BOM explosion using CS_BOM_EXLP_MAT_V2.

Hi All,
i am using FM :- CS_BOM_EXLP_MAT_V2 for the BOM explosion, but the problem is when the material is exploid i get the component of that material according to the plant but the some component which i get have no more list component in the same plant,but that component have the list component in the other like with other component, so i am not able to list out how much deep i have to go in the hierarchy .
Thanks in advance.
Regards,
Ritesh Jha

Similar Messages

Multi-level BOM explosion using CS_BOM_EXPL_MAT_V2

Hi All,
I would like to know, if anyone has used the function module 'CS_BOM_EXPL_MAT_V2' to prepare a report to read multi-level BOM just like CS12. If anyone has, can you please let me know how we can read the individual materials in the BOM from this FM.
Hope my question is clear, await inputs.
Vivek

Hi vivek,
We use this code to restrict the BOM line item for particular movements. C if that can help u out.
CALL FUNCTION 'CS_BOM_EXPL_KND_V1'
    EXPORTING
      capid                       = ''
      datuv                       = sy-datum
      emeng                       = 1
     mehrs                       = 'X'
      mtnrv                       = i_mseg-matnr
      stlal                       = '1'
      stlan                       = '1'
      stpst                       = 0
      svwvo                       = 'X'
      werks                       = i_mseg-werks
      vbeln                       = aufk-kdauf
      vbpos                       = aufk-kdpos
        VERID                       = ' '
      vrsvo                       = 'X'
      IMPORTING
        TOPMAT                      =
        DSTST                       =
     TABLES
       stb                         = ZStb
        MATCAT                      =
    EXCEPTIONS
      alt_not_found               = 1
      call_invalid                = 2
      material_not_found          = 3
      missing_authorization       = 4
      no_bom_found                = 5
      no_plant_data               = 6
      no_suitable_bom_found       = 7
      conversion_error            = 8
      OTHERS                      = 9
IF sy-subrc <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT zstb BY mtart.
LOOP AT zstb.
    IF zstb-mtart = 'Material type ' OR zstb-mtart = 'Material type ' .
    ELSE.
      DELETE zstb .
    ENDIF.
ENDLOOP.
CLEAR: v_menge, v_matnr, v_bwart, vv_menge, vvv_menge, zstb.
LOOP AT zstb.
    SELECT menge matnr bwart
    INTO   (v_menge,v_matnr,v_bwart)
    FROM   aufm
    WHERE aufnr = i_mseg-aufnr
    AND    werks = i_mseg-werks
    AND    matnr = zstb-idnrk
    AND    ( bwart = '261' OR bwart = '262' ).
          and    meins = 'FT2'.
     LOOP AT zstb.
      SELECT SINGLE matnr INTO vv_matnr FROM mara WHERE matnr = v_matnr
                                   AND mtart = zstb-mtart.
      IF sy-subrc = 0.
        CASE v_bwart.
          WHEN '261' .
            vv_menge = vv_menge + v_menge.
          WHEN '262' .
            vvv_menge = vvv_menge + v_menge.
        ENDCASE.
      ENDIF.
         ENDLOOP.
    ENDSELECT.
    CLEAR vf_menge.
    vf_menge = vv_menge - vvv_menge.
    CLEAR vv_menge.
    CLEAR vvv_menge.
Regards,
Vishal

BOM Explosion using Function 'CS_BOM_EXPL_MAT_V2 '

Hi Gurus,
I am working on BOM and exploding the multilevel BOM using function CS_BOM_EXPL_MAT_V2.
I want to know what does 'field-RNDKZ' do in that.
Thanks!

Using Function module CS_BOM_EXPL_MAT_V2
As already has been said, the RNDKZ field is used for rounding. If you fill with '1', it will never round.
Example (the problem I had):
Material A consist of et al. 0.008 piece Material AA.
Material AA consist of 1.0 pice Material AAA,
                              of 7.0 piece Material AAB,
                              of 6.0 piece Material AAC,
                              of 12.0 piece Material AAD.
CASE 1: You fill RNDKZ field with '1':
You get the correct result which is:
You need for producing 1 piece of Material A
0.008 piece Material AA,
0.008 * 1 = 0.008 piece of Material AAA,
0.008 * 7.0 = 0,056 piece of Material AAB,
0.008 * 6.0 = 0,048 piece of Material AAC.
0.008 * 12.0 = 0,096 piece of Material AAD.
CASE 2: You let RNDKZ field blank.
In your user profile for BOM field "Round of" is set to blank (table field TCSPR-AMEKZ, TA S_ALR_87004496).
You get following result (which is wrong)
You need for producing 1 piece of Material A
1 piece Material AA,
1.0 *1.0 = 1.0 piece of Material AAA,
1.0 * 7.0 = 7.0 piece of Material AAB,
1.0 * 6.0 = 6.0 piece of Material AAC.
1.0 * 12.0 = 12.0 piece of Material AAD.
The number of decimals is seen depends as well from how many decimals is set for unit of measurement. In this case the number of decimals for "piece" was set to zero. (TA CUNI).
If you let the field RNDKZ field blank, the user profile field "Round of" (table field TCSPR-AMEKZ) is used.

BOM explosion using variant configuration

Hi
I have a material (LAPTOP) and it has two BOM(RAM and HARD DISK).
LAPTOP is my main material.
Through VA01, when I try creating a Sales Order, I give the Material as LAPTOP and when I click "Configuration" menu, I will be showing the Variant Configuration Characteristic values for this material (LAPTOP) namely RAM and HARD DISK.
When I select them and come back to VA01 scree, I could see both the sub materials (RAM and HARD DISK).
But my question, I want to see only the one which I select. If I select RAM, then only RAM shoudl be displayed in my sales order not HARD DISK.
I have created the Characteristics as "Multiple Value" assignmetn
Please help.
Thanks in Advance,
Priya

Hi Priya,
Use Dependency concept ,to achieve your requirement.
Regards,
Subash.

How about this implementation of BOM Explosion(simulate stack)

REPORT YZWX00301_06 LINE-SIZE 142
                     LINE-COUNT 65
                     MESSAGE-ID YM1
                     NO STANDARD PAGE HEADING .
INCLUDE
INCLUDE: YXXI00050.
*TABLES use table define
TABLES: MARA,        " Material General Table
        MARC,        " Plant Data for Material
        MDMA,        " MRP Area table
        EORD,        " Vendor table
        A018,        " Vendor material mapping table
        KONP,        " Vendor condition table
        MAST,        " Material BOM table
        STPO,        " Material BOM Component table
        STAS.        " Material BOM Component table detail
*CONSTANTS define
CONSTANTS:
C_DAT_X        TYPE C VALUE 'X',
C_MODE         LIKE dxfields-fileoper VALUE 'R',
C_MASK         LIKE dxfields-filemask VALUE '.',
C_FLG_LOCATION TYPE C VALUE 'A',
C_DFPATH(15)   TYPE C VALUE '\bmwx\'.
Work Area Define
---- build stack structure -
DATA: BEGIN OF WK_STACK,
        LEVEL(1)      TYPE C,            "Save Level
        QUANT         TYPE I,            "Save Quantity
      END OF WK_STACK.
---- BOM work area -
DATA: BEGIN OF WK_BOM,
         LEVEL(1)     TYPE C,            "BOM LEVEL
         MATNR        LIKE MARC-MATNR,   "MATERIAL      18
         POSTP        LIKE STPO-POSTP,   "ITEM CATEGORY 1
         MENGE        LIKE STPO-MENGE,   "BOM COMPONENT 13
         DATUV        LIKE STPO-DATUV,   "VALID FROM    10
         DATUB        LIKE STPO-DATUV,   "VALID TO      10
END OF WK_BOM.
---- DATA work area -
DATA: BEGIN OF DATAITEM,
         LEVEL(1)     TYPE C,            "BOM LEVEL
         MATNR        LIKE MARC-MATNR,   "MATERIAL
         POSTP        LIKE STPO-POSTP,   "ITEM CATEGORY
         MENGE        LIKE STPO-MENGE,   "BOM COMPONENT
         DATUV        LIKE STPO-DATUV,   "VALID FROM!!!
         DATUB        LIKE STPO-DATUV,   "VALID TO
         EKGRP        LIKE MARC-EKGRP,   "PURCHASE ORG
         LIFNR        LIKE EORD-LIFNR,    "Vendor code     10
         MARK(1)      TYPE C,             "Mark
         KBETR        LIKE KONP-KBETR,    "Rate price      11
         KONWA        LIKE KONP-KONWA,    "Currency        5
         KPEIN        LIKE KONP-KPEIN,    "Unit Qty        5
         KMEIN        LIKE KONP-KMEIN,    "Condition Unit 3
         DATAB        LIKE A018-DATAB,    "Condition from 10
         DATBI        LIKE A018-DATBI,    "Condition to    10
       END OF DATAITEM.
---- File Line work area -
DATA: BEGIN OF LINE,
         WERKS(4)     TYPE C,                               "Plaint   4
         MATNR(18)    TYPE C,             "Material Number 18
         EKGRP(3)     TYPE C,             "Purchase Group 3
         LIFNR(10)    TYPE C,             "Vendor code     10
         VDATU        LIKE EORD-VDATU,    "Vendor valid from 10
         BDATU        LIKE EORD-BDATU,    "Vendor valid to   10
         MARK(1)      TYPE C,             "Mark
         KSCHL(4)     TYPE C,             "Condition type 4
         KBETR(18)    TYPE C,             "Rate price      11
         KPEIN(5)     TYPE C,             "Rate unit       5
         KONWA(5)     TYPE C,             "Currency        5
         KMEIN(3)     TYPE C,             "Condition Unit 3
         DATAB        LIKE A018-DATAB,    "Condition from 10
         DATBI        LIKE A018-DATBI,    "Condition to    10
       END OF LINE.
*Local Data Object Define
DATA: WK_CNT TYPE I,                   "Count variable
       WK_LVL TYPE I,                   "BOM level
       WK_QTY TYPE I.                   "BOM component qty
DATA: WK_LIFNR LIKE EORD-LIFNR,
      WK_MATNR LIKE MARC-MATNR.
*Internal Table define
DATA TAB_STACK LIKE STANDARD TABLE OF WK_STACK.   "STACK TABLE
DATA TAB_BOM   LIKE STANDARD TABLE OF WK_BOM.     "FOR BOM
DATA TAB_DATA LIKE STANDARD TABLE OF DATAITEM.   "FOR ALL
Parameter in Block1
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.         "TITLE TEXT-001.
PARAMETERS:
P_WERKS LIKE MARC-WERKS DEFAULT 'WX01',              "Plant
P_STLTY LIKE STPO-STLTY DEFAULT 'M',                 "BOM Category
P_MATNR LIKE MARC-MATNR OBLIGATORY,                  "Material
P_STDAT LIKE EORD-VDATU OBLIGATORY DEFAULT SY-DATUM. "Standard Date
SELECTION-SCREEN END OF BLOCK B1.
Parameter in Block2
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: P_SCREEN RADIOBUTTON GROUP R1.     "Screen output
SELECTION-SCREEN COMMENT 03(21) TEXT-001.
SELECTION-SCREEN POSITION 32.
PARAMETERS: P_FILE RADIOBUTTON GROUP R1.       "NTFILE output
SELECTION-SCREEN COMMENT 34(17) TEXT-002.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
Parameter in Block3
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME.
PARAMETERS:
P_NTFILE(45) TYPE C    LOWER CASE OBLIGATORY.
P_PCFILE      LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END   OF BLOCK B3.
INITIALIZATION
INITIALIZATION .
CLEAR : WK_CNT,
           WK_LVL,
           WK_QTY,
           WK_MATNR,
           WK_STACK,
           WK_BOM,
           DATAITEM.
WK_LVL = 0.
WK_QTY = 1.
REFRESH: TAB_STACK,
           TAB_DATA,
           TAB_BOM.
*&      AT SELECTION-SCREE ON VALUE-REQUEST
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_NTFILE.
PERFORM F_SHOW_FILE_POPUP CHANGING P_NTFILE.       "Popup display
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PCFILE.
PERFORM F_FILENAME_GET USING P_PCFILE
                      CHANGING P_PCFILE.
*&      Form F_FILENAME_GET
--> ST_DAT_PATH     : Preset path
<-- ST_DAT_FILENAME : Selected file name
FORM F_FILENAME_GET USING st_dat_path
                 CHANGING st_dat_filename.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_filename     = SPACE
      def_path         = st_dat_path
      mask             = ',.,.,'
      mode             = '0'
      title            = 'TXT-file select'
    IMPORTING
      filename         = st_dat_filename
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
IF sy-subrc <> 0.
    MESSAGE s002(yf1) WITH 'F_FILENAME_GET' sy-subrc.
ENDIF.
ENDFORM.                    "F_FILENAME_GET
MAIN PROCESS
START-OF-SELECTION.
---- Check material -
PERFORM CHECK_PROD.
---- get vendor data -
PERFORM GET_VENDOR_DATA.
---- output screen/file -
IF P_SCREEN = 'X'.
    PERFORM SET_OUTPUT.            "Output to screen directly
ELSEIF P_FILE = 'X'.
    IF P_PCFILE <> ''.
      PERFORM DOWNLOAD_DATA.       "Write data into ntfile
    ELSE.
      MESSAGE E007(00) WITH 'P_PCFILE'.
    ENDIF.
ENDIF.
END-OF-SELECTION.
ULINE (142).
WRITE: /002 'Component Material Count:', WK_CNT.
TOP-OF-PAGE
TOP-OF-PAGE.
WRITE: /002 'Product:', 013 P_MATNR,
          030 '****** BOM Price List ******',
          070 SY-DATUM,
          095 'PAGE:',
          100 SY-PAGNO.
ULINE (142).
WRITE: /001   '|Level',
          007   '|Material',
          026   '|Cat',
          030   '|Quantity',
          044   '|From',
          055   '|To',
          066   '|PurG',
          071   '|Vendor',
          082   '|MK',
          085   '|Price',
          101   '|Crncy',
          107   '|UnitQty',
          115   '|Unit',
          120   '|From',
          131   '|To',
          142   '|'.
ULINE (142).
*&FORM CHECK_PROD
text
-->p1      text
<--p2      text
FORM CHECK_PROD.
SELECT SINGLE * FROM MARC
                 WHERE WERKS = P_WERKS           " Plant
                 AND   MATNR = P_MATNR           " Material
                 AND   DISPR IN ('F100','F200'). " Product
IF SY-SUBRC = 0.
    PERFORM CHECK_BOM1 USING MARC-MATNR MARC-WERKS. " CHECK_BOM1
ELSE.
    MESSAGE E022.
ENDIF.
ENDFORM.                                         " CHECK_PROD
*&FORM CHECK_BOM1
text
-->p1      text
<--p2      text
FORM CHECK_BOM1 USING VALUE(FP_MATNR) VALUE(FP_WERKS).
SELECT SINGLE * FROM MAST
                  WHERE MATNR = FP_MATNR     AND      "Material
                        WERKS = FP_WERKS.             "Plant
IF SY-SUBRC = 0.
    PERFORM PUSH_STACK USING WK_LVL WK_QTY.   "Save parent attribute
    PERFORM CHECK_BOM2 USING MAST-STLNR.                    "Check BOM2
ENDIF.
ENDFORM.                                                    "CHECK_BOM1
*&FORM CHECK_BOM2
text
-->p1      text
<--p2      text
FORM CHECK_BOM2 USING VALUE(FP_STLNR).
SELECT * FROM STPO
           WHERE STLTY = P_STLTY        AND        "BOM category
                 STLNR = FP_STLNR.                 "BOM number
    PERFORM POPOUT_WK.                  "Pop out to work area
    WK_BOM-LEVEL = WK_LVL.              "Current BOM level
    WK_BOM-MATNR = STPO-IDNRK.          "Material number
    WK_BOM-POSTP = STPO-POSTP.          "ITEM Category
    WK_QTY       = STPO-MENGE * WK_QTY. "For Stack
    WK_BOM-MENGE = WK_QTY.              "BOM Component qty
    PERFORM CHECK_BOM3 USING STPO-STLTY STPO-STLNR STPO-STLKN.
    PERFORM CHECK_BOM1 USING STPO-IDNRK P_WERKS.
ENDSELECT.
PERFORM POPOUT_STACK.
ENDFORM.                                                    "CHECK_BOM2
*&FORM CHECK_BOM3
text
-->p1      text
<--p2      text
FORM CHECK_BOM3 USING VALUE(FP_STLTY) VALUE(FP_STLNR) VALUE(FP_STLKN).
SELECT SINGLE * FROM STAS
                  WHERE STLTY = FP_STLTY        "BOM category
                  AND   STLNR = FP_STLNR        "BOM number
                  AND   STLKN = FP_STLKN        "BOM item
                  AND   DATUV <= P_STDAT        "Valid from
                  AND   LKENZ = ' ' .           "Valid
IF SY-SUBRC = 0.
    WK_BOM-DATUV = STAS-DATUV.                  "Valid from
ENDIF.
SELECT SINGLE * FROM STAS
                  WHERE STLTY = FP_STLTY        "BOM category
                  AND   STLNR = FP_STLNR        "BOM number
                  AND   STLKN = FP_STLKN        "BOM item
                AND   DATUV > P_STDAT         "Valid from
                  AND   LKENZ = 'X' .           "Invalid
IF SY-SUBRC = 0.
    SELECT SINGLE * FROM STAS
                   WHERE STLTY = FP_STLTY        "BOM category
                   AND   STLNR = FP_STLNR        "BOM number
                   AND   STLKN = FP_STLKN        "BOM item
                   AND   DATUV > P_STDAT         "Valid from
                   AND   LKENZ = 'X' .           "Invalid
    IF SY-SUBRC = 0.
      WK_BOM-DATUB = STAS-DATUV.          "Valid to
      APPEND WK_BOM TO TAB_BOM.
    ENDIF.
ELSE.
    WK_BOM-DATUB = '99991231'.          "Manul input
    APPEND WK_BOM TO TAB_BOM.
ENDIF.
ENDFORM.                                                    "CHECK_BOM3
*&FORM PUSH_STACK
text
-->p1      text
<--p2      text
FORM PUSH_STACK USING VALUE(FP_LVL) VALUE(FP_QTY).
WK_STACK-LEVEL = FP_LVL + 1.
WK_STACK-QUANT = FP_QTY.
APPEND WK_STACK TO TAB_STACK.    "Push stack
SORT TAB_STACK BY LEVEL.         "Sort table by level
ENDFORM.                           "PUSH_STACK
*&FORM PUSH_STACK
text
-->p1      text
<--p2      text
FORM POPOUT_STACK.
DESCRIBE TABLE TAB_STACK LINES WK_CNT.
IF WK_CNT > 0.
    DELETE TAB_STACK INDEX WK_CNT.     "Popout stack
    SORT TAB_STACK BY LEVEL.           "Sort table by level
ENDIF.
ENDFORM.                               "POPOUT_STACK
*&FORM POPOUT_WK
text
-->p1      text
<--p2      text
FORM POPOUT_WK.
DESCRIBE TABLE TAB_STACK LINES WK_CNT.
IF WK_CNT > 0.
    READ TABLE TAB_STACK INTO WK_STACK INDEX WK_CNT.   "Popout stack
    IF SY-SUBRC = 0.
      WK_LVL = WK_STACK-LEVEL.                         "Current Level
      WK_QTY = WK_STACK-QUANT.                         "Parent Qty
    ENDIF.
ENDIF.
ENDFORM.                    "POPOUT_WK
*&FORM DOWNLOAD_DATA
text
-->p1      text
<--p2      text
FORM DOWNLOAD_DATA.
DATA: L_RETURN     TYPE   SY-SUBRC.
PERFORM GUI_DOWNLOAD
              TABLES
                 TAB_DATA
              USING
                 P_PCFILE
                 'X'
              CHANGING
                 L_RETURN.
IF L_RETURN <> 0.
    MESSAGE S020.
ELSE.
    MESSAGE S021.
ENDIF.
ENDFORM.                    " DOWNLOAD_DATA
*&FORM GET_VENDOR_DATA
text
-->p1      text
<--p2      text
FORM GET_VENDOR_DATA.
LOOP AT TAB_BOM INTO WK_BOM.
    CLEAR DATAITEM.
    SELECT * FROM MARC
            WHERE WERKS = P_WERKS             "Plant
              AND MATNR = WK_BOM-MATNR.       "Material
      DATAITEM-EKGRP = MARC-EKGRP.
      SELECT SINGLE * FROM MARA
                      WHERE MATNR = MARC-MATNR    AND   "Material number
                            MTART IN ('1211','1221').
      IF SY-SUBRC = 0.
        SELECT COUNT(*) FROM EORD
                       INTO (WK_CNT)
                 WHERE WERKS = P_WERKS        AND "Plaint
                       MATNR = WK_BOM-MATNR   AND "Material
                       VDATU <= P_STDAT        AND "Valid-From
                       BDATU > P_STDAT.            "Valid-To
        IF WK_CNT > 1.
          DATAITEM-MARK = '*'.
        ELSEIF WK_CNT = 0.
          MOVE-CORRESPONDING WK_BOM TO DATAITEM.
          APPEND DATAITEM TO TAB_DATA.
        ENDIF.
        SELECT * FROM EORD
                 WHERE WERKS = P_WERKS        AND "Plaint
                       MATNR = WK_BOM-MATNR   AND "Material
                       VDATU <= P_STDAT        AND "Valid-From
                       BDATU > P_STDAT.            "Valid-To
          MOVE-CORRESPONDING WK_BOM TO DATAITEM.
          DATAITEM-LIFNR = EORD-LIFNR.             "Vendor code
          SELECT * FROM A018
                    WHERE LIFNR = EORD-LIFNR AND "Vendor code
                          MATNR = EORD-MATNR AND "Material
                          EKORG = EORD-EKORG AND "Purchase org
                          DATAB <= P_STDAT     AND "Valid-from
                          DATBI >   P_STDAT.         "Valid-to
            DATAITEM-DATAB = A018-DATAB.    "Condition From
            DATAITEM-DATBI = A018-DATBI.    "Condition To
            IF SY-SUBRC = 0.
              SELECT * FROM KONP
                       WHERE KNUMH = A018-KNUMH   AND   "Cnd Number
                             KSCHL = A018-KSCHL   AND   "Cnd Type
                             KAPPL = A018-KAPPL.        "Cnd Cat
                DATAITEM-KBETR = KONP-KBETR.            "Price
                DATAITEM-KONWA = KONP-KONWA.            "Currency
                DATAITEM-KPEIN = KONP-KPEIN.            "Price Unit
               DATAITEM-KMEIN = KONP-KMEIN.            "Unit of Material
                APPEND DATAITEM TO TAB_DATA.            "Append TAB_DATA
              ENDSELECT.
            ENDIF.
          ENDSELECT.
        ENDSELECT.
      ELSE.
        MOVE-CORRESPONDING WK_BOM TO DATAITEM.
        APPEND DATAITEM TO TAB_DATA.
      ENDIF.
    ENDSELECT.
    IF SY-SUBRC <> 0.
      MOVE-CORRESPONDING WK_BOM TO DATAITEM.
      APPEND DATAITEM TO TAB_DATA.
    ENDIF.
ENDLOOP.
ENDFORM.                    "GET_DATA
*&      Form SET_OUTPUT
      text
--> p1        text
<-- p2        text
FORM SET_OUTPUT .
CLEAR WK_CNT.
LOOP AT TAB_DATA INTO DATAITEM.
    WRITE: /001   '|', 002 DATAITEM-LEVEL,   "Material Number
            007   '|', 008 DATAITEM-MATNR,   "Purchase Grp
            026   '|', 027 DATAITEM-POSTP,   "Item category
            030   '|', 031 DATAITEM-MENGE,   "BOM Component qty
            044   '|', 045 DATAITEM-DATUV,   "BOM valid from
            055   '|', 056 DATAITEM-DATUB,   "BOM valid to
            066   '|', 067 DATAITEM-EKGRP,   "Purchase Org
            071   '|', 072 DATAITEM-LIFNR,   "Vendor
            082   '|', 083 DATAITEM-MARK,    "Mark flag
            085   '|', 086 DATAITEM-KBETR,   "Price
            101   '|', 102 DATAITEM-KONWA,   "Currency
            107   '|', 108 DATAITEM-KPEIN,   "Unit Qty
            115   '|', 116 DATAITEM-KMEIN,   "Unit OM
            120   '|', 121 DATAITEM-DATAB,   "Cnd From
            131   '|', 132 DATAITEM-DATBI,   "Cnd To
            142   '|'.
    WK_CNT = WK_CNT + 1.
ENDLOOP.
ENDFORM.                    " SET_OUTPUT

Prabhu Peram,
Thanks very much.
I want to show an idea of BOM explosion by constructing a stack.
BOM explosion uses first-root-searching and pushes the "root" material into stack.If the "root" has no left-child,pops out the "root" material and searchs the right-child....and completes the entire BOM explosion.
Message was edited by:
        Mic chen
Message was edited by:
        Mic chen

CS11- BOM explosion with status inactive

When a BOM is marked as inactive( at the header level), the BOM explosion using CS11 is not possible. The systems says there is no effective BOM. However I can pull up the same using CS03 and drill down level by level.
Is this standard SAP behaviour? Are there any settings in Customizing that will make the explosion for inactive BOM's using CS11 possible?

Alternative to select inactive BOM
BOM status = inactive in BOM header
In OS31
Create a selection ID = 09, selection priority = 1, BOM usage = 1
OS 30
Create a BOm application copy from PP01 let us say ZP01
In which enter the selection ID = 09, what you created before
Remove all the ticks of check BOM
Save
That is all.
In cs11, select the application as ZP01 and you will get the BOM explosion.

Multi level BOM explosion

Hi,
For multilevel BOM explode I have to use the "Functional Module" CS_BOM_EXPL_MAT_V2. I checked it in system but I didnt understand which input parameters I need to give (Which are mandatory) as ther are lot of input fields available.
Please suggest whether this Functional Module is fine OR there is any other way? also suggest about the input field data.

Dear
Function module CS_BOM_EXPL_MAT_V2 is used for BOM explosion for a given material. It belongs to function group CSS4 u2013 BOM explosions. This function module can explose multi-level BOM with a given validation date.
You need to specify necessary input parameters to call this function module, such as CAPID u2013 App ID, DATUV u2013 Validation date, MEHRS u2013 Multi-level, MTNRV u2013 Material number, STLAL u2013 alternate, STLAN u2013 BOM usage.
Some useful tables you can provide to your ABAPer and discuss the same .
TABLES: MARA,                               "Master Data
        MAKT,                               "Matl Desc.
        MARC,                               "Plant Data for Matl.
        MAST,                               "Bom to material link
        STKO,                               "Bom Header
        STPO.                               "Bom Item
Refer : Multi-level BOM explosion using CS_BOM_EXPL_MAT_V2
Regards
JH
Edited by: Jiaul Haque on Jan 3, 2011 10:24 PM

Adding new items in ME21N using USEREXIT/BADI with BOM explosion

I have following business scenario. There is purchase requisition consisting just one material. In ME21N we are creating new purchase order. This purchase order needs to consist that item (we drag&drop this item from purchase requisition).
The problem is, that this item is in fact BOM, so we would like to explode it and select just some entries from them basing on some Z* configuration and we can't use standard BOM explosion from ME21N.
The idea to solve that issue is following:
1. Explode there BOM for material;
2. Filter out not needed items from that explosion using Z-config table;
3. Copy filtered items using USER-EXIT / BADI , ENHANCEMENT-SPOT into purchase order items.
The best, if this USER-EXIT / BADI, ENHANCEMENT-SPOT will be used only when drag&drop purchase requisition item into new purchase order.
The point is that I'm not able to find out such USER-EXIT, BADI or ENHANCEMENT-SPOT.
P.S. There is for instance exit "MM06E007 Change document for requisitions upon conversion into PO", but interface of that exit completely doesn't fit my needs.
Any ideas?

Hello Tomasz Suchanek ,
There is no BADI/ Enhancement Spots / User Exits that you can use for this requirement.
You are trying to change the SAP standard Functionality.
You need to contact SAP for consulting .
Thanks,
Greetson

Use of CS_BOM_EXPL_MAT_V2 fro BOM explosion on plant basis

hello ,
   I dont have any documentation for this FM and need to use it for BOM explosion on plant basis plz let me knw how to use it?

Try something like this :
*     Tables "call CS_BOM_EXPL_MAT_V2 "
DATA: BEGIN OF t_stb OCCURS 0.
        INCLUDE STRUCTURE stpox.
DATA: END OF t_stb.
DATA: BEGIN OF matcat OCCURS 50.
        INCLUDE STRUCTURE cscmat.
DATA: END OF matcat.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      auskz                 = ' '
      capid                 = 'PP01'
      datuv                 = sy-datum
      emeng                 = '1.000'
      stlan                 = '1'
      stlal                 = mast-stlal
      mtnrv                 = matnr
      mehrs                 = 'X'
      mmory                 = '1'
      stpst                 = '0'
      werks                 = werks
    IMPORTING
      topmat                = selpool
      dstst                 = dstst_flg
    TABLES
      stb                   = stb
      matcat                = matcat
    EXCEPTIONS
      material_not_found    = 4
      no_plant_data         = 8
      no_bom_found          = 12
      no_suitable_bom_found = 16.
Hope this helps,
Erwan

How to use the select option to get the multiple bom explosion

hi friends,
          i have completed the bom exp using parameters to get one material
input,but i need to adopt select option to give from and to materials
i ll gives from and to materials with description and bom deails
i here gave the coding also, pl give me a suggestion how to adpot the select
optoins instead of parameters ,very urgent
REPORT PP_BOM_EXPLOSION.
tables :mara,marc,stpo.
TYPE-POOLS : SLIS.
*parameters: p_werks like t001w-werks obligatory.
SELECT-OPTIONS : p_matnr FOR mara-matnr obligatory.
**select-options : p_matnr for mara-matnr obligatory.
PARAMETERS : P_WERKS LIKE T001W-WERKS OBLIGATORY,
        P_MATNR LIKE MARA-MATNR OBLIGATORY.
*parameters: p_werks like marc-werks obligatory,
*p_matnr like marc-matnr obligatory.
constants c_x value 'X'.
data: begin of it_comp occurs 0,
matnr like mara-matnr,
maktl like makt-maktx,
idnrk like stpox-idnrk,
ojtxp like stpox-ojtxp,
menge like stpox-menge,
meins like stpox-meins,
matkl like stpox-matmk,
end of it_comp.
data : topmat like cstmat.
data: w_topmat like cstmat.
DATA : IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
DATA : IT_EVENTCAT TYPE SLIS_T_EVENT.
DATA : WA_EVENTCAT_LN LIKE LINE OF IT_EVENTCAT.
DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: S_COL_POS TYPE I.
start-of-selection.
perform explode_assembly.
PERFORM BUILD_FIELDCATALOG.
PERFORM DATA_DISPLAY.
*end-of-selection.
*perform write_report.
*top-of-page.
*perform print_header.
*form print_header.
*write: /(18) 'Component'(h00),
*(40) 'Description'(h01),
*'Mat.Group'(h02),
*(18) 'Quantity'(h03).
*uline.
*endform.
*form write_report.
*write: / w_topmat-matnr under text-h00 color col_heading,
*w_topmat-maktx under text-h01 color col_heading.
*loop at it_comp.
*write: /
*it_comp-idnrk under text-h00,
*it_comp-ojtxp under text-h01,
*it_comp-matkl under text-h02,
*it_comp-menge unit it_comp-meins under text-h03,
*it_comp-meins.
*endloop.
*uline.
*endform.
form explode_assembly.
data: it_stb like stpox occurs 0 with header line,
it_stb2 like stpox occurs 0 with header line,
it_stb3 like stpox occurs 0 with header line,
w_msg(255) type c.
SELECT MATNR FROM MARA INTO CORRESPONDING FIELDS OF TABLE IT_MARA
                           WHERE MATNR IN P_MATNR.
Explode highest level:
*LOOP AT IT_MARA.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
auskz = c_x
capid = 'PP01'
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
BGIXO = c_x
MKMAT = c_x
MMAPS = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = P_MATNR
werks = p_werks
importing
topmat = w_topmat
tables
stb = it_stb
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
*write: / w_msg.
exit.
endif.
Don't process documents
delete it_stb where idnrk is initial.
Don't process valid from furure:
delete it_stb where datuv >= sy-datum.
Explode phantom assemblies up to last level
*do.
it_stb2[] = it_stb[].
*delete it_stb2 where dumps is initial.
*if it_stb2[] is initial.
*exit.
*endif.
*delete it_stb where not dumps is initial.
delete it_stb where VPRSV <> 'S' OR MMSTA = '61'.
loop at it_stb2.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
capid = 'PP01'
auskz = c_x
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = it_stb2-idnrk
werks = p_werks
tables
stb = it_stb3
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
*write: / w_msg.
else.
delete it_stb3 where idnrk is initial.
delete it_Stb3 where sobsl = 50.
loop at it_stb3 .
multiply it_stb3-menge by it_stb2-menge.
modify it_stb3 transporting menge.
endloop.
append lines of it_stb3 to it_stb.
endif.
*ENDLOOP.
endloop.
*enddo.
Build table of components collecting the same components from
all levels
loop at it_stb.
it_comp-matkl = it_stb-matmk.
it_comp-idnrk = it_stb-idnrk.
it_comp-ojtxp = it_stb-ojtxp.
it_comp-menge = it_stb-menge.
CALL FUNCTION 'CONVERSION_EXIT_CUNIT_OUTPUT'
    EXPORTING
    INPUT                = IT_STB-MEINS
    LANGUAGE             = SY-LANGU
    IMPORTING
LONG_TEXT            =
   OUTPUT               = IT_STB-MEINS
SHORT_TEXT           =
EXCEPTIONS
   UNIT_NOT_FOUND       = 1
   OTHERS               = 2
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
it_comp-meins = it_stb-meins.
collect it_comp.
clear it_comp.
endloop.
*READ TABLE IT_COMP INDEX 1.
*IF SY-SUBRC = 0.
IT_COMP-MATNR = w_topmat-matnr.
IT_COMP-MAKTL = w_topmat-maktx.
INSERT IT_COMP index 1.
*ENDIF.
ENDFORM.
FORM TO APPEND DATA INTO ALV FORM
FORM BUILD_FIELDCATALOG.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Component'.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Component'.
*loop at it_comp.
   PERFORM BUILD_FIELDCAT USING 'MATNR' 'Material'.
PERFORM BUILD_FIELDCAT USING 'MAKTL' 'Material Description'.
PERFORM BUILD_FIELDCAT USING 'IDNRK' 'Component'.
PERFORM BUILD_FIELDCAT USING 'OJTXP' 'Description'.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Material Group'.
PERFORM BUILD_FIELDCAT USING 'MENGE' 'Quantity'.
PERFORM BUILD_FIELDCAT USING 'MEINS' 'Unit Of MEASUREMENT'.
*endloop.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM BUILD_FIELDCAT USING L_FIELDNAME LIKE DD03L-FIELDNAME S_TEXT LIKE DD03P-SCRTEXT_M.
CLEAR WA_FIELDCAT_LN.
ADD 1 TO S_COL_POS.
WA_FIELDCAT_LN-REF_TABNAME = 'IT_COMP'.
WA_FIELDCAT_LN-FIELDNAME    = L_FIELDNAME.
WA_FIELDCAT_LN-SELTEXT_M    = S_TEXT.
WA_FIELDCAT_LN-COL_POS      = S_COL_POS.
WA_FIELDCAT_LN-QFIELDNAME   = SPACE.
WA_FIELDCAT_LN-HOTSPOT      = SPACE.
WA_FIELDCAT_LN-JUST         = 'R'.
APPEND WA_FIELDCAT_LN TO IT_FIELDCAT.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM DATA_DISPLAY.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      = TEXT-001
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   IT_FIELDCAT                       = IT_FIELDCAT
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = IT_COMP
   EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
Thanks in advance
                                                                                Regards
senthilkumar D

tables :mara,marc,stpo.
parameters: p_werks like t001w-werks obligatory.
*p_matnr like mara-matnr obligatory.
*select-options : p_matnr for mara-matnr obligatory.
select-options : P_matnr for mara-matnr.
*parameters: p_werks like marc-werks obligatory,
*p_matnr like marc-matnr obligatory.
constants c_x value 'X'.
data: begin of it_comp occurs 0,
idnrk like stpox-idnrk,
ojtxp like stpox-ojtxp,
menge like stpox-menge,
meins like stpox-meins,
matkl like stpox-matmk,
end of it_comp.
data: w_topmat like cstmat.
data : begin of itab occurs 0,
        matnr like mara-matnr,
        end of itab.
*data : itab type table of mara with header line.
start-of-selection.
perform explode_assembly.
end-of-selection.
perform write_report.
top-of-page.
perform print_header.
form print_header.
write: /(18) 'Component'(h00),
(40) 'Description'(h01),
'Mat.Group'(h02),
(18) 'Quantity'(h03).
uline.
endform.
form write_report.
write: / w_topmat-matnr under text-h00 color col_heading,
w_topmat-maktx under text-h01 color col_heading.
loop at it_comp.
write: /
it_comp-idnrk under text-h00,
it_comp-ojtxp under text-h01,
it_comp-matkl under text-h02,
it_comp-menge unit it_comp-meins under text-h03,
it_comp-meins.
endloop.
uline.
endform.
form explode_assembly.
data: it_stb like stpox occurs 0 with header line,
it_stb2 like stpox occurs 0 with header line,
it_stb3 like stpox occurs 0 with header line,
w_msg(255) type c.
select matnr from mara into table itab where matnr between p_matnr-low and p_matnr-high.
loop at p_matnr.
itab-matnr = p_matnr-low.
   append itab.
   itab-matnr = p_matnr-high.
   append itab.
   clear itab.
   endloop.
Explode highest level:
loop at itab.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
auskz = c_x
capid = 'PP01'
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
BGIXO = c_x
MKMAT = c_x
MMAPS = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = itab-matnr
werks = p_werks
importing
topmat = w_topmat
tables
stb = it_stb
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
write: / w_msg.
exit.
*else.
endif.
loop at it_stb.
it_comp-matkl = it_stb-matmk.
it_comp-idnrk = it_stb-idnrk.
it_comp-ojtxp = it_stb-ojtxp.
it_comp-menge = it_stb-menge.
it_comp-meins = it_stb-meins.
collect it_comp.
clear it_comp.
endloop.
endloop.
endform.
i got the low and high from selectoption and then move it into itab.
then i pass itab-matnr into fm. using loop.
but i got only one output
but ineet to got from and to output.
give me a solution
Regards
ds

Comp. Backflush using Comp. Scrap(No BOM explosion(manual comp. entry))

Hi Friends,
*Component Backflush + MFBF Functionality:*
Go to MFBF --> Select the radio button COMPONENT BACKFLUSH --> and click on
COMPONENT SCRAP (application toolbar).
Now select the radio button NO BOM EXPLOSION(manual comp. entry).
Enter the Material Number and Production Version.
Now click on PROCESS COMPONENT LIST (application toolbar).
Enter Material, Quantity, UOM, Storage Location, Reason Code and press ENTER.
By default the movement type will be '551'.
Now when you click on SAVE button on the top. It will give you a material
document number.
I have created a new FM according to the standard component backflush functionality and called the BAPI BAPI_REPMANCONF1_CREATE_MTS in my Z FM. But the functionality of the standard BAPI is not giving expected results.
I would appreciate if someone who had gone thru the same situaton could help me. I have done my research in different ways. But ended up finding none. Is there any other BAPI or procedure to achieve the above scenario.
Thanks.

Hi Keshav,
Thanks for getting back to me.
Below is how I populated the data.
"I am not populating Backflush quantity and UOM because according to my
"standard MFBF functionality I have choose NO BOM EXPLOSION(manual comp. entry)
FLAGS-BCKFLTYPE       = '12'.
FLAGS-COMPONENTS_TYPE = '1'.
GENDATA-POSTDATE    = SY-DATUM.
GENDATA-DOCDATE      = SY-DATUM.
GENDATA-MATERIALNR = MATERIAL.
GENDATA-PRODPLANT   = PLANT.
GENDATA-PRODVERSION   = VERSION.
"Z_IMPORT_TABLES is the custom structure which I have declared at TABLES in FM
"I_GOODS is of type BAPI2017_GM_ITEM_CREATE
LOOP AT Z_IMPORT_TABLES.
WA_GOODS-MATERIAL    = Z_IMPORT_TABLES-MATERIAL.
WA_GOODS-PLANT          = Z_IMPORT_TABLES-PLANT.
WA_GOODS-STGE_LOC   = Z_IMPORT_TABLES-STGE_LOC.
WA_GOODS-MOVE_TYPE = Z_IMPORT_TABLES-MOVE_TYPE.
WA_GOODS-ENTRY_QNT = Z_IMPORT_TABLES-ENTRY_QNT.
WA_GOODS-ENTRY_UOM = Z_IMPORT_TABLES-ENTRY_UOM.
WA_GOODS-MOVE_REAS = Z_IMPORT_TABLES-MOVE_REAS.
APPEND WA_GOODS TO I_GOODS.
ENDLOOP.
CALL FUNCTION 'BAPI_REPMANCONF1_CREATE_MTS'
    EXPORTING
      BFLUSHFLAGS       = FLAGS
      BFLUSHDATAGEN = GENDATA
    IMPORTING
      CONFIRMATION   = CONFIRMATION
      RETURN               = RETURN             ---------> error in this parameter
    TABLES
      GOODSMOVEMENTS = I_GOODS.
When I execute this in debug mode, it is giving me an error in my RETURN parameter asking me to enter the backflush quantity and UOM which doesn't suits my scenario.
Appreciate if you could let me know where I am doing wrong in my code and guide me in a better way to achieve this.
Thanks.

BOM Explosion for Multiple Process Orders

Hi,
I hope someone can assist me with the following: Is there a report I can run or transaction I can do to have BOM explosion for multiple Process Orders? I would like to input process orders for a week and see the BOM details per PO.
Thanks

Dear Sukendar,
1.For this requirement you have to go for a Z report and you can give the Functional Spec's to prepare
this report to your ABAP consultant.Prepare the input format,logic of the program and the output format.
In the logic part you can make use of this Functional Modules's CSAP_MAT_BOM_READ or
CSEP_MAT_BOM_READ or CS_BOM_EXPLOSION or CS_BOM_EXPL_MAT_V2 .
2.Using CEWB helps you to identify all the material that's having the BOM,but here the report does not
shows you the level by level by BOM for a FERT.
Check and revert back.
Regards
Mangalraj.S

MRP RUN- KIT BOM explosion not working

We setup one layer BOM’s for our maintenance KITs as parent material and components as child material. For example KIT is TS10000-K1 and components are TS10001, TS10002 etc setup as next layer with in the BOM. Both KITS and components are defined as material types ERSA (Spare parts). These one layers BOMs are setup as production BOMs and expected to create purchase requisitions for KITS and components by exploding BOMs during MRP runs. We use purchase requisitions and convert them into POs to procure both KITS and components. We DO NOT USE Panned orders and Production orders.
The safety stocks / reorder point are considered as demand for KITS and components as we do not have any external demand for KITS and components.
MRP run is creating purchase requisitions automatically for both KITS and components as per safety stocks and reorder point defined in MRP Views of Material Master. This is working as expected.
The issue is: KIT BOM’s are not exploding to generate purchase requisitions for the dependent components of KIT BOM. Please suggest the way to resolve this issue.
Split valuation: Also we plan to use split valued KITS with both new and refurbished. So we need BOM explosion for split valued KITS
also (after the 1st issue is resolved).
I verified the following items to make sure the required configuration and data setup is defined correctly.
1) Planning file activated Plant - OMDU
2) Executed MRP run with Total Planning - MDBT and MD02 (single item, multiple levels)
3) BOM explosion for MRP activated- OS23
4) MRP type in MRP1 view- PD and VB (I tried both separately but BOM is not exploding).
5) Procurement type “F” (MRP 2 view) and lot size “EX”
6) Planning strategy in MRP 3 view (tested w/o planning strategy and with strategies 10 and 40. But BOM is not exploded)
7) BOM status and usage (status is active and usage is for production-CS02 and OS20)
8) BOM Validity date (Valid)
9) BOM structure in CS12 (BOM is exploding in CS11)
10) Availability check
11) Selection of BON ID to have BOM usage indicator assign (OS31).
12) No alternate BOMs or production versions or work scheduling view are used.
Please review the above 2 issues and suggest any workable solution. Thanks in advance!
NOTE: I extensively used MRP with multi-level BOM explosion in my earlier projects without any issue. However the above issue is a bit strange why one layer BOM is not exploded in this case.
Regards
Srini

Hi
Thanks for your response. I reviewed all SAP notes and none of them are applicable to my scenario.
1808396 - BOM changes not considered by MRP: I have not changed BOMs.
1781324 - MD11: Valid BOM alternative is not found. We do not have alternative BOMs.
1791009 - No BOM explosion after changing production version: We am not using production versions.
Our Material KITS are PM spare assemblies set up as BOMs and consists of individual spare parts as components. We are creating purchase requisitions and not planned orders. We are not using PP functionality/Production orders.
MRP is generating purchase requisitions for KITS and components as per ROP and safety stocks. In other words it is working as expected. The issue is BOMs which are parent assemblies are not exploding to the next lower level components.
Please note that I am not getting any error messages when MRP is executed.
Regards
Srini.

Report for Cost of Multiple products with Multilevel BOM explosion

Hi,
Our client has a requirement of a report showing standard cost estimate of multiple FG products, with multi-level BOM explosion.
In short, the requirement is to get a CK13N report for multiple products.
Has anyone come across such requirement? The requirements seems to be very normal.
But, I have not seen any standard report for the same. If there is any, please suggest.
or suggest a better solution for the same.
Thanks in advance. Pts guaranteed.

Hi,
I totally agree with you that this is a totally vague requirement.
However, let me share the reason for such client requirement.
We have a customer, for which we produce certain parts for select models. Now, the arrangement with customer for pricing is based on the raw material and other production cost for all such parts. Based on the fluctuations in cost, the pricing would be finalised.. on a monthly or quarterly basis.
For this purpose, the customer requires to know the raw materials used in each of the part.
Individually it could have been managed. But the price change in terms of % is decided at global level and not for each part.
Please suggest

Routing details with bom explosion

hi friends
i have developend the report for pp,in routing details
how to get the details of bom explosion with workcenter and routing operations
If procurement type is E or X, system has to check the routing through CA03.
If procurement type if F, leave this field as blank and then fetch the relevant vendor
CS_BOM_EXPL_MAT_V2 - using this fm to get the bom explosion
after that how to relate between workcenter and routing details.
input is material number
plant
1.operator
2.material - i got through fm
3.material description i got through fm
4.workcenter
5.vendor
6.operation description
7.uom -i got through fm
8.qty - i got through fm
9.uom
10.setuptime
11.processingtime
12.deliverytime
code for review.
TABLES : MAST
DATA: BEGIN OF ISTPO OCCURS 1000.
INCLUDE STRUCTURE STPOX.
DATA: END OF ISTPO.
DATA: BEGIN OF MATCAT OCCURS 1000.
INCLUDE STRUCTURE CSCMAT.
DATA: END OF MATCAT.
DATA: W_TOPMAT LIKE CSTMAT.
SELECT-OPTIONS : P_MATNR FOR MAST-MATNR.
PARAMETERS : P_WERKS TYPE MAST-WERKS.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MAST-MATNR,
WERKS LIKE MAST-WERKS,
END OF ITAB.
DATA: IT_STB LIKE ISTPO OCCURS 0 WITH HEADER LINE.
data : istpotemp like stpox occurs 0 with header line.
data : istpofinal like stpox occurs 0 with header line.
START-OF-SELECTION.
CLEAR ISTPO. REFRESH ISTPO.
SELECT MATNR WERKS FROM MAST INTO TABLE ITAB
WHERE MATNR IN P_MATNR AND WERKS = P_WERKS.
LOOP AT ITAB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
CAPID = 'PP01'
MEHRS = 'X'
MMAPS = ' '
MDMPS = ' '
BREMS = 'X'
DISMM = ' '
LIFNR = ' '
WEBAZ = ' '
DATUV = SY-DATUM
MTNRV = ITAB-MATNR
WERKS = P_WERKS
EMENG = '1'
STKKZ = ' '
FBSTP = ' '
FTREL = ' '
IMPORTING
TOPMAT = W_TOPMAT
TABLES
STB = ISTPO
MATCAT = MATCAT
EXCEPTIONS
ALT_NOT_FOUND = 1
CALL_INVALID = 2
MATERIAL_NOT_FOUND = 3
MISSING_AUTHORIZATION = 4
NO_BOM_FOUND = 5
NO_PLANT_DATA = 6
NO_SUITABLE_BOM_FOUND = 7
OTHERS = 8.
WRITE: / W_TOPMAT-MATNR UNDER TEXT-H00 COLOR COL_HEADING,
W_TOPMAT-MAKTX UNDER TEXT-H01 COLOR COL_HEADING.
sort istpo by index descending.
loop at istpo.
WRITE :/ ISTPO-POSNR,
ISTPO-IDNRK,
ISTPO-OJTXP,
ISTPO-MENGE,
ISTPO-MEINS,
endloop.
refresh istpo.
endloop.

HI,
i got the workcenter also,but i need to classify
if the material procurment type is E OR X CHECK FOR routing details
or else if its F THEN pick the vendor and uom -PLPO-VGE01,PLPO-PLIFZ.
how shall i implement this
Regards
ds

BOM explosion using CS_BOM_EXLP_MAT_V2.

Similar Messages

Maybe you are looking for