BOM sloc mass change

Hi Friends
In the BOMs for the components we want to change storage location.
There are so may BOMS in the plant,
How can we change in mass.
Regards,
srihari.M

Hi,
First create Working area with focus as BOM Items in OP77.
Then CEWB select the area you have created and  give the list of material you want to change (in additional selection criteria) and execute. In material Planning Tab change the SLoc.
Also check the below link
[Changing the production storage location;
Regards
Vinod

Similar Messages

  • CEWB: BOM item Mass change new value Missing

    Hi Guru's
            When i plan to do BOM item lead time offset mass change in the (CEWB) Engineering Workbench,
    i have selected the ITem and Column LT offset, and in entra when i select the mass change, system showing a error.
    " no item selected", (new value and replace indicator is missing
    .Can u help whether we need to apply any notes ?
    Regards
    GS
    Edited by: GNANASEKARAN Suresh on Aug 1, 2011 4:40 AM
    Edited by: GNANASEKARAN Suresh on Aug 1, 2011 4:51 AM

    Upload screenshots of the step which you're taking in CEWB & the error you notice to some portal & paste the link here for a clear understanding.
    Also which version of SAP you're working on & what is the support pack level ? (If you're not sure about it, then check with your system admin for the same).

  • Material BOM mass change error

    Hi gurus,
    When doing mass change of BOM via tcode CS20, i'm getting below error result.
    The following messages were displayed:                                                                               
    Material BOM 00016478 : Delete Item(s)
       19760                                  STM-220-(20UP)78DZ*C06U029(XC06U029)Sn 200
       0130 L 01/01/2002 12/31/9999              1.00  PC     >               1.00  PC
       No batch input data for screen SAPLSDDT 0010
       Folder created/extended
    I wonder what does "No batch input data for screen SAPLSDDT 0010" mean? what should i do to correct this?
    I also noticed that all items on the picklist were grayed out though i can still click on the checkbox button to select the items that I want to be deleted.
    Has anyone encountered this problem? I usually use CS20 during BOM mass change and haven't encountered this kind of problem.
    Hope to hear advise from you all on how to deal with this.
    Thanks and regards,
    Chad

    Dear,
    Error message no is 00344 ?
    Please refer the OSS note  Note 493096 - CS20: No batch input data for screen SAPLCSDI and   Note 180686 - For CS20
    Regards,
    R.Brahmankar

  • Mass change in component Scrap % in BOM

    Hi Guru,
    Can someone explain me the process of mass change in component scrap % in BOM ? I have to make zero coponent scrap % in BOM for all materials.

    Dear Vikash,
    Check with t-code CEWB
    for this you need to define work area in OP77
    Regards
    Madhu

  • Mass change in bom

    dear experts
    how to add materials in mass change in BOM with CS20 or LSMW or BDC.
    regds
    prince

    HI
    Check  T code CS20 or thru workbench for CEWB you need to activate working area in OP77 select SAP_item .
    check this thread
    Mass changes for BOM Base Qty
    Regards
    Anupam Sharma

  • Mass change in BOM - field "Relevant to sales"

    Hi All,
    How to do Mass change in BOM for the field "Relevant to sales" ?
    Thanks.
    Marianna

    Hi,
    Need to use CS02 recording in such a way that you can change every item in a particular BOM.
    e.g. First get into HEader Material BOM (CS02), once you've General Item Overview screen, do NOT directly go to item details of any item.... first click on tab-'Position', enter either Item Number or Component or both and then go to item details to change the relevancy indicator. Once changed for a particular item, save the BOM & come out of it. Then try for next item & so on....
    Again this is my initial thought, you need to try out few recording options like this and then chose the most suitable one. Take help from ABAP expert if any available.
    Off-course, initiallly it would take time to set-up LSMW but later on just need to create a data-file & do the mass changes.
    Hope it will help.
    Regards,
    Anup

  • Mass change in collective BOM's

    Hello Experts,
    I want to change the quantity of a single material in several BOM's already created in the system, there are atlest 2000 BOM's having the same qty of that material which i want to change.
    I had a look to the MASS change option in the system but i was not able to resolve my problem.
    Please Help.
    Regards
    Prashant

    Hi,
    Please try transaction CS20.
    If resloved then let me know.
    Regards,
    Jigar

  • Can't quey by Bom mass change  No after implementing it.

    when running Bom mass change , i cant query by its number ..is that acceptable ??

    See KB Article:  http://support.apple.com/kb/HT1274 Changing or resetting an account password
    my current country does not have a apple store....
    AS are not the only places that repair Macs.  Check out the following:
    International AASP’s & Other Services
    AASP's Outside of the USA
    How to find your nearest Apple Authorized Service Provider (AASP)
    Also, there are User Groups that can possible help.

  • Item range in BOM mass change

    Does anyone know the criteria (item_id,creation_date,etc) by which Oracle interprets the Items from a given item range in BOM Mass change.

    Purely alpha-numeric.
    -Gerry

  • Mass changes in BOM

    Dear Experts....
                            I want to delets some items from all BOMs.Items are specially tools having a matrial type ERSA. How to delete same items from all BOMs.
    Rakesh

    Hi,
    You can carryout the Mass changes of BOM using the Tcode : MASS.
    Where you need to select the object type related to BOM and perform the mass change.
    It can be done through CS20 and CEWB also.
    Hopwe this will help you.
    regards
    radhak mk

  • Mass changes of BOM with ECM

    Hi
    I wanted to change into BOM by Cs20 Mass changes into BOM with ECR Number which is created throgh CC31 .
    but system is not allowing me to do the same , pl tell me where is GAP.
    Rgds
    Pankaj Agarwal
    Edited by: Csaba Szommer on Dec 28, 2011 10:43 PM

    Hi Mario
    For ECR i have done the same and even that is Released and also Status with ECO. but still System is showing the same.
    Mario one more thing i have written on SDN pl have a look on Followup material , i have read about your post MRP-MPN.
    we are also having the scenario of alternate Material Within the Bom and also wnat to be correct the Procurement Proposal.
    how it will be helpfull by the MPN-MRP Set function.  i am also searching the same thing into Follow up Material . pl have a look on that.
    yours reply will be highly appericiable...
    Rgds
    Pankaj Agarwal

  • Mass change of BOM item and BOM item catergory

    Hello Everyone,
    I have a need to complete a mass change of a BOM item with another, usually I use transaction CS20,this works o.k. but this time I'm also changing the material with a new item catergory, for example a stock item with a phantom item.
    Does anyone have an idea how to complete this task.
    Kind Regards
    Frankie

    Hello,
    Thankyou very much for your reply.
    I did try adding the new material using CS20 but all the BOM qty's are different and as you know you have to complete this field, so it would mean changing one at a time, I attacked this issue from a different angle and created an LSMW so I can Mass delete the parts but then use this program to change the BOM item to the new part.
    Thanks again for your reply
    Kind Regards
    Frankie

  • Mass change of Recipe with Change Number for Future

    Hi ,
    I would like to do a Mass change of Recipes with Change Number for Future Plan,
    is there any way I can do that? or Transaction where I can get that info as I have to do it for lot of recipes,
    Regards,
    Paartha

    Rajesha,
    MM12 will get the change Number From CC01, where we define the Change Number for various things Like Mat master, BOM, Document etc,But I would like to Provude the ECN number when ever I change for example MM12(Mat master), CS02(BOM),CA02(ROUTING),C201(RECIPE), every time I can enter the same ECN number obtained from CC01 create change Master,you can see ECN number field on C202 screen also,
    so Now I would like to change Recipes by giving this ECN number for Mass change of one Filed called LAbor Hours inside C201,
    is there any way I can do mass change instead(avoid) of Process ,,,,,,,,, go to  C201 -enter ECN number--go in side change Labor hours for each and every recipe .
    Hope you understood,,, Looking for Reply from you and SDN Gurus
    Regards
    Paartha

  • Service Desk - need IB52 iBase "partner assignment" mass change

    Dear Ladies and Gentlemen,
    We are using SAP Service Desk in Solution Manager 7.0 EhP-1.
    There are many satellite systems connected to SolMan using Service Desk.
    Of course all of them are setup in SMSY, have a valid iBase entry in IB52, and have the "sold-to-party" assigned in IB52 -> Goto -> Partner.
    Now we need to assign a new business partner as "sold-to-party" for all these systems.
    We do not want to rename the current business partner, but have to assign a new business partner to not influence existing tickets.
    Thus, manually we would need to go to IB52 and change the partner assignment in IB52 -> Goto -> Partner and enter a new value for all the systems.
    Q: is there a way to perform a mass change for the "sold-to-party" partner assignment of the iBase entries? Is it possible to update or replace all or multiple existing partner assignments in iBase?
    Many thanks,
    Peter

    Hi Christian,
    Can you please tell me how did you create iBase for NON-SAP Systems? I know it is IB51/IB52? I am not sure what do you do after that? For an example I went to IB51 and create iBase number 403? now I go to IB52 and put the 403 in the installed Base field and click on Green arrrow to go inside correct? what do I do after that? where is the options to create the iBase name call "Network Group" ?
    How did you solve your issue for not showing when you went to F4 in NOTIF_CREATE? was that authorization error? if yes, do you know the object name?
    any help is much much appreciated
    Thanks in Advance
    Kumar

  • Separate TCode for Mass Change of documents (For authorization purpose)

    Hi
    We have internal audit function where internal audit chief will remove the payment block of multiple vendor invoices through FBL1N --> Environment --> Mass Change.
    Now problem is that authorization for FBL1N is given to 6 more employees (related to AP Accounting). Hence all these employees can do the mass change. I want to restrict this mass change authorization only to one person i.e. internal audit chief.
    Please tell me how to bring this restriction.

    Hi:
          You should contact your basis guy to do so...In tab authorization first you will have to find this object he system will display it , there you can assign 03 in place of *. 
    Personally i will recommend you should go for creating transaction variant using SHD0 which is an easy way to do so. Please check it will solve your issue. I just did both in test sever both of them are working perfect for me. Mass button is disabled when you set 03 for F_BKPF_KOA. SHD0 meets the subject topic of your post.
    Regards

Maybe you are looking for