BoM for 5508 HA WLAN Solution
Greetings, i'm looking to deploy two Cisco 5508 WLC's in a HA pair and license them to support 150 2600e AP's.
Would the BoM below be sufficient? As i understand the HA controller doesnt need licensing as in the event of the primary controller failing they would be transfered to the backup controller.
15 x AIR-CAP2602E-EK910 - AP's
600 x AIR-ANT2524DW-R - Antenna
1 x AIR-CT5508-100-K9 - Cisco 5508 Controller (Primary)
1 x AIR-CT5508-HA-K9 - Cisco 5508 HA Controller (Standby)
1 x L-LIC-CT5508-50A - Adiitional 50 AP License
Regards
Wait a sec ... found something missing in your BoM.
Where's the SMARTnet for your 5508? Make sure you put one which includes the option for you to download the firmware for the 5508.
Do not bother getting maintenance contract for the APs because they are covered under Cisco's new Limited Lifetime Warranty (if you don't mind waiting for 10 business days before your replacment AP gets shipped out).
Similar Messages
-
Alternate Bom for a finished product has huge varience in cost estimate
Hi all
I have created alternate BOMs for a finished material. One is local raw materials and another has imported raw materials. Goods are produced using both these boms but in one period i can release cost estimate of one BOM. Thats why there is a huge variance in cost estimate when alternate BOM is used for the material. kindly give me a solution as to how i can fix this issue.
regards,
shahzadDear,
Please refer this link for,
[Costing with alternative BOM |Re: Costing with alternative BOM]
One thing you can do it with split valuation with batch managment please take help from CO person.
Regards,
R.Brahmankar -
Creation of Ibase for satellite systems in Solution Manager 4.0 SP13
Hello!
Can enybody help?
We are trying to creat Ibase for Satellite systems in solution landscape in SolMan system, using the automatic generation(TA SOLUTION_MANAGER) for specific solution.
After successfully generation we have only one iBase for one solman system only, but there are some systems in solution.
Does anyone know how to generate iBase for all systems in solution?Hi,
There will be only one iBase for a solution.
Goto tcode IB52 and check. You will find all the systems assigned to your solution appear there.
regards,
Ram -
Bom for production order and subcontracting
Dear guru ,
I have a finished material that can be use both produced in-house and procured externally with subcontracting.
Now i use one only bom with usage 1 (production ) for the two process.
I have a problem for one component.
For subcontracting i must consider this component as a phantom (with explosion of its components) , instead for the in-house production I must consider this component as a normal stock item.
Can I use only one bom or I must create an alternative bom for manage the two cases ?
Thanks for your help.Dear CRIS,
In my understanding this may create discrepancies during the material transfer from own stock to the vendor and also during
month end checking process.
What's the problem of maintaining that component as a stock item?why it should be treated as a phantom only for sub-
contracting?
Even if you are maintaining 2 different alternative BOM's for the final product one with the component as a normal assembly and
the next one as a phantom,you will be facing issues during costing purpose and material inventory also.
Come back with your further questions.
Regards
Mangalraj.S -
Cost Center does not exist for a particular period - Solution
We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this errorThe Post contains a solution
-
How to enable purchasing tab in BOM, while defining bom for a item
dear gurus,
while defining a bom for a item, there ae various tabs like main, effectivity, OM etc. among that purchasing tab is in disabled state. how to enable that.
pls provide setup and whats actual use of that.
waiting fr reply.Dear,
For a phantom assy the special procurement key in the material master should be 50. You have done the right thing.
But in the BOM of FERT please remove the phantome assy Off indicator. Once you maintained the special procurement key 50 in material master, the phantom indicator will be acutomatically set in the high level bom.
Hence if you activate the phantom assy off then this will override the phantom indicator
For more understanding please see trhe below links
http://www.sap-img.com/production/what-exactly-is-a-phantom-item-or-assembly-means.htm
Regards,
R.Brahmankar -
System Monitoring for Satellite System in Solution Manager
Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
ThankuHi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku -
How to create the BOM for co product
Dear friends,
How to create the BOM for Co product and How the production will create and how the costing will capture for that.
Regards,
Sabhapathy RDear Umesh,
How Bom created for co product
By product
Header
xxx
101
mvt
mvt
qty
item
yyy
261
1
zzz
531
0.5-
By product
Same way how we create co product for BOM. pl explain with simple example.
Thanks ®ards,
Sabhapathy R -
Adding alternate component in the same BOM for 2 level BOM setup
Hello,
I have a BOM with the following setups -
BOM_A components are BOM_B, Comp_A1, Comp_A2
BOM_B components are Comp_B1, Comp_B2
The need is to have an a BOM with components Comp_B1, Comp_B2, Comp_C1. if I create this as an Alt of BOM_B, how can I use this alternate in BOM_A?
Can anyone please let me know if there is a way to specify the alternate of BOM components in multi level BOM?
Regards,
ManjuHello Manju,
Can you please specify the exact business requirement.
Why this is required at BOM Level?
If BOM_B (comp_B1,comp_B2 & comp_C1) is Alt. bom & WIP job completed using this Alt. BOM then syste will take care / consider valuation as per Alt. BOM for first level bom (BOM_A) WIP job.
Thanks
NS -
How to create group bom for multiple plants with different company codes
Dear all,
In my current scenario we have 5 Company codes with a plant with each company. The same kind of materials exist in all the 5 plants, so what i want is when i create any BOM, that BOM has to extend in all the company codes, as with GROUP BOM i can able to extend the same in only one company code.
So how to do this?
Thanks in Advance
BhushanFor that first extend all the materials to all the plants... In one plant create a BOM for the material..
In all other polants in CS01, click COpy from .. There you mention the matreial and the plant in which the BOm is alerady available..
karthick -
Looking for SharePoint Project Management Solution for Office 365 - Risk,Issues,budget
Hi All,
I'm looking for a Project Management solution plugin like PM Central below for office 365 cloud
http://store.bamboosolutions.com/BambooMainWeb/pmc-tryit.aspx
Looking to get more resources and links
Thanks in advanceHi Patrick,
There are many project management apps for SharePoint Online. Such as Project Management, EPM Pulse for Project Online and so on.
Here is the office store URL , you can choose an appropriate app and add it into your SharePoint Online:
http://office.microsoft.com/en-us/store/results.aspx?qu=project&avg=osu150&vtags=Project%20Management
Best Regards,
Eric
Eric Tao
TechNet Community Support -
How to Generate Diffrent Subcontarcting BOM for Diff. Vendor in MRP
Hi Experts,
Ii have query @ how to generate to Diffrent Subcontracting BOM for Diffrent Vendor for same material in one plant in MRP(Material Requiremnt Planning)
Example: I have X Finished material having 3 Vendor with their Quota Arrangement with 40,30 & 30% quota. This 3 vendors have diffrent BOM,i.e. Alternative BOM. how shall i generate Diifrent PR with Diffrent Subcontracting BOM for according Vendor.
Pls tell me procedure for this.
Thanks in Advance,
Best Regards,
DevHi Dev,
You can acheive your requirement using Production Version in Material Master MRP 4 view , production versions tab.
Create three different production version as below and assign the same to the Vendor in Vendor Info record Tcode : ME11 / ME12 :
Prod Version Alt BOM For Vendor
01 01 XXXXXX
02 02 YYYYY
03 03 ZZZZZZ
Assign the Production Version to corresponding vendor in Vendor Info Record.
Goto t.code : ME11 /ME12 put the Vendor (say XXXXXX), Material No , Purchase Org and Plant and seeect the sub contract vendor radio button and press enter.
System will take you to CIR : General Data screen , Select the Purch Org Data 1 and enter the Production version "01" number in the field "Version" save and comeout.
Similarly do it for the other two vendors YYYYYY -02 and ZZZZZZ -03 .
Now if you create a sub contracting P.O system will propose the Alt BOM 1 for the Vendor XXXXXX , Alt BOM 2 for the vendor "YYYYYY" and Alt BOM 3 for the vendor "ZZZZZZ".
Hope this will help you.
regards
radhak mk -
Use of Alternate Components in BOM for Production
Hi Experts,
We implement for a customer who are manufacturers of Electronic Products.
There are possibilities of producing a Finished Products with an Alternate Child Parts some times.
Is it possible to automate this.
More examplified below.
XYZ is a Finished Product whose Components are A, B, C.
To produce the same XYZ, the components used may be
A1, B, C or
A, B, C1 or
A1, B, C1. So there are binary concept number of combinations.
Since the components are more in number & there are chain alternates (i.e. if one changes other has to be changed), it is not practically possible to maintain many number of BOMs for a single Finished Product.
Is there any way implement this scenario upfront.
Advance Thanks & Regards
AruHello Friend,
SAP does not have such type of functionality we can make one bill of material for one finished Item.
Manually:-
You may try like make big bill of material ,which have all alternative materials ,raw material in single BOM.
and whenever you make production order delete that materials which you are not going to use that production.
Import from excel file:-
If we want to make combination then goto excel and import it by Data transfer workbench(DTW)
i am working in same industry , i m using same in excel make all combination and varified it engg. then import in Bill of materials as well production order.
for import i have made .bat file AND end user put the excel file in predefined location and click on .bat file it execute and all data import in SAP with using manually DTW.
Thanks
Manvendra Singh Niranjan -
Differ Bom For Production order and Subcontracting
Dear all
Is there any process to defined BOM for Subcontracting & production Order separately and how can we make the Bom For Both case ,If it is possible then how can we choose in the production order for in house production and also for subcontracting for purchase order.
Rgds
Pankaj AgarwalHi,
After giving 'X' in the procurment type, maintain quota arrange usage as '4'.
Then use T.code meq1, for creating quotas.
Give the material no. & then give validdity date. Double click the validity date, this will take you to another screen.
Here give the procurment type as internal production, the %quota & the prod version in the 'Version field'& then in the second row choose external procurement & choose sub-contracting in the special procurement field, then enter the %quota & prod version in the 'version' field.
After this in T.code omi4 (for lot-size), check if the lot size you use has got a tick in the splitting quota. If not check this indicator & then run mrp. Based on the quota %, pl order & pur req will be created.
Regards,
Senthilkumar SD -
How to create Rfc for EP system in Solution manager
Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving " NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhirajHello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC 1
- CTS_SYSTEM_TYPE JAVA (others for a MDM system)
- NON_ABAP_SYSTEM 1
- COMMUNICATION_SYSTEM: (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY TAGGED
- WBO_REL_REQ_STRATEGY MANUAL
For quality and production Java system (target systems):
- CTC 1
- CTS_SYSTEM_TYPE JAVA (others for a MDM system)
- NON_ABAP_SYSTEM 1
- COMMUNICATION_SYSTEM: (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ
Maybe you are looking for
-
Hi there, ive been using lucence for a assignment that i am doing i was wondering if some you could have a look that this piece of code that i have been working on. The code that i am working on this below package Search; import org.apache.lucene.ana
-
XI is not able to archive file in file-idoc scenario
Hello friends, I have an issue in my file->idoc scenario. When a file is placed to XI's filesystem using FTP, it is placed under xiftpuser user. Owner of all directories in this structure wher the file is placed is xiftpuser. XI is not able to archiv
-
When Lion merged the mail accounts from Show Leopard it appears to have two emails in a gmail account that aren't actually there. It shows a 2, but no mails are present. My iphone account is fine so its some problem with the merge from gmail. I de
-
I want to increase my current subscription to Unli...
How do I do that without having 2 subscriptions being charged at once?
-
Dear All, In BPC 10.0 Microsoft Version, I am performing consolidation. Running consolidation pckg was successful initially. Suddenly, it fails - giving the following error message: Error FX-300 nothing extract from Fact - CLCFXTrans I believe the ab