BOM error
When I create a production order for a specific material, I recieve an error which says "No valid BOM exists" "Do you want to explose a BOM for a different material?"
When I check the BOM for the material under CS03, all the material components are present and available in stock. So the BOM is created with components, why is SAP telling me that no valid BOM exists when I try to create a production order?
>
Cameron wrote:
> Where would I find those at? T-codes and details please.
Cameron,
CS03 transaction Enter material number/ plant/ usage 1 and click the cap Icon. In admiin tab you can see valid from date
Regards,
Prasobh
Similar Messages
-
Hi,
I am trying to make the BOM error message BOM is recursive into a warning message. Is that possible to do ? I looked at the menu path Production> Basic data> Bill of mtl> General Data> Change message type. However it looks like there is a fixed set of a few non messages whose attributes can be changed. How can I add the BOM is recursvive message to this list and make it a warning message.
ThanksGS,
To my knowledge there is no possiblity to change this.
It is basically a check provided by SAP to prevent manual entry errors. If your scenario needs a BOM with Component material same as Header material then in the component Item level details in Basic data tab activate the check Box "Recurs allowed". Now system would not give any message and you can save the BOM
Regards,
Prasobh -
PackageMaker and "Could not create temporary BOM" Error
I have spent the last couple of nights trying to figure out why PackageMaker 3.0.4 (179) wouldn't build a package and kept failing on "Could not create temporary BOM" error. In case someone else runs into this, point your package content to an actual directory (folder), not a symlink, that should resolve this issue.
PS. BOM stands for "Bill Of Materials", not "Byte Order Mark", which also threw me for a loop.Originally Posted by AndersG
I think we need engineering to look at this. Any chance of opening an
SR?
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms
Thanks we have logged a SR for this -
BOM error in Rush Order.
Hello,
I am facing a very strange error while creating a rush Order with BOM item.
System Error:
1. No item category available (Table T184 SO ERLA TAQ).
I except the error. I get next error as
2. Structure explosion for item 000010 is not possible.
After this BOM explodes with only first 2 Sub Items ( Item cat for main item is determind as TAQ and Sub Items as TAE) , where as the complete BOM has 7 Sub items.
I have made the required configs in item cat determination in T184 table for order type SO, as follows.
SO ERLA - TAQ for Main Item of the BOM
SO NORM TAQ TAE for the Sub Item of the BOM
The same item (BOM ) works very well in OR/BV kind of sales order types, by exploding the BOM to full level(i.e all the 7 sub items are determined).
Has any one come across such an issue. Please let me know what could be the solution.
Thanks in adv,
ShripadHi,
Thanks,
In vov7 for TAQ Item Cat. the structure scope is maintained as 'A'. And that's the reason for Standard order 'OR' , the BOM is exploding properly.
It is only with Rush Order , the BOM is not exploding correctly.
BR
Shripad -
Hi Gurus,
I create Order Boms thru CS61, the T-code runs successfully stating
"Bom successfully created for the order/Item"
when i go T-code CS62 or CS63, an error is shown
Express Document "Update Terminated" by Author and User Name
and also Bom does not exist
Thanks in Advance,Hi ALL,
My Problem was related to Data Inconsistency in following Tables,
MCHA and STPO which are used for Batch Classification and BOM.
so we have run a report ZCCLZUOB with class type 022.
The Data Inconsistency's were deleted and the the T-codes are running fine.
Thanks for all the reply sent by all which was used one way or the other for the solution.
Regards
Sunder. -
Dear Gurus,
I have one issue where in the sales order there are no of items along with some third party items and BOM materials. This is Billign plan document type.
Noe when i change the quantiy of Header Item the quantities of Chield items do not get changed subsequently.I have tried to simulate the same error in the Quality but there it is working fine. I mean if i change header item qty from 1 to 48 it's component's qty is also getting changed properly.
Can you please tell me where and what might be the problem. One more thing i would like to strees upon is there are 4 items which are having BOM and this problem is for all the items.
Your help is highly appreciated.
Thanks & Regards,
VishalDear Lakshmipathi,
Thanks for your reply. In CS03 under the tab Quantity coorect quantity is maintained. This is same as what is maintianed in the Quality.
This is happening for all the materials where BOM is maintaiend. Once i enter header material the proper qty is coming for all the sub items but after that if i change the qty of header material it's sub item components qty does not get channged accordingly.
I am not getting why this is happening. I have checked sales doc type, Item category, BOM maintainance with Qualtiy and found out that there is no differnence.
If you can throw any light on other factors that are affecting this it will be helpful.
Regards,
Vishal -
Hi,
While I am trying to create a production order for a material (Header), I am encountering the following error:
'A Valid bill of material could not be found for the material XXXXX'
I am getting this error for 4 materials (Item), out of which 3 materials (Phantom) got valid BOM (BOM status and validity date are ok)
and one material is not marked as Assembly and has got no BOM.
What could be the reason for this? Any pointers reg this will be very helpful.
Thanks in Advance,
V.S.SabithaHi Sabitha,
pls answer this ,
1)in the message are you getting the matwerial number whic is phantom and used in BOM as assembly ?
2)or its itme which does have its own BOM , but its not phantom ?
3) the material is marked as Phantom and does have BOM.
normaly , while creating PO system search for the BOM as per the BOM application mentioned in the order type dependent parameters OPl8, check for the order type you are using what application its using.
now in that application check whats the sequence of usages maintained, ex 3 , 1 , 2, 8, 9 and so on..
check it out , and come back for discussion.
i hope the valid from date and other basic things you have already checked for material as well as BOms for all items.
Regards
Ritesh -
Recursive BOM error in MD04 (May be more related to MM?)
Hi,
I am looking for help with this error. We added a Substitute upper level Assembly Material into an existing BOM within a Production Order and this error occurs to the part in MD04.
Checking the available SAP Notes on this subject leads me to the conclusion that the reason for it happening is that the Low Level code on the substitute assembly material is missing!
The SAP Notes also provide a couple of downloads that can fix this issue, but only for SAP versions up to R/3 4.6? They are not applicable for our version - ECC 6.0.
Does anyone know if it is possible to manually change/update a Low Level Code for a material?
Regards,
AllanNo answer required at this time. Will re-post if error occurs again.
-
BOM Error - WIP job not Releasing
Hi,
I've a issue with a BOM because of which all WIP job for the assembly are failing, I'm not sure what the issue is, Please find the explanation below.
WIP job fails when try to Release it and also when I try to simulate the wip job using standard Simulate WIP job form, and click component button, I get this message.
'if the component is assigned to non-existing operation 1, then the same component but of different basis type cannot be assigned to minimum operation, because the merging of the component quantity would fail'
The component for operation 1, I dont see it being used again in the BOM for operation 1 with different basis type, not even end dated operation.
Any help is appreciated.
ThanksHi Sandeep,
Thanks for responding. Yes, I do see a phantom supply type. I flipped "Inherit Phantom Op Seq" (BOM > Setup > Parameters) which was checked to unchecked but I encounter same error when I try to simulate wip job.
I'm attaching data for ope seq 1 here, I'm showing end dated too. There are several other operation sequences too though.
item...op.....component...start date...end date.....supply type
seq....Seq
200.....1.....ITEM111.....1-Jan-10.....25-Oct-10.....Assembly Pull
210.....1.....ITEM112.....1-Jan-10.....25-Oct-10.....Phantom
220.....1.....ITEM113.....1-Jan-10.....25-Oct-10.....Phantom
230.....1.....ITEM114.....1-Jan-10.....NULL..........Assembly Pull
240.....1.....ITEM115.....1-Jan-10.....NULL..........Phantom
Thanks
Manu -
hi,
We have an BOM item A validate from 25th, it is a replacement of BOM item B which is invalidate from 25, but the production order created on 21st already used this item A instead of item B.
Could you help me to check what happend?Hi,
Are you using discontinuation indicator from material master to invalidate compoenent A with B?
In that case if staock of A falls to xero, production order automatically uses compoennet B when availability check is run.
Check and Revert,
Santosh Sarda -
Material Error in PO and Costing BOM
Hello,
Am having error when am using a certain material in creating production order error is "In-House production is not intended for material 50 status inactive Prod. : DSS only" this same material also encountered error in changing Costing BOM error is "material status Z4 inactive prod.: DSS only does not allow BOM maintenance". what thus this error mean and how could this material be used with this transaction?
Please guide and help me solve this.
Thanks and Regards,
JJHello,
You will find the Material Status in Basic Data 1 View as well as in MRP1 View (apart from other places)..\
For this material, it Seems that the status restricts the Material is Mat. Cost Estimate Procedure as "B"
And Production Order Header also "B" (Error Message).
One thing I would recommend is please check why this status is put?
Whether some one is intentionally put this status for any business reason?
or Blocked this material altogether?
Regards,
Siva -
Error while importing BDC models to SharePoint from SAP
Hi Team,
I am facing error while importing the BDC models to SharePoint from SAP Duet environment. Please find the attached screen shot and text document for reference.
Below are the tasks performed before importing the BDC models.
1) SSL & STS certificated created in the SharePoint environment.
2) Certificates are uploaded to the SAP duet environment.
3) SSL certificate created in SAP duet environment is uploaded to Trust location in SharePoint central admin.
Error while importing the BDC models manually through Central Admin.
Application definition while import failed. The following error occurred: The BDC model file is not well-formed. Data at root level is invalid at. Line 1,position 1.
C:\Program Files\Duet Enterprise\1.0>duetconfig/importbdc C:\Users\adm-in.itsupp
ort\Desktop\Rahul\BDC\models.xml
Starting import of models from C:\Users\adm-in.itsupport\Desktop\Rahul\BDC ...
Attempting to import model: Account
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '48' and Position: '20'.
Failed to import model: Account
Attempting to import model: AccountDocumentStorageCategory
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '46' and Position: '20'.
Failed to import model: AccountDocumentStorageCategory
Attempting to import model: AccountDocumentTypeStatus
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '46' and Position: '20'.
Failed to import model: AccountDocumentTypeStatus
Attempting to import model: AccountDocuments
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '46' and Position: '20'.
Failed to import model: AccountDocuments
Attempting to import model: AccountTitle
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '47' and Position: '20'.
Failed to import model: AccountTitle
Attempting to import model: BOM
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '46' and Position: '20'.
Failed to import model: BOM
Attempting to import model: Contact
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '46' and Position: '20'.
Failed to import model: Contact
Attempting to import model: ContactTitle
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '47' and Position: '20'.
Failed to import model: ContactTitle
Attempting to import model: CountryCode
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '48' and Position: '20'.
Failed to import model: CountryCode
Attempting to import model: CustomerInquiry
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '47' and Position: '20'.
Failed to import model: CustomerInquiry
Attempting to import model: CustomerInquiryItem
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '44' and Position: '20'.
Failed to import model: CustomerInquiryItem
Attempting to import model: CustomerInquiryPartner
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '44' and Position: '20'.
Failed to import model: CustomerInquiryPartner
Attempting to import model: CustomerQuotation
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '49' and Position: '20'.
Failed to import model: CustomerQuotation
Attempting to import model: CustomerQuotationItem
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '47' and Position: '20'.
Failed to import model: CustomerQuotationItem
Attempting to import model: CustomerQuotationPartner
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '47' and Position: '20'.
Failed to import model: CustomerQuotationPartner
Attempting to import model: Employee
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '46' and Position: '20'.
Failed to import model: Employee
Attempting to import model: InquiryItemDocument
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '49' and Position: '20'.
Failed to import model: InquiryItemDocument
Attempting to import model: InquiryItemDocumentStorageCategory
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '45' and Position: '20'.
Failed to import model: InquiryItemDocumentStorageCategory
Attempting to import model: InquiryItemDocumentTypeStatus
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '45' and Position: '20'.
Failed to import model: InquiryItemDocumentTypeStatus
Attempting to import model: JobFunction
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '47' and Position: '20'.
Failed to import model: JobFunction
Attempting to import model: Product
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '46' and Position: '20'.
Failed to import model: Product
Attempting to import model: ProductDocument
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '42' and Position: '20'.
Failed to import model: ProductDocument
Attempting to import model: ProductDocumentStorageCategory
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '45' and Position: '20'.
Failed to import model: ProductDocumentStorageCategory
Attempting to import model: ProductDocumentTypeStatus
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '45' and Position: '20'.
Failed to import model: ProductDocumentTypeStatus
Attempting to import model: QuotationItemDocument
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '45' and Position: '20'.
Failed to import model: QuotationItemDocument
Attempting to import model: QuotationItemDocumentStorageCategory
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '46' and Position: '20'.
Failed to import model: QuotationItemDocumentStorageCategory
Attempting to import model: QuotationItemDocumentTypeStatus
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '46' and Position: '20'.
Failed to import model: QuotationItemDocumentTypeStatus
Attempting to import model: ReportTemplate
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '49' and Position: '20'.
Failed to import model: ReportTemplate
Attempting to import model: Role
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '65' and Position: '20'.
Failed to import model: Role
Attempting to import model: UserRoles
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '42' and Position: '20'.
Failed to import model: UserRoles
Attempting to import model: SAP.Office.DuetEnterprise.Workflow.UserSubscription
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '42' and Position: '20'.
Failed to import model: SAP.Office.DuetEnterprise.Workflow.UserSubscription
Attempting to import model: SAP.Office.DuetEnterprise.Workflow
[ERROR] The remote certificate is invalid according to the validation procedure.
Error was encountered at or just before Line: '45' and Position: '11'.
Failed to import model: SAP.Office.DuetEnterprise.Workflow
[WARNING] Duet Enterprise configuration utility has completed importing the BDC
models but some models could not be imported. Review the logs for detailed infor
mation on the errors which occurred during the import operation.
Failed to import the following models -
Account
AccountDocumentStorageCategory
AccountDocumentTypeStatus
AccountDocuments
AccountTitle
BOM
Contact
ContactTitle
CountryCode
CustomerInquiry
CustomerInquiryItem
CustomerInquiryPartner
CustomerQuotation
CustomerQuotationItem
CustomerQuotationPartner
Employee
InquiryItemDocument
InquiryItemDocumentStorageCategory
InquiryItemDocumentTypeStatus
JobFunction
Product
ProductDocument
ProductDocumentStorageCategory
ProductDocumentTypeStatus
QuotationItemDocument
QuotationItemDocumentStorageCategory
QuotationItemDocumentTypeStatus
ReportTemplate
Role
UserRoles
SAP.Office.DuetEnterprise.Workflow.UserSubscription
SAP.Office.DuetEnterprise.Workflow
C:\Program Files\Duet Enterprise\1.0>
C:\Program Files\Duet Enterprise\1.0>
Qucik response is much appreciated.
Regards,
Rahul Reddy.Take a look at this blog post,
http://brainof-dave.blogspot.com/2008/08/remote-certificate-is-invalid-according.html
Dimitri Ayrapetov (MCSE: SharePoint) -
Hi, could anyone help me with this problem.
When I try to install Keynote from App Store, I keep getting the "An error has occurred" dialogue and it didn't explain why.
Thank you!help anyone - I still can't use the trial - does anyone know what might cause the bom error in Keynote that stops the installation process.
-
Hi,
This is actually a bit Techno-functional type issue we have here.
There is a material having a recursive BOM. That means when it explodes it explodes into the same material.
So in Sales Order
item 10 - Material X
generates item 20 - material X.
After the GR is done as expected on Material X but in Item 20.
Till this part everything is fine.
Now we create the billing document. It should actually pick up Item 10 but instead it picks up item 20. Can you tell me any configuration / routines which can be done to avoid this issue.
We have the billing documnet which is referencing the Order and not the delivery.
Any suggestions would be very useful.
Thanks and Regards,
Arnab.
Edited by: Arnab Panigrahi on Jul 2, 2008 3:10 PMDear All,
I am having similar issue, Can any one help me in this regard.
As per my client requirement:
For Ex:
Scenario 1:
To produce 100 kg of A, 102 kg of A is used.
Due to Market return stock 2 KG will processing loss or indivisible to loss.
As per business policy i can't change these BOM Header & Item Quantities.
The system cannot cost material A and issues an error message.
Scenario 2:
To Produce 100 Kgs of A Material(FG), We need B Material 98 KG(SFG).
Product is ready and despatched to Market.
After Some time Few Stocks will come as Market retunrs in FG Stage(A).
We need to Re-Process the same and stock will converted to SFG(B).
During this case also i am getting Recursive BOM errors.
Due to in A Material BOM ,B is a component already-Costing run Completed sent to Market. Now I am Converting the stock of A to B through a Production order while maintaining A as Component for B Material BOM.
Every stage i have alternative BOMs.
As per the requirement i can't avoid, Please suggest is there other user exits or Message control or Process to resolve the same.
Regards
Manoj Kumar Pedada
SAP CO Consultant -
Hi
iam facing error while creating, changing and display BOM.
Error: Status MHCO of the user interface SAPLCSDI missing.
rgadsDear,
MHCO - BOM item screen GUI status..Are you using any Alternative item?
Have you applied any new patch in the system?
Contact ABAPer, can give more details
In SAP service place serach for this interface program,,,you will get many notes on this.
Maybe you are looking for
-
Hi Labviewers, I have a vi running, and two PCs are monitoring it, one is local and another one is remote. I can see the remote front panel at the remote machine by using application property node, but it seems only one of the two PCs has the control
-
N73 problem with the usb cable
so, i have a problem with the connectivity of my usb when i plug the cable to my pc or any pc it said "USB device Not Recognize" this happen since i use my headset often than before, is that take effect? or when i use card reader to transfer all file
-
JAX-RPC and non-primitive data types
Hello all! I am using JWSDP v1.3 and i have a problem using non-primitive data types as return types for my operations. Consider the helloservice example of the JWSDP1.3 tutorial. Now suppose that instead of having the simple operation sayHello() tha
-
How to enter into interface configuration mode on aironet 1130AG
How can I enter into "interface configuration" on Aironet 1130AG, AIR-LAP1042N? When I put following commands in enable conf t interface Dot11Radio1 but, it fails and I cannot enter into "interface configuration". How can I do this ? The reason why
-
Video Answer to "How to make 3D Video out of regular 2D Video"
Didn't know how to do that and asked here this question 2 month ago - Is it possible to make 3D video out of regular 2D video file to watch further on my iPod. So I came across an answer to this on ...Youtube! Here are two video screencasts I found t