BOM Templete Field

Hi
For importing Bill of Material there are two templetes oProduct and oProductLines.
In oProduct templete i;ve mentioned the parent item name so is it necessary to write the name of
parent item in front of child items in oProductLines templete, as im writing the child item of a particular BOM in front of the record key.
Also i dont want to mention the price and want to use a single price list which is not known so what code to type in these two fields?
Thanks

No. You don't need Parent item code in the line file.  You only need Record Key which is equivalent to parent item code in the ProductTree header file.
You don't need to put in any price.  Use Price List number is enough.  If you omit them all, you will get the lowest price list number.
Thanks,
Gordon

Similar Messages

  • Equipment BOM quantity field as optional

    Hi Expert,
    Does anyone know how to set quantity field as optional in Equipment BOM transaction (IB01)
    Pls help. Thank you
    Rgds,

    Leni,
      The field selection for the quantity field is dependent on the item category,Transaction type, etc  of the BOM.The field selection attributes are fixed in tables TCS33. I don't think you can change this through config. However if you are in ECC 6.0 you could consider tweaking the resultant field selection attributes through implicit enhancements on the screen flow logic.
      However why would you want an item without quantity?
    Regards
    Narasimhan

  • For LUMF - BOM, Plant field in Sales Order should be editable for TAP

    Dear Gurus,
    I have the following requirement.
    Requirement...
    TheComponent level BOM (LUMF) should be exploded in sales order with one by default plant when iI enter the main component in Sales order but if I want to change the plant of main item manually system should allow me in order change mode. And this changed plant to be determined automatically for all the components of that BOM.
    As we know if we maintain the BOM at component level we will use the Itm Catg Grp "LUMF" so the pricing will be determined on the component level.
    In CS01 we maintain the BOM for a main item. I have followed the same process in CS01 by entering Main Item material, Plant and BOM usage (5). whenever i enter the main item in sales order it explodes correctly with components, quantity and Plant.
    The Plant field for main item (TAP itm Catg) becomes gray. But now my query is that if I want to change the plant of main item system is not allowing me as I have  created BOM for a specific Plant. Same Bom I have maintained with other plants also
    I know that We have one more option in CS01 like we can create a BOM without entering Plant also. But before I doing it for trial and error I want to know whether it will work for my latest requirement.
    And what is the Group BOM ? how to use it? will it be helpful me in this requirement?
    Please help me for the issue, I need to configure it as soon as possible.
    regards,
    Vojas

    Dear Kapil,
    Thanks for your suggestion i followed it also but yet I am facing the same problem.
    I did as follows
    I extended the Main item and components to the different plants.
    And also created the same BOM for different plants in CS01.
    After doing this if I create a Sales order and enter the Main Item with quantity system asks me for the Plant to explore the BOM, as i enter a plant BOM get explodes and the plant for main item becomes gray which i dont want. Any how I want the this plant field for main item in editable mode.
    Let me explain my requirement in short
    I maintain the LUMF BOM (Pricing at component level) .
    once I enter the BOM material with quantity system should explode the bom with one plant by default. and in change mode of sales order the Plant for main item should be editable instead of gray mode. Becoz decision can be changed later on the delivering plant location.
    Please suggest me. Its a high priority issue for me.
    regards,
    Vojas

  • BOM Sortstring field

    Hi All PP Gurus,
    Can you please help me in the following issue.
    Its very urgent please help me in this case.
    On the BOM master, we put the sorting string on the sortstring field. assume we put all the bom components into the same phase,but the process instruction material sequence was not same as the BOM sortstring. Could you please advise me in what way we can let the process instruction material sequence was same as BOM sortstring sequence ?

    In my opinion BOM sort string is used for just identification in making any reports. You need not keep in sequence or order.  As per the requirement you can do componenet allocation of the BOM components.   If you want you can use same material several line items also.  If you have any specific dificulty let me know.
    Regards,
    KrishnamurthyDSS

  • BOM Header field - regd

    Hello All,
    we are making one report for that we need to capture the Bill of Material number of the component attached to the activity.
    There is BOM with x,y,z components assembly name is "ABC", the "ABC" is transfered to project using CN33, all the components are attached to a activity in network.
    Now we can see the assemly number of the components in CJ20N , select the activity, go in detail view, select component overview, scroll to wards right we can find the "Assembly" column and the "ABC" is shown there.
    No we have checked the table it is RESB, field BAUGR ,
    the problem is.. in the table it is not showing the "ABC" number. and it is not showing any thing.
    How this table will get populated ?
    Is there any other method to fetch the assembly number from the table.
    Thanks,
    karthik
    Edited by: SG_Karthik on Aug 11, 2010 12:46 PM

    Hi,
    Fetch STLNR and STLAL from RESB, go to MAST table pass these values and get MATNR. You will get the material number of the assembly. Hope it helps.
    Regards,
    Arul.

  • BOM  usage field in BOM Copy

    Gurus,
    Am creating production (usage 1) BOM by copy from engineering (usage 2) BOM alternative 1. Once the first alternative production BOM has been created, is it possible to create the second alternative of this production BOM by copy of the engineering BOM ?
    In CS01, once the first alternative of a BOM usage exists, (for instance production) the system only lets you create the following alternatives of the production BOM usage by copy of production BOMs. Engineering BOMs cannot be refered to anymore as field BOM usage is deactivated (and value "1" corresponding to production bom usage is set), only alternative field can be populated, in "Copy From..." screen.
    What is the functional reason for the standard R3 to be like this ? Are there any work around ?
    Thanks for answers,
    Olivier

    Dear Olivier,
    is it possible to create the second alternative of this production BOM by copy of the engineering BOM
    in my understanding Copying  Alt 2 is not possible
    i exactly don't know the functional reson behind this
    May be experts can throw some light on this
    Regards
    Madhu

  • BOM - LSMW Field for Item Id.

    Hi Friends,
    I am trying to create material BOMs using LSMW direct input method using program RCSBI010. I want to update Item ID.(Externa ID) to avoid duplicate item no.(POSNR).Which field of srtucture BICSP shuld I use for this purpose?
    Thank and regards
    Harish

    If the requirement is to have unique nos. in Item ID field in BOM, then just upload with data in the LSMW w/o specifying any Item ID, system will auto populate the field with unique nos., as mentioned in my earlier posting.
    But if the requirement is to manually specify the Item ID in the upload field, then the method you have adopted does not help. You might want to consider writing a Z program by calling the FM - CSAP_MAT_BOM_CREATE or in LSMW using the same FM.
    If you're not the technical person, then get in touch with your abaper who will do the needful.

  • Only display BOM expand field in MIGO

    Dear Expert,
    I want to only display BOM component in MIGO so that people in the warehouse cannot simply change the BOM component when they received the subcon item.
    How to do this restriction?
    can we do this based on user authorization? means this setting only for selected user.
    please advice...
    Thanks
    Pauline Kurniawan

    Hi there.....
    There are teo optios where I THINK we can address your problem....
    1)OMJX---fied status ....just check whether GOITEM_ERFMG  can be made to be displayed only
    2) Try SHD0.....
                                  Give a new transaction variant to MIGO,maintain proper parameters i.e field to be displayed only.
                                  I tried once doing so ......but was not able to do it.
                                  I think so on screen 200,there is a field for quantity

  • How to increase the BOM Alternate field in CS01

    Hi,
    We are interfacing between SAP and third party PLM software (Innovator) to bring the BoM date for CS01 transaction. the third party PLM is having 3 digit version, whereas IN CS01 the BoM alternate takes only 2 digit . kindly suggest the best solution to map the date to CS01 requirement (the RFC are working fine and we are uploading thrrough BDC)
    regards,
    paveetra

    Dear
    "Alternative selection for multiple BOMs"
    (Transaction OS32).
    select the bom Application and check all the box like mrp elxp rel for costing
    with regards
    pushpala

  • Error while creating Production order without BOM

    Hi Guys,
    While creating production order without a BOM i am getting the following error in the error log.
    Error: BOM for material xxxxxx does not contain any valid items
    Message no. CO636
    Kindly help.
    Regards,
    Sid

    Dear customer,
    could you check in the master data screen of the order if one BOM has been selected?
    please coudl you check your customizing the following transactions:
    OPJM
    OPJI
    what do you have in 'BOM slection field' MRP4 view of the header material?
    Please check if with this info you can find the missing data to explode the BOM
    regards
    Maria

  • How to add a field in the layout of cs11

    Hi,
    i want to add a field in the layout of cs11,
    i tryed with user exits and badis as below but i am unable to find the solution .
    BOM_EXIT
    BOM_UPDATE
    CEWB_BOM_CUS_FIELDS (SCREEN ENHANCEMENT WITH BOM HEADER)
    CEWB_BOM_UPDATE
    CEWB_ITM_CUS_FIELDS (SCREEN ENHANCEMENT WITH BOM ITEM)
    PCSD0001 Applications development R/3 BOMS
    PCSD0002 BOMs: Customer fields in item
    PCSD0003 BOMs: Customer fields in header
    PCSD0004 BOM comparison
    PCSD0005 BOMs: component check for material items
    PCSD0006 Mass changes user exit
    PCSD0007 Check changes in STKO
    PCSD0008 WBS BOM: Customer-specific explosion for creating
    PCSD0009 Order/WBS BOM, determine URL page
    PCSD0010 Order/WBS BOM, determine explosion date
    PCSD0011 Knowledge-based order BOM, parallel update
    PCSD0012 Customer - Mat. number/mat. number during material exchange
    PCSD0013 Customer-specific processing of an explosion for BOM browser
    Thanks,
    ksbabu

    Hi,
    Please see documentation of enhancement MM06E005 (transaction SMOD).          
    Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.            
    With that enhancement, you can                                                
      -   Maintain/supply your own customer fields                                
      -   Update your own customer-specific tables                                
    You cannot:                                                                   
      -   Change standard fields                                                  
      -   Change data that depends on the document header in the items            
      -   Change data that depends on an item in the document header                                                                               
    Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.              
    Regards,
    Edit

  • Check on BOM change

    Hi Gurus,
    Please tell me if there is any BADI or user exit to check if any changes made in BOM by CS02.
    The purpose is to trigger mails if there is any change in a BOM.
    Regards,
    Soumyatabha

    Hi,
    The User Exit: PCSD0007 (Check changes in STKO) may be of your interest..
    These are the User Exits available for BOM.
    PCSD0001  Applications development R/3 BOMS                          
    PCSD0002  BOMs: Customer fields in item                              
    PCSD0003  BOMs: Customer fields in header                            
    PCSD0004  BOM comparison                                             
    PCSD0005  BOMs: component check for material items                   
    PCSD0006  Mass changes user exit                                     
    PCSD0007  Check changes in STKO                                      
    PCSD0008  WBS BOM: Customer-specific explosion for creating          
    PCSD0009  Order/WBS BOM, determine URL page                          
    PCSD0010  Order/WBS BOM, determine explosion date                    
    PCSD0011  Knowledge-based order BOM, parallel update                 
    PCSD0012  Customer - Mat. number/mat. number during material exchange
    PCSD0013  Customer-specific processing of an explosion for BOM browser
    PCSD0014  Knowledge-Based Order BOM: Status                          
    Hope this helps..
    Regards,
    Siva

  • Adobe Acrobat as a server to create PDF using PDF templates and field values

    I'm writing a web page to create a PDF using fields that we ask for them in the screen.
    My idea is:
    1. Ask for field values (text values and a photo) in my web
    2. Run Adobe Acrobat to load a PDF template (PDF form) and mix with the field values
    3. Create a final PDF mixing values and template
    4. Show to document to the user in his client web browser. I guess the only way to do that is to create the PDF on a server with Adobe Acrobat Pro and send to the user browser a JPEG that will represent the  PDF: If I do this operation in the PDF visor at the client browser, the problem is that it will will be mandatory to install Adobe Acrobat in each cliente because only this visor can manage javascript.
    Can you tell me if this idea is correct? It is possible to use Adobe Acrobat on a Server to create PDF when some proccess needs?

    and what other Adobe product o procedure can we use to do that?
    I only need to create a PDF mixing PDF Templete, field values and javascript.
    Thanks for your help.

  • How to created exit for CS02 transaction to maintain bom details of a mater

    hi ,
         plz explain how to created exit for CS02 transaction to maintain BOM details of a material. what is the BOM component . give me sample example.

    Hi,
    these are the user-exits for CS02
    Transaction Code - CS02                     Change Material BOM
    Exit Name           Description
    PCSD0001            Applications development R/3 BOMS
    PCSD0002            BOMs: Customer fields in item
    PCSD0003            BOMs: Customer fields in header
    PCSD0004            BOM comparison
    PCSD0005            BOMs: component check for material items
    PCSD0006            Mass changes user exit
    PCSD0007            Check changes in STKO
    PCSD0008            WBS BOM: Customer-specific explosion for creating
    PCSD0009            Order/WBS BOM, determine URL page
    PCSD0010            Order/WBS BOM, determine explosion date
    PCSD0011            Knowledge-based order BOM, parallel update
    PCSD0012            Customer - Mat. number/mat. number during material exchange
    PCSD0013            Customer-specific processing of an explosion for BOM browser
    Regards
    Nilesh

  • Custom Field using screen exits CS01/CS02/CS03

    Dear Experts,
    I am using Screen exits to add some text description in CS01/CS02/CS03, my requirement is to add a field 'Product Appearance' with multiple lines for the material description. For this I have created customer field 'ZTEXT1' and appended it to STKO table. Now in screen painter(SE51) i need to add 3-4 lines of type stko-ztext1 because the product desc is of size 300-400 character.
    I am not able to create 3-4 lines of type stko-ztext1. Can u plz suggest how can i add 3-4 lines of  type stko-ztext1 in SE51.
    I am able to create a blank field in SE51 using Edit->Grouping->Step Loop->Define,  but while activating it is giving error as "Input/Outpt field STKO-ZTEXT1 and key word are not in the same screen".
    Plz suggest.
    Regards

    Hi Kurtt,
    Below are the available user exits :-
    PCSD0001  Applications development R/3 BOMS
    PCSD0002  BOMs: Customer fields in item
    PCSD0003  BOMs: Customer fields in header
    PCSD0004  BOM comparison
    PCSD0005  BOMs: component check for material items
    PCSD0006  Mass changes user exit
    PCSD0007  Check changes in STKO
    PCSD0008  WBS BOM: Customer-specific explosion for creating
    PCSD0009  Order/WBS BOM, determine URL page
    PCSD0010  Order/WBS BOM, determine explosion date
    PCSD0011  Knowledge-based order BOM, parallel update
    PCSD0012  Customer - Mat. number/mat. number during material exchange
    PCSD0013  Customer-specific processing of an explosion for BOM browser
    PCSD0014  Knowledge-based order BOM: Status
    Check which one suits your requirement.
    Regards
    Abhii

Maybe you are looking for

  • Unable to drop or truncate a plan table

    Hi guys, I was trying to execute 'Explain Plan' on one of my query. However, when I tried to drop the plan table, i was prompted that the table or view does not exists: QL> EXPLAIN PLAN FOR 2 SELECT * FROM ORDERS WHERE TO_CHAR(O_SHIP_DATE, 'YYYY')='2

  • Reg: material cash discounts

    hello friends, I understand that cash discounts taken from vendors will do settings in OBXU, OBB8. for MIGO cash discounts where we do the cash discount configuration, is that in OBYC, if so let me know the transaction we use for that. i knew that fo

  • Save Parent window

    Hi,           I had question regarding parent and child window. If i create many child windows in a single parent window, is it possible to save the parent windows and load the same again? I don't need the values of particular control or a indicator

  • Track P_ABAP_GUI70

    Hi All: I am persuading for certification of track P_ABAP_GUI70 and would appreciate you all for helping me out in the preparation of the following topics with Study Materials as 1. Customer Enhancements - BC427 2. Business Server Page - NET200 3. SA

  • Restrict administrator from viewing "out of the box" reports

    I want to create an administrator who will be restricted to viewing a single report (a new dashboard report). Is there anyway to "turn off" the administrators ability to see all of the out-of-the-box reports that are created / owned by sysman? For ex