BOM integrity in SAP with respect to part version, engineering changes-DMS

Hai folks,
We have a concept of engg bom and plant bom, when a part no. is intiated for the change management
it goes through a version change which is handled through DMS in SAP.
The scenario is, i want to sink the version of the part with my document version .(i.e in our plant our component part number and drawing document number are same.)
When i do a bom comparison using CS14, different field comparison's are thrown, except for the version difference.
I doubt , since DMS is a centrally controlled area, it makes no sense to compare versions in the same SAP boundary, but can it be managed through some DMS object links in our system.
Pl throw some concepts to ensure different BOM intergrity with respect to part versions and engineering changes.

Since there are no replies, I am closing this issue

Similar Messages

Integration of SAP with ADMS and OUTLOOK.

HI All,
Can any body help me with some documents on integration of SAP with ADMS and OUTLOOK.

Hi ,
Go through this link
http://help.sap.com/saphelp_nwpi71/helpdata/en/af/73563c1e734f0fe10000000a114084/frameset.htm
If Found Help Full Do Reward.
Regards.
Eshwar.

Integration of SAP with Winfax/Outlook

First I want to know the most expeditious way to import
a contact list from Outlook into SAP.
Importing an excel file (turned into a text file) can damage the database even when following guidelines
Getting the Outlook plug in to work (with patches, upgrades, minimum requirements is laborious and problematic and when finished the actual importation of
a list adds more time again to this whole process
Importing data into MSSQL and having it available in
SAP is also problematic
Just adding recipients to a distribution list seems the
least time consuming
Is there any way to do this that is quicker and easier
than just adding names in SAP in a distribution list?
Thanks
Larry Marcus

Lawrence,
This question actually does not pertain to the SAP Business One Integration for SAP NetWeaver ... so that is not a product that you would use.
With respect to your question about importing contacts from MS Outlook to SAP Business One, if you do not wish to use the SAP Outlook integration addon, and not only can a straight import using SQL be problematic but if not done correctly could cause corruption to the Business One database. I would then recommend that you look at using the SAP Business One Data Transfer WorkBench (DTW). This is an SAP tool that allows you to take text files that are comma, tab or space delimited as well and using ODBC to connect to relation database tables and graphically map the external data to SAP Business One objects such as the Business Partner Master and therefore Contacts. The DTW provides Excel template to assist in arraigning the appropriate data for import. The DTW is located with the SAP Business One installation media as an optional install.
HTH,
Eddy

Integration of SAP with Lotus Notes

Hi Friends:
How are you all doing? I have a query for you all.
Background:
I have a very customer who is currently running on SAP 4.7 Enterprise Edition Version 2. They have Lotus Notes Verison 6.5 Version in place.
Business Case:
When an employee applies for a leave, his manager should get this notification in to his LOTUS NOTES Inbox.
Right now employee's manager has to logon in SAP to check the same. So the basic requirement is to integrate SAP inbox with the LOTUS NOTES Inbox so that person can get notification of SAP workitem (leave request) in Lotus notes without having to logon to SAP.
Challenges:
1) Customer does not want to upgrade to NetWeaver hence XI will be a expensive solution to accompilish the task.
2) There are third party adapters engines available through which integration can be done at the lowest possible efforts but we are not considering this option.
3) If we upgrade Lotus notes to the version such 7.0, plug-in is inbuilt but we are also not considering this particular option.
NOTE: We are looking at the cheapest possible option.
Request for:
Please let me know can it be done using ABAP language. If yes, please send me the link so that i could refer to the alternative.
Early response will be highly appreciated.
With Best Regards
Amit Bansal.

Hi Amit,
Can u please tel me in detail, for this sap workflow - lotusnotes integration because we have same requrement at one of my client side.
and its for leave request, trip request and travel request.
they are using ITS to fill the request.they also dnt want to execute the workflow from SAP inbox.they want a link in their lotus notes mail, on clicking there a ITS screen will come from where they can approve or reject the request.
Please reply ASAP as we have very less time to do that.
Regards
Manish

Need integration of sap with documentum

can any one tell me how to integrate sap with documentum.
need urgently.
can any one tell me the procedure?
thaks&regards,
babu.
<THREAD LOCKED. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] to discover why>
Edited by: Mike Pokraka on Jan 27, 2009 10:28 AM

Integration ?
Not clear with what exaclty you mean by intergration ,
Do you want how to integrate workflows with SAP or any thing other than this
[Check This|http://help.sap.com/saphelp_nw70/helpdata/EN/a1/172437130e0d09e10000009b38f839/content.htm]

Integration of SAP with Microsoft ADS

how to integrate SAP with Microsoft ADS? also can anybody specify the API's need to be used to accomplish this???
can we use IUserMappingService or IUserFactory??can anyboby explain in detail?? so urgent

Hi James
Thanks for your reply.
This is my email id: [email protected]
As I wrote in my previous response, i would like to know whether we can use the standard UME API's to access MS ADS.
If you can send some sample code using the api's that would be of great help.
Thanks in advance.
Regards
YogaLakshmi

Integration of SAP with MS Office & Adobe Acrobat Reader using OLE

Hi Friends,
I have to integrate MS Office 2003 and ADOBE Acrobat reader with SAP very much like that demonstrated in SAPRDEMODOCUMENTCONTAINER program given in the control examples by SAP. But the problem is, the code I am developing and even in the one given by SAP has some problems in them. They are:
(1) When a MS Word or any application is opened, many of its attributes are
disabled like CTRL+ N for opening new document and CTRL+ O for opening
an existing file and many others.
(2) When I try to open an existing file using the recently used list, it is opening in
a new window but my requirement is to open it in the same window in which
the application frame is displayed over SAP screen.
(3) I am following the same procedure that is used in the above said example and
unable to understand the way methods of the inner most interface are implem-
ented like method CONTAINER_CONTROL->CREATE_DOCUMENT that is
called from within I_OI_DOCUMENT_PROXY~CREATE_DOCUMENT method. I
am clueless how it is working.
Please guide me how to solve the problem along with some good reference material that you can suggest me to study.
Thanks & Regards
Aditya P. Srivastava

Hi Adiya,
You need to pass the parameter 'open in place' to word file in same window.
CALL METHOD DOCUMENT->OPEN_DOCUMENT
EXPORTING OPEN_INPLACE = 'X'
Regards,
karthik.

Integration of SAP with 2nd party application in VB

Dear All,
We have a requirement in which we have to take data from an application made in VB with two different databases as MS SQL Server and other database as Oracle. i.e. we have to club the data from these two databases in our SAP database which it self has MS SQL.
Now the problem is that we cant make use of XI or BC or any 3rd party s/w. We have to use standard SAP and its functionality like RFC or IDOCs or etc.
So what suggestions can the expert forum members give to achieve this task ?
A quick response is highly appreciable.
Kindly be a bit elaborative in your appraoch.
Points will surely be rewarded.
Thanks,
Saurabh.

Hi ,
BAPI will suit for ur requirement.
Hoe to connect to SAP from VB
regards
Prabhu

PO net price updation with respect to contract net price change

We have a requirement: Whenever net price in Contract is changed, net price in open purchase orders (for which GR has been not done yet) which are created with reference to that contract updated automatically.
For example net price in a conract is 13 USD and there are 5 open POs. now net price (PB00) in contact is changed to 13.5 USD without changing the condition validity date, then it should be automatically updated in those 5 POs.

Hi Manoj,
This is possible using "Automatic Document Adjustment" functionality (MM - Purchasing -- PO - Follow-on Functions - AAA).
Here's the process.
1. Set Document Index active flag in pur. view of vendor master.
2. Create work list (MEI4)
3. Run MEI1
2 & 3 above can be run daily via batch jobs which will pick up contract price changes and update relevant PO's.
Cheers !
Rajesh

How to maintain Quota arrangement with respect to production verson

Hi,
I maintained Quota arrangement(without splitting) with respect to the two different production versions of a material and when i checked by running MRP. quota arrangement is not working. the system allocates the demand only to the active production version(which has the current validity period).
I guess i am missing something, can some one tell me how to maintain the quota arrangement with respect to production versions.
we have a requirement where a material is manufactured in house and will have 2 different production versions with 2 different validity periods in material master and they need the quota arrangement to work on this material in M.R.P for 2 different production versions.
I have maintained the quota arrangement usage= 3 in material master.
Thanks
Mahendra

Hi,
for the req qty to be distributed between two differnt production vesion, you might have to activate splitting in MEq1.
Give the min qty as 1, so that you req qty could be distributed between two differnt production version.
Pls conifm if it is through or if there is any other solution .
regards
Harish

Integration of SAP R/3 system with BOXI3.0 and SAP EP

Hi experts,
I have a requirement like getting data from SAP R/3 system and make it as Xcelsius Dashboard.
So i have installed BOXI3.0, SAP Integration Kit, Live Office, Crystal Report and Xcelsius. Then i have followed this blog /people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication . In this blog explined about how to connect BI System but i want to connect SAP R/3 system.
1. What is purpose of Role import option?
2. What is the type of role i need to import for connecting R/3 system?
3. Do i need to create any specific role for this?
4. How do i integrate Xcelsius dashboard with portal?
Please help me.
Regards,
Kumar.

Hi Kumar,
did you follow the installation guide for the SAP Kit and configure all parts of the publishing ?
if so check all configuration steps to see where it fails.
you can also look here:
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
SAP Authentication
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
on the ID : each object receives an ID on BusinessObjects Enterprise. You can look at the documentation and search for the CUID or GUID.
Ingo

Integrating Mobile device with SAP XI

Hai,
       In integrating mobile device with XI.
      What are the settings i need to do in ALE settings.
      what type of adapter i need to use.
please provide complete information related to SAP R/3 settings like
1. logical system
2. rfc destion nation
3. ports
4. parter profile
in XI side what are the settings i need to do.
plase provide complete information. help me out.

Please,
check the following documentation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceb31d4f-0901-0010-60bc-8162e7c6179d
It is an article about the integration of mobile devices with XI from this site.
I hope it helps you.
regards,
Jaime

Handling the context when integrating SAP with WBIMB

I need to integrate SAP systems with an integration platform that is based on WebSphere Message Broker 5 (WBIMB). Now I am looking for a feasible solution to integrate these platforms.
I am concerned about how to handle the context when integrating SAP with WBIMB.
I have read the topic SAP XI and WBI adapters (SAP XI and WBI adapters) in this forum with interest. However, my requirements are slightly different, and my knowledge on development in SAP is limited.
The WBIMB integration platform acts as an Enterprise Service Bus in a SOA. We have a general requirement about guaranteed delivery i.e. once and only once, and therefore the transport protocol is MQ. The HTTP protocol does not satisfy this requirement. Thus we can use Web Services when they are carried as SOAP messages over MQ, but SOAP/HTTP is not acceptable.
The SAP systems can act as service provider as well as service consumer. The WBIMB act as an intermediary, which routes service requests to the proper provider and service responses back to the consumer.
When acting as a service consumer, the SAP system shall specify the context such that WBIMB is able to route the service request to the service provider. Routing is based on the context, which is specified as a property in the MQRFH2 usr folder. Thus the MQ message containing the service request from the SAP system shall specify this usr property, and the value will depend on the requested service. In JMS, the value can be set by calling the TextMessage.setStringProperty method e.g. as TextMessage.setStringProperty(MyContext, XYZ).
When acting as a service provider, the SAP system shall pass the context from the request back in the response message to WBIMB. Actually, I want to pass the complete usr folder from request to response, because it contains more information than just the context property.
I need answers to the questions:
1. How can I set the context from SAP when it acts as service consumer?
2. How can I get SAP to pass the context (MQRFH2 usr folder) from request to response when it acts as service provider?
3. I have looked at the SAP XI JMS Adapter. It looks as I can set additional JMS parameters. But the property value will depend on which service to call. Do I need to setup a JMS Adapter per service or can I set the value dynamically?
4. Can the SAP XI JMS Adapter pass the context from request to response?
5. Are there better alternatives than using the SAP XI JMS Adapter?
Many thanks for any help you can give me in advance.

Hi Daniel,
Thanks for your answer. I expected it would turn out this way
So the good news is that when SAP is acting as service consumer it sounds fairly easy to set up a mapping from XI message to MQ context.
But when SAP acts as service provider it sounds as more customisation is required and I am worried about having to save the state. It will hit performance when the context is not carried as part of the message. In this case I prefer to use a generic solution on WBIMB, where I can handle the context for SAP (as well as other service providers). Then I only depend on the ability to set correlation in the response. But it will still cost performance because WBIMB also has to save the state on temporary MQ queue.
Ideally, the SAP XI/Adapter should be able to pass the context 'out-of-the-box' to better support intermediaries like the WBIMB as ESB. I put this on my wishlist
Anyway, I appreciate that you was able to confirm my observations.
BR
Allan

Capabillities of xMII with respect to TIBCO in integrating shop floor

Can any one tell capabilities of xMII in comparision with TIBCO with respect to shop floor integration and KPI generation . which is better.

First off, Like Ryan I too am bias towards xMII. Secondly I don't know that much about TIBCO, but here are some questions you ask in order to compare xMII with TIBCO:
1.) xMII is a very good data aggregate where you the customer determines what you need and how to use it. Does TIBCO have this functionality? Your applications come first in xMII, the functionality is not limited to just a set of canned KPIs, you can quickly and easily add new KPIs dependant on your needs.
2.) Shop floor connectivity is critical, Does TIBCO have the connectivity that xMII offers?
3.) xMII has great performance and is light weight. Unlike most 'Enterprise Level' application platforms, SAP xMII considers real-time to be in the order of seconds to minutes, not days or weeks. The largest overhead in an xMII installation (minus any other SAP systems) is NetWeaver.
Try to figure out you scenario, find all the business requirements you need, then check out xMII's abilities vs TIBCO. I think you'll agree that xMII can handle what ever TIBCO offers and most likely even more.
Martin.

Integration of SAP CRM 7.0 with Lotus Notes 8.5 ?

Hi,
Just wandering if anyone has integrated CRM 7 with Lotus Notes 8.5 successfully lately? I am runing into problem installing the Groupware Connector.
Aug 30, 2010 4:13:37 PM ...sap.gcn.Logger.trace(Logger.java:134) [Domino.R5.ConnectionSys-local-8] Error: java.lang.UnsatisfiedLinkError: no nlsxbe in java.library.path
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at lotus.domino.NotesThread.load(Unknown Source)
     at lotus.domino.NotesThread.checkLoaded(Unknown Source)
     at lotus.domino.NotesThread.sinitThread(Unknown Source)
     at com.sap.gcn.dominor5.local.ConnectionSysHandlerLocal.init(ConnectionSysHandlerLocal.java:42)
     at com.sap.gcn.dominor5.ConnectionAbstract$ConnectionAbstractThread.init(ConnectionAbstract.java:130)
     at com.sap.gcn.dominor5.util.Adapter$AdapterThread.run(Adapter.java:136)
Aug 30, 2010 4:13:37 PM ...sap.gcn.Logger.trace(Logger.java:134) [main] Error: com.sap.gcn.ConnectorException: [ERR: 9]: Unspecified error: java.lang.IllegalThreadStateException: Thread is canceled
     at com.sap.gcn.dominor5.ConnectionAbstract.close(ConnectionAbstract.java:62)
     at com.sap.gcn.dominor5.GroupWare.releaseConnectionSys(GroupWare.java:563)
     at com.sap.gcn.dominor5.GroupWare.initialize(GroupWare.java:100)
     at com.sap.gcn.dominor5.ConnectionTest.testConnection(ConnectionTest.java:81)
Caused by: java.lang.IllegalThreadStateException: Thread is canceled
     at com.sap.gcn.dominor5.util.Adapter.checkBridgeThread(Adapter.java:95)
     at com.sap.gcn.dominor5.util.Adapter.invoke(Adapter.java:47)
     at com.sap.gcn.dominor5.ConnectionAbstract.close(ConnectionAbstract.java:57)
Regards,
Kevin

Can you please try to do the following in the steps .
1) Search for the file nslbe.dll which can be in the folder c:\program files\notes . Add the location to the PATH variable in the environment variables.
2) Go to the installation folder for Lotus notes which might be c:\program files\Lotus\Notes\jvm\lib\ext . In this folder please put the following files Notes.jar,mail.jar,activation.jar, nslbe.dll. Please do take care that you will need to add the files in the folder ..\jvm\lib\ext
3) Add the ..\jvm\lib\ext folder location to your environment variables.
4) Create a environment variable JAVA_HOME and add the location of the jre-bin,lib and the JDK-bin,lib to this.
Restart your Server and the system where in you want to install the connector and try to run the installation again .

BOM integrity in SAP with respect to part version, engineering changes-DMS

Similar Messages

Maybe you are looking for