BOM Explosion Levels: SAP Help needs some help (and so do I!)

I'm using CS12 to explode a BOM. I added some fields to my layout - specifically "PPH" which the (f1) help calls "Path (Predecessor)"
The SAP Help has a BOM tree example but the formats are all wrong. I can't tell which of their real/dummy materials go into which level of build...not to mention, shouldn't "Mat J" be a 3/1 - 3rd level of the BOM??
I am creating a custom components report and trying to understand how these Path-Pred / Level values so I can correlate my BOM levels visually to the report results.

Hi,
Agree the help display of the BOM structure is not so user friendly.
For level, the number increases when you move in vertical direction in the BOM across levels (T to B).
For path, the number increases when you move in horizontal direction in the BOM at a given level (L to R).
So now look thru' the values in CS12 & you should be able to figure it out.
Regards,
Vivek

Similar Messages

Blackmagic audio levels low. Need some help!!!

I just got the blackmagic sp. Everything is working great except for the audio input to the computer. I have set the reference level for tone to 0 on my beta sp deck. I'm clipping with the gain all the way down on my monitor sound board. The main problem is that i cannot get my audio level above -15 in FCP. Any Suggestions?
Dual 2.5 GHz PowerPC G5 Mac OS X (10.4.4) 4 GB DDR SDRAM

Try this:
Beta deck 0dB on the meter
Set the mixer at unity (what sort of mixer is it?) Put the master output fader at whatever the mixer thinks is zero on the slider. Raise the L&R input sliders until you get 0dB on the mixer's meters. Open log and capture and play bars and tone from the deck. Look at the meters in fcp. Adjust the mixer master fader until the level raises to -12 dB.
Does this not work?
If it doesn't you might want to check how you are coming out of the mixer-- are you sure you're using the proper outputs?

PLEASE HELP: Need some help with coding a next page button.

so ok, in details, I'm trying to code a next page button and can't really figure out how and tried to look for them over the net but can't find the kind I am looking for. So ok, the kind of next page button I'm looking for is the kind where you have like << 1 2 3 4 5 ... (Next page button) >> not just a button where I need to hyperlink it to the next page url cuz I have like 35 pages to put... so I'm trying to figure it out yet no cigar so can someone please help me with this? Thanks!

What I've seen done a lot (on forums with upwards of 1000 pages on some threads) is to add a "pagination" block of code that has:
two or three pages before the current page
two or three pages after the current page
a drop down with ALL pages listed
The "next" link or button is then just a copy of the final link in the inline list.
Something like this:
<table>
<tr>
<td align="right" valign="bottom" nowrap="nowrap"><span class="gensmall"><b>Goto page <select name="generate_pagination" onchange="if(this.options[this.selectedIndex].value != -1){ window.location = this.options[this.selectedIndex].value; }"><option value="forum-page-26.html" selected="selected">1</option><option value="forum-page-26-45.html">2</option><option value="forum-page-26-90.html">3</option><option value="forum-page-26-135.html">4</option><option value="forum-page-26-180.html">5</option><option value="forum-page-26-225.html">6</option><option value="forum-page-26-270.html">7</option><option value="forum-page-26-315.html">8</option><option value="forum-page-26-360.html">9</option><option value="forum-page-26-405.html">10</option><option value="forum-page-26-450.html">11</option><option value="forum-page-26-495.html">12</option><option value="forum-page-26-540.html">13</option><option value="forum-page-26-585.html">14</option><option value="forum-page-26-630.html">15</option><option value="forum-page-26-675.html">16</option><option value="forum-page-26-720.html">17</option><option value="forum-page-26-765.html">18</option><option value="forum-page-26-810.html">19</option><option value="forum-page-26-855.html">20</option><option value="forum-page-26-900.html">21</option><option value="forum-page-26-945.html">22</option><option value="forum-page-26-990.html">23</option><option value="forum-page-26-1035.html">24</option><option value="forum-page-26-1080.html">25</option><option value="forum-page-26-1125.html">26</option><option value="forum-page-26-1170.html">27</option><option value="forum-page-26-1215.html">28</option><option value="forum-page-26-1260.html">29</option><option value="forum-page-26-1305.html">30</option><option value="forum-page-26-1350.html">31</option><option value="forum-page-26-1395.html">32</option><option value="forum-page-26-1440.html">33</option><option value="forum-page-26-1485.html">34</option><option value="forum-page-26-1530.html">35</option><option value="forum-page-26-1575.html">36</option><option value="forum-page-26-1620.html">37</option><option value="forum-page-26-1665.html">38</option><option value="forum-page-26-1710.html">39</option><option value="forum-page-26-1755.html">40</option><option value="forum-page-26-1800.html">41</option><option value="forum-page-26-1845.html">42</option><option value="forum-page-26-1890.html">43</option><option value="forum-page-26-1935.html">44</option><option value="forum-page-26-1980.html">45</option><option value="forum-page-26-2025.html">46</option><option value="forum-page-26-2070.html">47</option><option value="forum-page-26-2115.html">48</option><option value="forum-page-26-2160.html">49</option><option value="forum-page-26-2205.html">50</option></select> <b>1</b>, <a href="forum-page-26-45.html">2</a>, <a href="forum-page-26-90.html">3</a> ... <a href="forum-page-26-2250.html">51</a>, <a href="forum-page-26-2295.html">52</a>, <a href="forum-page-26-2340.html">53</a> <a href="forum-page-26-45.html">Next</a></b></span></td>
</tr>
</table>

Need some help in ARCHITECTURE level for upgrading SAP BW 3.5 to SAP BI 7.0

HI all,
I am a consultant in a small company, i am curently handling upgradation project i need some help in ARCHITECTURING this complete project, please share me your knowledge, like process flows what information i need to get from clients before starting the project, what is pre upgradation checks, post upgradation cheks ...............
Thanks in advance.............

Hi,
You need to confirm the downtime during the upgrade activity.
Check for Space and resource allocation.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8d1a0a3a-0b01-0010-eb82-99c4584c6db3
https://wiki.sdn.sap.com/wiki/display/BI/UpgradefromBW3.XtoBI7.0+%28SP13%29
https://wiki.sdn.sap.com/wiki/display/BI/Migrationof3.xobjectstoBI7.0
You need to make sure some OSS notes should be applied, check the below link for the same:
https://wiki.sdn.sap.com/wiki/display/BI/UpgradetoNetWeaverBI7.0%28SAPNotes+%29
http://wiki.sdn.sap.com/wiki/display/BI/BIUpgradation-HelpfulOSSnotesfromEDWperspective
Hope this helps...
Rgs,
Ravikanth.

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Need Some help in Developing an ALV report ..Plz help me

Hi Experts I am basic learner to ABAP Here I need some help in developing a Delivery *** Invoice Report....Please help me by spending a little time..
Tables are VBAK VBAP LIPS LIKP   and Document floe table is VBFA
SELECT VBELN VKORG VTWEG SPART
    FROM VBAK
    INTO TABLE I_VBAK
    WHERE VBELN IN S_VBELN.
IF I_VBAK IS NOT INITIAL .
    SELECT VBELN POSNR MATKL POSAR WERKS
      FROM VBAP
      INTO TABLE I_VBAP
      FOR ALL ENTRIES IN I_VBAK
      WHERE VBELN = I_VBAK-VBELN.
ENDIF.
IF I_VBAP IS NOT INITIAL.
    SELECT * FROM LIPS
      INTO CORRESPONDING FIELDS OF TABLE I_LIPS
      WHERE VGBEL = VBAP-VBELN
      AND VGPOS = VBAP-POSNR.
ENDIF.
IF I_LIPS IS NOT INITIAL.
    SELECT VBELN VSTEL VKORG KUNNR
    FROM LIKP
    INTO TABLE I_LIKP.
ENDIF.
Moderator message : Outsourcing is not allowed, don't expect others to correct your source code. Thread locked.
Edited by: Vinod Kumar on Aug 1, 2011 5:43 PM

hi ,
Look in this link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm</a>
Regards
Renjith Kumar

Need some help in developing routines

Hi Ajay/all,
I need some help in writing the routines to my business requirement. If you could send me your mail id I could mail you the requirement.I appreciate ur response.
Thanks.

hi ,
Look in this link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm</a>
Regards
Renjith Kumar

Need some help with guitar setup...

jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
digitech gnx-3
alesis sr-16
sure mic's
yamaha e203 keyboard
here's the setup:
yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
here's the problem:
everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
any help would be greatly appreciated!

anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

Need some help with MDX formula

Hello, I am not finding any good documentation on MDX formulas, there is a specific one that I need some help with....could someone please elaborate what exactly does this formula mean? thanks.
(MEASURES.[SIGNEDDATA],
CLOSINGPERIOD([%TIMEDIM%].
[%TIMEBASELEVEL%]))

If new MEASURE gets added to Measure's table , in BPC Client , etools->client Options-> Refresh Dimensions should get the new measure into the CurrentView .IF not try etools->client Options-> Clear Local application information .
Formula 2 :
(MEASURES.SIGNEDDATA,
CLOSINGPERIOD(%TIMEDIM%.
%TIMEBASELEVEL%))
This formula is used to retrieve AST & LEQ account values.
If current time member is at monthlevel ,ie ClosingPeriod of 2011.FEB is the current member it self ,and would retrieve 2011.FEB value.
If Current time member is at quarter level then ClosingPeriod of 2011.Q1 is 2011.Mar ,and would retrieve 2011.MAR value.
If Current time member is at year level then ClosingPeriod of 2011.TOTAL is 2011.DEC ,and would retrieve 2011.DEC value.
Formula 1 :
MEASURES.SIGNEDDATA
Irrespective of the level of the Time , MEASURES.SIGNEDDATA would retrieve current Time member value.This formula is used to retrieve INC & EXP account values
if current time member is at month level,2011.FEB , 2011.FEB value is retrieved.
if current time member is at quarter level,2011.Q1 , 2011.Q1(JANFEBMAR) value is retrieved.
if current time member is at year level,2011.TOTAL , 2011.TOTAL(JAN,FEB,....,DEC) value is retrieved.
Hope this helps.

Need some help with sound quality

Hi guys, new here. I'm working on creating an album on my own. Bass and vocals are real, everything else is using software instruments. I have about 8 songs done, but the problem is I don't really know what I'm doing as far as recording and levels go.
I'm using studio headphones and everything sounds fantastic through them, and even pretty good if I just hook up some earbuds, but when I bounce out a track and burn them to do a disc and play it in my car, it sounds awful. Suddenly the guitar is too low, drums are too loud.
I really need some help here. I'm even willing to pay someone to get me on the right track. Using paypal or whatever.

AecDuck wrote:
Where's the fun in that? Maybe you have different motives, but I got into home recording because I like doing things myself, even if I have to learn the hard way. If you know enough to get good bass and vocal recordings and mix that with virtual instruments, then you are well on your way to making a decent sounding mix. Mixing in headphones can be very deceiving. Things simply sound different in headphones. You need some monitors, even if they are crappy because if you can get it to sound good in crappy monitors it will likely sound good on other speakers.
The fun and experience comes from getting a good balance that sounds good in headphones, and in the monitors, and in your home stereo, and in your car stereo. Use the different audio systems as a reference. If the drums are too quiet in the car, bring them up a bit. If the bass is too loud in your headphones, put them down a bit.
If you bring in your recordings to be mixed by somebody else, first of all you're going to end up paying hundreds, if not $1000+ dollars, even in a sub-par studio. Secondly, it's never going to sound how you want it to sound. It's going to sound how THEY want it to sound.
I know it takes longer, and it's hard work, but you will have such a tremendous amount of satisfaction when your project is done knowing that YOU recording it, and YOU mixed it on YOUR equipment. It will be 100% yours.
Where's the fun? How about the fun in interacting with another human being? How about the satisfaction in having another validate what you've been trying to produce?
I don't think it's helpful to make generalizations about what type of experience the OP might have in getting professional help. I have had good experiences working with mixing engineers, and perhaps I have just been lucky, but I've been able to produce music that sounded how I wanted it to sound, but at a level beyond which my skill at the time would have been able to produce, AND I gained some insights to help me in the future.
It IS satisfying to teach yourself a new skill. And it takes a lot of patience, trial and error, and you might miss the mark more often than you hit it. If you're in a rush, it might be a viable solution to contact some studios and see if you can work with them. Learning from others is perfectly acceptable.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

TS1702 I need some help the apps were downloading slowly

The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
The iOS 6 update didn't work.
Please I need some help.
The apps didn't download.
Talking Angela and Ginger didn't download.
Talking Santa didn't update.

Try moving the existing backup file to a safe location so that iTunes has to create an entire new file. The backup file is located here. You can delete that backup once you get a successfull backup.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.

Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Tho

Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???

thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess.
That would convenient, but sadly it is not the case. Sorry!
Either way your welcome and best of luck!
B-rock

Need some help in debugging this exported script

Below is DDL generated by visio forward engineering tool . The example below consists of 2 test tables with one foreign key.
Forward engineering generated DDL script
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table1]') AND type in (N'U'))
DROP TABLE [dbo].[Table1]
GO
CREATE TABLE [dbo].[Table1] (
[test] CHAR(10) NOT NULL
, [test2] CHAR(10) NULL
GO
ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [Table1_PK] PRIMARY KEY CLUSTERED (
[test]
GO
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table2]') AND type in (N'U'))
DROP TABLE [dbo].[Table2]
GO
CREATE TABLE [dbo].[Table2] (
[test2] CHAR(10) NOT NULL
GO
ALTER TABLE [dbo].[Table2] ADD CONSTRAINT [Table2_PK] PRIMARY KEY CLUSTERED (
[test2]
GO
GO
ALTER TABLE [dbo].[Table1] WITH CHECK ADD CONSTRAINT [Table2_Table1_FK1] FOREIGN KEY (
[test2]
REFERENCES [dbo].[Table2] (
[test2]
GO
GO
When i converted this DDL script using scratch editor the migration tool gave some errors can anyone help me to resolve below
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table1]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table1;
END IF;
END;
CREATE TABLE Table1
test CHAR(10) NOT NULL,
test2 CHAR(10)
ALTER TABLE Table1
ADD
CONSTRAINT Table1_PK PRIMARY KEY( test );
--SQLDEV:Following Line Not Recognized
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table2]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table2;
END IF;
END;
CREATE TABLE Table2
test2 CHAR(10) NOT NULL
ALTER TABLE Table2
ADD
CONSTRAINT Table2_PK PRIMARY KEY( test2 );
--SQLDEV:Following Line Not Recognized
ALTER TABLE Table1
ADD
CONSTRAINT Table2_Table1_FK1 FOREIGN KEY( test2 ) REFERENCES Table2 (test2)
--SQLDEV:Following Line Not Recognized
;

Pl do not post duplicates - Need some help in debugging this script

Need some help in Los Angeles

working on a music video that needs some help. I own Final Cut and Color. Done the edit and it looks great but it needs help polishing and I have no idea what to do. Planning on showing the video this friday night in hollywood and I want it to blow people away. Is there anyone in the area would be willing to help? Please contact me ASAP. Thanks Ray

if you can give me a call that would be best, I can tell you what I need to accomplish. Thanks
818 935 5079

BOM Explosion Levels: SAP Help needs some help (and so do I!)

Similar Messages

Maybe you are looking for