Bom for component allocation in routing

I have created Sales order Bom. When I create normal routing and go for component allocation then system asks for Bom creation.
Why system is not considering sales order bom in Normal routing for component allocation?

Hi,
Sales order BOM will not be valid for Production. Eventhough you have created the sale BOM, the system will consider only the Production BOM. So you need to create a Production order BOM also, when you want to create a routing or production order creation.
Regards,
V. Suresh

Similar Messages

Problem in BOM or component allocation for the Non- codified Item in a PO.

Hi All,
Please advise how to explode a BOM or Assign component in a Purchase order with Item category (L) for a Operation oriented material for which no material code is created from a production order .
Actually in my scenario, no raw material component will send to the Sub -Contract Vendor. Only Assembled operation material lets say operation 20 from a routing ( which is not having material code ) from an In - house production from a shopfloor has to be sent to the vendor to create a operation 30 material , which is also not having a material code." How to explode a BOM or component allocation for the Non- codified Item in a PO".
Kindly give me the IMG settings for the above scenario.
regards,
YK

Hi Prasobh,
Tnx for your suggestion. But, the client external processing routing is not constant activity . Based on the Operation bottlenecks client is sending the operation as external Processing. For Eg., If on first order operation 20 be external , Then in second order operation 20 need not be external. operation 30 may go out for external processing. Client does not want a material code for each operation.
Give your valuable suggestion.
regards,
YK

Function module/BDC/BAPI for Component allocation operation wise

Dear Experts,
I need your help on Component allocation in Routing (CA02) per opertion wise.
Currently we are assigning the Component individually per operation manually
The problem is if a BOM is having 500 Components/Materials and there are 10 operations then we need to assign these 500 components to that particular operation manually which is tedious job & killing a lot of time.
I need your help if any Function module or BAPI or BDC is there to allocate these components per operation wise.
Or any other process which can done easily on this component allocation operation wise
rgds
gsc

Hello GSC, (and of course anyone able to help me)
taking account of the date of the message (2008) i think you have finally encountered a solution to your issue ?
Well, now i have got the same problem than you before.
My requirement is to modify the component allocation in a routing by using change document.
I found the bapi /SAPMP/BAPI_ROUTING_PROCESS. I have spend few days to make it work without success.
Iam still facing error message. Futhermore i have read trough a SAP note that this BAPI could not work properly in some case.
Considering that Iam trying to study other solutions (BDC ?).
Please, i would appreciate if you give me some advice on this problem.
Thank you very much.
Best regards,
C.S

Component allocation in routing

In CA02 (Sales order routing) when I go to component allocation more than once then i get following message. It is ok that you only go once in component overview??
Component overview for routing cannot be called up
Message no. CM022
Diagnosis
You want to call up the component overview for the selected routing (group 50000637, counter ). However this is not possible, because earlier you clled up a material component overview for another routing that had the following properties:
It belongs to the same group as the routing you have now selected.
It has been allocated another material or material BOM as the routing you have now selected.
Procedure
As long as you do not call up the component overvierw for the selected routing, you can go on working as usual. To call up the material component overview, proceed as follows:
1. If you have made any changes in the selected plan that you want to save, do so.
2. Cancel editing the routing
3. Start editing routings with the selected routing (group 50000637, counter ) and call up the material component overview

all u have to do is, go to ca02 operation overview. highlight the operation and click on component allocation. there u can see assignment tab. click on that and assign the components from the bom of that header material. it is as simple as this. dont forget to save the routing at the end.
pls try this and come back with more clarity.
cheers
vinay

Component Allocation in Routing is missing

Dear PP Gurus,
We are using R/3 4.7 version and we are facing a serious problem in Routing Comp. Alloc. since few years. There are 3 to 5 operations in the Routing and about 20 to 30 BOM components, each components are assigned to their respective operations. But after a few days, component allocations for some materials would be gone. So the user needs to do the assignment again from time to time.
They don't even changed the BOM and there's only 1 person who is maintaining the Routing. So we don't assume that somebody has removed the component allocation. Besides, we have activated the Change Management in Routing since then, and we are able to see the history changes in the Routing.
If this is a System Bug, do you know any patches or OSS note that could fix the problem?
Thanks,
John

Dear John,
I don't think that is a system bug.
I believe that is your master data.
You could start to researh from material master - simply use MM04
I also recommend to check out the relevant BOM changes. Look after routing changes as well.
Before to do that, go to SU01 and get all users who able to do such things.
(some users could break the process just done a 'little' adjustment)
Good luck!
p.s. just in case - have you done any updates recently? ask you basis guys

Level & path determination for Component allocation in BAPI_ROUTING_CREATE

Hi,
I am facing a problem in determining the level and path which needs to be fed in the BAPI structure of Component allocation in BAPI_ROUTING_CREATE for phantom assemblies and its components.
ls_compall TYPE bapi1012_com_c.
ls_compall-order_lvl       = ls_bomexp-stufe.
ls_compall-order_path      = ls_bomexp-wegxx.
Is there any FM or any logic to find out the same.
Thanks,
Vasudha L

Hi,
I am facing a problem in determining the level and path which needs to be fed in the BAPI structure of Component allocation in BAPI_ROUTING_CREATE for phantom assemblies and its components.
ls_compall TYPE bapi1012_com_c.
ls_compall-order_lvl       = ls_bomexp-stufe.
ls_compall-order_path      = ls_bomexp-wegxx.
Is there any FM or any logic to find out the same.
Thanks,
Vasudha L

BAPI for Component allocation-Routing of materail

Dear all,
Could you please let me know the BAPI which can be used to create the routing i.e. all parts available in BOM should be made available in some cell i.e to allocate the component at all level.
Regards,
Nithiyanandam

Hi All,
Any inputs plz...
Regards,
Nithiyanandam

Selection criteria from table PLMZ for component allocation

Hello All,
I need to produce a report for the componenet allocation, my issue is after knowing that i hve to fetch data from plmz, i m stuck,
reason is when i select entries from plmz with criteria plnnr and plnty it gives me more entries then those found when i do a ca03, can anyone please guide, wat i m looking for is exact number of entries and then the material and bom info, please point me to the right direction,
thnaks,
Hitesh

Hi Hitesh,
As Mr.Prasobh u have to join MAPL-PLMZ-PLPO tabls with matarial, Plant combination where LOEKZ is not equal X
For BOM ITEM , Name u have to add to More table STPO, MAKT. The flow is as follows,
1.First u can start with MAPL.
input Field: MATNR - your Header Material
                 WERKS - your BOM plant
Outfield for Next Table. PLNTY,PLNNR,PLNAL,LOEKZ (Not equal X).
2. TABLE: PLMZ
    Input Field: PLNTY,PLNNR,PLNAL,LOEKZ,WERKS ( from previous tables)
    output Field : STLTY,STLNR,STLKN, PLNFL.
3. Table: PLPO
     Input Field: PLNTY,PLNNR,PLNAL,LOEKZ,WERKS.
   output field :VORNR,MEINH,BMSCH,
4.Table: STPO
    Input Field:STLTY,STLNR,STLKN (From table PLMZ )
    output field: IDNRK,POSNR,POSTP.
5.Table MAKT.
    Input Field: IDNRK
     output field : MAKTX.
what i have given is a flow to fetch the data. Try it with abab`rs to develop report.
i hope the above tables give most of fields which you need   in ca03 (com all view).
plz reward point all of them if u found usefull.
regards
r.pradeep

BAPI For CA02 - Assign Component allocation for routing

Hello Gurus,
I m searching for the bapi for the component allocation in routing.
Since routing is already created my work is to assign component allocation to the operation.
i tried with the BAPI_ROUTING_CREATE and /SAPMP/BAPI_ROUTING_PROCESS
BAPI_ROUTING_CREATE can be used only to create new routing.
But the /SAPMP/BAPI_ROUTING_PROCESS is going to short dump.
So any alternate please suggest.
Please provide sample code to assign component allocation.

Please have a look at following thread:
http://scn.sap.com/thread/2084329
Also,check tcode :CWBQM
Regards

Component allocation of material components in routing

Dear Sap Gurus,
I am having a finished product in which it contains rawmaterials for making but it in my routing i am having operations of 10, 20,30,40,50,60 ( 10-shearing, 20-bending, 30-welding, 40-grinding, 50-bending, 60-grinding )
but in my routing doing compoent allocation i am using materials from bom which contains components of 10,20,30 for routing operation of 10 and the output of 10 is the input of 20 routing operation so how can i give component allocation in routing whether i should give for routing operation of 10 the bom components so that it can take for routing operation of 20,30,40,50.
whether my procedure is correct or any body can help me how to proceed the above problem.
regards,
muralidhar.t

Murlidhar,
First of all tell me one thing, are you going to identify the inprocess material with a separate material or not?
If you are going to do it, then your query can be answered.
If component ABC is allocated to operation no. 0010, it gets changed to PQR, then you need to first create the code for PQR. Then do GR as a byproduct with movement type 531 & again do the GI with movement type 261 against that order itself.
It's a quite tedious process & normally no one goes for this.
It's better you deal to the initial component & the final product only. If you opt out for in process material codification then in future where there are several stages of the process, you find it difficult & next to impossible.
Go for that if it is having major impact on the process (normally it never be).
Hope this helps you.
SmanS
Edited by: SAP PP Consultant on Mar 30, 2009 12:59 PM

Routing-LSMW-Component Allocation to task list

Hi Gurus,
I'm creating LSMW to Routing using Standard-Batch Input method, have mapped the required structures.
But I was unable to map the Component allocation to task list.
Is it possible in the standard one else I need to go for some sort customisation.
Can anybody throw some lite on this issue ?
regards
Ram Kumar

Hi,
You will find BIPMZ Batch input structure for component allocation to task list in the standard structure relations (no customizing required). Use the same for your need.
Hope it clarifies your query.
Regards,
Vivek

Component allocation of phantom assembly

I have a phantom assembly "X" with its components as A, B, C, D. During component allocation in routing do I need to allocate Phantom Assembly "X" to an operation as well.
Please specify the reason for YES and NO?

Hi
Check the following:
Material components in a BOM that are not assigned to an operation in the routing are automatically assigned to the first operation when you create a production order.
If you have assigned a phantom assembly to an operation in a routing, the system automatically assigns all of the material components in the phantom assembly to the same operation as the phantom assembly when you create a production order.
If you have assigned individual material components from the phantom assembly to various operations without also allocating the phantom assembly, the system assigns the material components that have not been assigned and the phantom assembly to the beginning of the first operation when you create a production order.
Thanks

Component allocation in planned order and production order

Hi all,
I want table or Function module for component allocation in production order and planned order.If component changes done in
planned order or production order.
In Table PLMZ and STPO I am getting component which are allocated in routing MASTER DATA.But if after generation of
production order or planned order and I had changed one component in production order then it will not show in PLMZ and STPO
table.
Please reply.
Regards,
Vidyasagar

Dear
Please check the following table :
AFKO         Order Header
AFPO          Order Item Detail -Compoenets
AFVC          Order Operations Detail
AUFG         Allocation Table Sub-Item, Store Group
AUFI           Allocation Table, Document Sub-item, Store
AUFK          Order master data
RESB
FM: CO_BC_INSERT_CMP_OF_ORDERS . BAPI : BAPI_PRODORDCONF_GETDETAIL.
Refer : Change components and Routing of production order
Edited by: Jiaul Haque on Dec 13, 2010 7:54 PM

Component Allocation Mass Change

Is it possible to mass change, say the backflush indicator, in CEWB for component allocations? If not, any other suggestions?
Regards,
Luiz

Ashok,
Since this deals with routing for configurable material with average of 1500 to 1700 component allocations, I thought CEWB would be the tool to use. But I find no mass change capabilities in the Component Allocation view. Do not know of any other mass change transactions for routings dealing with component allocation.
Regards,
Luiz

Component allocation to Euipment Task list

Hello frinds,
I have a query related to Plant Maintenence.
We have a euipment task list with different counters . In each counter we have operations and components assigned to those operations.
When order is created some of the operations are not getting copied and hence few components as well.
Please tell me tables where i can find the allocation of compoenents to operations.
Thanks
Rohit

Thanks Mahee,
The table i was looking for is PLMZ (allocation of components to operations)
I found that deletion indicator is set for certain operations in PLMZ and those components are not picked which are assigned to operations with deleltion indicator (LOKEZ-PLMZ).
Can any one tell me how this deletion indicator is set for component allocation to operations and how do i remove this ?
Thanks for help.
Rohit

Bom for component allocation in routing

Similar Messages

Maybe you are looking for