BOM Header and BOM Item Enhancements
Hi all,
I just want to make sure I got this correct so far and looking for further info. I have some z-fields(custom fields) that I'm adding to CI_STKO (BOM Header) and CI_STPO (BOM ITEM). I need to be able to display these fields in transactions CS02,CS03,CS11,CS12,CS13. I think I'm suppose to use the following enhancements:
PCSD0003 : BOMs: Customer fields in header
PCSD0002 : BOMs: Customer fields in item
Can anyone give me some info on the screen exits in these enhancements if this is correct and if not can someone give me some guidence to displaying the z-fields in these transaction?
Message was edited by:
Akeem Lockett
You will have to make all the modifications inside the function group XCSA.
You wiill get the necessary exits there.
For displaying the custom fields you can use the screens 701 to 721. These are subscreens for displaying the item details. The moment you make changes here in these screens , you will be able to see the effect in CS01/02/03.
Hope it helps.
Similar Messages
-
Dms link to bom header and bom item
hi, all
I read the solutions who r given to me, also i worked according to them. in dms i m not finding attched documents,which r attached at bom header ' CS01/CS02'.
also i treid to change doc's in dms for bom item, the sys message say's 'this transaction is not support for this activity.
rgd
benhi benaka,
Go to dms,
Dc10, do the object linking for material/ BOM.
whatever document you have selected for object linking attach the file to it.
go to cs01n, give your material name, enter.
once you, inside the bom, select document tab, enter your document type and number and save it.
this way that document is link to that bom. and whatever the file is there inside document, you casn see it. just click it.
thanks,
regards,
nitin
award point if useful -
Valid to date for BOM Header and Item
Hello everyone,
I have been searching for "valid-to" date for BOM header and Items since several days but no luck ..
I know we can see it using transactions cs11/cs03 etc. But i wish to know the table where they are stored. As I need to extract them to BW.
Any help will be highly appreciated.
Thanks in advance!
Regards,
AnujHi Anuj
In table STPO,the field AEDAT gets updated only when a change number is used,otherwise the valid to date will be shown nil here.
And also ref the link
Problem finding Valid To Date or Change number to on BOM
pavan -
Cad indicator in BOM header or bom item
Hi All
Cad indicator in bom header or bom item is set only using the CAD interface.The system sets this indicator if the bom header or item is generated in a CAD system and transferred to the SAP System via an interface.
If we upload bom with our upload program then this indicator cannot be set.
Is there is any way by which we can set it for all boms which are uploaded through upload program ?Hi,
Why would you want to do that? Wouldn't it be incorrect representation?
Regards,
Vivek -
Delivery document how to print the BOM Parent and Child items
Hi,
I have a production BOM. In Delivery document how to print the Parent and Child items Item Code and Qty.At the time
of add a delivery document Inventory stock redused only in Parent Item not child item because child item stock already reduced in issue for production.If you need to print both the BOM Parent and Child items, you have to create your own report. BOM is only for production if it is not Sales type.
Thanks,
Gordon -
BOM Header and Components Relationship table
Hi There,
Can you please let me know the table which specifies the relationship between BOM Header and Its components in Product Master?
Any Help is appreciated.
Regards,
Chanakya ReddyThanks everyone,
Solved it myself.
Regards,
Chanakya Reddy -
Header and Footer Items in Adobe Muse? Also Menu text being cut off half way.
How can I make the header and footer items load faster in Adobe Muse? I am hosting with Business Catalyst. Everything else loads almost immediatly on my web page, but my Header and Footer graphic- wood grain picture- take almost 10 seconds to load, and almost a minute to load on mobile devices.
As well, my menu's are not loading correctly on other peoples devices. On my lap top everything looks fine, but on other peoples devices the text in my menus is only loading half way? -only shows half the text.
Still working on my site, but to see what I am talking about you can visit the web page I am in the middle of building at www.bkskin.com
Please give me some advice if any of you have some, thank you.
Megan BurnettHello,
It seems to be an issue with the Font that you have used.
You have used Bubble-one font and if you check this font in Google Chrome it is cut off and if you check in Firefox, it comes up fine.
Please have a look at this link in Google Chrome and Firefox and you will see the difference : http://www.google.com/fonts/specimen/Bubbler+One
I would suggest you to use some other font in order to fix it.
Regards,
Sachin -
Header and Line Item reporting (MultiProvider)
Hello All,
We have data coming in from a LO Extractor. There are 2 extractors. 1 for line item the other for Header. The line item extractor has all the fields for both so we decided to use this extractor (the line item).
Question is, when extracting this data multiple records come over. Let's say the order has 2 line items. It brings over a header record and then 2 line item records. We have it going to an ODS and then Cube. The ODS key is order number and item. Well the header record comes over with item number #, so 3 records hit the ODS.
How do you handle this? We saw something about denormalization and make this header record item number a 0.
Can someone explain to us how to handle this? We also read about a Constant selection and loading the header record and line item as we are to both the InfoCube, but we just don't understand this solution.
Please help, Thank youItem level will have all fields those are in Header level.Header level data will be a subset of Item level data.Load only Item level and when you require header data remove Item number in that relevant DSO and you can see all the data summarized to header level in overwrite mode.
This will not be good option if you require some fields that may have different records in the header and the item.
One better option is create a secondary staging DSO that updated by header, item and schedule line level and you can choose your own data fields and key fields. You can update them in overwrite mode to have summarized records that avoids duplication of records from header and item for same document.
Constant selection wil be helpful in the report level not during load process.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e7/5f983c1a356858e10000000a114084/frameset.htm
This will ensure total displayed is constant even after navigation. So it hides repetitive records displaying after drilldown. -
Displaying header and line items
Hi,
i) i have a fieldname i.e text and its value to display in the bodypage (body)..
i want to display the text and its value only if the value is there.. otherwise it should not be displayed and a blank line also should not appear
in smartforms we can handle that in conditions in the corresponding node, how we do the same in adobe forms?
ii) suppose i have header and line items and for each header item i want to display the line items, both r in 2 tables how can we handle this
ThanksHi Shekar,
The following solutions useful if you are using printbased forms.
1. To display the field if the value is there.
->In the Context you can define the condtion on the filed.
->You can write a script on the subform superior to the field
[code] if ( $.field.rawValue == <value> ) then
$.field.presence = hidden
endif [/code]
2. Header and item table
In the SFP context drag the header table from interface.drag the item table from interface on the DATA in the header table. it will placed at the end of the header table. Now select the item table select where clause in the properties ( at the bottom of the screen ).there you create a line for condition using create button. drag the field from header table field ( say header-matnr ) on the right side and then drag the same field from the item table ( say item-matnr) in the left side.This will filter the item records relevent for header record.
refer the message
Re: Adobe IF Attachments -
Need information about FI document with header and no items
Hello Experts!
I need your help for understanding the following subject :
How is it possible when using F.13 to obtain a fi document with header without items sometimes,
and fi document with header and items anothers times?
We didn't saw/found customizing topics about that ( to enable or not header without items) Some exists?
The only difference in the two cases are the document's type involded which are not the same.
Regards,
JosianeHi,
We verify and compare everything. it's the same everywhere except the document type of the invoice
first case, F.13 create conciliation fi document with header and no items
invoice ( doc. type YB )
payment ( doc type ZT)
conciliation ( doc type XZ )
2th case, F.13 create conciliation fi document with header and none items
invoice ( doc. type YT )
payment ( doc type ZT )
conciliation ( doc type XZ )
We match / compare every fields and value between invoice of 1st and 2tch case, every fields and value between payment of 1st and 2th case.
( we create tests case in own integration system for reproduce )
We alse match / compare customizing of invoice type document YB and YT and they seems identical...
The procedure is the same with F.13 to do conciliation in both cases.
we got same amount, same currency etc etc.
We still didn't understand why with invoice type YT the conciliation document created is not the same as invoice type YB ...
Nobody have idea ? -
Custom fields added on PO header and PO item in ME21n
hi everybody
I have added 2 fields on PO header and PO item level in ME21N screen, everything is working fine
but the issue is that if the Customer Data tab page is not opened at the Header Level, the additional fields in Customer Data tab page at Item Level are not displayed as well
Does anybody knws why this happens?May be i wrongly explained, all the data are getting populated on the screen and in the database tables.
Its just that if the Customer tab on PO header is not opened, the fields in the Customer tab in PO item level are not getting displayed
As such, the data are being saved in the tables.
Its only if the customer tab on header is not opened, the fields in Customer tab in PO item are not displayed.
Otherwise if PO header customer tab is opened, everything is ok -
How to upload header and corresponding item details to application server?
Hi all,
How to upload control data , header data and the corresponding data in the application server based on the company code.
If the user selects multiple company codes like US, GE,IN....3 files need to placed in the application server with the corresponding header and item details. The control data is unique per file.
Thanks,
CharanFor Header and Item data you create separate structure as below...
Header
|----Link
|----
|----
!-----Item
|-----link
|-------
(Note the hierarchy- Header str>LINK--> Its fields->ITEM str > LINK under ITEM str->ITEM's fields under ITEM's fields.)
Header part will have all header fields. Item will come under Header and all ITEM's fields will come under Item.
Both HEADER and ITEM will have field LINK -- Char 003 which will allow all ITEMs for a HEADER to fall under proper Header data..
Header and Item Structure will have different files as per the sequence of the fileds..
Map the fields properly..
It will work...
If its helpful to you don't forget to reward the pts..
Edited by: sumesh on May 19, 2008 4:28 PM -
Dear all,
I have a input that looks like this:
HeaderKeySomeHeaderInformationItemKeySomeItemInformationItemKeySomeItemInformation...
Here's the actual input
TEHGMESS0026000000288S0001TEI2____026200006112410400000000 18010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000JTEI2____026200006112410400000000 19010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
HeaderKey = TEHGMESS
ItemKey = TEI2____
Is it possible to process this via MessageTransformBean (my actual scenario is JMS to IDoc)? I already tried but I only succeeded when having new lines in my input to separate between Header and (multiple) Items.
So when the input and my configuration looks like below it works, but when I only have a single row input it doesn't work, even when specifying xml.recordHeader.endSeparator = '0' / xml.recordItem.endSeparator = '0'. I even tried xml.endSeparator = '0' but no luck.
Input that works
TEHGMESS0026000000288S0001
TEI2____026200006112410400000000 18010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
TEI2____026200006112410400000000 19010000000000 00126000000000126000120600000000002000000000 000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
Matching configuration that works for input which structures are delimited by new line.
Paramentername
Parametervalue
Transform.Class
com.sap.aii.messaging.adapter.Conversion
Transform.ContentType
text/xml;charset=utf-8
xml.conversionType
StructPlain2XML
xml.documentName
MT_TEI2Split
xml.documentNamespace
http://hansgrohe.com/pi/MQ/TEI2/10
xml.keyFieldName
SATZARTKey
xml.keyFieldType
CaseSensitiveString
xml.processFieldNames
fromConfiguration
xml.recordHeader.fieldFixedLengths
8,4,9,1,4
xml.recordHeader.fieldNames
SATZARTKey,SATZLENHG,NUTZLEN,MESSAE,MESSNR
xml.recordHeader.keyFieldValue
TEHGMESS
xml.recordItem.fieldFixedLengths
8,4,2,10,8,19,3,3,2,10,6,2,10,6,2,10,6,6,6,6,6,11,9,2,10,6,2,10,6,3,4,3,7,14,8,1,31
xml.recordItem.fieldNames
SATZARTKey,SATZLEN,BUCHART,TRNR,ANDGNR,MITEM,TEIVARI,BSTSTATU,REFTYP,ORNO,POS,REFTYP1,ORNO1,POS1,CHATYP,CHARGE,CHAPOS,ABBVONL,ABBNACH,ZUBVONL,ZUBNACH,I2MENG,I2BUNR,REFTYPN,ORNON,POSN,REFTYP1N,ORNO1N,POS1N,BSTSTATN,ABUSERAB,ABUSERFN,ABUSERNA,I2TIME,I2LIDNR,I2FMCODE,FILLER
xml.recordItem.keyFieldValue
TEI2____
xml.recordsetName
records
xml.recordsetStructure
recordHeader,1,recordItem,*
Any clues on this? Is it even possible to have multiple structures in one row? Many thanks in advance
JensSAP came back to me with this answer:
First, I would like to point the documentation for Message Transform
Bean (MTB) in 7.4:
http://help.sap.com/saphelp_nw74/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm?frameset=/en/57/0b2c4142aef623e10000000a155106/frameset.htm¤t_toc=/en/45/0ea2de423c2d6be10000000a11466f/plain.htm&node_id=18
As it is written at the beginning of this document, MTB is used to
call classes written for the Plain Adapter Engine. So you may find
additional documentation about the parameters for convertion in the
documentation of the Plain Adapter Engine
(http://help.sap.com/saphelp_nw74/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm?frameset=/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm¤t_toc=/en/75/246b3de666930fe10000000a114084/plain.htm&node_id=11).There it is written that the structures by default are
arranged line-by-line. The endSeparator just adds additional character
string as a separator after the last column in a row.
I hope that this answers your question. MTB expects the data to be
structured line by line.
You may add a custom module, which transforms the message in the
expected format.
If you have a look at the second link there's even a more precise wording that multiple structures within one line are not supported:
xml.NameA.endSeparator
Even if no specification is made here, a line break must follow since substructures are always expected as a line of the document.
Bottom line is that it's not supported by now and verfied by me with PI 7.4 SP5
Many thanks to Ambrish, Amit and Hareesh for the valuable input. Will probably try to work things out for now following Ambrish's / Hareesh's suggestion as this seems easier to implement. Amit's proposal with a dedicated module however would probably be the more polished solution.
Cheers
Jens -
ALV for one header and multiple item table
Hello All,
I have a requirement to display records from one header and three item table using ALV.
The output should be such that
1-line - record from header table
followed by - records from the 1st item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
followed by - records from 2nd item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
followed by - record from 3rd item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
Can you help me out.
Thanks and regards,
Subramanian.hi
data population is same for alv or normal reporting.
First you select the data from header
select from item data using for all entries in it_header where....
select item 2
selct item 3
loop a it_header
read item1
read item2
read item3
check sy-subrc
move to i_final
then build fieldcatalog and display..
look the example
SELECT PERNR
STELL
WERKS
ABKRS
ENAME
ENDDA
BEGDA
ORGEH
PERSG
PERSK
KOSTL
FROM PA0001
INTO TABLE I_PA0001
WHERE PERNR IN S_PERNR
AND ABKRS IN S_ABKRS
AND PERSG IN S_PERSG.
SELECT SPRSL
STELL
ENDDA
STLTX
FROM T513S
INTO TABLE I_T513S
FOR ALL ENTRIES IN I_PA0001
WHERE STELL = I_PA0001-STELL AND SPRSL = 'EN'.
SELECT PERSA
NAME1
FROM T500P
INTO TABLE I_T500P
FOR ALL ENTRIES IN I_PA0001
WHERE PERSA EQ I_PA0001-WERKS.
LOOP AT I_PA0001 .
READ TABLE I_T513S INTO WA_T513S WITH KEY STELL = WA_PA0001-STELL
SPRSL = 'EN'
ENDDA = WA_PA0001-ENDDA.
IF SY-SUBRC IS INITIAL.
MOVE WA_T513S-STLTX TO WA_FINAL-STLTX.
ENDIF.
V_SNO = V_SNO + 1.
Read Value For Personal area Text.
READ TABLE I_T500P INTO WA_T500P WITH KEY
PERSA = WA_PA0001-WERKS.
IF SY-SUBRC EQ 0.
MOVE WA_T500P-NAME1 TO WA_FINAL-NAME1.
ENDIF.
FORM DISPLAY_DATA .
--BUILDING FIELD CATALOG--
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = V_REPID
I_INTERNAL_TABNAME = 'I_FINAL'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = V_REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = I_FCAT[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*--Modifying titles of Field Catalog--
READ TABLE I_FCAT INTO WA_FCAT WITH KEY FIELDNAME = 'S_NO'.
IF SY-SUBRC EQ 0.
WA_FCAT-REPTEXT_DDIC = 'X'.
WA_FCAT-SELTEXT_S = TEXT-041.
WA_FCAT-SELTEXT_M = TEXT-041.
WA_FCAT-SELTEXT_L = TEXT-041.
WA_FCAT-OUTPUTLEN = 3.
WA_FCAT-JUST = 'L'.
MODIFY I_FCAT FROM WA_FCAT INDEX SY-TABIX.
CLEAR WA_FCAT.
ENDIF.
do for all the fields u want to display..
Award points if useful. -
What's the difference of Item Class value:Header and Line Item in AME Rule
Hi All,
when creating a Rule or Attribute,there is a Item Class property,which contains Header and Line Item two values.
Can anybody pls help me clarify the difference?
thx,
edmund.This information can be found in the Approvals Management implementation guide in metalink. The part number for this document is B31622-02
Regards
Maybe you are looking for
-
Boot Camp - Which Windows XP? Partition size?
A long fan of Mac's, I'm now going to use a new iMac primarily as a Windows computer using Boot Camp for my office which uses Windows-only software. 1. Which versions of Windows XP Pro are compatible? Windows XP Professional x64 Edition? Microsoft Wi
-
InstallCCRSQL can only be run in a database ORACLE_HOME, SQL*Plus not found
Hi I tired using the in-built OCM feature available in WLS 10.3.3 (C:\Fusion11g\utils\ccr) I ran the bin\setupCCR.exe and gave the relevant details like CSI, country code and email id It was successful saying "Oracle Configuration Manager successfull
-
IPod shows white screen (issue?)
My 8GB Ipod touch 4th gen has locked up. Shows me a solid white screen and will not show anything. Is there a way to reset it? I tried to hold the main home button and the button on top and no luck HELP PLEASE>.....
-
Feature Request: Web Clips Home Page
I would love it if it were possible to create a Safari homepage out of several web clips. Rather than just putting web clips on the dashboard we should be able to create (possibly multiple) home pages built from clips. (cf. igoogle)
-
Getting the voice generator to work with my m-audio keyboard
when i try to change to the voice generator, it says "missing: mixed choir". does anyone know where i can find this mixed choir and where to install it to once i get it?