BOM HEADER

Hi,
BOM HEADER field is available in which table and what is the field name of that field.

Hi,
Please check table STKO for BOM Header.
Regards,
Ferry Lianto

Similar Messages

Delivery Copy Control to sto BOM Header

hi friends
we have requirement to stop copying BOM header if there is any component is not copied from sales order to Delivery.
we are trying to use the copied routine from existed standine routine FV50B101.
please any one can give me the solution in this program where i can find the how many for compnents copied fo each BOM. if i know the location where are they copying compnenets then i can handle it.
please give me solution.
Thanks
Ramesh

remark: for me the check is in line 113 (SAPKH60407).
Please read OSS note 842829:
2. The system does not transfer the partner data from the STO to the replenishment delivery. This particularly applies to the forwarding agent. The replenishment delivery uses only the customer of the receiving plant (EKPO-WERKS) as a partner. In the replenishment delivery, this customer (EKPV-KUNNR) is the direct goods recipient. The customer is not the sold-to party or a general debtor, for whom the system would determine a (different) goods recipient using the customer master in the replenishment delivery. If the PO header contains a vendor, you can use a modification to transfer the vendor as a partner to the replenishment delivery, if required. However, this is not the standard system behavior. There is no known modification for transferring the forwarding agent.

URGENT HELP *** Need to load BOM Header TEXT

Hello Experts,
How can i load BOM Header text using LSMW
Thanks
S

Two ways to upload:
1. Via FM: SAVE_TEXT
2. Create a recording to add text for BOM Header and Use accordingly.
Regards
Eswar

SQVI for BOM header and component -reg

Hi ,
Requirement is we need to download BOM header wise Components for the BOM headers across the plants
As it is of mass and for around 7000 BOM headers we need the details , i have created a SQVI query using MAST , STKO and STPO
but when i execute it in masss inputting the BOM headers results are not correct with errors like repetitions , not matching with CS03 etc...
is there any other effective way for this requirement ?
i need to input the BOM header material and where and all plants they have BOM i need to get the corresponding BOM components
pl suggest soon as it is relevant for year end
Madhu Kiran

Hi ,
Tried with the combination of MAST--STKO-STAS----STPO , still having issues
SQVI results shows combination of soem BOM headers and components which are not yet all linked through BOM , wehn i cross check the result through CS03 , for the BOM header , plant there is no BOM still SQVI shows the records again with repititions
dont know which is missing as earlier i used to feel this SQVI is effective but i think if we use more number of tables we get issues ..
i can not ask for ABAP report development as this is one time activity required for year end things
if some one can share any doc on this please share, as i tried and tired with all combinations
can not use the function module as i need to input materials in mass
pl guide
Madhu kiran

BOM Header Long Text

Dear experts,
Is there a way to transfer BOM header long text to production order? I see bom item long texts on production order in item details. But in production order i can not find BOM header long text anywhere.
Best regards

Dear,
1. Use function module: CO_TX_TEXT_CATALOG_IMPORT
Function group: COTX
Short text: Import of the order texts from the memory section of SAPScript
You must maintain the following parameter:
Exception: NO_CATALOG
2. Create function module: CO_TX_TEXT_CATALOG_EXPORT
Function group: COTX
Short text: Export of order texts back to the SAPScript Memory
No parameters required
Please try and come back.
Regards,
R.Brahmankar

Condition type EDI1 is not populating in XKOMV for BOM Header Item

Hi All,
We have assgined EDI1 and EDI2 condition types in pricing procedure, and creating orderd through Idoc, and checking for customer expected price.
EDI1 and EDI2 are correctly populating for standard items, but NOT for BOM header item.
I checked in XKOMV and observed that EDI1 is not coming for BOM header item.
Please advise what to do.
Regards

Hi,
In case your pricing procedure is similar to standard SAP then probably you use calculation routine 8 for EDI1 and EDI2.
8 is represented by routine FV64A008. Inside this routine there is the following check:
check: komp-prsfd = 'X'.
Verify if your BOM header item category has switched on Pricing indicator (TVAP-PRSFD). If you have blank value there then this is the reason why EDI1 / EDI2 condition don't receive value in your case.
Best regards
Witek Prawecki

Change of Plant in Sales document for BOM header Material

Experts,
I want to change the plant for the BOM header Material in Sales document.
Now the field is getting grayed out.
Please let me know how can we do this.

Try using either of following TCode, (provided your Sales doc don't have any succeeding sales doc to it and material should have been assign to the desired BoM) :
CS62
CS20
CS08
Thanks & Regards
JP

Tables for BOM Header and Components

Dear Friends,
Please let me know which tables provide a link between the header Material and corresponding Component Materials of a BOM?
I have seen STKO and STPO but couldn't find such a link in them. STPO gives the component material but I couldn't get any link to Header material.
Regards,
Alok.

Hello Alok,
Table for BOM header - STKO
Table for BOM item - STPO
Table for material to BOM link - MAST
Check if MARC table has a material in it and the same material is available in MAST also, it means that BOM has been created for that material..
If Material is available in MARC and not available in MAST, it means BOM has not been created for that material.
Reward Points, if useful.
Regards,
Nitin.

BOM Header and BOM Item Enhancements

Hi all,
I just want to make sure I got this correct so far and looking for further info. I have some z-fields(custom fields) that I'm adding to CI_STKO (BOM Header) and CI_STPO (BOM ITEM). I need to be able to display these fields in transactions CS02,CS03,CS11,CS12,CS13. I think I'm suppose to use the following enhancements:
PCSD0003 : BOMs: Customer fields in header
PCSD0002 : BOMs: Customer fields in item
Can anyone give me some info on the screen exits in these enhancements if this is correct and if not can someone give me some guidence to displaying the z-fields in these transaction?
Message was edited by:
Akeem Lockett

You will have to make all the modifications inside the function group XCSA.
You wiill get the necessary exits there.
For displaying the custom fields you can use the screens 701 to 721. These are subscreens for displaying the item details. The moment you make changes here in these screens , you will be able to see the effect in CS01/02/03.
Hope it helps.

Deault BOM header status

We have one client with 3 different plants in it.
In customizing a default bom status was defined (fully released) which currently applies for all plants.
this now raises a problem in one of the plants due to different products. So this plant requires that the default status should be "not released".
My question;
Is it possible to define the default bom status "plant dependent" ? i.e. to have a different default start status for bom for different plants in the same client?
2nd question: Is there a way to mass-change the bom status for a material-bom with the entire sub-hirarchy? CS20 transaction somehow does not seem to work (or I don't find the appropriate settings).
Thanks a lot in advance.

Hi,
For part - 1 of your query check with your developer on the BADi - BOM_UPDATE, which of the method best suits your need. the parameter would be: DELTA_STKOB-STLST (i.e. BOM Status). Here you can change the value depending on your need.
For part - 2 of your query, you can work with CEWB. For the current working area specify SAP_BOM. Specify the material, plant & usage details. Then press CTRL + F8 or follow menu path Bills of material -> BOM header. Click on pencil, select the column, then the rows, then follow menu path: Extras - Mass change.
If you're new to CEWB, would suggest to test in sandbox first.
Regards,
Vivek

BADI CEWB_BOM_CUS_FIELDS EWB: Customer Fields with BOM Header (Screen E

Can someone post details (or better..an example) on how this BADI can be invoked?
I have used exits PCSD0003 and PCSD0002, but this BADI and it's partner for the BOM Item may be a better approach. I don't have a great deal of BADI implementation experience, but can learn fast. I create my own Implemenmtation and added code to the TAB Description method (below), activated it and went to CS01 to see if the new TAB had shown up... it did not. I thnk I'm missing the call to the method somewhere, but I can't locate where this might be..????
method IF_EX_CEWB_BOM_CUS_FIELDS~BOM_CUS_TAB_DESCRIPTION.
e_tab_description = 'MY BOM Header Data'.
endmethod.

Hi!
Would be greatful to you if you could let me know the answer for your question as iam even looking out for the one,
Best Regards,
Parwez.

How to get BOM component dependant demand whitout having BOM header in APO?

Hello,
I would like to know if it is possible to get BOM component dependant demand in APO without having BOM header in APO.
If someone already did that, please thanks to share your experience.
Thanks a lot and best regards.
M.Niang

Hi Niang,
There is an functionality in APO - DP module called "Forecasting with Bills of Material". You need create DP-BOM (PDS/PPM) from R/3.
Please refer the SAP help link for details.
http://help.sap.com/saphelp_scm50/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
Hope this is what you are looking for.
Regards,
Nawanit

Changing BOM Header via CSAP_MAT_BOM_MAINTAIN

Hello all,
In the documentation of FM CSAP_MAT_BOM_MAINTAIN it states under the restrictions section that "To date, changes to the BOM header are not yet supported."
I also know that sometimes the documentation is not always up to date. Is this restriction still valid when using ECC 5.0?
If the answer to my question is yes, then how can I make a change to the BOM header? (I want to change the base quantity)
Thanks,
Larry

You cannot change the header data. You have to delete and re-create the BOM with changes.

Dms link to bom header and bom item

hi, all
I read the solutions who r given to me, also i worked according to them. in dms i m not finding attched documents,which r attached at bom header ' CS01/CS02'.
also i treid to change doc's in dms for bom item, the sys message say's 'this transaction is not support for this activity.
rgd
ben

hi benaka,
Go to dms,
Dc10, do the object linking for material/ BOM.
whatever document you have selected for object linking attach the file to it.
go to cs01n, give your material name, enter.
once you, inside the bom, select document tab, enter your document type and number and save it.
this way that document is link to that bom. and whatever the file is there inside document, you casn see it. just click it.
thanks,
regards,
nitin
award point if useful

Object Links fields grey for Production Order,BOM header,BOm item

Hello Friends,
1) In DMS Object links tab ,for objects BOM header,BOM item,Production order fields are grey even though necessary settings are done. Is this standard or I am missing some config.
I did the similar settings for other objects like material master,vendor master,claim etc and I am able to assign these objects in Object links tab.
2) In Production order I can assign the existing document but can't create document from Production order.I maintain value 1 in img Maintain screen for object link --> Auth.
Define doc type --> Define object links --> create document = 2 ( Use Transaction to Create Document)
I can create a document from other objects like Material Master,Claim,PO,PR with similar settings.
Kindly help me in this regard
Regards
Abhijit A. Pachgade

As u right said this is a standard.
generally a document can be attched from the function T-code or from the DMS T-code cvo1n, through the object link tab page. * BOTH WAYS POSSIBLE*
but for BOM, production order it is only one way, u can attach at the function T-code level like co01....ect ONLY ONE WAY
especially for PP transation, its one way
REGARDS
SURYA

Object link BOM header doesn't work

Hello,
We are in version 4.6C (standard) and I have a following problem with DMS.
I have created a document type and assigned object links STKO_DOC BOM header (screen 258). I have created other document type quite similar, just with different object links, and they work just fine. However, when I create or change my document type with tra CV01N or tra CV02N I cannot see the sheet for assigning the BOM header. I have no error messages. I have tried to compare to the standard document types and simply cannot find out what's wrong.
If I go to the tra CS02 (BOM) to assign my document - I cannot - because the list doesn't show it even though I can see it using CV02N -- CV04N.
I tried to add also object link BOM item (screen 257) but without help.
Can anybody help with this - thank you in advance.
Pipsa

Dear Pipsa,
please see SAP note 956853 and make sure that the necessary objects are maintained correctly in customizing.
Best regards
Christoph

BOM HEADER

Similar Messages

Maybe you are looking for