BOM selection in sales order
hello, friends.
when selecting the BOM in the sales order, the selection screen displays alternative BOMs for 1 usage type only, and will show the other usages one at a time only if the first type does not exist. the sequence depends on the priorities (access sequence) set in IMG, and settings in item category.
my questions are:
1. does the 'next page' button in the selection screen refer to additional BOMs of the only same usage type?
2. is it possible to show other usage types in the same selection screen? if yes, where do we configure this
many thanks for your inputs.
hello, Rags.
actually, BOM selection is working fine for us. my question was more of a theoretical one. to clarify the issue, let me cite an example:
1. for material A001, i create 5 alternative BOMs.
2. of these 5 BOMs, 3 have usage type SD, and 2 have usage type Production.
3. when you enter your BOM header material in the sales order, a selection screen will appear. because of the priorities set in IMG, it will show you only the 3 alternate BOMs of the SD usage type.
3. the system will display the 2 other production BOMs only if there are no SD usage BOMs or if these have been deactivated, or if you change the order of priority in IMG.
4. you cannot change the usage type in the BOM selection screen because this field is not available for input. there are "next page" buttons, and i'm wondering if this is or is not just for long lists of alternate BOMs with a single usage type.
my question: is it possible to show all 5 BOMs regardless of usage in the same list, or in different pages?
many thanks.
Edited by: jonathan y on Apr 3, 2009 7:55 PM
Similar Messages
-
Hi Experts,
I have met a problem in BOM explosion in sales order.
I have maintained the BOM with usage 5 and the conversion between header material and component of the BOM. But in the sales order entry, no matter how many qty I entered for the header material, after the BOM explosion, the qty of component is 1.
Can anyone help?
Regards,
EmilyHi,
Go to CS02 and select ur bom and go to components give 1 that means 1;1
hope u get it
regards,
sadanandam kasarla -
Can some one bring our the difference between BOM usage in the creation of a material bom and a Sales order BOM - To be more specific, when you are creating a BOM using the tcode cs01, I get a field called BOM usage where I can select it as 5 and define it as relevant to Sales and Distribution. I can also create a BOM which is Sales order specific using CS61 tcode. what is the difference between the two? When will the bom created using CS61 explode and when will the other one explode?
Thanks for your reply in advance....Hi
while using the material in each dept. the usage differs so for that sap provided this function. for sales bom is used only sales and also that material already exist in the plant. and mm bom the material has to procure from the some third party that all functionality will control throgh the maitaning bom usage.
further your explanation i give below info.
Text
BOM Usage
Definition
This key defines the area (such as engineering/design or production) where a BOM can be used.
Use
By setting various indicators, you can define the maximum configuration of the item status and define whether an item must be or cannot be processed in a particular area (such as production).
Examples
A material is used in the areas production and costing in a company. For each area, you maintain a separate BOM with different items:
Production BOM:
This BOM contains items that are relevant to production. These items are copied to the planned order. Dependent requirements are generated for them, and they are copied to the production order.
Costing BOM:
This BOM contains items that are relevant to determining the material costs of a product.
When you calculate production costs using a quantity structure, the system automatically determines the BOM and all the BOM items that are relevant to costing, in order to calculate manufacturing costs.
pls find the config table which will give u clear picture about bom usage.
STLAN PMPFE PMPKO PMPKA PMPRV PMPVS PMPIN PMPER ANTXT
1 + . . - - - . Production
2 . + . - - - . Engineering/Design
3 . . . . - - . Universal
4 - - . - - + . Plant Maintenance
5 . . + + - - . Sales and Distribution
6 . . + . - - . Costing
7 . - . . - - - Empties
8 - . - - - - - Stability Study
M . . . . - . . External Munitions Display
Z + . + + - - . Rebranding Sales BOM (1:1)
Thanks
Regards
Hari Shankar -
Hi all,
I have a finished good is ABC, strategy is 20 (make to order).
I have a variant for ABC, the quantity of components in ABC is 1 pc. When I create a Sale order, I have to choose some characterristics. It depend on requirement of customer. I can see cost estimate in cost report function of Sale Order and inform to customer. My question is "if I change the quantiy of component in ABC is 2 or 3 pc, the cost estimate will be change?"
If not? how i see the cost of order after change component in BOM.
Thanks allDear,
I have noy fully understood your question. What I understood is you have created Sales order and then you chnaged the BOM qty of sales order BOM. Will it chnage the cost estimation?
It depends. If you have chnaged the BOM after sales order is created, if you go for recost run, it may change. and you may get the correct cost.
Are you looking for this?
Raj -
US localization. Select 2 Sales orders in one down payment invoice
US Localization.
I need to create a Sales Down payemnt invoice selecting 2 sales order but is not possibile to select more than one SO.
In Other localization I see that it is possible.
There is some set up or on the US localization it is not possible?
ThanksHi,
Is it was happening for one customer or all? Please check SAP note:
1649125 - LOC_US/CA_Impossible to base a foreign currency down
payment on multiple orders
1766588 - LOC_US_CA_System Exchange rate cannot be used in A/R
Downpayment Invoice
Thanks & Regards,
Nagarajan -
Partner selection at sales order entry: ship-to's flagged for deletion
Hi All,
I need some inputs for the following issue.
For Partner selection at sales order entry level: ship-to's flagged for deletion are also proposed as it is entered in customer master. I dont want to delete the ship-to's marked for deletion in the customer master.
In short - only the ship-to's that are not marked for deletion should get populated.
Kindly suggest if there is an userexit for the same.
Regards
KCBHi,
You can try Blocking option for the particular Ship to Party.
But this will not disable it appearing in the Partner Function Selection Pop up.
Once you block it; though it appear in the selection pop up, you cannot select & proceed, as it gives a error message.
You can set this block in 2 ways.
1 - Tx: XD05
Go to the Tx give the customer number, sales area & Pres enter.
There you can set different type of blocks depend on your scenario.
Save
2 - Tx: XD02
Go to TX, Give the Customer number (Ship to Party) & go in. Since you have marked him as a delete, you'll get a warning message there too.
Select Menu option -> Extras -> Blocking Data
You'll coime to the same screen as above.
Maintain relevant blocks & Save
Check whether it satisfy your requirement.
Best regards,
Anupa -
Bom explosion in sales order mrp(MD50)
Hi Experts,
In sales order MRP i.e. MD50 Getting the planned orders for header material(Finished goods) generated but for raw materials (BOM items) Purchase requisitions are not getting generated.
Details:
Header material A and raw materials B and C.
In material B in MRP 4 coll/ind indicator is 2 And same indicator for C is blank.
Now when we are running the MRP sales order based it will generate the purchase requisition for C only but not for B.
In OPPQ we have done the setting for sales order BOM explosion.
Can anyone please throw some light what is the setting missing in customization or in front end?
Thanks in advance.
Regards
VilasDear,
If you select individual requirement then system will not consider available stock and generate Proposals for every single requirments. Check in MRP4 view Individual / Collective .
Also you will find PR and Plan order with account assignment of Sales order (in case of MD50).
- If you select collective requirement then system will not generate planing proposals through MD50.In that case you have to go for individual MRP (MD02 / MD03)
Please try and come back.
Regards,
R.Brahmankar -
Alternate BOM Text from sales order
Hi ,In My report I need alternate BOM Text.
The scenatrio is : when we create Sales order it will ask for Alternate BOM ( 1 or 2 or 3 ).
Based on selection it will assign the BOM and Sales order will be saved.
I want how to link the sales order doc no with Alternate BOM.
I have tried so many tables : MAST,VBAP,VBAP.STPO,STKO,STAS etc but not getting the Link.
Can anybody suggest me ?
Thanks
KumarHello Kumar ,
you need to Link VBAP-STLNR -->STPO-STLNR.
regards
Prabhu -
CRM contract - BOM refer to Sales Order
I have a contract created in crm for a material MATSub1 for a Customer CUST1
As per my configurrations, whenever i try to create a sales order for MATsub1 for CUST1, then its contract (Created earlier) is popped up and is linked with sales order.
Now, Lets assume that there's Sales Bom created in system with Main Material as MATHEAD1 and its subitems as MATSUB1 MATSUB2.
Thus, whenever a sales order for MATHEAD1 is created the bom is exploded as per expectation.
Now the scenario requirement is that if a contract exists for any subitem material e.g. MATSUB1, and a sales order is created for main material i.e. MATHEAD1 the bom should explode and bold contract for any subitem should be popped up (if exists earlier).bold
hope my query is clear. any info in this regard will be highly appreciated.
thanks.
Robert.You wil not be able to access one Form's values from another form but within the same form it would be possible.
Most fields or columns on the form are accessable using the
$[$Item.Column.Type] syntax
For your requirement, since the field is at the form level and not in the grid rows, the column part of the syntax would be 0.
The Form (139) does not get used in a formatted search.
SELECT $[$-29.0.Number]
the above will give you the DocTotal that you see at the very end of the form
SELECT $[$-22.0.Number]
wil give you the Total Before discount value
The - (minus sign) has been used because you are trying to assign this to a User Field which is not actuallypart of the main form but the one on the side. If you are assigning the formatted search to a field on the main form you will not need the minus sign
Regards
Suda -
Error retrieving BOM type from sales order line matrix
Hi All
I have a problem with an add-on which works in SBO version 2007 but now fails in version 8.8. The fault occurs when the code attempts to retrieve the BOM type from the sales order line matix as follows:
objCombo = mtxOrder.Columns.Item("39").Cells.Item(intCount).Specific
strBomType = objCombo.Selected.Value
Where mtxOrder represents the sales order line marix extracted from form type 139
Under version 8.8 this code generates an error "unable to cast COM object ... to interface type SAPbouiCOM.ComboBox ....". If the code is replaced by the following, the error does not occur.
objEditBox = mtxOrder.Columns.Item("39").Cells.Item(intCount).Specific
strBomType = objEditBox.Value
Any assistance or explanation would be greatly appreciated.
Thanks
DavidIt just looks to me like it was a combo box in the 2007 version and has been changed to just be an edit text in 8.8... from what you have explained anyways, that seems to be what is happening. Sometimes there are small changes like this - it's better to directly access the datasource so you can avoid being hit with these sort of changes
so for example
strBomType = oForm.Datasources.DbDataSources.Item("RDR1").GetValue(TreeType, i);
//where i is the linenumber-1 in the matrix -
Unable to enter multiple Schedule lines for BOM material in Sales Order
Hi All,
We have a Sales Order where in which we cannot add additional schedule lines for BOM material.
The schedule lines are greyed out, user was able to add schedule lines earlier.
I have checked all assignments in VOV6, VOV7 and everything seems to be fine and no changes have been made to item category being used.
Please provide a solution for this.
PFB link in which similar situation posted in this community but the final resolution method is not discussed.
http://scn.sap.com/message/13201504#13201504
Regards,
SamikshHi Samiksh,
Pls check for that particular customer, only complete delivery allowed(c) is set in the CMR or CMIR. If so, you can't enter multiple schedule lines for that customer.. it would be grayed out in the sales order schedule lines except confirmed line.
or check the problematic sales order at item level shipping tab if the par del/item is set to 'C'
With regards
S.Siva -
Configurable Material as BOM component in SALES Order BOM
Hi Gurus
I have following
1. Material ABC is a configurable material (variant)
2. BOM of this ABC has further configurable materials
Is it possible to maintain requried charasterstic of the compoents which are configurble at the time of SALES ORDER BOM CREATION.
If yes, how. please explain.
Thanks in advance
sunilDear Sunil,
Please refer to the following link:
http://sap-img.com/sap-sd/sales-bom-implementation.htm
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Do let me know in case of any queries.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh -
BOM explosion in sales order for configurable materials and variants
Hi,
I have these materials:
A: configurable material (header)
B: variant material (header)
C: configurable material 1 (position)
D: configurable material 2 (position)
E:variant material 1 (position)
F:variant material 2 (position)
I can in the sales order explode in this way the BOM (using SD01 application in the position type of the header material):
1) A --> C+D
2) B --> E+F
while I can't make the explosion in this way: A --> EF and A --> CE
is this possibile? I want to make an explosion of a BOM for a configurable material and having variants material as sons, or having mix sons (one configurable and one variant)
Thank you
SandraHi Sandara,
Just check the BOM in cs03 u have maintained !!! If u have maintain the variant material there in the config mat BOM with object dependencies than u can explode !!!!
Please let me knwo if u any query and also if u elabore more than will help u out -
BOM explosion in sales order in variant configuration?
Hi All,
After searching all threads iam posting this .
My requirement is
In sales order the material(ZDESKTOP) which has been created in KMAT with item caragery gruop 0002(Configuration) has compenents like PROCESSESOR,DRIVE,KEYBOARD,STORAGE,MEMORY,etc where again each components have 3 varieties(values).while creating sales order the components and picking of values is running well.THE GREEN LIGHT IS ON IN VARIANT CONDITIONS.pricing is picking for variant conditins(values)
These values are stockable items which i created as semifinished.
item catagery TAC is determined.
Now my problem is the values(sub-items) which are attracted pricing should reflect as sub items of ZDESKTOP.
I have created a BOM also for ZDESKTOP.
I HAVE GET ONLY THE PRICED VALUES AS SUB-ITEMS.
HOW TO DO THIS SCENARIO?
Need Help.
Regards,
Reddyy
Edited by: REDDYY SD on Feb 4, 2009 12:51 PMHi
check your Item category group in material master , sales org view, if it is 0002 Configuration this material use for varient configuration, but your case it may be LUMF (Structure/mat. below) it used for sub item price.
It is , one of the reason.
Regards
Paulraj.S -
BOM explosion in Sales order with material variants
Dear all,
we would like to work with Variant Matching in the Sales Order. Additionaly we would like to explode the BOM....according to the SAP help this is not possible....
http://help.sap.com/erp2005_ehp_06/helpdata/en/bd/05a7d69d3211d190380000e8a49aad/frameset.htm
Does anybody of you has any ideas how and where to make this happen?
Thanks for your help and kind regards
JanHi,
I have gonethrough the SAP link referred by you but never come across with any problem in type matching during Sales order even if the BOM explosion is set for Multilevel in Configuration Profile provided the other pre requisite set up was perfect.
Regards
Brahmaji D
Maybe you are looking for
-
ive tried uninstalling and reinstalling...i can watch videos on like windows media player...if anyone can help me i will be right here waiting to work with you...please!!
-
Can I use the Apple TV wirelessly?
I'm sorry if this is a stupid question. I don't have an Apple TV and am thinking of getting one. What I am wondering is, how can I use Apple TV if my TV is in the living room and my iMac is in the office? Would I hook up the Apple TV to the TV via
-
How to populate ADF Faces Drop Down without Errors?
Hi, I have a drop down in ADF Faces which gets populated when a value is selected in another drop down. And its mandatory that we need to select both the values from the drop down. Hence i have used the attribute 'required' and set it to 'true'. The
-
I'm at the end of my rope with this thing!!
Just a quick overview, I've had my 30G iPod for about 2 weeks now. At first I couldn't get iTunes to read the iPod and had all these other problems. Eventually, after trying all sorts of things, I would have to pull the cord out of the USB port becau
-
How to pass table to in a method as a parameter
Hi I need to pass one table in one method to another method as a parameter. ex: it_tab type zvalue(DDIC). send_mail( it_tab)like this i need to pass. How to do this. Please help me. Thanks & Regards SUN