BOM: Problem using CS_BOM_EXPL_MAT_V2 - URGENT!!!

hai friends,
i am using CS_BOM_EXPL_MAT_V2 fn module in my code. when i pass mtnrv = 'GK02PB.05SBIS' , i did' get any output from the above fn module. but other than the above value like mtnrv = 'OSA875CCWOF' ,i am getting output.
thanks in advance,
With regards,
senthil kumar.r

Hi senthil,
1. I suppose u want to explode the BOM.
2. CS_BOM_EXPLOSION
   use the above FM
   in the below mentioned fashion.
3.
CALL FUNCTION 'CS_BOM_EXPLOSION'
   EXPORTING
   capid                       = 'PP01'
   emeng                       = bmeng
   datuv                       = sy-datum
   mtnrv                       = matnr
   stlan                       = '1'
     werks                       = werks
     mehrs = 'X'
IMPORTING
TOPEQUI                     =
TOPMAT                      =
TOPTPL                      =
DSTST                       =
    TABLES
      stbd                        = stbd
      stbe                        = stbe
      stbk                        = stbk
      stbm                        = stbm
      stbp                        = stbp
      stbt                        = stbt
EXCEPTIONS
   alt_not_found               = 1
   call_invalid                = 2
   missing_authorization       = 3
   no_bom_found                = 4
   no_plant_data               = 5
   no_suitable_bom_found       = 6
   object_not_found            = 7
   conversion_error            = 8
   OTHERS                      = 9
regards,
amit m.

Similar Messages

Multi-level BOM explosion using CS_BOM_EXPL_MAT_V2

Hi All,
I would like to know, if anyone has used the function module 'CS_BOM_EXPL_MAT_V2' to prepare a report to read multi-level BOM just like CS12. If anyone has, can you please let me know how we can read the individual materials in the BOM from this FM.
Hope my question is clear, await inputs.
Vivek

Hi vivek,
We use this code to restrict the BOM line item for particular movements. C if that can help u out.
CALL FUNCTION 'CS_BOM_EXPL_KND_V1'
 EXPORTING
 capid = ''
 datuv = sy-datum
 emeng = 1
 mehrs = 'X'
 mtnrv = i_mseg-matnr
 stlal = '1'
 stlan = '1'
 stpst = 0
 svwvo = 'X'
 werks = i_mseg-werks
 vbeln = aufk-kdauf
 vbpos = aufk-kdpos
 VERID = ' '
 vrsvo = 'X'
 IMPORTING
 TOPMAT =
 DSTST =
 TABLES
 stb = ZStb
 MATCAT =
 EXCEPTIONS
 alt_not_found = 1
 call_invalid = 2
 material_not_found = 3
 missing_authorization = 4
 no_bom_found = 5
 no_plant_data = 6
 no_suitable_bom_found = 7
 conversion_error = 8
 OTHERS = 9
IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT zstb BY mtart.
LOOP AT zstb.
 IF zstb-mtart = 'Material type ' OR zstb-mtart = 'Material type ' .
 ELSE.
 DELETE zstb .
 ENDIF.
ENDLOOP.
CLEAR: v_menge, v_matnr, v_bwart, vv_menge, vvv_menge, zstb.
LOOP AT zstb.
 SELECT menge matnr bwart
 INTO (v_menge,v_matnr,v_bwart)
 FROM aufm
 WHERE aufnr = i_mseg-aufnr
 AND werks = i_mseg-werks
 AND matnr = zstb-idnrk
 AND ( bwart = '261' OR bwart = '262' ).
 and meins = 'FT2'.
 LOOP AT zstb.
 SELECT SINGLE matnr INTO vv_matnr FROM mara WHERE matnr = v_matnr
 AND mtart = zstb-mtart.
 IF sy-subrc = 0.
 CASE v_bwart.
 WHEN '261' .
 vv_menge = vv_menge + v_menge.
 WHEN '262' .
 vvv_menge = vvv_menge + v_menge.
 ENDCASE.
 ENDIF.
 ENDLOOP.
 ENDSELECT.
 CLEAR vf_menge.
 vf_menge = vv_menge - vvv_menge.
 CLEAR vv_menge.
 CLEAR vvv_menge.
Regards,
Vishal

Connectivity problem using tg4msql - urgent

Hi,
I'm trying to setup a DB link between Oracle and SQL server. Configuration and Tnsping is OK but when I select data using the ddlink it fails.
SQL> select * from bouba.employees@poste;
select * from bouba.employees@poste
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL]DRV_InitTdp: [Microsoft][ODBC SQL Server
Driver][SQL Server]Échec de la connexion de l'utilisateur 'BOUBA'. Raison : Non
associé à une connexion sécurisée SQL Server. (SQL State: 37000; SQL Code:
18452)
ORA-02063: preceding 2 lines from POSTE

How did you create the database link?
You normally have to use the following syntax:
create database link hsodbc ocnnect to "sa" identified by "sa" using '<tns alias>';
Make sure to surround the username by double quotes; UID/PWD in SQL Server is case sensitive.
You MUST specify a username and password; else an OS (Windows) Authentication will be used and this fails.
Reason is, that the listener process (spawning the hs process) normally runs as local system and this user is not allowed to authenticate....

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

Problem using WEBUTIL_FILE_TRANSFER.URL_To_Client_With_Progre

Dear Friend,
Whenever I am trying to transfer the report using WEBUTIL_FILE_TRANSFER.URL_To_Client_With_Progress the report is getting transfered from application server to client successfully. But when i am opening the report at clientside adobe reader is giving error "Adobe could not open file test1.pdf because it is either not a supported file type or because the file has been damaged".
But when i am seeing the report output in enterprise manager it is properly opening in pdf.
Please see the below code for your reference :
declare
v_rep varchar2(100);
v_rep_stat varchar2(200);
repid REPORT_OBJECT;
v_mode varchar2(1000);
xstatus boolean;
xclient_filename varchar2(1000) := 'e:\sam\new\test1.pdf';
xserver_filename varchar2(1000) := 'f:\dump\test1.pdf' ;
repid := find_report_object('r1');
set_report_object_property(repid,report_comm_mode,synchronous);
set_report_object_property(repid,report_execution_mode,batch);
set_report_object_property(repid,report_server,repserv);
set_report_object_property(repid,report_destype,file);
set_report_object_property(repid,REPORT_DESNAME,xserver_filename);
v_mode := ' mode=default';
set_report_object_property(repid,report_desformat,'pdf');
set_report_object_property(repid,report_filename,'test');
set_report_object_property(repid,report_other,v_mode);
v_rep := run_report_object(repid,plist);
v_rep_stat := report_object_status(v_rep);
if v_rep_stat = 'FINISHED' THEN
xstatus := WEBUTIL_FILE_TRANSFER.URL_To_Client_With_Progress('http://development:7778/reports/rwservlet?'||'&server='||repservername,xclient_filename,0,'Download','Save','Saving Output File');
if xstatus then
message('Report Generated Successfully');
message('Report Generated Successfully');
end if;
end if;
Please point out where is the problem. Its urgent.

I can see at least one error in the line with URL_To_Client_With_progress. I haven't tried fetching PDF's this way myself, so I don't know if it will work, but in any case - you specify the reports server file name correctly, but there's no indication of the jobID to fetch the generated PDF for.
Does this work?
xstatus := WEBUTIL_FILE_TRANSFER.URL_To_Client_With_Progress('http://development:7778/reports/rwservlet/getjobid' || repid ||'&server='||repservername ,xclient_filename,0,'Download','Save','Saving Output File');
Jacob

Tunneling Problem using HttpsUrlConnection

Hi,
I had gone through forums regarding this topic and still i am facing the same problem using the HttpsUrlConnection. We are working behind a proxy so we have to make a proxy authorization if we want to connect to a server in the internet.
But in case of HttpUrlConnection, everything works
fine. But if we do the same with a HttpsUrlConnection, the authentication fails. It throws an IOException
with the message
Unable to tunnel through 192.9.100.10:80.
Proxy returns "HTTP/1.1 407 Proxy authentication required"
Sample code as follows,
The following code doesn't have any problem becos it works fine with HttpUrlConnection and also it is working without proxyserver for https as well.
This is running under MSVM.
I don't want to use SSLSocketFactory and i need to use following layout(i.e only with Httpsurlconnection)
Is there any way to make work with proxyserver? Or can't we do this at all?
System.setProperty("proxySet","true");
System.setProperty("https.proxyHost","proxyIP");
System.setProperty("https.proxyPort","80");
OutputStream os = null;
OutputStreamWriter osw = null;
InputStream is = null;
InputStreamReader isr = null;
BufferedReader br = null;
URL url;
String line = null;
System.setProperty("java.protocol.handler.pkgs","com.sun.net.ssl.internal.www.protocol");
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
String login = proxyUserName+":"+proxyPassWord;
String encodedLogin = new sun.misc.BASE64Encoder().encode(login.getBytes());
url = new URL("https://www.verisign.com");
HttpsURLConnection con = null;
con =(HttpsURLConnection) url.openConnection();
con.setRequestProperty("Proxy-Authorization", encodedLogin);
con.setRequestMethod("GET");
con.setDoOutput(true);
con.setDoInput(true);
con.setUseCaches(false);
con.connect();
os = con.getOutputStream();
osw = new OutputStreamWriter(os);
osw.write("SampleMsg");
osw.flush();
osw.close();
is = con.getInputStream();
isr = new InputStreamReader(is);
br = new BufferedReader(isr);
while ( (line = br.readLine()) != null)
System.out.println("line: " + line);
Can any one help me regarding this?I need a reply very urgently.
Thanks,
Prabhakaran R

Hope this help.
Note to change the properties to fit your system, and use the supported package ( JSSE, JRE1.5.......).
You can use URLConnection for both HTTP or HTTPS protocol.
import java.io.*;
import java.net.*;
import java.security.*;
import java.util.*;
import javax.net.ssl.*;
public class testSSL9 {
public testSSL9() {
byte[] data = httpConnection();
System.out.println(new String(data));
public static void main(String[] args) {
Properties sysprops = System.getProperties();
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
// sysprops.put("java.protocol.handler.pkgs",
// "com.sun.net.ssl.internal.www.protocol");
sysprops.put("java.protocol.handler.pkgs",
"javax.net.ssl.internal.www.protocol");
sysprops.put("javax.net.ssl.trustStore",
"D:/jdk1.4/jre/lib/security/cacerts");
sysprops.put("javax.net.debug", "ssl,handshake,data,trustmanager");
sysprops.put("https.proxyHost", "172.16.0.1");
sysprops.put("https.proxyPort", "3128");
sysprops.put("https.proxySet", "true");
sysprops.put("http.proxyHost", "172.16.0.1");
sysprops.put("http.proxyPort", "3128");
sysprops.put("proxySet", "true");
testSSL9 testSSL91 = new testSSL9();
private byte[] httpConnection() {
try {
URL url = null;
// String strurl = "https://www.verisign.com";
String strurl = "https://central.sun.net";
// String strurl = "http://www.yahoo.com"; --> use: HttpURLConnection
url = new URL(strurl);
HttpsURLConnection connection = (HttpsURLConnection) url.openConnection();
HttpsURLConnection.setFollowRedirects(false);
connection.setDoOutput(true);
connection.setDoInput(true);
connection.setUseCaches(false);
connection.connect();
InputStream stream = null;
BufferedInputStream in = null;
ByteArrayOutputStream bytearr = null;
BufferedOutputStream out = null;
try {
stream = connection.getInputStream();
in = new BufferedInputStream(stream);
bytearr = new ByteArrayOutputStream();
out = new BufferedOutputStream(bytearr);
catch (Exception ex1) {
System.out.println(ex1);
System.out.println("Server reject connection...sory");
int i = 0;
while ( (i = in.read()) != -1) {
out.write(i);
out.flush();
stream.close();
in.close();
bytearr.close();
out.close();
return bytearr.toByteArray();
catch (Exception ex) {
ex.printStackTrace();
return null;
}

Triggers problem - please help - urgent !!

To all experts, please help me with this problem - need answer
urgently. Thanks in advance.
Using Oracle 8 Rel 8.0.6
I have 2 tables (table Y, table Z).
In the 'after insert upd del on each row trigger' (lets call it
AIUD trigger)on table Y, based on certain criteria, I insert a
record in table Z.
New requirement is that whenever a record is inserted in table Z
(fyi, inserting any record in table Z is possible only when
records are inserted in table Y as mentioned earlier thro the
AIUD trigger - i.e. there is no frontend way to insert records
in table Z), if certain (new) criteria is satisfied, I should
insert 1 record in both, table Y and table Z.
I tried to create meet the new requirement by adding code to
existing AIUD trigger but ran into mutating tables error. So I
dropped this idea.
I have now created 'after insert on each row trigger' (lets call
it NEW_TRIGGER) on table Z to meet the new requirement but have
these 2 problems :
1) the trigger always compiles with errors
2) if I still go ahead and insert a record in table Y, I get the
foll error msgs :
ORA 4098 - NEW_TRIGGER is inv
ORA 6512 at line xxx on AIUD
ORA 4088 error during execution of trigger AIUD
What is the best way to work on this requirement or what am I
doing wrong ?
Thanks again,
AG.

Your restatement of the problem merely confirms what the previous
posting said. You cannot write a trigger on table Y that inserts
a record into table Y: that's the mutating trigger problem
(there's oodles of postings on the subject, not to mention
online Oracle docs). You could write a trigger on table Z that
inserts into table Y - but you need to be able to see the value
I3 which (presumeable) you can't.
One solution is to use code the trigger on table Y to submit a
call to DBMS_JOB which initiates a procedure that inserts a
record into table Y.
You must remember that the new record in table Y must never
include the value I3, otherwise you'll end up w/ an infinite
loop.
rgds, APC

Problem using File sharing in a small office network

I have a problem using File sharing on an Imac and Macbook Pro.
My office has a small network running Windows Small office file server 2003. I have one Windows 2000 PC connected to it and 3 Macs, an 2.4 gHz Intel iMac running Leopard 10.5.6 , a MBP running the same and a Mac Mini running 10.5.
From the Finder Shared window of the Mac Mini, I can see all the computers on the network. It also used to be the case for the iMac, but the MBP could never see the Windows PC’s, not the server or the Win2000. This wasn’t a big problem as I was communicating between the Macs and using the shared printer on the iMac.
On Monday Jan 19 the iMac was suddenly unavailable to the other 2 Macs. It was working normally on the Friday. The iMac can access the Mac Mini and copy files to it. The Mac Mini can see the iMac but cannot access it. Even trying to connect as, ends in a failed connection. I have tried rebooting, turning File sharing off and then on again to no avail.
The iMac now also cannot see the Windows PC’s which it previously could.
To get files from the MBP for printing, I now copy it to the Mac Mini and acces the folder from the iMac, a very tedious procedure. I don’t know why this happened and am scared that the Mac Mini is going to do the same thing.
All three computers are also running VMware 2.0 with Windows XP pro, and from VMware the server is visible on all the computers.
Any help will be much appreciated, I live in a small town in South Africa and the local computer suppliers have no knowledge of the Macs.
I think that the problem with the iMac may have started after a software upgrade to 10.5.6 but I am not entirely sure.
Thank you
ajdk

Well, you're current method sounds pretty good. But if you want to user a file server, hey go ahead.
What you want to do when you centralize project files is to keep track of which one is the newest and becareful not to overwrite files with the same name. So you either have to set up individual spaces on the server (separate AFP/FTP folders maybe), or you'll need to run a file checkout service.
The individual space is cheaper, but it's not much of a difference from backing up to the network drive. Since you have Gigabit connections, you might even opt to save ALL the user files on the server instead of just the project files.
If you want to run a file checkout service, there's two approaches. You can run a service that can host any kind of file, or you can run a version control system for each kind of application (Photoshop, Word, etc.). Please notice, that as you read further and further along, the methods become more and more expensive and complicated. Once you get to this point, it will be necessary to purchase or build software in addition to the Mac OS X Server package.

Huge problem using apple mail while sending email to a group...

Hey - I am quite confused... apple mail has huge problems using groups with about 150 addresses when writing and sending an email... the writing of emails is nearly impossible. Once the group name is inserted in the addressline (address book in iCloud!), apple mail uses nearly 100% CPU and further writing is nearly impossible. When sending such an email, all addresses are suddenly visible - though the box is NOT checked and the addresses should be hidden... what can I do? I use this feature (sending mails to groups) on a daily basis and cannot accept visible addresses...
Greetings and sorry for inconvenient english...
Christof

How about next time you send to the group, cc yourself, or include yourself in the group. Then receive the email on the iphone, you can "reply all" in order to send to the group. If you use an imap account, you can make a new folder, call it something like "groups", and save different group emails there for the next time you need to "reply all".

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
~Lyssa

Problem using integrated WLS in jDeveloper 11.1.2.1.0

Hey there,
I got a problem using the integrated WLS from the jDeveloper 11.1.2.1.0.
After trying to deploy an ADF Web Application on the integrated WLS, I get the following log message:
LOG
+[Waiting for the domain to finish building...]+
+[11:26:04 AM] Creating Integrated Weblogic domain...+
+[11:28:13 AM] Extending Integrated Weblogic domain...+
+[11:30:06 AM] Integrated Weblogic domain processing completed successfully.+
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
+/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/bin/startWebLogic.sh+
+[waiting for the server to complete its initialization...]+
+.+
+.+
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
+.+
WLS Start Mode=Development
+.+
CLASSPATH=/home/robin/bin/wls/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/robin/bin/wls/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_oepe100/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/jdk160_29/lib/tools.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic_sp.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.jar:/home/robin/bin/wls/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/webservices.jar:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/robin/bin/wls/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/robin/bin/wls/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/xqrl.jar
+.+
PATH=/home/robin/bin/wls/wlserver_12.1/server/bin:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/bin:/home/robin/bin/wls/jdk160_29/jre/bin:/home/robin/bin/wls/jdk160_29/bin:/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/games/bin
+.+
+* To start WebLogic Server, use a username and *+
+* password assigned to an admin-level user. For *+
+* server administration, use the WebLogic Server *+
+* console at http://hostname:port/console *+
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
+/home/robin/bin/wls/jdk160_29/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.policy -Djavax.net.ssl.trustStore=/tmp/trustStore7618453572230021232.jks -Dhttp.proxyHost=emea-proxy.uk.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=localhost|localhost.localdomain|127.0.0.1|::1|MUELLER-BADY-GENTOO|MUELLER-BADY-GENTOO -Dhttps.proxyHost=emea-proxy.uk.oracle.com -Dhttps.proxyPort=80 -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=/home/robin/bin/wls/jdk160_29/jre/lib/endorsed:/home/robin/bin/wls/wlserver_12.1/endorsed -da -Dplatform.home=/home/robin/bin/wls/wlserver_12.1 -Dwls.home=/home/robin/bin/wls/wlserver_12.1/server -Dweblogic.home=/home/robin/bin/wls/wlserver_12.1/server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=/home/robin/bin/wls/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain -Djrockit.optfile=/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/servers/DefaultServer -Doracle.domain.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/carml -Digf.arisidstack.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/robin/bin/wls/oracle_common/modules/oracle.ossoiap_11.1.1,/home/robin/bin/wls/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/oracle/store/gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/robin/bin/wls/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_oepe100/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server+
+<Feb 10, 2012 11:30:09 AM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>+
+<Feb 10, 2012 11:30:10 AM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>+
+<Feb 10, 2012 11:30:11 AM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>+
+<Feb 10, 2012 11:30:12 AM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>+
+<Feb 10, 2012 11:30:15 AM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <Log Management> <BEA-170019> <The server log file /home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>+
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager saveKeyStore
WARNING: Failed to save farm keystore. Reason {0}
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager createKeyStore
WARNING: Failed to save farm keystore. Reason {0}
oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)+
+ at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)+
+ at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:850)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+ at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)+
+ at java.lang.reflect.Constructor.newInstance(Constructor.java:513)+
+ at java.lang.Class.newInstance0(Class.java:355)+
+ at java.lang.Class.newInstance(Class.java:308)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+ at weblogic.security.SecurityService.start(SecurityService.java:148)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>+
+<Feb 10, 2012 11:30:24 AM CET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+ at weblogic.security.SecurityService.start(SecurityService.java:148)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:293)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:899)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ Truncated. see log file for complete stacktrace+
+Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:860)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ Truncated. see log file for complete stacktrace+
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+ Truncated. see log file for complete stacktrace+
+>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>+
Process exited.
*/LOG*
After that, I tried setting permissions for the cwallet.sso file to ugo+rwx, but this leads to the same problems as mentioned above.
My second try was to setup an external WLS 12c, but it seems to be not yet possible to connect to a WLS 12c from within jDeveloper.
Do you have any ideas ?
Thank you in advance for your help.
Regards,
Robin

After debugging the WLS Initialisation with jdb, I recognized that there was some trouble with dependent libraries.
In the end, I solved my problem by using another OS (Ubuntu 11.10) for development. There, the WLS works out of the box, even with 64-Bit libraries.
Thank you for your help.
Regards,
Robin

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Calendar Server 3.5: Problem using user's ID with uniuser -mod command

When there are two users who have the same Common Name (CN) in LDAP but
different User ID's (uid
field), I have a problem using the uid
field as an argument to
uniuser -mod in Netscape Calendar
Server (NCS) 3.5. For example, there may be two users, User1 and User2, who
both have the CN "John Smith." 

User1
uid: jsmith2
sn: Smith
givenname: John
nscalxitemid: 10001:00314
User2
uid: jsmith
sn: Smith
givenname: John
nscalxitemid: 10001:00213

Let's say I want to change the value for nsCalOrgUnit2
for User1 to "jsmith." In NCS 4.0,
I can specify the uid as
an argument to uniuser -mod
. However, in NCS 3.5, if I specify the
uid as an argument to
uniuser -mod, the entry
for the user does not get changed. 

Calendar Server 4.0 

%uniuser -mod "ID=00314" -m "OU2=jsmith/OU3=People" -n 10001
 
uniuser: modified "Smith, John" 

(The LDAP entry for User1 also reflects this change.)

Calendar Server 3.5 

%uniuser -mod "ID=00314" "OU2=jsmith/OU3=People" 10001
 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

%uniuser -mod "S=Smith/G=John/ID=00314" "OU2=jsmith/OU3=People"
10001 
uniuser: no need to modify "Smith,John" 

(The LDAP entry for User1 does not reflect the change.) 

If I use the command uniuser -mod "S=Smith/G=John"
"OU2=jsmith/OU3=People" 10001
in NCS 3.5, the script will change the entry of the first "John Smith" in the
database and will cause the LDAP entry for this user to be updated as well.
However, the entry modified may or may not be the correct one. So, in
NCS 3.5, is there a way to specify a particular uid
to ensure that the correct LDAP entry
is modified?

To modify a user's information using the uid
field in Calendar Server 3.5, change
the user.ini file. The
following steps show how to change a user's information by modifying the
.ini file: 

<OL>
<LI>Open the user.ini
file, which is in the path /users/unison/misc/user.ini

<LI>Add a section containing the desired changes. For example, 

[Test] 
OU2 = jsmith 
OU3 = People 

<LI>Run uniuser with
the following options: 

% uniuser -mod "ID=00314" -s Test 10001
</OL>

It turns out to be a problem with the user Keychain. It has some weird entry that was sending the wrong password. I delete all entries to the server and that corrected the problem

Problem using a conditional suppress in a cross-tab ?

is there a problem using a conditional suppress in a cross-tab on a row or summarized field in crystal XI?
I am using the following conditional suppress on a summarized field and its rows
         If {@SortCode}=4 then true;
Sortcode is a group sorting formula field
the summarized field is a formula field as well.
All of the summarized fields are suppressed although the cross- tab performs correctly on @Sortcode and the summarized field when not using the condition
it seems to me to be a reporting flow issue although i've included "whileprintingrecords" and "evaluateafter" with no success.
i have also moved the cross-tab from the report header to group header and applied a conditional suppress on the group header through section expert.
this supresses the group i dont want but includes grand totals for each group and also varys the number of columns
i can't filter on sortcode because one of the grand total calculations requires those records and a subreport or second cross-tab does not contain the same number of columns
the cross-tab is necessary as a client may have columns spanning one to many pages
thanks for your help

Hi I have a similar problem,
I have an clock in solution, where i have some dates with data such as, various entries for a date eg, 01/11/2010 1hr, 01/11/2010 3 hrs etc, 03/11/2010 2hrs , 05/11/2010 4.5hrs, 05/11/2010 4 hrs so i need total for each day and highlight only those days, where total is less than 4.5, including days which donu2019t have records eg 02/11/2010 & 04/11/2010, I summarise in totals using a cross tab, to get summarised output for each day as,
            Totals
01/11/2010    4
03/11/2010    2
05/11/2010    8.5
in order to get the dates which didnu2019t have records, i added a dataset from Excel spreadsheet where i just have a sequential dates for the year , and use record selection to select only those dates in range which i need to display, so the result i get
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
05/11/2010    8.5
so far so good, all using cross tab, now i want to suppress rows which have total > 4.5 so the result should be
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
How can i do that?

Could not complete the command because of a problem using the Adobe Color Engine

Hi all
This bizarrely started this morning - completely out of the blue - and I've no idea why.
Setup: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)
Am working on images exported from LightRoom 4 (16bit A3 Pro Photo RGB PSDs) in PhotoShop CS5.
As part of my image grading process I have a PhotoShop Action that does the following: copy layer to new document (document respects all of copied layer settings) > Image > Adjustments > HDR toning > apply a certain HDR preset > copy to resultant image back to original doc > set opacity as 40%.
Totally out of the blue, after having this action for about 2 months, this morning I start getting a warning dialog of "Could not complete the command because of a problem using the Adobe Color Engine" and the action fails. The failure seems to take place at the 'make document' part of the action and seems to somehow be related to the contents of the clipboard.
I've tried trashing and re-creating the action. It works first time out fine and then - on the next image - errors again.
At present I can only safely carry out the work 'manually' by completing all the actions myself.
I can think of no settings that have changed and the OS hasn't been updated in a while.
I have found one other thread on a similar problem in PhotoShop Elements, but no definitive solution.
Any help appreciated as I have a shedload of stuff to process.
Best wishes
TP

OK: trash of prefs didn't work. Tried thrice. Re-created orig action. same problem.
BUT!
Your 'Image > Duplicate' suggestion does seem to work. If I use that in a new action as the method for creating the HDR version doc (instead of 'Select > Copy > New > Paste), it seems to work.
Will try that out this afternoon, but for now: WIN!
Many thanks for the suggestion!
TP

BOM: Problem using CS_BOM_EXPL_MAT_V2 - URGENT!!!

Similar Messages

Maybe you are looking for