Bom item data - Document assignment not getting saved in table STPO

Dear All,
As per out customer requirement, they want to display assigned drawing documents of Bom items in CS11. But it is not reflecting in cs11 eventhough we have assigned documents in Bom item detail overview Document assignment tab page. Moreover this is not getting saved in table STPO.
Waiting for solutions
Thanks & Regards
Dhananjay Kulkarni

Please understand my customers requirement,
                           Presently they are assigning drawing document of each mat in material master. And if they want to see the drawing of each component of bom through Bom maintenance then they double click on component in bom, goes to mat master then additional data then document data and then drawing. In this way they need to open minimim 5 windows, which they want to make minimum 2 windows.
          In bom they are having more than 300 components. This is not possible to define document as component with item category D of so many components. One more idea I given to them is to club all drawings in one document and define that document as component with item category D, but in this way they can't identify the individual drawing with part name.
          One more idea I given to them is to assign drawing document of individual component in item overview - Document assignment tab page from where they can open the drawing but it needs to open minimum 3 windows. So they are ready to assign drawing document in item overview - Document assignment tab page but they want, it should reflect in CS11 document column, from where they can easily open the drawing document.
          One more thing I observed that, assigned document to item overview - Document assignment tab page is not getting saved in Table STPO. I can't see this field content in STPO, which may be the reason that it is not reflecting in CS11.
         Is anything missing from Document management system?
Please think and reply friends it's Urgent.
Thanks & Warm Regards
Dhananjay Kulkarni

Similar Messages

BADI for MIGO update - Data not getting saved in table sometimes

Hi,
This is regarding automatic update of material document number to our Z Table for Gate entry in MM.
Steps for Generating GR throu2019 MIGO:-
1) the user has to key in the gate entry number and plant,
2) then after giving i/p values the user has to click the save button,
3) MIGO number is generated by the system which is updated in gate entry header table.
For updating the MIGO number BADI is used . But some time the system is not updating the GR number in gate entry header table.
Can we use COMMIT WORK statement in BADI? Hope its not advisable to use it.
What else can we do if data is not getting stored in table while updating throu2019 BADI?
Inside the Method : IF_EX_MB_MIGO_BADI~POST_DOCUMENT the below code is written,
Instead Of Updating The Gate Entry Item Table Now
Update The Gate Entry Header Table. Update The
Value Of The Field MBLNR With Current Document Number
Generated Updating the header table ZMM_GATE_ENTRY
    SELECT SINGLE *
      FROM ZMM_GATE_ENTRY
      INTO WA_ZMM_GATE_ENTRY
     WHERE GATEENTRYNO EQ GS_EXDATA_HEADER-GATEENTRYNO
       AND WERKS       EQ GS_EXDATA_HEADER-WERKS
       AND GYEAR       EQ GS_EXDATA_HEADER-ENTRY_DATE+0(4).
Check To Ensure That Once A Gate Entry Number
Is Associated With A GR It Cannot Be Reused
    IF WA_ZMM_GATE_ENTRY-GR_NUMBER IS INITIAL.
      WA_ZMM_GATE_ENTRY-REFERENCE = GS_EXDATA_HEADER-REFERENCE.
      WA_ZMM_GATE_ENTRY-REFWERKS = GS_EXDATA_HEADER-WERKS.
      WA_ZMM_GATE_ENTRY-GR_NUMBER = IS_MKPF-MBLNR.
      WA_ZMM_GATE_ENTRY-GR_YEAR   = IS_MKPF-MJAHR.
MODIFY ZMM_GATE_ENTRY FROM WA_ZMM_GATE_ENTRY .u201Dupdating the workarea
u201CThe above modify stmt updates data sometimes and does not updates the data sometimes
    ELSE.
      MESSAGE E901(ZMM) WITH GS_EXDATA_HEADER-GATEENTRYNO WA_ZMM_GATE_ENTRY-GR_NUMBER.
    ENDIF.
Plz suggest some soln?
Regards,
P.S.Chitra

Hi,
This is regarding automatic update of material document number to our Z Table for Gate entry in MM.
Steps for Generating GR throu2019 MIGO:-
1) the user has to key in the gate entry number and plant,
2) then after giving i/p values the user has to click the save button,
3) MIGO number is generated by the system which is updated in gate entry header table.
For updating the MIGO number BADI is used . But some time the system is not updating the GR number in gate entry header table.
Can we use COMMIT WORK statement in BADI? Hope its not advisable to use it.
What else can we do if data is not getting stored in table while updating throu2019 BADI?
Inside the Method : IF_EX_MB_MIGO_BADI~POST_DOCUMENT the below code is written,
MODIFY ZMM_GATE_ENTRY FROM WA_ZMM_GATE_ENTRY .u201Dupdating the workarea
u201CThe above modify stmt in code updates data sometimes and does not updates the data sometimes
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Aug 10, 2010 11:33 AM

Inbound Idoc - Date fields not getting saved

Hello,
I have created inbound idoc scenario in SAP. I receive Idoc from non SAP system to SAP system.
then data from IDoc is saved into different tables, for that I have written one function module (attached to process code)
One of the segments in IDoc type has date as a field. It is of type sy-datum.
When I receive Idoc in SAP only date fields are not getting saved in tables.
Is anything specific need to be done for date fields? please advice.

check which format you are getting into sap and make sure you are coverting in into required format.

Billing document not getting saved

Hi Gurus,
I am facing a problem with th billing doument. When I try to save the Billing through VF01, it is going to the screen and showing the line items in it. And when we save, it is generating a billing document number.But it is not getting saved.And when go and see in VF02
it is showing a message <b>Express document "Update was terminated" received from Author----
"</b>.
How to resolve this.PLS help me out in this.
Thanks in Advance
Regards
VASU

Hi Vasu
Check whether number range assignment has done. Most probably, you would not have done that.
Incidentally, I had also faced similar problem sometime back and after lot of study, I could come to a conclusion that it is because of non assignment of number range.
Thanks and dont forget to reward if this helps you.
G. Lakshmipathi

Added new fields in vendor master in xk01 but data is not getting saved

Hi experts,
To add new fields in vendor master i have followed the following steps :
1.) Appended a structure ZRTGS in LFA1 table with required fields and activated
2.) Added new button in xk01( vendor master ) using spro -> logistics-general -> business partner -> vendors ->
control ->adoption of customer's owaster data fields -> prepare modification free-enhancement of vendor master record
Created a screen group ZR and defined label tab pages with function code ZRTGS and saved entries
3.) Created a implementation for BADIs VENDOR_ADD_DATA and VENDOR_ADD_DATA_CS.
4.) Created a program with my own subscreen for the required fields
The button is getting displayed in XK01, XK02 and XK03 respectively. Whenever the button is clicked the subscreen with
the fields is also displayed. But whenever i try to save the data in either XK01 or XK02 it is not getting saved in to the
database table LFA1.
Request your help in this regard.
Thanks in Advance.

Hi,
You may need to check this include .
EXIT_SAPMM06E_008 -->Import Data from Customer Subscreen for Purchasing Document
Thanks,
vamshi

Document type created not getting saved

Hi all,
In DC10 I created document type and saved but its not getting saved?
I gave document type as CD and description as COREL DRAW and tried to save it, but its not getting saved and asking to fill the required fields so I filled
Version no. Inc as   1
class Type as      017
and class as     cl0001
and in Field selection:
Class data as display
document status as *Display and then tried to save but the save option is in hide mode.
what is a characteristic and why do we require and how to give the naming convention or numbering to it?
Because I cant see the previously created chars?
Please answer
Thx

Thanks Aby for answering
how to name the class and class type ?
I can see the class types but not class, is it a number or any other name ?
How to create character and what is the naming convention?
if I created a class and class type and character for a document type in DC10 then will they be shown in display screen CV03N?
Thx

When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator and (me)".

When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator" and my_name(me)". Also, when I do a disk permission repair, it always repairs the same applications and files. Last night, I did a disk permission repair twice and both times it took a long time and did the exact same repair both times.

Disk Utility won't repair your home folder. Sounds like your home folder permissions are messed up tho. Try repairing them this way by using Lion Recovery.
1. Restart Lion, and before you hear the chime, hold down the Command and R keys.
2. You’ll be at the Repair Utilities screen. Click the Utilities item in the Menu Bar, then click Terminal.
3. In the Terminal window, type resetpassword and hit Return.
4. The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
5. At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
The reset process takes just a couple of minutes. When it’s done, exit the programs you’ve opened and restart your Mac.
Good luck
RM

Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

11.0.10 Update Issue - Problem saving documents - getting message "This document could not be saved. There was a problem reading this document (21)." The PDF documents are being created by Esker VSIFax and the problem is only occuring with updated vers

Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices. Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved. There was a problem reading this document (21)." The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

When I try to save a doc to my server I sometimes get this: The document could not be saved. There was a Macintosh system error (-5000). What does it mean?

When I try to save a doc to my server I sometimes get this: The document could not be saved. There was a Macintosh system error (-5000). What does it mean?

What kind of file are you saving, and what sort of clientserver setup do you have?
If you're using MS Office, it doesn't play nice with OS X Server, particularly with network homes.

I keep getting "The document could not be saved. A file I/O error has occurred."

Everytime I try to save a PDF file in Reader X... "save as...PDF" I get the "The document could not be saved. A file I/O error has occurred."
When I save it "save as...Text" is saves.

No it is from a disk drive.
Robb Hanke
[signature deleted by host]

Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the

Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6

Hi,
Are you facing the issue with any pdf file?
Please try updating Acrobat to 11.0.7 and check.
You might also want to repair Acrobat and see.
Regards,
Rave

Offline Form - Data not getting saved.

Experts:
I am working on Adobe Offline Form.
When I do some changes to the offline form and save it , the same data is not getting saved.
After saving, if I close the form and reopen it again, I am not able to see the data.
What could be the reason?
Thanks
Rajeshwar

Same question was asked less than 2 days ago. And prior to that, it's been asked about 50 times now. Learn how to SEARCH before posting AND then you will get help.

While Creation Of SaleOrder Char Values are not getting saved.(V C)

Hi SAP gurus,
One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
Awaiting for your valuable reply.
Cheers,
Kumar.S

Kumar ,
If you assign values in classification view or configuration profile they will become default for the product, and it willnot be changed in sales order.
another thing if the item category is incorrect you will not get the configuration pop up at all .
problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
see the result of configuration before saving the sales order , i hoep it will work for you.
I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
Check and revert back.
Regards
Ritesh

MessageRadioButton Value is not getting saved

Hi All,
I am facing an issue with Radio Button data.
When the page loads all the "No" buttons will be selected by default.When I select "Yes" radio buttton and click on "Save", all the radio buttons will get reset to "No" and same value will get passed further. Value of "Yes" button will not get saved.
Please help me in resolving this issue.
Thanks,
Akshata

Give it a shot by trying this. Hope this helps you.
OAMessageRadioButtonBean personButton =(OAMessageRadioButtonBean)webBean.findChildRecursive("Person");
personButton.setName("partyTypeGroup");
personButton.setValue("PERSON");
personButton.setSelected(true);
OAMessageRadioButtonBean orgButton = (OAMessageRadioButtonBean)webBean.findChildRecursive("Org");
orgButton.setName("partyTypeGroup");
orgButton.setValue("ORGANIZATION");
To retrieve the value of the Radio button, which is selected use the below
System.out.println("Radio Button Value : "+ pageContext.getParameter("partyTypeGroup"));
Also, if on click of button, you should once again set the radio button by calling setSelected() to retain the same look n feel, else, the selection wud jump to the other radio button.
Basically, developer guide says, that you cannot assign the group name or checked/unchecked value to the Radio button declaratively). For more information read
Radio Group / Buttons in Developer guide.
Thanks
Saurabh
Edited by: SaurabhAg on Mar 22, 2012 12:58 AM

Bom item data - Document assignment not getting saved in table STPO

Similar Messages

Maybe you are looking for