BOM material not relevant for delivery (outbound delivery)

I'm working on BOM's, I want to make a material not relevant for goods issue, while the lowerlevel materials are relevant for picking, packing and goods issue. Where do i make this setting in the materials master. I already choose item category group ERLA on the material master, but when i create the outbound delivery, the system wants to do a goods issue on the header item.
Thanks.

Try this....
Define the material as a Phantom material in material master (MRP 2 --Special procuremet type 50).

Similar Messages

  • Handling Unit not being assigned to TO for an outbound delivery

    Hi All
    When I create a TO for an outbound delivery then a handling unit is not being assigned to the TO.
    I cannot confirm the TO as it complains about the non assignment of HU.
    I have done the following so far:
    1. Set up a default packing material w.r.t WhNo and movement type.
    2. Defined a packing group and then assigned the packing group to the packing material.
    3. Set 1 to the indicator for automatic HU creaion in customizations for automatic HU creation.
    Is there something I am missing in the configuration?
    Any suggestions would help.
    Thanks,
    Arup

    Hello,
    HU never get assign at the time of creation of TO. You can assign pick HU at the time of confirmation of TO. There are two ways
    Use transaction code LH01 and assign pick HU
          OR
    (ii)Or at the time of confirmation of TO click on pack tab and complete the packing
    Thanks,
    Milind C

  • Delivery 0080000276 is not relevant for transportation planning.

    At the time of (delivery related) invoice creation, system throws a message "check the error log".
    Log says:
    " Error Log             0080000276 000010 Delivery 0080000276 is not relevant for transportation planning
                LongText
                    Detail
                     Diagnosis
                         Copying control for billing requires that shipment costs
                         are copied from the shipment belonging to this delivery.
                         No shipment costs could be determined, because this
                         delivery is not relevant for transportation planning.
                     System Response
                         The system assumes that no shipment costs are to be billed
                         in this case.
                Technical data
                    Tech. data details
                     Client                                 251
                     Group Number
                     Sales Document Number                  0080000276
                     Item Number of the SD Document         000010
                     Schedule Line Number                   0306
                     Counter in Control Tables              00
                     Message Identification                 VY
                     System Message Number                  306
                     Output Type                            I
                     Message Variable 01                    0080000276
                     Message Variable 02
                     Message Variable 03
                     Message Variable 04
                     Group Type                             F "
    Please advice if anyone have any idea for this error log.

    Error Log 0080000276 000010 Delivery 0080000276 is
    not relevant for transportation planning
    It is not necessary to assign the Transportation Planning to Delivery type.  Only recently, I completed a similar configuration and running successfully for a client.  The issue is  because of your copy control VTFL.  For more information, check note 713171.
    thanks
    G. Lakshmipathi

  • Problem with IDoc for an outbound delivery

    Dear All,
    I am facing a problem with the IDoc defined for an outbound delivery.
    Scenario:
    Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
    What I did:
    I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
    I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
    What I can do:
    I can issue an IDoc message, it looks ok and contains the standard data.
    Problem:
    It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
    Am I using the proper exit? I appreciate any suggestions.
    Thanks,
    Grzegorz Skorus

    Hello Grzegorz
    Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
    Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases,  it may help you.
    Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
    Futher  the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
    Hope this helps and others will pitch in.
    1498409 - Valuation Type unavailable when creating deliveries using IDOC
    631913 - Exit after formatting delivery IDoc type DELVRY

  • How to set a Default variant for VL06O (Outbound Delivery Monitor)?

    Hi All,
    I want to set a DEFAULT VARIANT for  VL06O (Outbound Delivery Monitor) selection screen with "For Picking", "For Confirmation", "For Goods Issue" and "List of Outbound Deliveries" button option.
    I have already created a variant with those 4 buttons. But I cant find a way to set it as DEFAULT.
    Appreciate your help on this.
    Please note I'm using SAP ERP 6.0 Ehp 4.
    Thanks & best regards,
    Anupa

    Hi Indranil,
    Superb !
    This is what I was searching for.
    That works really fine. Thanks a lot!
    Best regards,
    Anupa

  • FM for create outbound delivery with order reference

    Hi,
      Can u pls tell me the function module name for create outbound delivery with order reference.
    regards,
    Mahi.

    Hi,
    You can use the BAPI BAPI_DELIVERYPROCESSING_EXEC
    Check this sample code..
    PARAMETERS: p_vbeln LIKE vbak-vbeln.
    DATA: BEGIN OF t_vbap OCCURS 0,
            vbeln LIKE vbap-vbeln,
            posnr LIKE vbap-posnr,
            kwmeng LIKE vbap-kwmeng,
            matnr  LIKE vbap-matnr,
            werks  LIKE vbap-werks,
          END OF t_vbap.
    DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest
          WITH HEADER LINE.
    DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems
          WITH HEADER LINE.
    DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    SELECT vbeln posnr kwmeng matnr werks
           INTO TABLE t_vbap
           FROM vbap
           WHERE vbeln = p_vbeln.
    LOOP AT t_vbap.
      t_request-document_numb = t_vbap-vbeln.
      t_request-document_item = t_vbap-posnr.
      t_request-quantity_sales_uom = t_vbap-kwmeng.
      t_request-id = 1.
      t_request-document_type = 'A'.
      t_request-delivery_date      = sy-datum.
      t_request-material = t_vbap-matnr.
      t_request-plant = t_vbap-werks.
      t_request-date = sy-datum.
      t_request-goods_issue_date = sy-datum.
      t_request-goods_issue_time = sy-uzeit.
      APPEND t_request.
    ENDLOOP.
    CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
      TABLES
        request               = t_request
        createditems          = t_created
        return                = t_return
    READ TABLE t_return WITH KEY type = 'E'.
    IF sy-subrc = 0.
      MESSAGE e208(00) WITH 'Delivery creation error'.
    ENDIF.
    COMMIT WORK.
    READ TABLE t_created INDEX 1.
    Write: /  t_created-document_numb.
    Thanks
    Naren

  • BAPI for posting outbound delivery (VL01n)

    Hi,
    I need some help in finding correct function module or BAPI for posting outbound delivery (VL01n), the requirement is I need delivery created with reference to sales order and must take following input.
    1. Shipping Point
    2. Sales Order
    3. Selection Date
    4. Delivery type
    I tried some existing ones and some do not have delivery type input and some without Shipping Point input.
    Please let me know.
    Regards
    Ram.

    Hi
    Please avoid the duplicate post .It is not as per the Forum rules.
    You have posted the same question with this title in ABAP General Forum:
    Outbound Delivery BAPI/Function module
    Neha

  • Can we make two shipment cost for one outbound delivery

    Hi team,
    Can we make two shipment cost for one outbound delivery?
    Need your suggesstions.
    Regards
    Venkat Ramana

    Hi
    I do not think that you will get a reply now as it has been too long.
    Maybe the answer is not known.
    However as the forum is growing and it takes so much time to get through all of the pages it would be nice to keep it current so could you please close your thread and either re-open a new one (this might help as people are more likely to look at curret ones) or try another forum.
    This will make life easier for everyone
    Regards
    Frenchy.

  • Function module for create outbound delivery

    Hi,
          Can any one pls tell me the BAPI function module name for create outbound delivery with order reference.
    Regards,
    Mahi

    Hi
    This is the BAPI for creating Delivery with Sales Order Reference.
    You can use the BAPI <b>BAPI_DELIVERYPROCESSING_EXEC</b>
    Check this sample code..
    PARAMETERS: p_vbeln LIKE vbak-vbeln.
    DATA: BEGIN OF t_vbap OCCURS 0,
            vbeln LIKE vbap-vbeln,
            posnr LIKE vbap-posnr,
            kwmeng LIKE vbap-kwmeng,
            matnr  LIKE vbap-matnr,
            werks  LIKE vbap-werks,
          END OF t_vbap.
    DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest
          WITH HEADER LINE.
    DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems
          WITH HEADER LINE.
    DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    SELECT vbeln posnr kwmeng matnr werks
           INTO TABLE t_vbap
           FROM vbap
           WHERE vbeln = p_vbeln.
    LOOP AT t_vbap.
      t_request-document_numb = t_vbap-vbeln.
      t_request-document_item = t_vbap-posnr.
      t_request-quantity_sales_uom = t_vbap-kwmeng.
      t_request-id = 1.
      t_request-document_type = 'A'.
      t_request-delivery_date      = sy-datum.
      t_request-material = t_vbap-matnr.
      t_request-plant = t_vbap-werks.
      t_request-date = sy-datum.
      t_request-goods_issue_date = sy-datum.
      t_request-goods_issue_time = sy-uzeit.
      APPEND t_request.
    ENDLOOP.
    CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
      TABLES
        request               = t_request
        createditems          = t_created
        return                = t_return
    READ TABLE t_return WITH KEY type = 'E'.
    IF sy-subrc = 0.
      MESSAGE e208(00) WITH 'Delivery creation error'.
    ENDIF.
    COMMIT WORK.
    READ TABLE t_created INDEX 1.
    Write: /  t_created-document_numb.
    REWARD IF HELPFUL.

  • BAPI or FM for VL10F (outbound delivery)

    Hai All,
    Can Anyone say how to create outbound delivery (VL10F) By  Using FM or BAPI.
    Explain With Example.
    Pls Most Urgent.
    Regards,
    Ekadevi.S

    Hi,
       These are the existing BAPI's for Outbound Deliveries.
    BAPI_OUTB_DELIVERY_CHANGE                                                                           
    BAPI_OUTB_DELIVERY_CONFIRM_DEC BAPI for Outbound Delivery Confirmation from a Decentralized System  
    BAPI_OUTB_DELIVERY_CREATENOREF Generates Delivery Without Reference                                 
    BAPI_OUTB_DELIVERY_CREATE_SLS  Generates Delivery for Customer Order                                
    BAPI_OUTB_DELIVERY_CREATE_STO  Generates Delivery for Stock Transport Order                         
    BAPI_OUTB_DELIVERY_SAVEREPLICA BAPI Function Module for Replication of Outbound Deliveries          
    BAPI_OUTB_DELIVERY_SPLIT_DEC   BAPI for Subsequent Outbound-Delivery Split from a Decentralized Syste
    Regards,
    Sandeep

  • Configure background job  for collective outbound delivery processing

    Hello Gurus,
        I want to  Create a background job to be executed during off-peak hours for collective outbound delivery processing.  will you please give me step-by-step configuration ?
    thanks very much!

    To set up a batch job for delivery creation use SM36 T-code.
    Input batch job name say - ZSD_CREATE_DELY_SALES_ORG
    Select class = C or B.
    Set up by / created by = BATCHADMIN or your id
    Program Name = WS_DELIVERY_UPDATE
    Varient = (as per your requirement - say for a particular sales area and plant)
    Click on "Check" icon and "Save".
    Go to the main page, select icon "Schedule a Batch job".
    Give detils like daily, weekly or periodic or Immediate.
    Enter date and time accordingly. Save it.
    Same thing applies for Invoice creation batch job.
    Use program name:RSBDCSUB
    All other steps remain the same.
    Hope this will help you out !
    Regards,
    Rajesh Banka

  • BAPI or function module for creating outbound delivery agains STO

    Hi,
    Is there any function module or BAPI to create an outboud delivery against STO?  Appreciated if anybody tells what are all the mandatory fields to pass.
    Thanks and Regards,
    Suresh

    Hi,
    Pls check the BAPIs,
    BAPI_OUTB_DELIVERY_CONFIRM_DEC BAPI for Outbound Delivery Confirmation from a Decentralized System
    BAPI_OUTB_DELIVERY_SPLIT_DEC   BAPI for Subsequent Outbound-Delivery Split from a Decentralized Syste
    Regards,
    Renjith Michael.

  • BAPI for creating outbound delivery

    Hi,
    Can anyone please let me know the bapi for creating outbound delivery.I have checked for few bapi's like
    BAPI_OUTB_DELIVERY_SAVEREPLICA
    BAPI_DELIVERPROCESSING_EXEC
    If i use the first one i would like to know whether i need to do the PGI seperately by using any bdc or is it taken care in the same bapi.
    Its basically for the workflow task werein we have all the required parameters like delivery numb, sales order num ...etc
    Iam new to BAPI's.Please consider my request and let me know the details for the same.
    thanks
    keith

    The below is for creating delivery for STO's.
        Delivery creation
          call function 'SHP_VL10_DELIVERY_CREATE'
            exporting
              IF_LEDAT           = I_LFDAT
              IF_NUR_VORGABE_POS = YES
              IT_KEY_ENQUE_READ  = IT_KEY_ENQUE_READ
              IT_KOMDLGN         = IT_KOMDLGN
            changing
              CX_SD_ORDER        = XS_SD_ORDER
              CT_VBSK_ALL        = XT_VBSK_ALL
              CT_VBLS            = XT_VBLS
              CT_KEY_LATE        = XT_KEY_LATE.
    Message was edited by: Anurag Bankley

  • How to make Delivery Item Relevant for Proof of Delivery

    Hi,
      How is it possible to make the Delivery Item relevant for Proof of Delivery (POD). What are the configuration settings required?
    Regards,
    Priyanka.

    Hi Priyanka,
    Following is the method to make Delivery Item Relevant for Proof of Delivery:
    1.  SPRO --> Logistics Execution --> Shipping --> Deliveries --> Proof of delivery
    a.Set POD-Relevance Depending on Delivery Item Category
    (In this activity, you can set the proof of delivery (POD) relevance depending on the delivery item category.)
    Put (X) Relevant for POD, for the relevent Item Categories
    b.Define Reasons for Quantity Differences
    (Define how the quantity is to be calculated (add or subtract the difference quantity, depending on whether you are dealing with an overdelivery or an underdelivery for eg. due to damage during transport).
    2. Set the Relevant for POD indicator on the Shipping tab page of the customer with whom you would like to carry out POD-processing.
    Hope it helps.
    Regards,
    Anirban Roy

  • GI:How to set Indicator:Item Not Relevant for Goods Movements LIPS-NOWAB

    Hi,
    does anybody know what i have to do to get the Indicator: Item Not Relevant for Goods Movements set for a good issue delivey position? (Table LIPS field NOWAB)
    thanks in advance
    Steffen

    Hi,
    the thing is the following (maybe it doesn't work at all, i don't know) :
    a) i have a "Non-stock" material (e.g.material type NLAG)
    b)this material should be picked, so it should be relevant for the delivery (e.g.item category TAX)
    c) for a special reason the "Total goods movement status" in the outbound delivery header shouldn't be "Not relevant", therefore i assigned the item category TAX to a shedule line category that has a movement type (e.g. CN)
    d)but the bad thing is, that the customer has set the indicators "quantity updating" and "value updating" for the material type NLAG, and so the goods issue posting gets some errors. eg.g missing storage location etc.)
    During debugging i found a coding that checks the sign NOWAB of lips, the documentation says:
    "You can use this indicator to control whether the item is relevant for goods movement when the delivery is still being created.
    When this indicator is set, goods movement is not posted for this item - regardless of the movement type assigned  to it."
    So i head the idea it might be possible to set this indication (Lips-nowab) somewhere in the sales order or somewhere else but maybe this conflicts with point c) above .
    Maybe shomeone knows what to do or has a better idea.
    Best regards
    Steffen

Maybe you are looking for