BOM user exit

Hello,
I am junior abaper,.....I would like to ask you one issue regarding free good issue in SD.
I writen some code in user exit MV45AFZZ and MV45AFZB. to get the issue given below.
If I creat sales order with one material DP-HEADER(material name)...actually it should create with another material DP-HEADER1 this is another material match with the first one.....and both the total combination of quantity must be 6. and free goods are DPITEM, DPITEM1, DPITEM2...these material must come as 6, 6, 6 by default....here the problem is .......with my code implemented in MV45AZZ and MV45AFZB
the order creates like this.........if i creates order with 2 material quantity.....it creates
DP-HEADER   with 2 QTY
DP-ITEM         with 12
DP-TIEM2       with 12
DP-ITEM3       with 12
DP-HEADER1  with 2
If i create with 3 materila QTY
DP-HEADER   with 3 QTY
DP-ITEM         with 18
DP-TIEM2       with 18
DP-ITEM3       with 18
DP-HEADER1  with 3
I need it like this with 2 material qty
DP-HEADER   with 2 QTY
DP-ITEM         with 6
DP-TIEM2       with 6
DP-ITEM3       with 6
DP-HEADER1  with 4
with 3 materila qty
DP-HEADER   with 3 QTY
DP-ITEM         with 6
DP-TIEM2       with 6
DP-ITEM3       with 6
DP-HEADER1  with 3
my code is given below can you please correct it or give me some ideas.............
CODE IN MV45AFZZ
RM19852 - BOM & Mix match free goods concept
02/27/2007
tables : stas, stpo.
data : Begin of it_fg_xvbap occurs 0.
include structure xvbap.
data : End of it_fg_xvbap.
data: begin of it_zfreegoods occurs 0.
include structure zfreegoods.
data: End of it_zfreegoods.
data: v_lines(3) type c,
v_stas(3) type c.
data: begin of it_fg_stas occurs 0.
include structure stas.
data: end of it_fg_stas.
data: Begin of it_fg_stpo occurs 0.
include structure stpo.
data: End of it_fg_stpo.
data: v_mitem1_qty like vbap-kwmeng,
v_mitem2_qty like vbap-kwmeng,
v_mixitem_qty like vbap-kwmeng.
it_fg_xvbap[] = xvbap[].
if not it_fg_xvbap[] is initial.
read table it_fg_xvbap index 1.
select * from zfreegoods into table it_zfreegoods
for all entries in it_fg_xvbap
where matnr eq it_fg_xvbap-matnr
and zpromotype eq '04'.
Check if the BOM is completely exploded for mix-match.
if not it_zfreegoods[] is initial.
loop at it_fg_xvbap.
read table it_zfreegoods with key matnr = it_fg_xvbap-matnr.
if sy-subrc eq 0.
v_mitem1_qty = it_fg_xvbap-kwmeng.
clear v_lines.
continue.
endif.
v_lines = v_lines + 1.
if it_zfreegoods-zfreemodel eq it_fg_xvbap-matnr.
v_mitem2_qty = it_fg_xvbap-kwmeng.
v_mixitem_qty = v_mitem1_qty + v_mitem2_qty.
if v_mixitem_qty ne it_zfreegoods-quantity.
if fcode eq 'SICH'.
message e020(zsnd) with it_zfreegoods-quantity .
else.
message s020(zsnd) with it_zfreegoods-quantity .
endif.
endif.
endif.
endloop.
endif. " it_zfreegoods table
select * from stas into table it_fg_stas
where stlnr = it_fg_xvbap-stlnr
and stlal = vbak-qmnum.
if not it_fg_stas[] is initial.
describe table it_fg_stas lines v_stas.
endif.
if v_stas eq v_lines. " chk complete bom exlp
if sy-subrc eq 0.
move cstmat-stlal to vbak-QMNUM.
case it_zfreegoods-zpromotype.
when 'MIX-MATCH'.
loop at it_fg_xvbap.
endloop.
when others.
endcase.
endif.
endif. " chk complete bom exlp
endif.
End RM19852
endform.
CODE In MV45AFZB
RM19852 - BOM & Mix match free goods concept
02/19/2007
data : Begin of it_fg_xvbap occurs 0.
include structure xvbap.
data : End of it_fg_xvbap.
tables : cstmat, zfreegoods.
data: begin of it_zfreegoods occurs 0.
include structure zfreegoods.
data: End of it_zfreegoods.
if vbak-qmnum ne cstmat-stlal.
it_fg_xvbap[] = xvbap[].
if not it_fg_xvbap[] is initial.
read table it_fg_xvbap index 1.
select * from zfreegoods into table it_zfreegoods
for all entries in it_fg_xvbap
where matnr eq it_fg_xvbap-matnr.
if sy-subrc eq 0.
move cstmat-stlal to vbak-QMNUM.
loop at it_fg_xvbap.
if it_fg_xvbap-stlal eq space.
move cstmat-stlal to it_fg_xvbap-stlal.
modify it_fg_xvbap index sy-tabix transporting stlal.
endif.
read table it_zfreegoods with key matnr = it_fg_xvbap-matnr.
if sy-subrc eq 0 .
update zfreegoods set zpromotype = cstmat-stlal
where matnr = it_fg_xvbap-matnr.
endif.
endloop.
xvbap[] = it_fg_xvbap[].
endif.
endif.
endif.
End RM19852 *******
Thanks in advance,
MADHU....

Use workflow to trigger your stuff on the event of saving the BOM.
You will need somebody who is familiar with workflow to help you with this. Do you have someone functional for this ?
Kind regards
Colin

Similar Messages

  • Sales BOMs - User Exits

    Are there any user-exits available for Sales BOMs to control the explosion of the BOM in certain Document Types?
    I only want the BOM to explode for a specific order type.
    Is this possible?

    Dear Tom,
    When we create any material for BOM-usage, we maintain "Item cat. Grp" as LUMF (T. Code: MM01/02 --> Tab: Sales: Sales Org.2)
    Then, we create Material BOM in T. Code: CS01.
    Now, when you use the Material-Code, created in MM01 as BOM-Material (i.e. Item cat. grp is LUMF), in sales order system throws error:
    No item category available (Table T184 OR LUMF  )
        Message no. V1320
    Diagnosis
        No item category could be determined for the combination OR LUMF  .
    System Response
        The system does not allow further processing of this item.
    Procedure
        Check the entries in table T184 by means of which item category
        determination is controlled.
        If you do not have the authorization to do this yourself, contact your
        system administrator.ZQT LUMF )
    That means:
    Maintain an entry in T. Code: VOV4
    for the combination:
    Sales Doc. Type + Item Cat. Grp + Item Usage + ItemCat-HgLvItm
    I.e. Sales Document Types, maintained for Item Cat. Grp - LUMF, are allowed for BOM-explosion.
    Best Regards,
    Amit

  • User exit for BOM

    hello,....
    problem: using BOM in VA01...for free goods material.....
    I am working on user exit for BOM...I need to write a code in FV45SFCO_CONFIGURATION_SET_STM under this we have call customer funcion '003'
    if we click on this we will enter in include ZXVVAU12.....In this including I need to write the code(user exit) by using XSTB table and the values in that table I have to populate in XVBAP.......for the BOM Explosion........when we use VA01......
    so please tell me how can i write the code in that exit ...by getting the data from XSTB to XVBAP........by using the field STLAL (It is Alternative BOM in BOM Screen)...for example if I select '05' (stlal) BOM type.....the values in XSTB populate in XVBAP...
    anyone help me on this........
    Otherwise give me any other sample code for the userexit BOM so that I will learn...a lot from that....
    Thanks in advance,
    Madhu

    Hi Madhu,
    You can try something like this to read XSTB in user exits EXIT_SAPFV45S_003.
    DATA: XT_XSTB LIKE STANDARD TABLE OF SDSTPOX WITH HEADER LINE.
    FIELD-SYMBOLS: <XSTB> TYPE TABLE.
    DATA: FIELD_NAME(30) VALUE '(SAPFV45S)XSTB[]'.
    ASSIGN (FIELD_NAME) TO <XSTB>.
    XT_XSTB[] = <XSTB>.
    READ TABLE XT_XSTB WITH KEY STLAL = '05'.
    IF SY-SUBRC = 0.
    ....                      <--- your logic to move to VBAP
    ENDIF.
    Regards,
    Ferry Lianto

  • User Exit or BADI for Material,BOM,Customer,Vendor

    Dear All,
    I have requirement where if User A changes a Material X .It should go for approval by workflow.
    When the Material X is waiting for approval no other User should be able to change the material .It should give him a message
    and restrict him from changing the Material.
    Is there any User Exit or BADI to restrict him from changing the material. The exit or BADI should be called as soon as the Material is entered in MM02.
    I need exit or BADI for BOM, Vendor and Customer also.
    Thank you.

    Hi,
    You can go to Transaction SE80 and check in Function Group MATF. There have been two User Exits which are called during MM02 Transaction execution (via Analysis Transaction SE30) - MATERIAL_FIELD_SELECTION_NEW and MATERIAL_FIELD_SELECTION_COMB.
    BAdI called by FM MATERIAL_FIELD_SELECTION_NEW.
    Thanks and Regards,
    Prabhakar Dharmala

  • User exit to check the component in BOM

    Hi
    I am performing BOM change in SAP using change number.
    and this change number is maintained in the ztable with parent / child and required change details.
    When perform BOM Change using CS02, i need to compare this table and trigger error message.
    I mean if somebody is uing change number against a wrong material other than the material mentioned in the ztable.
    I want to trigger the error message
    can u pls tell me the appropriate user exit to use
    Regards
    DM

    Hi,
    I did a implementation on BADI : BOM_UPDATE.
    Here change number is available in DELTA_STPOB. But the problem is this badi is only triggered when save is pressed, so when a trigger an error message entire screen gets freezed.

  • Is there a user exit to restrict BOM change and display using material type?

    Hi Gurus,
    There’s a need to limit access to BOMs on a per material type however the client does not want to use the functionality of "BOM Authorization Group" in BOM header details.
    Do we have a user exit that can satisfy the said requirement?
    Thanks,
    Mae

    Hi
    Restriction to Changes of BOM will have better control using authorization object .Go to PFCG with your basis guy and try to explore the objects
    You can use C_AENR_BGR object to restrict.
    Otherwise , try apply BADI BOM_UPDATE
    Regards
    JH

  • BADI/User exit for a BOM

    Hi ,
      My requirement is that while saving a BOM , checking the BOM usage and category I need to set the Base order quantity value to 1. I checked the user exit,
    PCSD0007 and found that it had no exporting parameter to change the base quantity. I also checked the BADI BOM_UPDATE and method Change_at_save but it also does not have any changing parameter to change the quantity. Please let me know how this can be accomplished.
    Regards,
    Prabaharan.G

    Problem solved using available exit

  • User Exit Mv45afZZ for Promotional BOM

    Hi All,
    I am adding custom code to the user exit MV45AFZZ for Promotional BOM. The aim is to add a new entry in the Line tiems details with the BOM header data.
    Say if the initial order is  like this:                                       It should like this after user exit execution:
    Material         Quantity            Itm Ctg                                          Material         Quantity            Itm Ctg
      M1                   10                  X                                                   M3                   1                    Z
      M1                   10                  X                                                   M1                   10                  X
                                                                                    M2                   10                  X
    We assume that in the configuration, we have configured so, such that, BOM Item M3 comprises of Items (M2, M1) with 10 Qty each.
    For this purpose, we are adding a new row to the XVBAP table at runtime. But, when we post the order, finally the quantity field for item M3 is automatically getting changed to 10.
    Please help and revert back. Let me know if i have to clarify more on my doubt.
    Thanks
    Debabrata

    Hi,
    The userexit save_document_prepare will directly hit the tables like vbak and vbap. So, as i can see that you would like to change at the pricing conditions so it is better to user the user exit:userexit_pricing_prepare_tkomk...
    All the pricing conditions will be stored in the tkomp and tkomk tables.
    The changes can be happnd at this level also.
    Thanks
    rohith

  • User exit/ badi needed for planned order create/change,collective ATP check

    Dear All,
    I'm looking for a user exit/ badi which can be used for planned orders at the stage of
    mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
    I need after collective availability check to perform the following:
    1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
    then
    2) to start a scheduling.
    Very appreciate your help.
    Best Regards,
    Andrey
    Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
    Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PM

    Dear,
    Use the BAPI : BAPI_PLANNEDORDER_CHANGE
    Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
    and the transaction MDAC Execute action for planned order
    This function module includes the following actions:
    Explode BOM
    Explode BOM, check availability
    Check availability, only explode BOM in the case of a requirement
    Check availability, do not explode BOM
    Reset availability
    Change planned order data
    Schedule planned order
    Delete planned order
    Assign the key for the respective action control to the materials in the material master (MRP 4 view).
    Please refer this thread,
    Re: MDVP for collective orders
    Regards,
    R.Brahmankar

  • User Exit for Changing Quantity in Process Order , COR1, COR2

    Hi All,
    Can anyone point me towards the light in User exit related to COR1 and COR2.After the Creation of Process order  while saving i need to write a code that rounds off the quantity values.
    I tried to change the values in the below user exits but i was not succesfull.
    CCOWB001            Customer exit for modifying menu entries
    COIB0001            Customer Exit for As-Built Assignment Tool
    COZF0001            Change purchase req. for externally processed operation
    COZF0002            Change purchase req. for externally procured component
    PPCO0001            Application development: PP orders
    PPCO0002            Check exit for setting delete mark / deletion indicator
    PPCO0003            Check exit for order changes from sales order
    PPCO0004            Sort and processing exit: Mass processing orders
    PPCO0005            Storage location/backflushing when order is created
    PPCO0006            Enhancement to specify defaults for fields in order header
    PPCO0007            Exit when saving production order
    PPCO0008            Enhancement in the adding and changing of components
    PPCO0009            Enhancement in goods movements for prod. process order
    PPCO0010            Enhancement in make-to-order production - Unit of measure
    PPCO0012            Production Order: Display/Change Order Header Data
    PPCO0013            Change priorities of selection crit. for batch determination
    PPCO0015            Additional check for document links from BOMs
    PPCO0016            Additional check for document links from master data
    PPCO0017            Additional check for online processing of document links
    PPCO0018            Check for changes to production order header
    PPCO0019            Checks for changes to order operations
    PPCO0021            Release Control for Automatic Batch Determination
    PPCO0022            Determination of Production Memo
    PPCO0023            Checks Changes to Order Components
    STATTEXT            Modification exit for formatting status text lines
    Reason was the data related tp materials was not accesble at this point and residing in resb internal table .
    Any suggestions ? Ideas  ?
    Thanks in advance,
    Gowri

    Hi,
      Try with BADI <b>WORKORDER_UPDATE</b>.
    Regards

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • Availability check run requirement in the Sales order Save user Exit.

    Hi Gurus,
    As per the requirment we are using a user exit SAVE SALE ORDER PREPARE for BOM purpose to reconfirm the confirmation qty.
    Now we need to add one more logic in the same user exit, which will run the availabilty check run for each of the line items of the BOM and consider latest confirmation qty from it. So my concern is it possible that we can call the availabilty check run event with in the user exit SAVE SALE ORDER PREPARE or this not advisable?
    Please let me know..
      Regards,
      Babs

    HI Venkat,
    Thanks for your reply.Yes you are right availability check runs automatically at sub item level.
    But please note the customer requirment iteself is is little different from std BOM configuration.
    Currently the availabilty check is activated both at header and sub item level. They are maintaining the stock for header and sub item level.Also the these sub items are some time being sold as invidual materials. hence there exist a mismatch in the stock value between header and sub items.
    when a sales order is created both header and sub items will have confirmation with different value between each and the same mismatched values are being passed in to delivery. But the deliveries can not be processed for PGI because of the mismatched confirmation qty between header and item level.
    I guess now you the rrequirment.
    So we are using the SAVE SALE ORDER exit which will re check the confirmed qty between header and item and takes lowest confirmed qty and change the confirmed quantities from all the line items to lowest one, so that confirmation qty among all the line items are same. This is the first logic we are planning.
    Further there is one more additional process BOP need to be run for this header and sub items, which will change the confirmed qty based on the latest stock for individual line item. even in this case also the user exit SAVE Sale order is being called but we need to run the availability check run additionally because of which our requirment will be taken care.
    Regards,
    Babs

  • User exit for sale order qty change

    Hi all,
    In our industry we are creating Sale Order for MTO Scenario by using T.Code VA01 . Most of the time after taking the MRP run and raising PO for BOM components, Users are changing the qty in the sale order . eg. and due to that it is becoming difficult to make necessary change in production programe. .Now please give me solution/ userexit  so that anybody cannot change the sale  order qty and it must be check the authorised userid to do necessary change in sale order.
    I am waiting for your valuable suggestion.
    Thanks & Regards

    Hi LIMAYE,
      You can use user exit include 'MV45AFZZ'.
    Make necessary changes in FORM USEREXIT_MOVE_FIELD_TO_VBAP.
    XVBAP will contain the old values before making the changes. You can comapare the quantity wtih VBAP field.

  • User exit name which triggers when a save button is pressed in cs01

    Hi Gurus,
    Can anybody tell me what is user exit which will trigger for a save button in tcode
    CS02
    Regards
    Yathish

    hi,
    Below are the list of user exits available
    for cs02.
    PCSD0001            Applications development R/3 BOMS                           
    <b>PCSD0002</b>            BOMs: Customer fields in item                               
    <b>PCSD0003  </b>          BOMs: Customer fields in header                             
    PCSD0004            BOM comparison                                              
    PCSD0005            BOMs: component check for material items                    
    PCSD0006            Mass changes user exit                                      
    PCSD0007            Check changes in STKO                                       
    PCSD0008            WBS BOM: Customer-specific explosion for creating           
    PCSD0009            Order/WBS BOM, determine URL page                           
    PCSD0010            Order/WBS BOM, determine explosion date                     
    PCSD0011            Knowledge-based order BOM, parallel update                  
    PCSD0012            Customer - Mat. number/mat. number during material change 
    PCSD0013            Customer-specific processing of an explosion for BOM rowser
    Hope this helps !!
    Cheers
    Alfred

  • User exit name which triggers when a save button is pressed in CJ20N

    Hi, does anyone knows which user exit is called when press the 'SAVE'  button in CJ20N transaction.
    Thanks

    hi,
    Below are the list of user exits available
    for cs02.
    PCSD0001            Applications development R/3 BOMS                           
    <b>PCSD0002</b>            BOMs: Customer fields in item                               
    <b>PCSD0003  </b>          BOMs: Customer fields in header                             
    PCSD0004            BOM comparison                                              
    PCSD0005            BOMs: component check for material items                    
    PCSD0006            Mass changes user exit                                      
    PCSD0007            Check changes in STKO                                       
    PCSD0008            WBS BOM: Customer-specific explosion for creating           
    PCSD0009            Order/WBS BOM, determine URL page                           
    PCSD0010            Order/WBS BOM, determine explosion date                     
    PCSD0011            Knowledge-based order BOM, parallel update                  
    PCSD0012            Customer - Mat. number/mat. number during material change 
    PCSD0013            Customer-specific processing of an explosion for BOM rowser
    Hope this helps !!
    Cheers
    Alfred

Maybe you are looking for

  • MacBook Freezing/ Turning Off

    hello all- Although I've been reading this site for a while, this is my first post- sorry about the length of this, but I want to be as clear as possible. I have a black MacBook Core Duo 2GHz, 1 GB Ram (512x2). I've had the computer for about 4 years

  • HT1267 My iphone 4s got jacked. I had insurance what should I do?

    k <Personal Information Edited by Host>

  • Problem while using:RSDRC_CUBE_DATA_GET

    Hi ,   I am extracting data from a basic infocube using fm :RSDRC_CUBE_DATA_GET . Unfortunately it is extracting the data from F-facttable only, and not extracting compressed data. Following are my selections in the function module. Please advice if

  • Schedule and Email a Report in 10gAs

    Hi all, I have a report in 10g. This report should run every 1st of every month automatically and the output in pdf has to be sent to some people via email. Provide me some documentation on this. Please help me,

  • Generic File Adapter Schema

    I am trying to pick up a .csv file that doesn't comform to a strict format, mainly because of human formatting errors in the file. I've tried to create a fixed length schema and a comma delimited schema but both fail as soon as they get a file that d