BOM Display in CS11/CS12 with BOM status "3"

Hi,
Just wanted to know if it is possible to display BOM using CS11/CS12 with BOM status "3"- Active with history requirement.
Your quick reply is appreciated.
Thanks
Nitin
Edited by: Nitin Pandhare on Jun 16, 2011 10:16 AM

No, it doesn't display the BOM in CS11/CS12 which has BOM status '3' (Active with history requirement). It always give an error message " The BOM is not effective on current date" though the BOM exists in the system and has the history within the validity period. If you try, it also gives the same error message even if the BOM status is Inactive (2'). I guess it works only for the BOM, which has status "1" (Active).
May I request you to try at your end as well and let me know.
Thanks for your help and sharing your views.
Regards,
Nitin

Similar Messages

Cost of components display in CS11 /Cs12 / CS13 T.codes

Hi,
I want to display cost of the components in CS11 / CS12 / CS13 T.codes Std SAP will not display the cost of components. for this they have given note 177006 and asked to change some manual correction. In the post processing of the note they have asked put "your_display_profl" This is making me confusing I wanted know whether I want to create a new display pofile using CLVL t.code or can I make the correction as said by SAP "your_display_profl". Could some body guide me in this regard.
Regards
Ramana

HI
Check these reports for BOM Components and costs
CK79_99 Material: Itemization Comparison
K80_99 Material: Cost Components
CK84 Line Items in Cost Est for Product
CK84_99 Material: Itemization
CK86 Costed Multilevel BOM
CK86_99 Material: Multilevel BOM.
Also you can use this FM for developing reports,CS_BOM_EXPL_MAT_V2 provided X is included for the input parameter
Regards
Anupam Sharma

Need to Display Approvers name with approval status in PR

Hi,
We have a requirement to display the Approvers name with the approval status(for each Approve) in the purchase requisition. the developer has all the logic to achieve this and he said we cannot display this in the release strategy tab in PR but we can display the same in the tab- Customer data at the item level since it has more space. the user came back saying we should have this information in a new tab in PR with the name Approvers overview or else in any place in PR where the Buyers can easily identify where to find the list of approver names in the PR.we don't want to create a new custom tab just for this reason in the PR item. not sure whether we can really create one.
can you please let me know where can we display the Approvers name in the PR(item level)so that the users can easily identify those.
just wanted to know how is this handled in your company do you display the approvers name with release status any where in the PR, if yes where do you display?
Thanks
Mahendra

/* Formatted on 10/12/2011 9:57:19 AM (QP5 v5.149.1003.31008) */
WITH ADM_MENUS
        AS (SELECT 19 menu_id, NULL parent_menu_id, 10 seq_no FROM DUAL
            UNION
            SELECT 18, 19, 10 FROM DUAL
            UNION
            SELECT 20, 18, 30 FROM DUAL)
    SELECT menu_id,
           parent_menu_id,
           seq_no,
           CASE CONNECT_BY_ISLEAF
              WHEN 0
              THEN
                 REPLACE (SYS_CONNECT_BY_PATH (seq_no, ','), ',', '0')
              ELSE
                 SUBSTR (REPLACE (SYS_CONNECT_BY_PATH (seq_no, ','), ',', '0'),
                         LENGTH (SYS_CONNECT_BY_PATH (seq_no, ',')) - 5)
           END
              disp_seq_no
      FROM ADM_MENUS
START WITH parent_menu_id IS NULL
CONNECT BY PRIOR menu_id = parent_menu_id
19          10     010
18     19     10     010010
20     18     30     010030

Issue with BOM Status in MRP Run

Dear All,
I have a BOM structure and BOM status as attached below.
In this case, system is generating the PR's for all three components correctly while i run MRP (MD51). But when i convert planned order to production order for "Assembly" & "BOM", it is coping the components for Assembly correctly but not for "BOM".
If i maintain the BOM status as "4" for "BOM", then the components are copied into Production Order but i am getting double PR's as the BOM is exploding two times.
As per my requirement BOM should be exploded only one time ie. for "Assembly" and component should be come in Planned order for "BOM".
Please tell me where is the problem..
Regards,
Rao

Dear Rao,
assembly and Bom have the same type of production order?
In the production order type which application is contained? PP01?
You should check the explosion setting in the profile order and the setting of application of the Bom.
if you can send me screen shot of the planned order of the Bom (components details).
Thanks
Daniele

ECM - History Requirement for BOM status not activated

Hello,
He have an issue with the warning message displayed when we are trying to modificate an BOM (transaction CS02).
In OS25 transaction we defined that only BOMs with "usage = 1" and "status = 3" have history requirement.
The parameters of OS27 transaction are OK too.
The problem is that the warning message 045 is displayed when we execute CS02 for every kind of BOM usage and status.
We must substitute the warning message by an error message. To do that, we must disable the field NOHIS in C_STUE_NOH object, in the user profile. But, when we do that, the error message is displayed to all kind of BOMs status, blocking the process (following the warning message, which is displayed to all kind of BOM status)
This is an issue of SAP_APPL 470 system.
We tested the similar procedure in an SAP_APPL 603 system, and the results were OK, in other words, the warning message is only displayed for the BOM usage and BOM status defined in OS25 transaction.
Thank's in advance

When the BOM with usage 1 and status 3, by example, is changed with a modification number (following OS25 parameters), the field STZU-HISTK is activated.
Then, if the status of the BOM is changed to 2, the modification number is required, because the STZU-HISTK is activated.
In OS25 transaction only the BOm usage = 1 and BOM status = 3 has the history requirement flag, but after the modification with the mod. number, all the status of the BOM now has the modification number requirement.
How can I allow the modification of the BOM without modification number (other status not flagged in OS25), if this BOM hal already been changed with an modification number (by the status flagged in OS25)?
Thank's in advance

Function module needed to read all the BOM statuses

Dear Friends,
In a report we are using CS_BOM_EXPL_MAT_V2 function module to get the dispaly the BOMs. But it is displaying only the BOMs which are in Active stauts e.g 1 & 3.
My requirement is needs to read both active and inactive BOMs. Inactive BOM status is 2.
suggest me if there is any another FM or any another way to get all the BOM status materials.
Thanks for your help.
Srinivas.

You need to supply another application for alternative determination (field CAPID). It should be possible to customize one for your needs using "Define Order of Priority for BOM Usages" and "Define Applications" under "Production->Basic Data->Bill of Material->Alternative Determination"
Edited by: Carsten Grafflage on Aug 5, 2010 1:44 PM: Corrected one string from customizing - sorry.

BOM status change during material replacement

we use CSKB to create an order BOM. within the bom, we do a material replacement for one of the components, so that it's bom can also be modified. At the time of replacement, the material bom has a status of 1, but after copying to the sales order bom, the status is changed to 3. this causes history tracking to turn on for the sales order bom, and we dont want that.
is this change of status configured soemplace?
tia

I have found what i think to be th eproblem. the default bom status is set to 3, which is fine for a material BOM, but it appears it is also being used for the order bom.
so... i decided to implement a method in BOM_UPDATE BADI. I copied some code from another message on this site, as follows:
method if_ex_bom_update~change_at_save.
data: wstko type cs01_stkob.
data: name_tstko(30) value '(SAPLCSBT)O1-STPOB[]'.
field-symbols: <tstko> type table.
assign (name_tstko) to <tstko>.
read table <tstko> into wstko index 1.
if sy-subrc = 0.
* if an order bom at status 03, change it to status 01
    if wstko-stlty = 'K' and wstko-stlst = '03'.
      wstko-stlst = '01'.
      modify <tstko> from wstko index 1.
    endif.
endif.
endmethod.
The code compiles and executes fine, but the change is not made. i am guessing it has to do with the value in name_tstko, since that program is not even in my program stack when i save the bom (i put a breakpoint at the assign statement, and ran CSKB. I have tried various values based on the code that IS in my stack, and it simply short dumps, apparently unable to assign the names.
this could potentially fix my status issue (and a couple of other issues) if i can get it to work. any help is appreciated.
dave

BOM status

In bom header there is a field called as bom status, which is being used in case of mulitple bom inorder to make a particular bom active or inactive. In this field there is an option called as "active with history requirment", what is the use of this option.
RAJ

Hi Raj,
BOM status 3-Active with history requiremet means, changes done to BOM has to come through a Change number geerated in Engineering change management.
If the customization for the plant is ot active for history requirement, you can set a perticular material alone under change management purview by keeping the header status to 3.
By which whenever you chage the BOM of the header material, system throws a aring message saying , this BOM has history requiment indicator set, please enter change number.
Hope this helps...!
Regards,
Shashi

BOM STATUS only released for costing

Dear gurus ,
i need create a BOM STATUS only for CK11N ( COSTING) but when a created the new BOM STATUS whit only the flag "released for costing" but when i run the CK11N
the system don't find the bom .
Are there the other customzing setting?
Thanks a lot
Daniele Pistilli
PP TEAM

HI
Check with BOM usage 6 for your requirement.also check in OKKN for your costing variant and qty structure control> BOM application> selection Id for your BOM
Regards
Anupam Sharma

BOM Status in cs02

Hello Experts,
   I have need to change BOM Status in CS02 to be inactive when we save it .
The steps I do are :--
1. Goto CS02.enter material , plant BOM Usage
2. Click on header level ,and now whatever be the BOM status , but when we go to save it , the BOM status should be 2.
The function exits I used are :--
           1.EXIT_SAPLCSBT_001
           2. EXIT_SAPLCEB1_003
But , both are not triggering when I save my BOM .
So , I need your valuable guidance ,to solve this issue.
Regards,
Jeet

Hi,
Please try to implement method 'CHANGE_AT_SAVE' in BADI 'BOM_UPDATE' .
Hope it will work.
Thanks,
Leo

CS11,CS12,CS13

Hi Experts,
Why CS11,CS12,CS13 T codes are not showing the price control and the price in the ALV ?
Regds
Joe

Hi,
The setting of L_MBWLS is inside the program & not at user parameter level.
I would suggest create your custom report similar to CS11 / 12 / 13 & in that for the FM - CS_BOM_EXPL_MAT_V2 for field MBWLS pass the value 'X'. This will result in displaying the values. But do note that this will result in a relatively longer time for explosion depending on the bom size. This is what i have done at my end.
Regards,
Vivek

CS11 &CS12- Moving Price and standard price not appering for items

Dear Gurus,
CS11 &CS12- Moving Price and standard price not appering for items.
is it a bug for my system alone\.
or a bug overall in SAP itself.
Pls advise.
Siva

Dear Siva,
Its the standard functionality of SAP.
You will not get any cost related data in the reports like CS11,CS12,CS13.
You can try CK13N(which shows the components of the BOM along with the cost) or else CK86_99.
At Functional module level execute this one CS_BOM_EXPL_MAT_V2 and ensure X is included for the
input field MBWLS.
And also check these SAP notes 177006 and 686509.
Check and revert back.
Regards
Mangalraj.S

PPM with no status in APO

Hello,
I've have a material that is correctly maintained in R/3, with the routing, bom and production version. When I activate the integration model for it, the PPM is created in APO but with no active status!
I can activate it directly in APO, but the problem is that we have many materials with no status and we can't find the reason why.
Thanks for your help,
Miguel

Luis
Do you get any messages in the Application Log on the APO server (slg1) for the object CIF? Hopefully there may be some more clues there.

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

"The request failed with HTTP status 401: Unauthorized"

Hi,
I'm trying to get both RSS feeds and SSRS reports on a web application which is having NTLM authentication without Kerberos. The catch is proxy setting, if I give <proxy autoDetect="false" /> in web.config of my sharepoint web
application SSRS reports will be rendered in SQL Server Report viewer perfectly (I deploy using BIDS), but RSS viewer webpart will not display my internet feeds. If I give
<proxy autoDetect="true" /> RSS feeds are displayed properly but SSRS report will throw the following error.
The request failed with HTTP status 401: Unauthorized.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[WebException: The request failed with HTTP status 401: Unauthorized.]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +412862
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +300
Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.ListRenderingExtensions() +53
Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.ListRenderingExtensions() +207
Microsoft.Reporting.WebForms.ServerReport.ListRenderingExtensions() +130
Microsoft.ReportingServices.SharePoint.UI.WebParts.ActionMenu.OnPreRender(EventArgs e) +180
System.Web.UI.Control.PreRenderRecursiveInternal() +108
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3394
I tried to work around this by adding proxy settings with bypass list.
<system.net>
    <defaultProxy useDefaultCredentials="true">
      <proxy proxyaddress="http://<proxy IP address>:<port>" bypassonlocal="true" usesystemdefault="true" />
      <bypasslist>
  <add address="<my report server>" />
  <add address="http://<report server>:8080/reportserver/" />
  <add address="<IP of my report server>" />
      </bypasslist>
    </defaultProxy>
</system.net>
This makes RSS feed to work but SSRS throw the above error. I would need some advice from Microsoft on how to fix this.
Note: My sharepoint site cannot be anonymous. I have just once service account that runs sql server service, report service, sharepoint services etc. This account is local admin on all servers, has highest access on sql box, run SSRS web service and app
pools, etc.
I have four servers, 2 WFE in windows load balanced, 1 app server (running Central admin and report service in sharepoint integrated mode), 1 db server hosting all content and config dbs and report server db.
Regards,
Manoj
Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3618

Hi,
Thanks to share your post.
For the issue,
do you mean that the error happen with the use of NTLM authentication without Kerberos? If yes, the possible cause should be the lacking of Kerberos.
My suggestion is to implement the Kerberos authentication in your environment. You may check it and test it. For the detailed steps of implementing of the Kerberos:
http://blogs.msdn.com/b/martinkearn/archive/2007/04/23/configuring-kerberos-for-sharepoint-2007-part-1-base-configuration-for-sharepoint.aspx.
http://blogs.msdn.com/b/james_world/archive/2007/08/20/essential-guide-to-kerberos-in-sharepoint.aspx.
Hope this could help you!
Leo

BOM Display in CS11/CS12 with BOM status "3"

Similar Messages

Maybe you are looking for