BOM explosion in sales order in variant configuration?
Hi All,
After searching all threads iam posting this .
My requirement is
In sales order the material(ZDESKTOP) which has been created in KMAT with item caragery gruop 0002(Configuration) has compenents like PROCESSESOR,DRIVE,KEYBOARD,STORAGE,MEMORY,etc where again each components have 3 varieties(values).while creating sales order the components and picking of values is running well.THE GREEN LIGHT IS ON IN VARIANT CONDITIONS.pricing is picking for variant conditins(values)
These values are stockable items which i created as semifinished.
item catagery TAC is determined.
Now my problem is the values(sub-items) which are attracted pricing should reflect as sub items of ZDESKTOP.
I have created a BOM also for ZDESKTOP.
I HAVE GET ONLY THE PRICED VALUES AS SUB-ITEMS.
HOW TO DO THIS SCENARIO?
Need Help.
Regards,
Reddyy
Edited by: REDDYY SD on Feb 4, 2009 12:51 PM
Hi
check your Item category group in material master , sales org view, if it is 0002 Configuration this material use for varient configuration, but your case it may be LUMF (Structure/mat. below) it used for sub item price.
It is , one of the reason.
Regards
Paulraj.S
Similar Messages
-
Hi Experts,
I have met a problem in BOM explosion in sales order.
I have maintained the BOM with usage 5 and the conversion between header material and component of the BOM. But in the sales order entry, no matter how many qty I entered for the header material, after the BOM explosion, the qty of component is 1.
Can anyone help?
Regards,
EmilyHi,
Go to CS02 and select ur bom and go to components give 1 that means 1;1
hope u get it
regards,
sadanandam kasarla -
BAPI/FM in ECC to create a sales order with variant configurable material
Hi all,
I need to create a function module that creates a sales order in ECC with a variant configurable material.
can some one tell me if there is a in built function module or BAPI that i can make use of to create a sales order with variant configurable material in ECC.
Regards,
Jessica SamThanks MxG,
I dont know how to use this BAPI. .Can you suggest me a sample code.
My reqmnt is, i have
Sold to party, ship to party, bill to party , VC config material and all char values that should be populated while creating a sales order.
please help me with what values should i populate in i/p paramters and and how to use this BAPI with some sample code if posible.
Regards,
Jessica. -
Sales Order with Variant Configuration
I´m trying to create a Sales Order with Variant Configuration.
First, I tried to create the order with the BAPI SD_SALESDOCUMENT_CREATE but It would not let me update characteristics.
Then I separated into two BAPI's:
SD_SALESDOCUMENT_CREATE to create Sales Order and BAPI_SALESORDER_CHANGE to modify the characteristics.
I run the two SAP BAPI's from SAP and create the Sales Order and make the characteristics correctly, but when I try to invoke from The Middleware the message V1 555 The sales document is not yeat complete is displayed and does not update the characteristics.
Both functions are such as Remote-enabled Module.
The remote user profile is SAP ALL
Reviewing where the message is used, I see that the message is in the include MV45AF0B_BELEG_BEARBEITEN_ENDE
IF DA_LINES> 0 AND
SY-NE SPACE AND BINPT
CTU_AMODUS BI_INFO-NA 'A' AND
CATTAKTIV IS INITIAL.
MESSAGE I555.
ENDIF.
Do you have any idea why since Middleware is not working?.
Best Regards.
Blanca Segovia.Hi Diwakar
I changed the creation of Sales Order using only SD_SALESDOCUMENT_CREATE and using Commit Work and it is the same, running the function from se37 create the Sales Order and make the characteristics correctly, but when I try to invoke from The Middleware the message V1 555 The sales document is not yeat complete is displayed and does not update the characteristics.
I Open that Sales order in VA02 and check 'Incompletion Log' the screen show 1 Configuration, I Open the tab of the characteristics without changing the characteristics and only save, then the status changes to Complete document.
You give me another idea that could be happening?
Thank you very much.
Blanca Segovia. -
BOM explosion in Sales order with material variants
Dear all,
we would like to work with Variant Matching in the Sales Order. Additionaly we would like to explode the BOM....according to the SAP help this is not possible....
http://help.sap.com/erp2005_ehp_06/helpdata/en/bd/05a7d69d3211d190380000e8a49aad/frameset.htm
Does anybody of you has any ideas how and where to make this happen?
Thanks for your help and kind regards
JanHi,
I have gonethrough the SAP link referred by you but never come across with any problem in type matching during Sales order even if the BOM explosion is set for Multilevel in Configuration Profile provided the other pre requisite set up was perfect.
Regards
Brahmaji D -
Regd : Error during saving the sales order for Variant configuration
Hi -
When the item( config material) is saved in the sales order , system scheduled the production order and getting an error as " Posting Rule for Assembly order for item 000010 could not be generated".
Any solutions regarding the error.Hi,
This is the process of Assembly to order with variant configuration. In material master, you can maintain gen item category 0002 (configurable material) in basic data view, sales 2 view item category grp 0002 and strategy group 82 in MRP 3 view. After creating of material master, BOM & Routing, You can create sales order in VA01 transaction.
In this VA01, When you create sales order, system will check material availability, capacity checking and system will show variants for each items. And also when you will save the sales order, system will create production order no immdiately.
So you can maintain the above settings compulsory.
please let me know any clarification.
Regards,
Mohan -
BAPI for Creating Sales Order For Variant Configuration Materials
Dear Gurus,
Before posting this thread, we have referred many SDN threads, OSS notes and other sites for any sort of help..but no success..All threads and other referrals are not much of help as they are kind of incomplete( Perhaps, we are unable to understand them..no offense).
Few checked threads on this subjects are:
http://scn.sap.com/thread/34590
http://scn.sap.com/thread/851070
http://scn.sap.com/community/abap/blog/2014/04/23/update-vc-variant-configuration-data-using-standard-bapi-in-sales-order
http://scn.sap.com/community/abap/blog/2014/07/15/creating-orders-with-variant-configured-items-using-bapisalesordercreatefromdat2
http://scn.sap.com/community/abap/blog/2014/04/23/update-vc-variant-configuration-data-using-standard-bapi-in-sales-order
http://scn.sap.com/thread/120144
OSS: 549563
Well, we're using the BAPI (BAPI_SALESORDER_CREATEFROMDAT2) which creates the sales order successfully but without the characteristic values in line items.
We're passing data to the following parameters - ORDER_CFGS_REF, ORDER_CFGS_INST, ORDER_CFGS_VALUE to create the variant config but not able to see it getting created.
Pls find attached BAPI coding document for your reference.
If you could throw any light on this issue will be of great help for us.
Thank You in Advance!!!
Reg,
Jagan-SD.Jagan nath
Try below.
you would need miimum of 3 segments to pass variant config data using this bapi
ORDER_CFGS_REF for each configurable item
POSEX = ITEM #
CONFIG_id , root_id - Start with 1 and increment it for each configurable line item
ORDER_CFGS_INST
CONFIG_ID - from above
INST_ID - Start with 1 and increment it for each configurable line item
OBJ_TYPE = "MARA'
CLASS_TYPE = '300'
OBJ_KEY = material #
ORDER_CFGS_VALUE
CONFIG_ID for the item, INST_ID for the item
charc for characteristic value
VALUE for characteristic value
Reference thread
How to Fill Configuration Data in BAPI BAPI_SALESORDER_CREATEFROMDAT2
Hope it will solve your issue.
Thanks
Ritesh -
BOM explosion in sales order for configurable materials and variants
Hi,
I have these materials:
A: configurable material (header)
B: variant material (header)
C: configurable material 1 (position)
D: configurable material 2 (position)
E:variant material 1 (position)
F:variant material 2 (position)
I can in the sales order explode in this way the BOM (using SD01 application in the position type of the header material):
1) A --> C+D
2) B --> E+F
while I can't make the explosion in this way: A --> EF and A --> CE
is this possibile? I want to make an explosion of a BOM for a configurable material and having variants material as sons, or having mix sons (one configurable and one variant)
Thank you
SandraHi Sandara,
Just check the BOM in cs03 u have maintained !!! If u have maintain the variant material there in the config mat BOM with object dependencies than u can explode !!!!
Please let me knwo if u any query and also if u elabore more than will help u out -
Creation of sales order with Variant configuration info
Hi friends,
I am creating sales order along with Variant configuration data. We have 3 level BOM structure.
I am using BAPI_SALESORDER_CREATEFROMDAT2 and filling in ORDER_CFGS_REF, ORDER_CFGS_INST, ORDER_CFGS_PART_OF ORDER_CFGS_VALUE, ORDER_CFGS_REFINST
tables exactly the same way BAPISDORDER_GETDETAILEDLIST FM returns.
Sales order is being created with no variant configuration information.(Not in the header level atleast)
Can any one help me on this.
Thanks
SeshagiriUpdating Variant Configuration data for SO item became little tricky for us in an ongoing implementation. After spending some hours investigating the correct combination of data to pass, we were able to post the document correctly. As no detailed documentation is available online for this scenario, I hope this post will help community for similar requirements. J
For updating Variant configuration (VC) data for Sales order item, we need to populate below tables of standard FM or BAPI (e.g. SD_SALESDOCUMENT_CREATE).
Normally the standard FM or BAPI does not return any error messages in case configuration data is not updated successfully.
· SALES_SCHEDULES_IN: The required date field should be populated with appropriate value (REQ_DATE).
· SALES_ITEMS_IN: Field PO_ITM_NO should be populated with appropriate value.
· SALES_CFGS_REF Table:
1. This table should have 1 record per item.
2. Combination of CONFIG_ID and ROOT_ID should be unique across line items.
POSEX
000010
CONFIG_ID
000001
ROOT_ID
00000001
SCE
1
COMPLETE
T
CONSISTENT
T
CBASE_ID_TYPE
G
· SALES_CFGS_INST:
1. This table should have 1 record per item.
2. Combination of CONFIG_ID and INST_ID should be unique across line items.
CONFIG_ID
000001
INST_ID
00000001
OBJ_TYPE
MARA
CLASS_TYPE
300
OBJ_KEY
MATNR value
QUANTITY
Quantity value
QUANTITY_UNIT
Quantity Unit
COMPLETE
T
CONSISTENT
T
OBJECT_GUID
MATNR value
PERSIST_ID_TYPE
G
· SALES_CFGS_VALUE:
1. Combination of CONFIG_ID and INST_ID should be unique across line items.
2. We can have multiple characteristics for a material. In that case appropriate records should be inserted in this table. Note that CONFIG_ID and INST_ID should be same for all the rows you insert in this table for multiple characteristics for a material.
3. The characteristic value should be in SAP internal format.
CONFIG_ID
000001
INST_ID
00000001
CHARC
Material characteristics
VALUE
Material characteristics value
· SALES_CFGS_VK:
1. Combination of CONFIG_ID and INST_ID should be unique across line items.
2. We can have multiple characteristics for a material. In that case appropriate records should be inserted in this table. Note that CONFIG_ID and INST_ID should be same for all the rows you insert in this table for multiple characteristics for a material.
CONFIG_ID
000001
INST_ID
00000001
VKEY
Material characteristics -
Sales set in Retail and BOM explosion in sales order
Greetings.
I configured a sales set that contains variants of generic articles and also unique articles as follows:
Sales set: distinct code, LUMF - item category group, gets TAQ item categ in SO; it contains:
- Var 1 of article X, distinct code, NORM, gets TAE in SO and mat. nr. and HL item is greyed out in SO
- Var 1 of article Y, distinct code, NORM, gets TAE in SO and mat. nr. and HL item is greyed out in SO
- unique article Z, distinct code, NORM, gets TAE in SO and mat. nr. and HL item are NOT greyed out in SO
as a result changing Z with whatever different article is possible.
Also the individual quantities for the components are editable: I was expecting to be able to modify ONLY the set's quantity and see the components multiply accordingly but iti is not the case.
You can download a picture from [HERE|http://fbx.ro/5j87odrxexs3s7it]
My question is: what settings are needed to have inactive/grayed out quantity, material number and HL item for the components of the sales set and why do I get a different behavior between a unique material compared with a variant ?
Thank you in advance.
Best regards.
Edited by: Enache Catalin on Jan 21, 2009 4:25 PM - add pictureThank you for your patience.
The link would have revealed that there is no visible difference between SO's made with ERLA and LUMF header material , in both the user can modify quantities, item category, plant for ALL subitems and measurment unit plus Higher Level Item ONLY for unique items(why? that was my secondary question).
Nevertheless I tried to follow your steps and forth is what I found:
- working in Retail I didn't use CS01 for creating the BOM; instead I defined the structure(mat. codes and quantities) directly in header material (sales set - 10 material category - in my case). I could however open with CS02 the right BOM for my sales set but only if I don't mention the plant.
- further I used CS01 and added the delivering plant this time-> no result, the subitems can still be modified as described above...
I must add that I tried to use for sales set both KMAT and TRGO articles...and it happens the same.
Best regards.
Catalin. -
Bom explosion in sales order mrp(MD50)
Hi Experts,
In sales order MRP i.e. MD50 Getting the planned orders for header material(Finished goods) generated but for raw materials (BOM items) Purchase requisitions are not getting generated.
Details:
Header material A and raw materials B and C.
In material B in MRP 4 coll/ind indicator is 2 And same indicator for C is blank.
Now when we are running the MRP sales order based it will generate the purchase requisition for C only but not for B.
In OPPQ we have done the setting for sales order BOM explosion.
Can anyone please throw some light what is the setting missing in customization or in front end?
Thanks in advance.
Regards
VilasDear,
If you select individual requirement then system will not consider available stock and generate Proposals for every single requirments. Check in MRP4 view Individual / Collective .
Also you will find PR and Plan order with account assignment of Sales order (in case of MD50).
- If you select collective requirement then system will not generate planing proposals through MD50.In that case you have to go for individual MRP (MD02 / MD03)
Please try and come back.
Regards,
R.Brahmankar -
No BOM explosion in Sales order item if another item exist
Hi Experts,
I have the following problem:
If I have one item in sales order, it explodes multilevel and everything is OK.
If I have 2 items in sales order,
the first one(item 10) has to explode and
the second item (item=20)has as higher-level item the first sales order item (UEPOS=10),
there is no explosion.Item 20 is not in the BOM of item 10.
I don't understand why item 10 doesn't explode if there is another item in sales order with higher level to him. Any help please?
Thank you.
Kind regards,
DanijelaHI,
Chck the Item Category Grp. of line item 2 & line item 1 BOM materials.
I feel the item category of BOM Material is not NORM...
Also with that pls. check the item category of 2nd item.
try this i hope this will help you..
revert me if not solved...
Regards
Deepak
Edited by: Deepak Dhingra on Jun 18, 2009 10:43 AM
Edited by: Deepak Dhingra on Jun 18, 2009 10:52 AM -
User Exit - VA01 / VA02 Sales Order, using Variant Configuration Fields
Hi,
I'm doing a user exit for creating / changing a sales order (VA01/VA02), and in my program I'm trying to use the characteristic values in variant configuration: Extras -> Configuration.
I know there's a whole bunch of data in SAPMV45A, but I can't seem to find what I need. Structure RV45A is the closest I can find, but the characteristic name / value fields appear empty during the execution of the user exit.
Any help would be greatly appreciated.
Thanks!R u creating your own user exit or using the ones which are available for VA01/VA02?
If you can use existing ones, to get the more details abt them, please have a look at below link.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers -
Get Classification status of item in Sales Order for variant configuration
Hi Experts,
I want to get the classification status against the variant configuration of item in sales order.
When i enter the sales order in VA03 , at the item level, I select the item and click on item configuration icon below.
Here I can see the variant configuration. Now if I do not maintain the configuraiton correctly, then the classification status shows either locked or incomplete. When it is properly maintained it shows released. ( When it is locked, the classificaiotn status shows a red signal at the left bottom corner).
My requirement is to capture this classification status at the item level of each Sales Order.
How can I get this.Hi!
try this code:
* Initialization
CALL FUNCTION 'CUDB_INIT'.
CALL FUNCTION 'CE_C_INIT'.
* read configuration from database
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
EXPORTING
instance = vbap-cuobj
IMPORTING
configuration = gt_configuration
EXCEPTIONS
invalid_instance = 1
instance_is_a_classification = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE: /' No configuration data found!'.
EXIT.
ENDIF.
* only sinlgle-level configuration possible
READ TABLE gt_configuration ASSIGNING <gs_instance> INDEX 1.
* get and show status
SELECT SINGLE * FROM tclc WHERE
klart EQ <gs_instance>-conf-klart
AND statu EQ <gs_instance>-conf-cstatus.
FORMAT COLOR COL_NORMAL.
IF tclc-frei = 'X'.
WRITE: /'Status:', icon_green_light AS ICON.
ENDIF.
IF tclc-gesperrt = 'X'.
WRITE: /'Status:', icon_red_light AS ICON.
ENDIF.
IF tclc-unvollstm = 'X' OR tclc-unvollsts = 'X'.
WRITE: /'Status:', icon_yellow_light AS ICON.
ENDIF.
FORMAT COLOR OFF. -
Order BOM explosion in sales order
Hi,
Is it possible to explode order BOMS in sales order. If so how.
Intially we are creating sales order. Then we are creating order BOMS. When i open the sales order after creation of order BOMs, order BOM should be exloded enable us to dispatch in staggared lots.
regards,
N. LaxmanHi,
1) For the BOM to be exploded in the sales document the following customizing setting is required.
A) If the item category group is ERLA the item category of the BOM is TAQ, in the definition of which we have to specify the value A (Explode single level BOM) in the structure scope.
B) If the item category group is LUMF the item category of the BOM item is TAP in the definition of which we have to specify the value A in the field structure scope.
Regards,
Sheik
Maybe you are looking for
-
Custom metadata fields used in file name?
Hi, Is it possible to add to the list of meta data fields that are used as tokens for file names? I've been using Rob Cole's excellent custom meta data in the library module and now I want to use these fields to name the file during export... While a
-
URGENT - INTERNAL SERVER ERROR when connecting to site
i'm getting INTERNAL SERVER ERROR when connecting to site. everything was ok till yesterday night but since today morning, nobody has been able to log in the site. i looked at the Apache Listener log files in IAS_HOME/Apache/Apache/logs the error_log
-
Different among Photoshop CS6, CC, CC 2014
Hello experts, I am having so much confusion of: Adobe Photoshop CS6, then Adobe CC, then Adobe CC 2014. Is Adobe CC 2014 latest version of Adobe Photoshop? Is there a comparison chart for the differences among these three? Thanks for your help.
-
BW Project document - full cycle
Hi everyone, I'm in need of MM or SD project sample, bluprint, any document will help or PPT will be good Or write down all the involved step from A to Z thanks Dave
-
BAPI_SALESORDER_SIMULATE problem with output value
Hi guys, in ORDER_ITEMS_IN-REQ_QTY which is of type WMENGC, i passed value of 20.000 from lips-lfimg... the output from bapi ORDER_ITEMS_OUT-REQ_QTY (TYPE KWMENG) IS 0.020... why is this? what causes this? why the 20.000 becomes 0.020? Thanks a lot!