1'.
data: begin of itab occurs 0,
kunnr like lfa1-kunnr,
name1 like lfa1-name1,
pstlz like lfa1-pstlz,
end of itab.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'D:\naser.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = '|'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = SESSION
HOLDDATE = FILLER8
KEEP = FILLER1
USER = SY-UNAME
RECORD = FILLER1
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DO.
perform fill_bdc_tab.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'XD02'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
TABLES
DYNPROTAB = BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDDO.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*include bdcrecx1.
*start-of-selection.
*perform open_group.
*& Form fill_bdc_tab
text
--> p1 text
<-- p2 text
FORM fill_bdc_tab.
clear bdcdata.
refresh bdcdata.
perform bdc_dynpro using 'SAPMF02D' '0101'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-D0110'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02D-KUNNR'
itab-kunnr.
perform bdc_field using 'RF02D-BUKRS'
'0001'.
perform bdc_field using 'RF02D-D0110'
'X'.
perform bdc_dynpro using 'SAPMF02D' '0110'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-PSTLZ'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'KNA1-ANRED'
'Company'.
perform bdc_field using 'KNA1-NAME1'
itab-name1.
perform bdc_field using 'KNA1-PFACH'
'GPO'.
perform bdc_field using 'KNA1-ORT01'
'7000091'.
perform bdc_field using 'KNA1-PSTLZ'
itab-pstlz.
perform bdc_field using 'KNA1-PSTL2'
'123456'.
perform bdc_field using 'KNA1-LAND1'
'IN'.
perform bdc_field using 'KNA1-SPRAS'
'EN'.
*perform bdc_transaction using 'XD02'.
*perform close_group.
append bdcdata.
ENDFORM. " fill_bdc_tab
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDIF.
ENDFORM.
Reward if useful
Regards
ANUPAM -
Hi,
Can anybody please tell the BDC CODE FOR A PUSH BUTTON.
THANKS IN ADVANCEwhich program? which pushbutton?
-
BDC Code for Loan to Employees
Dear Friends,
I have to write a BDC where I have to debit the G/L of Empoyee Loan and credit individual employee accounts.
If you have a similar BDC code available with you please share the same with me.
Regards,
Alok.hi
First go to tcode SHDB, there select new recording,give a name for the recording and then give the tcode for which u would want to do recording. Now, enter all the values in the tcode completely and then save it.
Now, come back to shdb,..select ur recording and say create a program tab. Select option from the recording aand then save the program..save the program.
Now, upload the flat file from PC using GUI_upload for txt file and ALSM_EXCEL_TO_INTERNAL_TABLE..
Now, pass the internal table values to the perform statements or subroutines and put them in a loop.
Regards,
Vishwa. -
Hi all,
Can anyone of you provide me complete BDC code for Transaction XD01.
An early reply will be highly appreciated and would be rewarded.
Regards,
NeerajHi Prakash
hope this code will help you.
ABAP BDC SAMPLE CODE XD01
Table/Structure declarations. *
TABLES : KNA1. "Customer master
Constants declarations. *
CONSTANTS : C_MODE VALUE 'A',
C_UPDATE VALUE 'S',
C_X VALUE 'X',
C_SESS TYPE APQI-GROUPID VALUE 'ZCUSTOMER', "Session Name
C_XD01 LIKE TSTC-TCODE VALUE 'XD01'.
Variable declarations. *
DATA : V_FNAME(15) VALUE SPACE, " Name of file to be created
V_FAILREC TYPE I, " No of failed records
V_MSG(255), " Message Text
V_ERRREC TYPE I, " No of failed records
V_LINES TYPE I, " No of records
V_BANKS(15), " Table column BANKS
V_BANKL(15), " Table column BANKL
V_BANKN(15), " Table column BANKN
V_TIDX(2) TYPE N. " Table row index
*-- FLAG DECLARATIONS
DATA : FG_DATA_EXIST VALUE 'X', " Check for data
FG_SESSION_OPEN VALUE ' '. " Check for Session Open
*-- MACRO DEFINITIONS
*-- Macro for BANKS
DEFINE BANKS.
CLEAR V_BANKS.
CONCATENATE 'KNBK-BANKS(' &1 ')' INTO V_BANKS.
CONDENSE V_BANKS.
END-OF-DEFINITION.
*-- Macro for BANKL
DEFINE BANKL.
CLEAR V_BANKL.
CONCATENATE 'KNBK-BANKL(' &1 ')' INTO V_BANKL.
CONDENSE V_BANKL.
END-OF-DEFINITION.
*-- Macro for BANKN
DEFINE BANKN.
CLEAR V_BANKN.
CONCATENATE 'KNBK-BANKN(' &1 ')' INTO V_BANKN.
CONDENSE V_BANKN.
END-OF-DEFINITION.
Structures / Internal table declarations *
*-- Structure to hold BDC data
TYPES : BEGIN OF T_BDCTABLE.
INCLUDE STRUCTURE BDCDATA.
TYPES END OF T_BDCTABLE.
*-- Structure to trap BDC messages
TYPES : BEGIN OF T_MSG.
INCLUDE STRUCTURE BDCMSGCOLL.
TYPES : END OF T_MSG.
*-- Structure to trap ERROR messages
TYPES : BEGIN OF T_ERR_MSG,
MESSAGE(255),
END OF T_ERR_MSG.
*--Internal table to store flat file data
DATA : BEGIN OF IT_KNA1 OCCURS 0,
KUNNR LIKE KNA1-KUNNR,
KTOKD LIKE T077D-KTOKD,
NAME1 LIKE KNA1-NAME1,
SORTL LIKE KNA1-SORTL,
ORT01 LIKE KNA1-ORT01,
PSTLZ LIKE KNA1-PSTLZ,
LAND1 LIKE KNA1-LAND1,
SPRAS LIKE KNA1-SPRAS,
LZONE LIKE KNA1-LZONE,
END OF IT_KNA1.
*--Internal table to store bank details
DATA : BEGIN OF IT_BANK OCCURS 0,
BANKS LIKE KNBK-BANKS,
BANKL LIKE KNBK-BANKL,
BANKN LIKE KNBK-BANKN,
END OF IT_BANK.
*-- Internal table to hold BDC data
DATA: IT_BDCDATA TYPE STANDARD TABLE OF T_BDCTABLE WITH HEADER LINE,
*-- Internal Table to store ALL messages
IT_MSG TYPE STANDARD TABLE OF T_MSG WITH HEADER LINE,
*-- Internal Table to store error messages
IT_ERR_MSG TYPE STANDARD TABLE OF T_ERR_MSG WITH HEADER LINE.
Selection Screen. *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FLNAME(15) OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R_LIST RADIOBUTTON GROUP GRP1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003.
PARAMETERS : R_SESS RADIOBUTTON GROUP GRP1.
SELECTION-SCREEN COMMENT 30(20) TEXT-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
Event:Initialization *
INITIALIZATION.
AT Selection Screen. *
AT SELECTION-SCREEN.
Event: Start-of-Selection *
START-OF-SELECTION.
V_FNAME = P_FLNAME.
PERFORM GET_DATA.
PERFORM GET_BANKDATA.
PERFORM GENERATE_DATASET.
Event: End-of-Selection *
END-OF-SELECTION.
IF FG_DATA_EXIST = ' '.
MESSAGE I010 WITH TEXT-009.
EXIT.
ENDIF.
PERFORM GENERATE_BDCDATA.
PERFORM DISPLAY_ERR_RECS.
Event: top-of-page
TOP-OF-PAGE.
FORM DEFINITIONS *
*& Form get_data
Subroutine to get the data from mard
--> p1 text
<-- p2 text
FORM GET_DATA.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = 'C:\XD01.TXT'
FILETYPE = 'DAT'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
DATA_TAB = IT_KNA1
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF IT_KNA1[] IS INITIAL.
FG_DATA_EXIST = ' '.
ENDIF.
ENDFORM. " get_data
*& Form GENERATE_DATASET
text
--> p1 text
<-- p2 text
FORM GENERATE_DATASET.
MESSAGE I010 WITH 'OPENING FILE IN APPLICATION SERVER'.
**--Creating a data set in application server
OPEN DATASET V_FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
**---Transfering data from internal table to dataset
MESSAGE I010 WITH 'TRANSFERING DATA FROM INETERAL TABLE TO THE FILE'.
LOOP AT IT_KNA1.
TRANSFER IT_KNA1 TO V_FNAME.
ENDLOOP.
**--Closing the dataset
MESSAGE I010 WITH 'CLOSING THE FILE'.
CLOSE DATASET V_FNAME.
ENDFORM. " GENERATE_DATASET
*& Form BDC_DYNPRO
text
-->P_0467 text
-->P_0468 text
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
*& Form BDC_FIELD
text
-->P_0472 text
-->P_0473 text
FORM BDC_FIELD USING FNAM FVAL.
IF NOT FVAL IS INITIAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDIF.
ENDFORM.
*& Form GENERATE_BDCDATA
text
--> p1 text
<-- p2 text
FORM GENERATE_BDCDATA.
REFRESH IT_KNA1.
Opening dataset for reading
OPEN DATASET V_FNAME FOR INPUT IN TEXT MODE ENCODING DEFAULT.
Reading the file from application server
DO.
CLEAR: IT_KNA1,IT_BDCDATA.
REFRESH IT_BDCDATA.
READ DATASET V_FNAME INTO IT_KNA1.
IF SY-SUBRC <> 0.
EXIT.
ELSE.
Populate BDC Data for Initial Screen
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0100',
BDC_FIELD USING 'BDC_CURSOR' 'RF02D-KUNNR',
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_FIELD USING 'RF02D-KUNNR' IT_KNA1-KUNNR,
BDC_FIELD USING 'RF02D-KTOKD' IT_KNA1-KTOKD.
Populate BDC Data for Second Screen
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0110',
BDC_FIELD USING 'BDC_CURSOR' 'KNA1-NAME1',
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_FIELD USING 'KNA1-NAME1' IT_KNA1-NAME1,
BDC_FIELD USING 'KNA1-SORTL' IT_KNA1-SORTL,
BDC_FIELD USING 'KNA1-ORT01' IT_KNA1-ORT01,
BDC_FIELD USING 'KNA1-PSTLZ' IT_KNA1-PSTLZ,
BDC_FIELD USING 'KNA1-LAND1' IT_KNA1-LAND1,
BDC_FIELD USING 'KNA1-SPRAS' IT_KNA1-SPRAS.
Populate BDC Data for Third Screen
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0120',
BDC_FIELD USING 'BDC_CURSOR' 'KNA1-LZONE',
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_FIELD USING 'KNA1-LZONE' IT_KNA1-LZONE.
Populate BDC Data for Fourth Screen
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0125',
BDC_FIELD USING 'BDC_CURSOR' 'KNA1-NIELS',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
Populate BDC Data for Table control for bank details.
V_TIDX = '01'.
LOOP AT IT_BANK.
BANKS V_TIDX.
BANKL V_TIDX.
BANKN V_TIDX.
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0130',
BDC_FIELD USING 'BDC_CURSOR' V_BANKN,
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_FIELD USING V_BANKS IT_BANK-BANKS,
BDC_FIELD USING V_BANKL IT_BANK-BANKL,
BDC_FIELD USING V_BANKN IT_BANK-BANKN.
V_TIDX = V_TIDX + 1.
ENDLOOP.
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0130',
BDC_FIELD USING 'BDC_CURSOR' V_BANKS,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
CALL TRANSACTION C_XD01 USING IT_BDCDATA
MODE C_MODE
UPDATE C_UPDATE
MESSAGES INTO IT_MSG.
IF SY-SUBRC <> 0.
*--In case of error list display
IF R_LIST = C_X.
V_ERRREC = V_ERRREC + 1.
PERFORM FORMAT_MESSAGE.
IT_ERR_MSG-MESSAGE = V_MSG.
APPEND IT_ERR_MSG.
CLEAR : V_MSG,IT_ERR_MSG.
ENDIF.
*--In case of session log
IF R_SESS = C_X.
*-- In case of transaction fails.
IF FG_SESSION_OPEN = ' '.
FG_SESSION_OPEN = C_X.
PERFORM BDC_OPEN_GROUP.
ENDIF. " IF FG_SESSION_OPEN = ' '.
*-- Insert BDC Data..
PERFORM BDC_INSERT_DATA.
ENDIF. " IF R_SESS = C_X.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF SY-SUBRC <> 0.
ENDDO.
Closing the dataset
CLOSE DATASET V_FNAME.
*-- Close the session if opened
IF FG_SESSION_OPEN = C_X.
PERFORM BDC_CLOSE_GROUP.
CALL TRANSACTION 'SM35'.
ENDIF.
ENDFORM. " GENERATE_BDCDATA
*& Form BDC_OPEN_GROUP
text
--> p1 text
<-- p2 text
FORM BDC_OPEN_GROUP.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = C_SESS
HOLDDATE = FILLER8
KEEP = C_X
USER = SY-UNAME
RECORD = FILLER1
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BDC_OPEN_GROUP
*& Form BDC_INSERT_DATA
text
--> p1 text
<-- p2 text
FORM BDC_INSERT_DATA.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = C_XD01
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BDC_INSERT_DATA
*& Form BDC_CLOSE_GROUP
text
--> p1 text
<-- p2 text
FORM BDC_CLOSE_GROUP.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BDC_CLOSE_GROUP
*& Form FORMAT_MESSAGE
text
--> p1 text
<-- p2 text
FORM FORMAT_MESSAGE.
CLEAR V_LINES.
DESCRIBE TABLE IT_MSG LINES V_LINES.
READ TABLE IT_MSG INDEX V_LINES.
CLEAR V_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MSG-MSGID
LANG = IT_MSG-MSGSPRA
NO = IT_MSG-MSGNR
V1 = IT_MSG-MSGV1
V2 = IT_MSG-MSGV2
V3 = IT_MSG-MSGV3
V4 = IT_MSG-MSGV4
IMPORTING
MSG = V_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " FORMAT_MESSAGE
*& Form DISPLAY_ERR_RECS
text
--> p1 text
<-- p2 text
FORM DISPLAY_ERR_RECS.
LOOP AT IT_ERR_MSG.
WRITE: / IT_ERR_MSG-MESSAGE.
ENDLOOP.
ENDFORM. " DISPLAY_ERR_RECS
*& Form GET_BANKDATA
text
--> p1 text
<-- p2 text
FORM GET_BANKDATA.
IT_BANK-BANKS = 'AD'.
IT_BANK-BANKL = '1000'.
IT_BANK-BANKN = 'S.B A/C'.
APPEND IT_BANK.
IT_BANK-BANKS = 'AD'.
IT_BANK-BANKL = 'CITY'.
IT_BANK-BANKN = 'CURR. A/C'.
APPEND IT_BANK.
IT_BANK-BANKS = 'AD'.
IT_BANK-BANKL = 'H001'.
IT_BANK-BANKN = 'S.B A/C'.
APPEND IT_BANK.
reward if help. -
Problem while writing BDC Code......
Hi All,
I am writing a BDC Code to call transaction: PRFI.
Ones the transaction is run(from GUI directly) for a particular trip number, the status of the trip gets changed to Docs Created. On the other hand while doing the same using the BDC method, the status that is getting generated is: Selection is Running.
It looks as if the transaction is not getting committed properly.
I am writing the BDC very correctly and also screen sequences are trapped properly.
Please help.
Abhi.
Edited by: Digvijay Sharma on Jul 29, 2010 12:14 PMHi,
You saying that all screens and flow logic will be written properly.
use SHDB for recording that transaction then compare each Dynpro and all the things.
It will be helpful for you. -
Dear experts,
We have DEV client 150,250. Dev occurs on 150.It has very less data and not configured.
Client 250 has enough data and configured at par with PRD.
Now i want to generate a BDC code for F-02 posting.
In 150 i cannot complete the cycle becuase it is not configured.In 250 i cannot again because
it has no authorization for writing code it says 'SAP system has status not modifiable.'
But i can complete BDC cycle of recording only in 250.
Waiting for your recommendations.The error message sounds a bit like you're trying to generate a program for a recorded BDC in your non-dev client.
Here's what you should do: Do a BDC recording via transaction SHDB in your non-dev client. Then once you are back from the recording and on the screen where you see all your processed screens and fields (windows title starts with something like <i>Transaction Recorder: Change recording...</i>), you will see at the top right a button for exporting the recording to your presentation server as a text file.
So save the recording on your PC and then log into the dev client. Here start to also record a BDC session, but just do a dummy one (i.e. enter any transaction code and immediately go back). So once you're back on the screen with the recorded screens and field values, choose the import button to upload your saved session.
Now you have the saved session in your dev client and you can generate programs or whatever you want to do there.
Cheers, harald -
BDC code for MB01 Application(Multiple Line Items)
Hi,
Can anybody please send me the BDC CODE for MB01 Application(for Multiple Line items).
Very urgent.
Thanks And Regards,
AjayInstead of BDC you can use following BAPI.
see the following ex:
BAPI TO Upload Inventory Data
GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
02 - MB31 - Goods Receipts for Prod Order
03 - MB1A - Goods Issue
04 - MB1B - Transfer Posting
05 - MB1C - Enter Other Goods Receipt
06 - MB11
Domain: KZBEW - Movement Indicator
Goods movement w/o reference
B - Goods movement for purchase order
F - Goods movement for production order
L - Goods movement for delivery note
K - Goods movement for kanban requirement (WM - internal only)
O - Subsequent adjustment of "material-provided" consumption
W - Subsequent adjustment of proportion/product unit material
LOOP AT I_TAB.
count = sy-tabix.
SELECT SINGLE * FROM ZMM_GI_WIP
WHERE GI_NO = I_TAB-DOCNO AND
GI_DATE = I_TAB-DOCDT.
IF SY-SUBRC = 0.
I_TAB-FLAG = 'C'.
modify i_tab index count.
CONCATENATE 'ERROR GI : ' I_TAB-DOCNO
' WAS ALREADY UPLOADED' INTO I_MSG1.
APPEND I_MSG1.
CLEAR I_TAB-FLAG.
CONTINUE.
ELSE.
CONCATENATE I_TAB-DOCDT+4(2)
I_TAB-DOCDT+6(2)
I_TAB-DOCDT+2(2)
I_TAB-DOCDT+0(2)
INTO G_DATE.
gmhead-pstng_date = G_DATE.
gmhead-doc_date = sy-datum.
gmhead-pr_uname = sy-uname.
"01 - MB01 - Goods Receipts for Purchase Order
gmcode-gm_code = '03'.
refresh itab.
clear itab.
SORT I_MAIN BY SOL_DOCNO.
LOOP AT I_MAIN WHERE DOCNO = I_TAB-DOCNO.
IF I_MAIN-GI_TXN_TYPE = 'MGI'.
itab-move_type = '291'.
ENDIF.
itab-mvt_ind = ' '.
itab-plant = I_MAIN-WERKS.
itab-material = I_MAIN-MATNR.
itab-entry_qnt = I_MAIN-ERFMG.
itab-stge_loc = I_MAIN-LGOBE.
itab-ENTRY_UOM = I_MAIN-ERFME.
IF I_MAIN-WERKS = 'MR'.
itab-TR_PART_BA = '11'.
ELSEIF I_MAIN-WERKS = 'MR'.
itab-TR_PART_BA = '12'.
ENDIF.
append itab.
ENDLOOP.
if not itab[] is initial.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gmhead
goodsmvt_code = gmcode
* TESTRUN = ' '
IMPORTING
goodsmvt_headret = mthead
* MATERIALDOCUMENT =
MATDOCUMENTYEAR =
tables
goodsmvt_item = itab
GOODSMVT_SERIALNUMBER =
return = errmsg.
clear errflag.
loop at errmsg.
if errmsg-type eq 'E'.
write:/'Error in function', errmsg-message.
errflag = 'X'.
else.
write:/ errmsg-message.
endif.
move errmsg-message to i_msg1.
append i_msg1.
endloop.
if errflag is initial.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
commit work and wait.
if sy-subrc ne 0.
write:/ 'Error in updating'.
exit.
endif.
endif.
ENDIF.
wait up to 20 seconds.
ENDLOOP. -
Hi All,,
Please give Entire BDC code for MM01 Transaction.
i will change as per my requirement.
I think this is already done by some ABAP Consultants.
plz dont give answers like do recording for that transaction MM01. I know recording...
For time constraiint, I have to complete soon.....
Thanks in Advance
BestRegards,
AnilHi,
The below code is using the Session Method
report ZDS_BDC_MM01
no standard page heading line-size 255.
include bdcrecx1.
*parameters: dataset(132) lower case.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record OCCURS 0,
* data element: MATNR
MATNR_001(018),
* data element: MBRSH
MBRSH_002(001),
* data element: MTART
MTART_003(004),
* data element: XFELD
KZSEL_01_004(001),
* data element: XFELD
KZSEL_02_005(001),
* data element: MAKTX
MAKTX_006(040),
* data element: MEINS
MEINS_007(003),
* data element: MAKTX
MAKTX_008(040),
end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME ='C:\DHRUV.TXT'
FILETYPE = 'DAT'
* HAS_FIELD_SEPARATOR = ' '
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = RECORD
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*do.
LOOP AT record.
*read dataset dataset into record.
if sy-subrc <> 0. exit. endif.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
record-MATNR_001.
perform bdc_field using 'RMMG1-MBRSH'
record-MBRSH_002.
perform bdc_field using 'RMMG1-MTART'
record-MTART_003.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-KZSEL_01_004.
perform bdc_field using 'MSICHTAUSW-KZSEL(02)'
record-KZSEL_02_005.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX_006.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
record-MEINS_007.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MAKT-MAKTX'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX_008.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM01'.
*enddo.
ENDLOOP.
perform close_group.
*perform close_dataset using dataset.
*Text elements
* E00 Error opening dataset, return code:
* I01 Session name
* I02 Open session
* I03 Insert transaction
* I04 Close Session
* I05 Return code =
* I06 Error session created
* S01 Session name
* S02 User
* S03 Keep session
* S04 Lock date
* S05 Processing Mode
* S06 Update Mode
* S07 Generate session
* S08 Call transaction
* S09 Error sessn
* S10 Nodata indicator
* S11 Short log
*Messages
* Message class: MS
*613 Please enter a session name and user name
The Below is the coding for the Call Transaction...
report ZDS_BDC_MM01_2
no standard page heading line-size 255.
*include bdcrecx1.
*parameters: dataset(132) lower case.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record OCCURS 0,
* data element: MATNR
MATNR_001(018),
* data element: MBRSH
MBRSH_002(001),
* data element: MTART
MTART_003(004),
* data element: XFELD
KZSEL_01_004(001),
* data element: MAKTX
MAKTX_005(040),
* data element: MEINS
MEINS_006(003),
* data element: MTPOS_MARA
MTPOS_MARA_007(004),
end of record.
DATA: FLNAME TYPE STRING.
*** End generated data section ***
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*** MESSAGE******
DATA: BEGIN OF MESSTAB OCCURS 0.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: MATNR TYPE MARA-MATNR,
END OF MESSTAB.
****END OF MESSAGE****
PARAMETERS: FILENAME TYPE RLGRAP-FILENAME.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILENAME.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = FILENAME.
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
FLNAME = FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FLNAME
FILETYPE = 'DAT'
* HAS_FIELD_SEPARATOR = ' '
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = record
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT record.
DATA:
CNT TYPE I.
CNT = CNT + 1.
REFRESH BDCDATA.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MTART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
record-MATNR_001.
perform bdc_field using 'RMMG1-MBRSH'
record-MBRSH_002.
perform bdc_field using 'RMMG1-MTART'
record-MTART_003.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-KZSEL_01_004.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX_005.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
record-MEINS_006.
perform bdc_field using 'MARA-MTPOS_MARA'
record-MTPOS_MARA_007.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
*perform bdc_transaction using 'MM01'.
CALL TRANSACTION 'MM01' USING BDCDATA
MODE 'N'
UPDATE 'A'
MESSAGES INTO MESSTAB.
READ TABLE MESSTAB INTO MESSTAB INDEX CNT.
IF MESSTAB-MSGTYP = 'E'.
MESSTAB-MATNR = RECORD-MATNR_001.
MODIFY MESSTAB INDEX CNT FROM MESSTAB. " TRANSPORTING MATNR.
ENDIF.
ENDLOOP.
FORM OPEN_GROUP.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING CLIENT = SY-MANDT
GROUP = 'MM01'
USER = SY-UNAME
KEEP = 'X'.
ENDFORM.
FORM BDC_INSERT.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'MM01'
* POST_LOCAL = NOVBLOCAL
* PRINTING = NOPRINT
* SIMUBATCH = ' '
* CTUPARAMS = ' '
TABLES
DYNPROTAB = BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
END-OF-SELECTION.
LOOP AT MESSTAB.
IF MESSTAB-MSGTYP = 'E'.
WRITE:/ 'ERROR OCCURED ON MATNR = ',MESSTAB-MATNR , 'MESSAGE : MATNR ALREADY EXISTS IN MARA!!!'.
ENDIF.
ENDLOOP.
perform close_group.
*perform close_dataset using dataset.
*& Form close_group
* text
* --> p1 text
* <-- p2 text
FORM close_group .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " close_group
*& Form bdc_dynpro
* text
* -->P_0270 text
* -->P_0271 text
FORM bdc_dynpro USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. " bdc_dynpro
*& Form bdc_field
* text
* -->P_0275 text
* -->P_0276 text
FORM bdc_field USING FNAM FVAL.
IF FVAL <> ' '.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDIF.
ENDFORM. " bdc_field
*Text elements
* E00 Error opening dataset, return code:
* I01 Session name
* I02 Open session
* I03 Insert transaction
* I04 Close Session
* I05 Return code =
* I06 Error session created
* S01 Session name
* S02 User
* S03 Keep session
* S04 Lock date
* S05 Processing Mode
* S06 Update Mode
* S07 Generate session
* S08 Call transaction
* S09 Error sessn
* S10 Nodata indicator
* S11 Short log
HTH
Regards,
Dhruv Shah
Maybe you are looking for
-
How do you reset your security question on App Store ?
I Have been trying to buy things on my Apple Store on my phone because I have $15.00 on the account but when I try to buy thing it asks for the security questions but I don't rememover the answers to them how do I reset my security questions with tha
-
InDesign CS5 won't launch - missing plug-ins
InDesign CS5 won't launch on Windows 7. I get the following error messages: Cannot load the LINKS.RPLN plug-in Cannot load the FONT USAGE DIALOG.RPLN plug-in Cannot load the XMEDIA UI.RPLN plug-in After these error messages InDesign crashes. Do I nee
-
6750 How can I get a ''Low Battery Alert'' from my...
I have recently bought a 6750. At one point I realized that my phone died without any warning. Went through the User Guide, nothing. Went through the phone and only found one thing under: >Settings > Tones > Other Tones, ON or OFF. I set it to ON. I
-
Print Shortcut does not use set Print Defaults
Hi there! I have a question regarding using the Print Command in Mac's version of Office. I will try my best to describe the issue. I have a user who wants his default print settings to include 1-sided printing. If he goes and sets up the feature l
-
How view and edit source code before publish to iWeb
I noted the following iWeb page plays music when it opens: http://homepage.mac.com/kkirkster/maya_test/ How does one change the source code in iWeb before it is published so that such a change as he did works in opening a blog page? Dennis Power Mac