BOM is not getting displayed in case of centralized planning plant.

Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh Kapoor

Hi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh

Similar Messages

  • Plant for PR in case of Centralized planning plant

    Dear All,
    In case of centralized planning, if a Service PR is created then  it is taking the plant as the planning plant & not the maintenance plant.
    For example: Maintenance pLant A & Maintenance Plant B have a common planning plant as "A" & if a PR is created for maintenance plant "B" then it is taking the plant as "A" & not the other.
    please suggest where we can change the plant in case of service pr created through the maintenance order.
    Regards,
    Ritesh

    Hi,
    The planning plant will always be passed to the purchase requisition as you have found. Only alternative is to use a user exit
    For components use exit COZF0002 (EXIT_SAPLCOZF_002). The exit is called on creating purchase requisitions for components from PM/CS orders. Customer exit COZF0001 can be used for external operations.
    This exit allows change of fields in structure EBAN_ORD_CUST. Field WERKS is not included in this structure but you can append this field to the structure.  After that you have to add a line into your exit (example):         
    ... move afvgd-werks to EBAN_ORD_CUST-WERKS...                      
    Through this method it should be possible to change the plant on the requisition.
    -Paul
    Use the forum Enterprise Asset Management (EAM) for PM/CS specific topics
    Enterprise Asset Management (SAP EAM)

  • Hierarchy not getting displayed in BPS top down planning

    HI
    As per our business requirement we have enhanced planning levels 4MP70000 and 4MP80000 to make it as planning function for four quarters. This is working fine as expected but we are facing issues in hierarchy. When implemented from CRM side we are seeing them as indpendent structures and not as hierarchies. Also the constraint that the sum of child node amounts should not exceed the parent node is not getting implemented. We used the hierarchy variable 4MKTHI01.
    Please guide us what could be the issue and any help on this is greatly appreciated.
    Thanks.

    We got the sloution for this:
    We need to make the hierarchy setting and tick the check entry box in top down planning layout. Then this is automatically taken care of.
    Regards
    Sirisha.

  • Material type not getting displayed in the cube........

    Hi,
    In my infocube material type for one of the material is not getting displayed.
    When I check in the content of the cube for this material all the fileds are getting displayed except material type.
    However it is present in the material master data from which it is put into the update rules to populate in the cube.
    Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
    Can some body let me know what could be the reason.
    Thanks,
    Jeetu

    Hi Jeetu,
    can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
    You should adapt your scenario:
    - first do not use the standard attribute derivation during your URules: performance is very bad.
    - implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
    - implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
    Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
    hope this helps...
    Olivier.

  • Work item not getting displayed in the portal

    Hi  experts,
    We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
    In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
    If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of  one of the tasks 17900101 which we are using for approving the form]
    We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
    Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

    <ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
          <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
              <Properties>
                <Property name="WebDynproApplication" value="ApproveFormApp"/>
                <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
                <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
                <Property name="openInNewWindow" value="yes"/>
                <Property name="display_order_priority" value="5"/>
              </Properties>
              <Descriptions default=""/>
            </Action>
          </Actions>
        </ItemType>
    You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
    Task TS17900101 and visualization type is JavaWebDynpro
    APPLICATION     ApproveFormApp
    PACKAGE     sap.com/pa~asr~formstep

  • Header not getting  displayed in the next page in the second table

    Dear Experts ,
    I have a query regarding Header not getting  displayed in the next page in the second table of the main window. .Let me elobrate the issue.
    I have a smartform in which there are  2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is  for future delivery date P O separated by text in between.
    Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
    Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
    Please provide a elobrate solution on this problem as the requirement is urgent.
    Thanks,
    Regards,
    Sachin Hada

    Hi Sachin,
    you need to cteate two pages FIRST and NEXT.
    in first page --> FIRST
        next       --> NEXT
    in next page
      page---> NEXT
      next ---> NEXT.
    you copy the first page main window is the same in next page
    aslo
    I think help ful for you
    thanks & Regards
    BHUPAL.

  • Table PA0045 is getting updated but data is not getting displayed in Infty

    Hi,
             When i save entries for any employee in Infty 0045 , the table pa0045 is getting updated with the record.
              But FOR FEW USERS, who created the record, the data is not getting displayed in one tab of the tabstrip bur rest tabs are filled with data. Its the case with few users only .
    Regards,
    Jyoti

    Check if there is proper data to be shown in the tabstrip.
    EX.. Loan Amount Granted in the Tabstrip Basicdata ...

  • Terms and conditions not getting displayed on the last page

    Hi All,
    I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in duplex mode, but on the last page only material details are getting displayed, terms and conditions are not getting displayed.
    Can you please help me how to make the terms and conditions get printed on the back side of the last page.
    Thanks,

    I'm a bit confused by the statement "I' am unable to print the material details and terms and conditions in duplex mode".
    I suppose you meant to say "I am able to print the material details and terms and conditions in duplex mode", correct?
    If the problem is that on the last form page, the T&C is not getting printed on the back of the form, you could force the T&C page by using a flow logic command as the very last element of the main window, which gets processed when all the data is already output. For the command, use the 'Go to New Page' and specify the page name for the Terms & Conditions.
    In case this causes an issue that the last page is printed twice (since the T&C page is likely defined with the next page being NEXT_PAGE), then copy the already existing T&C page, call it LASTPAGE and leave the Next Page attribute empty.

  • WRITE STATEMENT IS GETTING EXECUTED BUT NOT GETTING DISPLAYED

    HII All,
    i hv created a selection screen with push button. Now when i m clicking that pushbutton, output is not getting displayed..when i debug program ,control enters in switch case and also executes write statement but write statement is not getting displayed.. below is the code ..
    SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
      SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002  USER-COMMAND FIR.
      SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003  USER-COMMAND SECOND.
    SELECTION-SCREEN END OF BLOCK INPUT.
           WA-EMP_NO = 123.      
            WA-EMP_CO = 'A'.
            WA-EMP_N = 'APOORV'.
            APPEND WA TO IT_TAB.
    AT SELECTION-SCREEN.
    CASE SY-UCOMM.
    WHEN 'FIR'.
    PERFORM SUB1.
    WHEN 'SECOND'.
            APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
            WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
            LOOP AT IT_TAB1 INTO WA1.
            WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
            ENDLOOP.
    ENDCASE.
    FORM SUB1.
    LOOP AT IT_TAB INTO WA.
              WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
    ENDLOOP.
    ENDFORM.
    Plz help me..
    Edited by: Julius Bussche on Jan 29, 2009 1:40 PM
    Code tags added and please dont use Caps-Lock.

    HI,
    SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
    SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
    SELECTION-SCREEN END OF BLOCK INPUT.
    WA-EMP_NO = 123.
    WA-EMP_CO = 'A'.
    WA-EMP_N = 'APOORV'.
    APPEND WA TO IT_TAB.
    * AT SELECTION-SCREEN.                 "Comment this
    START-OF_SELECTION.                     " Add this
    CASE SY-UCOMM.
    WHEN 'FIR'.
    PERFORM SUB1.
    WHEN 'SECOND'.
    APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
    WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
    LOOP AT IT_TAB1 INTO WA1.
    WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
    ENDLOOP.
    ENDCASE.
    FORM SUB1.
    LOOP AT IT_TAB INTO WA.
    WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
    ENDLOOP.
    ENDFORM.

  • First Cell value in the first row of the structure not getting displayed

    Hi Friends,
                     We've got one structure at rows level, there as per our requirement i've taken around 12 "New Selections", that's ok i'm getting everthing fine, but whatever the new selection i put on the top of that structure in that, the First Cell Value for the first column not getting displayed...
                       I'm really wondering, this is the first time that i'm facing this kind of problem... what might be the reason & what is the solution for that...
    just awaiting for your inputs...
    Regards,
    Balaji Reddy K.

    There is no declarative way to do this as the table rows are stamped. This means there is no way to can access a value like (row+1).attributename
    So there is some coding needed. Check http://lucbors.blogspot.de/2012/02/adf-11g-fancy-master-detail-or-how-to.html and http://lucbors.blogspot.de/2012/02/adf-11g-even-fancier-multi-master-multi.html which might help you to implement your case.
    Timo

  • SUN ONE Ldap - Default value is not getting displayed

    Hello,
    I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
    The default value for the attribute has been given in the SUN ONE Ldap. But it is not getting displayed in our application.
    Can any one help me in this for this issue.
    Regards,
    K. Senthil Kumar

    I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.

  • SC history update problem:PO from PR not getting displayed in SC history

    Hi
    We are on EBP 3.5,Classic scenario.
    PR's get created in R/3 backend and then are manually converted into PO.This entire cycle is shown in EBP SC history tab.However for some of the SC's we are seeing status only up to PR stage(PO no. is not getting displayed either in BBP_PD or check status txn).When we try manual status updation thru BBP_GET_STATUS_2,it throws an error saying,"these references neither GUID nor destination,thus could not be assigned to any system not even local system".
    Has anyone faced such an issue.Pl reply
    Regards
    Sanjeev

    Hi
    <u>I am not sure, is it happening for Catalog Item, free text item, or limit item in your case.</u>
    <b>Have you tried executing report CLEAN_REQREQ_UP ? What all errors appear in RZ20 Transaction, when this dump happens. ? </b>
    <u>Please have a look at the following OSS Notes, which deals with the same symptoms, you told in your response.</u>
    <b>Note 1005373 - BBPSC04: Purchase order details missing in history for STO
    Note 728894 - Creation date of the PReq in the history
    Note 989891 - BBP_GET_STATUS_2: Incorr quantity determination in back end
    Note 1023706 - Follow-on Documents Show Wrong Net-Price and Net-Value.
    Note 886099 - History: Short dump during the product conversion
    Note 925480 - Short dump in history of a purchase order
    Note 1006898 - Deleted vendor not displayed in Change hist of Shopping cart
    Note 994379 - History page:wrong exchange rate is used
    Note 725920 - Incorrect display in follow-on docs of limit shopping carts
    Note 953238 - Shopping cart history in the sourcing cockpit
    Note 949162 - Follow-on documents exist, status I1111 and I1113 active
    Note 890859 - Status/shopping cart/error message without text
    Note 927585 - GI slip and cancellation are missing in the history
    Note 730239 - Check status: Missing Backend reference
    Note 625121 - PO Ack not displayed in Check Status
    Note 758522 - Check Status: Follow-on documents in the list and history
    Note 532709 - Shop with Limit: Backend PO after requisition is not found
    Note 515475 - EBP/BBP Status BE Requis.: Probl. with Limit / UoM
    Note 555183 - EBP 3.0: Not all references found after 550783
    Note 957957 - BBPIV03:doesn't find POs when deliv.date is set
    Note 787786 - Archived PReq and reservations are missing in history
    Note 812564 - The ordered quantity of the BE-PO is not read
    Note 943679 - Termination or incorrect conversion after Note 812564</b>
    Hope this will help.
    Please reward suitable points, incase it suits your requirements.
    Regards
    - Atul

  • Total is not getting displayed in the ALV output.

    Hi,
    Total is not getting displayed in the ALV output.
    I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
    Are  there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
    source code:
    DATA: layout TYPE slis_layout_alv,
          IT_eventS  TYPE slis_t_event,
          fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    TYPES: BEGIN OF ty_tab,
          belnr TYPE dberchz-belnr,
          belzart TYPE dberchz-belzart,
          net TYPE dberchz-nettobtr,
          END OF ty_tab.
    DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
    SELECT belnr belzart nettobtr
      FROM dberchz
      INTO TABLE lt_tab[]
    WHERE belnr eq '000000000001'.
      if sy-subrc ne 0.
      ENDIF.
    *  defining layout
    layout-colwidth_optimize = 'X'.
    layout-def_status = 'X'.
    *defning event
    *event
    *defining field catalog
    fcat-col_pos = 1.
    fcat-fieldname = 'BELNR'.
    fcat-tabname  = 'LT_TAB'.
    APPEND fcat.
    fcat-col_pos = 2.
    fcat-fieldname = 'BELZART'.
    fcat-tabname  = 'LT_TAB'.
    APPEND fcat.
    fcat-col_pos = 3.
    fcat-fieldname = 'NET'.
    fcat-tabname  = 'LT_TAB'.
    fcat-do_sum = 'X'.
    APPEND fcat.
    *calling alv
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
      EXPORTING
        i_callback_program             = 'YZ_PLR'
    *   I_CALLBACK_PF_STATUS_SET       = ' '
    *   I_CALLBACK_USER_COMMAND        = ' '
    *   IT_EXCLUDING                   =
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
      EXPORTING
        is_layout                        = layout
        it_fieldcat                      = fcat[]
        i_tabname                        = 'LT_TAB'
        it_events                        = IT_EVENTS[]
    *   IT_SORT                          =
    *   I_TEXT                           = ' '
      tables
        t_outtab                         = lt_tab[]
    * EXCEPTIONS
    *   PROGRAM_ERROR                    = 1
    *   MAXIMUM_OF_APPENDS_REACHED       = 2
    *   OTHERS                           = 3
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
    Thanks,
    Gaurav

    Hi
    No I don't think, this is my code (based on your code) and it works fine:
    TYPE-POOLS SLIS.
    DATA: BEGIN OF LT_TAB OCCURS 0,
           BELNR LIKE BSEG-BELNR,
           GJAHR LIKE BSEG-GJAHR,
           WRBTR LIKE BSEG-WRBTR,
           WAERS LIKE BKPF-WAERS,
          END OF LT_TAB.
    DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
          IT_EVENTS  TYPE SLIS_T_EVENT,
          FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
          REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
    START-OF-SELECTION.
      FCAT-COL_POS       = 1.
      FCAT-FIELDNAME     = 'BELNR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'BELNR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      APPEND FCAT.
      FCAT-COL_POS       = 2.
      FCAT-FIELDNAME     = 'GJAHR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'GJAHR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      APPEND FCAT.
      FCAT-COL_POS       = 3.
      FCAT-FIELDNAME     = 'WRBTR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-CFIELDNAME    = 'WAERS'.
      FCAT-REF_FIELDNAME = 'WRBTR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      FCAT-DO_SUM        = 'X'.
      APPEND FCAT.
      FCAT-COL_POS       = 4.
      FCAT-FIELDNAME     = 'WAERS'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'WAERS'.
      FCAT-REF_TABNAME   = 'BKPF'.
      FCAT-DO_SUM        = SPACE.
      APPEND FCAT.
      SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
        WHERE BUKRS = 'MAAB'
          AND BELNR = '0000000001'.
      LT_TAB-WAERS = 'EUR'.
      MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
    *CALLING ALV
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
        EXPORTING
          I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
        EXPORTING
          IS_LAYOUT   = LAYOUT
          IT_FIELDCAT = FCAT[]
          I_TABNAME   = 'LT_TAB'
          IT_EVENTS   = IT_EVENTS[]
        TABLES
          T_OUTTAB    = LT_TAB[].
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
    I've also inserted a currency field
    Max

  • Data is not getting displayed in the report from an Infoset.

    Hi All,
    I am having a report  based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
    While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
    Could anyone please suggest why the data is not getting displayed in the query designer.
    Thanks & Regards,
    A.V.N.Rao

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • '@' not getting displayed in the ALV report

    Hello,
    I am facing  a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
    can anyone please help me in resolving the issue.
    Thanks in advance.
    Thanks and Regards,
    Santhosh Guptha N.

    @ is a default value as per ALV internal process. This is used in icons .
    I think this is causing the confusion.
    Check in the fieldcat if there is any adjsutment to be made to handle this.
    Br,
    Vijay

Maybe you are looking for

  • How do I change the time stamp on my FI_GL_6 delta?

    As of today, I am only capable of loading this once a day.   I need to be able to load this more frequently, (4 or 5 times daily) .  I know there is a field in table ROOSOURCE - DELTASAFE2, which I believe needs to be changed.  But I do not know how

  • Problem with printing after upgrade

    Hi, all. I recently upgrade from 4.10 to 5.0 sp6a, and have this problem. When i print anything, it doesnt start on the printer until i get out the program. The programas are all in clipper. This did not happend before with 4.10, and the programs has

  • Cancellation of billing doc in is retail

    Error- 0090000695 000000 Cancellation document is not the same as the original billing doc. 0090000695

  • OBIEE 11.1.1.6.0 - Users not available in RPD

    Hi Experts, I have created some users and groups by logging into weblogic Admin console -> my realms -> Users and Groups ->users. But I am not able to see these users in RPD. Restarted the services several times but still not able to see those users.

  • Re: how data is captured by area

    Hi All! Can anyone tell me how to revise data passing through to GL account details. Let me elaborate the question. a.) I need to know how all sales documents should pass through material, customer, order, quantity to any relevant account. b.) I need