BOM in LSMW
Hi all,
can any one of u send me the step by step procedure to upload BOM using LSMW..
Thanks and Regards,
R.Premkumar
hi.
just follow the usual steps of LSMW for the t code cs01 (creation of BOM).
but i think u need to have two source structure for the header and the line item (child screen). i mean u have to create two flat files viz BOM header and BOM line item. then u need to give logical connection between these two..
regds,
jigar
Similar Messages
-
Hi friends,
I want to upload the bom through lsmw. I have created two sourct structures.
1. Header level
2 low level is item level.
How to assign the excel sheets for these two structures.
Please explain the steps for uploading the bom
Please help me on this
VenkatDear Venket
Please refer the below thread for your requirement :
1.How to upload the Excel sheet into SAP
2.How to transfer data from excel sheet to SAP data base ?
3.Material master upload thro' LSMW using Multiple tabs of excel sheet:
4.uploading data in exel sheet
5.Load excel sheet
Hope this will be useful
Regards
JH -
Problem while Creating BOM using LSMW Direct Input
Hi all ,
I am trying to create the BOM Using LSMW Direct Input Method .
I am getting problem at step 9 that is Read Data.
It is able to read the values from header and item files .
but it is not able to write , so the Written is 0 always .
I put the field names first in the flat file and correcponding values below it with tab delimited.
Please let me know where the Problem would be.... I am trying this from long time ..
Regards ,
Rajhi ,
Yes i am specify files i am attaching 2 files .
ones is header and the other is line item data .
my strucure is :
Hi ,
I am still getting problem while for writing the records after reading the data .....
my header structure :
STYPE
MATNR
WERKS
SELAL
STLAN
DATUV
ZTEXT
my item structure :
STYPE
MATNR
WERKS
SELAL
POSTP
MENGE
my header data :
STYPE MATNR WERKS SELAL STLAN DATUV ZTEXT
1 388 0110 20 1 06.01.2009 SAMPLE ZTEXT
my item data :
STYPE MATNR1 WERKS SELAL POSTP MENGE
1 388 0110 20 N 1234
1 382 0110 20 N 12345
Above text files are delimited by tabulator.
Please guide me . The files are reading but unable to write .....
Regards,
Raj -
Data conversion of material BOM by LSMW
Hi,
Right now I try to work on LSMW setting for data conversion of material BOM. However, I forgot how to set
the linkage of BOM header & item at LSMW since my last
experience was 1 year ago. I have set up 2 source structures, BOM_HD (header) & BOM_IT (item) from 2 files. Both source
structures contain one same source field, BOM_ID. From this identical BOM_ID field, the linkage of BOM header and items is set up between 2 files. Can
anyone know how to make the setting at LSMW ?
Thanks.
Regards,
Nancyhello nancy,
their is no need of getting seperate reacording for both header and item. it will be enough if with only one in th lsmw in the first step u select the direct input method
and at source structure level create two strucutres such that one can be for header and the other would be for item
then in the same way while specifying file give first the header file and then the item file.
at the same step check whether the convert data is getting the logical path and file name or not if u dont then double click at that possition and create it. then ur recording will be done perfectly.
if u want the entire steps with screen shot i can send u -
Add and edit BOM component in the Equi BOM using LSMW
Hi All,
I created a Batch input recording in LSMW to add BOM component in the Equi BOM (IB02). It is working fine. But my requirement is while adding it should check the material already available in the BOM, if not insert a new line or if it is there then it should only edit the quantity. Is it possible in LSMW?It is not possible with LSMW as it is an SAP standard program.
To meet your requirment you can create an BDC with help of your ABAP team and in that program you can put all the mentioned conditions and requirement you want.
hope your problem is resolved. -
Equipment BOM using LSMW- standard batch/Direct input method - reg
hi,
I tried to upload equipment BOM using standar batch / direct input method.
I have maintained sorcue structures for BOM header and Item, maintained source fields.
Both source fields have common field as equipment number.
It is working fine upto step display read data.
At step, convert data- i am getting ABAP dump.
"Data objects in Unicode programs cannot be converted" is displayed in dump
If any one tried before or experiance similar condtion before, please help
thanks & rgards,
Kiran kumar.KasturiHi,
thanks for your inputs.
In the Specify files Step ,when specifying the file from system , in separators,selected Tabulator .
and I have done already all the above while uploading my header and item file ( type tab delimited) and
still iam getting error at convert file step.
please help
thanks & regards,
Kiran Kumar.K -
Hi Experts,
I am Uploading BOM through LSMW by Direct Input method. I am having the following queries,
1. In that BOM I have Header data and Item data. While doing the Step 7(specify file) it accept the text file only not the Excel file. If I assign the Excel file means while executing the Step 9(Read Data). It gives error message, file and source structure have no fields.
So I came back to Step 7 and assign the Text file then it is accepting. What is the reason?
2. Even though It will allow to execute the Read Data steps I am getting the Header data only not getting the BOM Components data. Results data as follows,
LSM Workbench: Import Data For BOM, BOM, BOM
19.02.2010 - 14:45:57
File(s) Read: C:\Documents and Settings\Administrator\Desktop\BOM Header.txt
C:\Documents and Settings\Administrator\Desktop\BOM ITEM.txt
File Written: BOM_BOM_BOM.lsmw.read
Source Structure Read Written Not Written
BOMHEADER 2 2 0
BOMITEM 2 0 2
Transactions Read: 2
Records Read: 2
Transactions Written: 2
Records Written: 2
Can any one help me in this regards.
Regards,
Muthamil MuruganHi Girish,
Can you please explain my queries,
1. How can I maintain Source structure like as follows,
BOM - BOM - BOM Bill of Material Creation
Source Structures
BOMHEADER Bill of Material Header
BOMITEM BOM ITEM DATA
2. Just tell me the method of Maintaining source field, why i am asking you that I enter manually in table maintenance, whether i am right ?
3. During source structure maintenance for what structure relationship I have to assign source structure.
4.During field mapping and conversion rule, I got no fields relates to BOM creation, what I did is just directly go to Extras in menu and choose Auto field mapping, am I right just tell me your suggestion in detail.
5. During specify files execution I got the screen as follows,
BOM - BOM - BOM Bill of Material Creation
Files
Legacy Data On the PC (Frontend)
BOM Header C:\Documents and Settings\Administrator\Desktop\BOM Header.t
Data for One Source Structure (Table)
Separator Comma
Field Names at Start of File
With Record End Indicator (Text File)
Code Page ASCII
BOM ITEM DATA C:\Documents and Settings\Administrator\Desktop\BOM ITEM.txt
Data for One Source Structure (Table)
Separator Comma
Field Order Matches Source Structure Definition
With Record End Indicator (Text File)
Code Page ASCII
Legacy Data On the R/3 server (application server)
Imported Data File for Imported Data (Application Server)
Imported Data BOM_BOM_BOM.lsmw.read
Converted Data File for Converted Data (Application Server)
Converted Data BOM_BOM_BOM.lsmw.conv
Logical Path BOM_BOM_BOM.LSMW.CONV
Logical File BOM_BOM_BOM.LSMW.CONV
Wildcard Value Value for Wildcard '*' in File Name
Can you brief me in details in the above thing If I did any mistake.
Waiting for your reply,
Regards,
Muthamil -
Problem while writing the data (LSMW direct input method for Creating BOM )
Hi all ,
I am unable to create a BOM using LSMW standard dirrect input mehtod .
While i going through the *Read data * step , it is reading the data but unable to write the data .
My input text files are correct , Is it a problem with respect to the Logical Path or Logical File ......
Please let me know the Possibilities of arising this problem .
Regards,
RajHi,
Check this document:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d90895-68dd-2a10-f096-bf8cf2e2f65b
cheers
Aveek -
Issue during BOM LSMW changes...
Hello,
We have created BOM through LSMW but now we have an issue.
The base quantity was incorrectly uploaded as 100 EA instead of 1 EA.
Now we we try to change it though the LSMW it does not changes as it might have to go to 2 screens.
Is there a way where we can do a mass changes/LSMW to that field to change it 1 EA.
Let me know
Thanks
SAP Fans...Hi,
If u know the BOMs that have been created with incorrect quantity then u can do a recording using CS02 to change the quantity and upload the file with BOM and changed quantity.
Else if u want to upload the same file that you have used to create the BOM for changing, then u need to have a select query in LSMW in Maintain field mapping and conversion rules step at the event __BEGIN_OF_PROCESSING__ and use the CS02 recording.
Hope it is clear.
Regards,
Asif Ali Khan -
Is it possible to use batch recording method when uploading the BOM throughthe LSMW or is it more ideal to use the Direct Input method?
Hi,
When you use the batch input procedure, the system creates a batch input session containing the legacy data, and automatically processes this session. This method supplies the legacy data transaction. The system writes any transfer records that have errors to an error session for later manual processing.
When you use the direct data input procedure, the system writes the legacy transfer data directly to the appropriate tables . The system writes any BOM that have errors to an error file. This procedure normally offers improved performance, as compared to the batch input procedure. However, there are certain limitations as regards the input data and errors.
So best for you to go with second option.
Regards,
R.Brahmankar -
BOM - LSMW Field for Item Id.
Hi Friends,
I am trying to create material BOMs using LSMW direct input method using program RCSBI010. I want to update Item ID.(Externa ID) to avoid duplicate item no.(POSNR).Which field of srtucture BICSP shuld I use for this purpose?
Thank and regards
HarishIf the requirement is to have unique nos. in Item ID field in BOM, then just upload with data in the LSMW w/o specifying any Item ID, system will auto populate the field with unique nos., as mentioned in my earlier posting.
But if the requirement is to manually specify the Item ID in the upload field, then the method you have adopted does not help. You might want to consider writing a Z program by calling the FM - CSAP_MAT_BOM_CREATE or in LSMW using the same FM.
If you're not the technical person, then get in touch with your abaper who will do the needful. -
LSMW Direct Input for BOM (CS01)
Dear all,
I am trying to do LSMW for Creating BOM using Direct Input
below is the step by step that i have done :
1. Maintain Object Attributes
Object 0030 Material BOM
Method 0001 Create
Program Name RCSBI010
Program Type B Batch Input
2.Maintain Source Structures
Source Structures
BOM_HEADER BOM_Header
BOM_ITEM BOM_item
3.Maintain Source Fields
Here i maintain the Header and item fields correctly
for the header :
IDENT (identifier who linked with item),MATNR, WERKS, STLAN, STLAL, BMENG, BMEIN, STLST
for the item :
IDENT, POSNR, POSTP, IDNRK, MENGE, MEINS, SANKA
4.Maintain Structure Relations
BGR00-Bom header
BICSK-BOM item
BICSP-Bom item
5.Maintain Field Mapping and Conversion Rules
I use the autofield mapping
6.Specify Files
Legacy Data PC Frontend = i create 2 file (header and item) (both characteristic are data for one source structure, tabulator)
Imported Data = TEST-PP_PP-BOM_PP-BOM-DI.lsmw.read
Converted Data = TEST-PP_PP-BOM_PP-BOM-DI.lsmw.conv
Logical Path BOM_HEADER
Logical File BOM_HEADER
7.Assign Files = I assign 2 files Bom Header and Bom Item
8.Read Data, Display Read Data, Convert Data, Display Convert Data = is all okay
9.Create Batch Input Session = this is where the problem is, i found message "E29 811 transaction not supported"
What is the problem for this error? and how to solve this problem?
Regards,
MarufatDear,
1. Maintain Object Attributes
Object 0030 Material BOM
Method 0001 Create
Program Name RCSBI010
Program Type B Batch Input
2.Maintain Source Structures
Source Structures
BOM_HEADER BOM_Header
BOM_ITEM BOM_item
3.Maintain Source Fields
Here you maintain the Header and item fields correctly
in the source filed you have to add one field called identifier in the header and the item.
4.Maintain Structure Relations
BGR00-Bom header
BICSK-BOM item
BICSP-Bom item
5.Maintain Field Mapping and Conversion Rules
Do the filed mapping here correctly
6.Specify Files
a.Before thie you need to create 2 files.
1 file for the header material and the other one for the component material
b.In the header file you will have only one entry for one bom and it will have a idetifier number unique for each bom header
c.inthe item you will fill the rquireed number of component and also the unique identifer number.
d.this identifier is the key which joins the header and the item
7.Read Data
now once the file are all mapped
read the data,dispaly the data and try to upload for one single material.
Hope it will help you.
Regards,
R.Brahmankar -
Hi
I am uploading BOM throuh LSMW direct input ..... in this procedure i have got an error at step 7 specify files
i have specify file then i try to sve that step sysytem has given below error... pls could any guide me this procedure.
Error message:
"No logical path has been specified"
Message no. /SAPDMC/LSMW_OBJ_060046
Regards
H GVD
Edited by: hemanth.gvd on Feb 11, 2012 1:19 PMDuring file assignment when it asks for logical path and logical file for ".conv" file to be saved on the server(Double click on .conv file name). Just enter a path name and file name ( eg: ZPATH and ZFILE) and hit enter if the path doesn't exist it will create one, same with logical file name.
Look at this [screen shot.|https://lh6.googleusercontent.com/-AoGzW-nBdNs/Tzafs1eEmuI/AAAAAAAAAAk/7OY27NE3ijA/s720/image001.png] -
LSMW direct input for creating a BOM
Hi all ,
I am trying to create a new BOM using LSMW (direct input method ) .
I have created a structure for the header, an other structure as its child for the item data .
Now , i got a doubt regarding specify files ......
Since i have only one text file , how i have to mention the sequence of the header and item data .....
since i dont have the sample data ....
or ( should i use two text files , though i use 2 text files i cant use these two in the specify files .since i can upload only one file )
pls let me know , i have lots of the other questions but i cant specify in this....
Pls guide me .....
Regards,
RajHi,
You need to define the two structure header and detail. Both files should have the key fields:
For example: Both file have Plant, Material Number, BOM Usage & Valid From.
Then BGR00 and BICSK should be mapped to BOM_HEADER and BICSP to BOM_DETAIL structure.
Then just do the mapping and should work.
Hope this helps.
Regards,
Bharati Singh -
Hi,
Can anybody really suggest how to upload BOM through LSMW.
My specific questions are
do we require 2 files to upload
is header and items need to be recorded separatelyHi ,
Just my 2cent advise, Why don't you try BDC recording rather than direct input.
BDC recording is the option that you can choose to perform recording such as CS01.
TQ.
Maybe you are looking for
-
Scheduled report failures - Unexpected error getting the HTTP response
Getting this error when scheduled report executes: Unexpected error getting the HTTP response stream while generating report: http://cdmdb1c.nam.nsroot.net:4889/em/console/reports/render
-
Can I restore my music from an iPod to Itunes?
I had my Itunes library wiped on my computer. I still have my iPod with all the music on it, but I can't find any way to get the music from the iPod loaded back to the computer. Any help would be greatly appreciated!!
-
Computer STILL freezing and spinning ball after mountain lion update
I have an early 2011 Macbook and like many others I am STILL experiencing the sporadic freezing and spinning beach ball of death/ pull my hair out / F*in up my life MULTIPLE times a day for hours on in!!! I've erased all caché, reinstalled OS X Mouta
-
How can I get rid of that irritating contact/favorites across the top of the home screen?
How can I get rid of that irritating contact/favorites across the top of the home screen?
-
Ok so I had to reinstall OS X due to some networking problems. I used archive and install with saving user preferences. Everything turned out OK except for one thing. Before I installed, I had 30 GB free... and now I have 20 GB free. It's like 10 GB