BOM Explosion Number in Sales Order

Hi Experts,
     For a make-to-order case, I would like to assign a predefined BOM explosion number with fixed key date to a sales order item. Instead of manually assigning the BOM explosion number to the sales order item, is there any way to let the system automatically assign the BOM explosion number?
     As I read from SAP Library under the BOM Explosion Number (Fixed Key Date), it states "The system can automatically specify the BOM explosion number when entering planned independent requirements or customer independent requirements or when entering the sales order." So is there any configuration to be done in advance to enable the BOM explosion number to be automatically assigned to sales order item?
Thanks,
SW

I tried also setting up the material and its BOM determination by specifying only 1 BOM out of multiple BOMs. Still,
1. When I add the said material into sales order line and save the sales order, the BOM explosion number value never appear automatically in the sales order line.
2. When I run the planning on the sales order through MD50, the planned results do not have the BOM explosion number attached.
I think your advice is more applicable to selection of a BOM from multiple BOMs instead of determining the fixed key date based on appropriate BOM explosion number, correct me if I am wrong.
Regards

Similar Messages

  • BOM explosion while creating sales order

    hi
    i created a fert ,verp and halb in the palnt XX
    created a BOM for fert with level 5 for halb and VERP as stock item
    for fert in MM01 item category is ERLA and extended with sales org
    while raising sales order for fert am getting error as
    HALB and VERP is not copied for BOM
    pls help me

    resolved
    created a sales view for the HALB and ROH
    Edited by: geepee on Jan 27, 2010 10:51 AM

  • BOM explosion number field

    Hello Gurus,
    Is there any field for BOM explosion number in production order header data too?One field is in assignment tab in CO02 but I guess it is at item level.
    I dont find this field at header level but perhaps it is hidden. Do you see it?
    cheers
    Sunny

    Sunny,
    This is just an understanding problem i think. In SAP the header data is maintained in 2 tables infact in 3 tables.
    1. - AUFK - Basically the order master table.
    2. - AFKO - Basically the Header table, containing details of the order which is common if the order has multiple items.
    3. - AFPO - Basically this is where specific to the Order Item data is stored, for normal order you can find only one item per order. But you can really see the difference when you have co-products in your order, here in AFPO table you can see multiple items for the order.
    Hope this helps your understanding,
    Regards,
    Prasobh

  • BOM explosion number.

    Hello SAP Gurus,
    What is the use of BOM explosion number? after creation how & where to assigne it?
    with regards,
    dev123.

    Hi,
    If you want to ensure that for a certain production unit, the BOM structure is always exploded with the same date, you can assign a BOM explosion number to the planned order (or for make-to-order production it can be directly assigned to the sales order).
    If you do not use the assignment of a BOM explosion number, the planned start date of the planned order is always used as the explosion date for the BOM. The system explodes the particular BOM that is valid on this date.
    For multi-level BOM structures, larger time intervals may exist between the explosion dates of the individual assemblies. If BOMs (or alternative BOMs) have been changed in the meantime (for example, exchanging individual components due to new technical drawings, changed production techniques, due to parts to be discontinued etc.) a situation may exist whereby an assembly that is used repeatedly is produced with different BOM structures.
    Create BOM Explosion Number:-
    1.  Starting from the MRP menu, choose Master data --> BOM explosion number -->Edit (MDSP)
    The system displays the initial screen for maintaining the BOM explosion number.
    2.  Choose  .
    The screen for maintaining the BOM explosion numbers now appears.
    3.  Choose New entries.
    A screen now appears where you can enter new BOM explosion numbers.
    4.  Enter data as required.
    BOM explosion number
    The BOM explosion number is the object for which the following data is maintained. It can be entered alphanumerically.
    Fixed key date
    The fixed key date determines which bill of material is exploded.
    Plant
    You can also specify a BOM explosion number for a specific plant. Enter the appropriate plant in this case.
    Material
    You can specify a BOM explosion number for a specific material. Enter the appropriate material in this case.
    Status
    You can set the BOM explosion number to active or inactive using the status field. Only active BOM explosion numbers are used in the planning run.
    Save your entries.

  • How to change bom explosion number text

    Hi All,
    I have a requirement of changing of bom explosion number text in sales document.
    When we create sales order we will give bom explosion number(SNUM-SERNR)
    I want to change the text of BOM explosion number(snum-SNTXT) as per my requirement with some custom field value of the same transaction.How do I change this?
    Regards
    Mahesh

    Hi,
    I  made changes as addressed.
    ( CC02, In Object types tab. Check box Mgt Rec. i. e Indicator: Object management record generatering.)
    Now facing validity date during ECN creation, when I put put todays date. To create ECN, its giving me following error.
    ( Date 17.07.2009 is within a protected time period )
    Please suggest me solution.
    Thanks
    Edited by: Bhushan Mehar on Jul 17, 2009 10:48 AM

  • Transfer of changed order BOM from quotation to sales order

    Good morning!
    Please consider the following scenario involving variant configuration:
    A quotation is raised in the system, and the values of the characteristics are assigned. Therefore a order BOM is generated (for the quotation), and that order BOM is changed manually using tcode CU51 (for cost estimates purposes). When it is saved, the system updates the BOM in the quotation automatically (ok, this is a desired behavior).
    Although when we create an sales order with reference to that quotation, the newly chnaged order BOM is not copied to this new order, the order BOM is redetermined instead.
    How can I make the system to copy it from the quotation properly?
    Thanks in advance!
    Adriano Cardoso

    Thanks for the reply. I have verified this note and it seems more toward the BOM explosion in the sales documents themselves than for the modifications made afterwards (CU51 changes in BOM, for example).
    After realizing that, I´ve made a little research and found the Order Engineering Workbench possibility, which seems to fulfill all our requirements regarding this point. I looked all over SDN and haven't found too much input about it. In the SAP VC book, says it is not part of the SAP ERP, but a add-on.
    So, you don't happen to have any idea of how can we check if it is activated / installed  in our system or not? We are on version 5.0.
    Thanks!
    Adriano Cardoso

  • BOM Explosion based on Production Order Creation

    Hi PP Guru,
    My client wants the BOM Explosion date to be based on Production Order creation date. Could you help to advise how to set-up this requirement?
    I have showed them these possible System Configuration in BOM explosion, but none of these options are applicable to their current business practice.
    <OPPQ> BOM Explosion:
         BOM explosion number/order start date
    1     Order start date
    2     Order finish date
    3     BOM explosion number/order start date
    4     BOM explosion number/order finish date
    Looking forward to you reply.
    thanks,
    John

    Hi Sundaresan,
    Thanks for your reply.  So do you think there's any other way to fulfill the client's requirement?  I was thinking to do the "PP Master Data" instead, in order to choose the date of explosion.
    Actually the scenario is this:
    Initially the Material XXXXXX has a valid BOM on 03.01.2011 to 12.31.9999, but then, some changes has been made, maybe the user has changed the component or added new component using 04.01.2011 to 12.31.9999 as validity date.
    For example, the user created the Production Order (manually in CO01 or from Planned Order conversion) on 03.20.2011 and the Order Star date is 04.01.2011, so the system will copy the updated BOM which is valid on 04.01.2011 to 12.31.9999 (based on Order Start date).
    However, the client wants to explode the previous BOM instead (03.01.2011 to 12.31.9999).
    Please advise.
    Thanks,
    John

  • Find BOM number by BOM explosion number

    Dear all,
    How can i find the BOM number used in a planned order ? by BOM explosion number ? Which tables shall i use ?
    Cheers,
    Olivier

    Hi,
    you can use following Function Module for BOM Explosion.
    CSAP_MAT_BOM_READ
    CS_BOM_EXPL_MAT_V2
    CS_BOM_EXPLOSION
    CS_BOM_EXPLOSION_MAT" or "CS_BOM_EXPL_MAT_V2
    Tables related To BOM
    STPO          BOM Item Details
    STPU          BOM Sub Items (designators)
    STKO         BOM Header Details
    MAST         BOM Group to Material
    STZU          BOM History Records
    STAS         BOM Item Selection
    STPF          BOM Explosion Structure
    PLMZ         Allocation of bill of material items to operations
    Regards,
    Sankaran

  • BOM Explosion for Multiple Process Orders

    Hi,
    I hope someone can assist me with the following: Is there a report I can run or transaction I can do to have BOM explosion for multiple Process Orders? I would like to input process orders for a week and see the BOM details per PO.
    Thanks

    Dear Sukendar,
    1.For this requirement you have to go for a Z report and you can give the Functional Spec's to prepare
    this report to your ABAP consultant.Prepare the input format,logic of the program and the output format.
    In the logic part you can make use of this Functional Modules's CSAP_MAT_BOM_READ or 
    CSEP_MAT_BOM_READ  or CS_BOM_EXPLOSION   or CS_BOM_EXPL_MAT_V2 .
    2.Using CEWB helps you to identify all the material that's having the BOM,but here the report does not
    shows you the level by level by BOM for a FERT.
    Check and revert back.
    Regards
    Mangalraj.S

  • How to count number of sales orders generated in a month in SAP SD

    Hi SD Gurus,
    I have a very strange query from client. I have to count the number of sales order created in a month for a z report. For example 30 in Jan, 25 in Feb etc. Could anyone suggest me How to count number of sales orders generated in a month in SAP SD.
    Regards
    Vinod Kumar

    Hi,
    Goto the T.Code "SE16" or "SE16n" or "SE11".
    Enter the table name as VBAK
    Enter the created on date as the starting date of the period and to date as the end date.
    Enter.
    Click on "Number of Entries".It will tell you the number of entries created in a particular period.
    If you want a report,goto the T.Code "VA05n".
    Regards,
    Krishna.

  • Delivery schedule line number in sales order is not populated in production

    Hi all,
    i am doing make to order scenario with 20 strategy group. In sales order we r defining the different delivery schedule lines.when i run the MRP and getting the plan orders for all the FG material and semifinished material, the sale order number and sale order item number is getting updated in production order . Beside these two , delivery schedule line number is not populated in production order.
    please give your valuable suggestion .
    i would be highly thankful to u
    Will reward points.
    Regards
    Kumaraguru

    Hi Kumar,
    Some changes done in your PRD server.If yes then contact abap consultant regarding the same.
    Because these type of problem comes when you do transport or changes done in the system.
    Regards,
    Anil

  • Delivery schedule line number in sales order is not populated  in productio

    Hi all,
    i am doing make to order scenario with 20 strategy group. In sales order we r defining the different delivery schedule lines.when i run the MRP and getting the plan orders for all the FG material and semifinished material, the sale order number and sale order item number is getting updated in production order . Beside these two , delivery schedule line number is not populated in production order.
    please give your valuable suggestion .
    i would be highly thankful to u
    Regards
    Kumaraguru

    Hi Kumar,
    Some changes done in your PRD server.If yes then contact abap consultant regarding the same.
    Because these type of problem comes when you do transport or changes done in the system.
    Regards,
    Anil

  • Want to add number of sales orders in a COPA report or form

    Hi All
    I created a COPA report that has two columns: sales from sales orders & sales from billing documents. Now I want to add columns which shows number of sales orders that make up sales. Can any one explain me , how can we acheive this  With a user exit, .
    thanks in advance for looking into this

    Hi Steve,
    Walter is very right in saying so.
    In SD module itself you can get some reports like this.
    Even in COPA you will get these kind reports.  But if your company is a big company and have lots of sales orders,
    Then you will have serious problems with System performance issue. 
    When you define that sale order is a segment level character, then system will ear up the resources and take very long time in executing the reports.
    But for some reason this requirement is a must case, then it is very simple
    you define Sale order in either form or report,
    then give the variable parameters like Co.Code, Period etc. you will get all the sales orders details for the selected period
    But think about not going for it before you make up your mind
    Best Regards
    Surya

  • Serial number in sales order creation

    HI all,
         please help to me........
    My requirement a add the serial number BAPI sales order.
    problem is their no serial number in bapi structure.
                How to add serial number crate a salesorder bapi.
    serial number is RIPW0-SERNR.
    Thanks & Regards,
    SReddy.

    hi,
    refer to this link
    http://help.sap.com/saphelp_nw04/helpdata/EN/3e/0e1089c24611d1ad09080009b0fb56/content.htm
    refer to this code...
    Also if you set the * CONVERT_PARVW_AUART = 'X' parameter to 'X' you can use sold to party as SP and ship to party as SH.
    REPORT ZEX_BAPISALESORDCRT .
    --Data Declaration--
    Data: st_BAPISDHEAD like BAPISDHEAD, " Sales Order Header Data
    ta_BAPIITEMIN like BAPIITEMIN occurs 0 with header line, " Ln item
    ta_BAPIPARTNR like BAPIPARTNR occurs 0 with header line, " Partner
    d_BAPIRETURN1 like BAPIRETURN1, " Bapi return msg
    d_vbeln like bapivbeln-VBELN. " Sales Order Number
    Move the data to create sales order in the repective parameters------*
    move: 'TA' to st_BAPISDHEAD-DOC_TYPE, " Sales document type
    '15493' to st_BAPISDHEAD-PURCH_NO_C,
    '00010' to ta_BAPIITEMIN-ITM_NUMBER,
    'Y-351' to ta_BAPIITEMIN-MATERIAL,
    '1100' to ta_BAPIITEMIN-PLANT,
    '1' to ta_BAPIITEMIN-REQ_QTY,
    'AG' to ta_BAPIPARTNR-PARTN_ROLE, " Sold to Party
    '0000007777' to ta_BAPIPARTNR-PARTN_NUMB.
    Append the internal tables-------------------------------------------*
    append ta_BAPIPARTNR.
    clear ta_BAPIPARTNR.
    append ta_BAPIITEMIN.
    clear ta_BAPIITEMIN.
    Move ship to party---------------------------------------------------*
    move: 'RG' to ta_BAPIPARTNR-PARTN_ROLE, " Ship to party
    '0000007777' to ta_BAPIPARTNR-PARTN_NUMB.
    Append the internal tables-------------------------------------------*
    append ta_BAPIPARTNR.
    clear ta_BAPIPARTNR.
    Call the Bapi to create the sales order
    CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
    EXPORTING
    ORDER_HEADER_IN = st_BAPISDHEAD
    WITHOUT_COMMIT = ' '
    CONVERT_PARVW_AUART = ' '
    IMPORTING
    SALESDOCUMENT = d_vbeln
    SOLD_TO_PARTY =
    SHIP_TO_PARTY =
    BILLING_PARTY =
    RETURN = d_BAPIRETURN1
    TABLES
    ORDER_ITEMS_IN = ta_BAPIITEMIN
    ORDER_PARTNERS = ta_BAPIPARTNR
    ORDER_ITEMS_OUT =
    ORDER_CFGS_REF =
    ORDER_CFGS_INST =
    ORDER_CFGS_PART_OF =
    ORDER_CFGS_VALUE =
    ORDER_CCARD =
    ORDER_CFGS_BLOB =
    ORDER_SCHEDULE_EX =
    if d_vbeln <> space.
    write: 'Sales order No. ', d_vbeln.
    endif.

  • How to restrict the Number of sales orders in theTCode:VL10A whil creation

    I'm creating the Delivery by using the batch job with program: RVV50R10C Here I need to restrict the number of sales orders numbers while creating deliveries for sales orders
    Like system should pick the sales orders (sales documents) from 1 to 100 OR 100 to 200
    Please advise me how to do it and what changes I need to do it

    Hi,
    Aslo, you can see Note 198137 - VL10: Customer-specific enhancements / user exits. As is for SO, check subroutine LV50R_VIEWG03. If cf_subrc = 1 thin this SO isn't seen in list.
    ***INCLUDE LV50R_VIEWG03 .
    *&      Form  POSTAB_VEPVG_FILL_USER
    FORM POSTAB_VEPVG_FILL_USER
         USING    IX_LIST_PROFIL    TYPE      SHP_VL10_LIST_PROFIL
                  IX_PARAMETERS     TYPE      SHP_VL10_PARAMETERS
                  IX_SELECT_OPTIONS TYPE      SHP_VL10_SELECT_OPTIONS
                  IT_ENQUEUE        TYPE      SHP_VL10_PACKAGE_T
                  IX_SD_ORDER       TYPE      SHP_VL10_SD_ORDER
                  IS_VEPVG          TYPE      VEPVG
         CHANGING CS_POSTAB         TYPE      SHP_VL10_ITEM
                  CF_SUBRC          TYPE      SYSUBRC.
    CF_SUBRC = 0.
    *  cs_postab-zzfield = ......              "add new field to List
    *  if xxxxxxx = yyyyyyy.
    *    cf_subrc = 1.                         "Exclude this index from List
    *  endif.
    ENDFORM.                    " POSTAB_VEPVG_FILL_USER
    I hope this helps you
    Regards
    Eduardo

Maybe you are looking for

  • My macbook pro wont get past the grey screen at startup. Help!!

    After doing a run of the mill software update on my macbook pro (running snow leopard) it froze during the "moving items into place" stage. I forced a shut down and now it wont get past the grey screen with apple logo and spinning wheel. I have tried

  • HT201371 There is no longer a TouchID item on my 5s - why? How to get it back?

    I used the TouchID then started to use only a code. Now after a while there no possibility to create a TouchID What to do?

  • Very odd CF card /  missing files issue

    This one has me stumped. Here are the specifics I've been able to recollect: Nikon D100 camera Sandisk 8GB Ultra CF card 1 yr old iMac with "PocketReader" multi card reader Problem: 40 NEF files just vanished from the CF card after it was removed fro

  • The Strange Case OF Disappearing Elements!

    For some time I have been using EA to build an entire website using lots of Symbols and animated buttons and also using external js libraries Edge Commons and Edgehero.  I have a few elements with links to other external sites that are coded to load

  • Can ODBC configuration data be stored in a Crystal Report?

    Post Author: Gary W CA Forum: Crystal Reports We've been running some SQL statements in Access pulling data from a server/database.  I decided to see if I could do the same thing in a Crystal Report with the intention of scheduling the report to run