BOM WISE DELIVERY PLAN

hi ABAPers,
                     Plz help me to make this report whose
Input Fields are :
1. Delivery Date
2. Cylinder No.
Output Fields are :
1. BOM/PR Bought Out Parts
2. Item Description
3. Item Code
4. Vendor/Supplier
5. Planned Qty. as per M.R.P.-Run (Purchase Requistion Qty.) for every day
6. Actual Qty. as per PO Qty./Delivery Date for every day
7. Total Qty. and Total Value of Planned Qty. and Actual Qty. and total value according to per item price and qty.
plz provide me required tables and fields and any report similar to this report.
Thanks to All
Message was edited by:
        DEEPAK SOLANKI

Hi,
Check these tables.
RESB --->Reservation/dependent requirements
AFKO -
>Order header data PP orders
AFPO -
>Order item
MAST---->Material to BOM Link
STKO -
>BOM Header
STPO----->BOM item
Reward points if found helpful…..
Cheers,
Chandra Sekhar.

Similar Messages

  • SUPPLIER WISE DELIVERY PLAN

    hi ABAPers,
    Plz help me to make this report whose
    Input Fields are :
    1. Delivery Date
    2. Supplier
    Output Fields are :
    1. Item Group
    2. Item Description
    3. Item Code
    4. Planned Qty. as per PO for every day
    5. Actual Qty. as per delivered GRN ( Goods Reciept Number ) for every day
    6. Total Qty. and Total Value of Planned Qty. and Actual Qty. and total value according to per item price and qty.
    plz provide me required tables and fields and any report similar to this report.
    Thanks to All
    Message was edited by:
            DEEPAK SOLANKI

    Check with the table.
    LIKP  SD Document: Delivery Header Data
    LIPS  SD document: Delivery: Item data
    Regards,
    Maha

  • GRN wise delivery cost in MIRO

    Hi
    I have created a Purchase order for a raw material along with freight charges (this is paid to different Vendor) which is  maintained in the PO Level. I have done multiple GRN's for the same Purchase Order.
    When I am doing the invoice  verification for the same PO. I was trying to book the Planned delivery cost for this PO. I am able to see only single line item but where as i am unable to see it based on GRN. The GRN number is also not appearing in the reference field
    Requirement is: Based on number of GRN's the Planned delivery cost should be seen in MIRO. but where as i can see only one line. System is calculating on Po Level.
    If i am booking for goods and service i am able to see multiple line items
    pls help

    Planned delivery costs always appear as a single line item and not GRN wise.  
    Is your client Passing the delivery cost bills per GRN?
    If yes ,then One way to Get GRN wise details in MIRO , is by using the "Bill of Lading " number field that you see in MIGO. 
    If you capture the Bill of lading number in MIGO for each GR , then you can also do MIRO w.r.t Bill of lading number instead of the Purchase order. 
    Apart from the above, Im not aware of any other way to get GRN wise delivery cost details in MIRO.

  • Report  for bom wise target and actual cost as well as qty at line item

    Dear Experts,
    Is there any standard tcode for bom wise target and actual cost as well as qty at line item level for the month.
    there is one tcode s_alr_87013127 but user has to double click in order to get line item details.
    I want to see line item wise breakup/bom wise target and cost cost as well as qty.
    Thanks in advance.
    regards
    RK

    Dear experts,
    I am still looking for a revert.
    regards
    RK

  • Delivery Schedule Number or Delivery Plan Number field

    Hi,
    In MM which field refers to Delivery Schedule number (or Delivery Plan number)
    Advance Thanks
    Aadarsh

    Hi Sanjeev,
    Sorry. That is not the one. ETENR is of NUMC 4. But the field I am seeing is atleat 8 characters (maybe 10).
    I dont have any further information than the name given :
    Delivery Schedule Number or Delivery Plan Number field.
    I can further say to you that this is being used in Vendor Decleration
    Regards
    Aadarsh

  • Sales BOM Wise Stock report

    Dear Gurus,
    Good Afternoon!!
    My user' requirement is,
    he wants a BOM wise stock report.
    He will just enter the Header Item, Plant and the storage location,
    and system should list all its sub-items with the stock available in that plant & the storage location.
    PLease tell me if this is possible.
    Thanks & Regards

    Hi,
    As per my knowledge, don;t have std report for this requirement, but you can customise this, use below tables and let your ABAPer can develop own customised tcode
    MAST, STKO, STAS, STPO  - BOM table's
    MARD, MBEW, MCHB - Stock tables
    Regards,
    Sankaran

  • BOM wise stock report.

    Dear Gurus,
    Good Morning !!
    My user' requirement is,
    he wants a BOM wise stock report.
    He will just enter the Header Item, Plant and the storage location,
    and system should list all its sub-items with the stock available in that plant & the storage location.
    PLease tell me if this is possible.
    Thanks & Regards

    you may have to get a custom development done for this:
    If I understand coreectly, there are two major steps in this:
    1) Get the detailed BOM
        To do this, you may use teh data from transatcion CS03(display material BOM), or from CS13 (Display summarized BOM) based on teh requirement. You may have to read table like MAST/STKO/STPO. For summarized BOM, you may use the function module CS_BOM_EXPL_MAT_V2
    2) Get the available quantity
        If your requiremnt is simple with the avialable qty, you may get the read the unrestrcited qty availble in tables MARC and MARD for quantities of a materila/ sub-items at the plant and storage locations level respoectively. If the requiremnts is to get more poslished available stock, you may use the std availability check concept (where we specify whether other stocks like quality check, in transit, etc need to be considered, or not). In this case function module AVAILABILITY_CHECK may be used and teh paranmter may be material, plant, Checking rule, etc.
    Hope it helps.

  • How to enable end users to escalate requests outside of newScale - end user view of delivery plan

    How do you communicate to end users in a large organization, the procedures for escalation a request that is late or urgent. The views of the delivery plan available to users don't give them muche detail about who is doing the work.
    I'm curious how other people communicate the escalation procedures - per service - to the end users that submit them?  for instance, our unix admin team is pretty swamped and not meeting their OLAs reliably.  They want to provide a way for the Appdev/IT users to know how to escalate requests that are late and urgent/important. 
    When a user submits a unix admin service on a req, if the user knows where to look in myservices, they can see the delivery plan, but enough detail to know who is doing the work. (we submitted an enhancement request a while ago to provide an options for a "full disclosure" view of the delivery plan).   Even if they have enough access to service manager to find the req number and see the service manager view of the delivery plan, they still only see the service team/queue name, which might not be enough info for them to make a call or send an email.
    We are discussing a few options and was curious what others are doing:
    1.  Update the Service description to include a contact distribution list for the fulfillment team (for requests with simple plans) or the service owner team for complex delivery plans.
    2.  Create a custom email template to be sent at start of delivery plan.  Ccurrently we have a generic email that covers most requests, but are thinking of creating emails that provides service-specific escalation information. 
    3.  Create an intranet page with escalation information by service, and perhaps including this as a link off the myservice home page or the service description.  
     The scope of this question is more around infrastructure requests that are fulfilled by centralized groups, not how end users escalate phone or computer requests.  Our service-desk generally not involved in support of infrastructure requests, although they woudl probably be the escalation point for end-user requests
    -Brian
    running 2009.sp2

    create a CSI program (from ITIL) that will be empovered to fix the issues with Unix admins, ie hire more people.
    Dont fix process issues with technology, fix the process itself

  • BOM at delivery level

    Hi all,
    I have an issue. Is it possible to explode the BOM at delivery level with getting it exploded at sales order level?
    Sudha

    not get nay response.
    Thanks

  • How to create a Master delivery plan

    Hello,
    my question is how to create a Master delivery plan to my customers manuelly and how to setup up it for to be able to create automatically the production planning orders.
    Thank you kindly for you answers.

    Thank you so much, it is great.
    Just one more question, which requirements type i have to set up in requirements parameters if I want to plan it directly to customer (I want to see the customer in MD04)
    Thank you kindly for your answer

  • Submitting another request from a delivery plan

    At the end of a service delivery, I have a need to submit a different service request, copying across some field values etc.
    Sounds like using the API is only way, and I need to first call the getServiceDefinition to get service definition info such as version etc., and then call submitRequisition to submit the request.
    Has anyone done this before as part of a delivery plan of a service, and can you share what approach you took and any system/technical challenges? Do all within Service Link? Or have an external automation tool submit the new request?
    Any plans for product team to add some built in function to have a task to submit a new request?
    Thanks.

    Thanks Lim.
    I have tested the AuthenticationService API by providing my credentials and it was working fine by populating a part of my details in the person document as the response.
    So, I have provided my credentials as it is in the RequisitionService API which didn't work. The link which you have shared to me to generate the encrypted password didn't return any value. So, I will be checking with Cisco TAC Support for this as I am working with them already for the below response which I am getting though the directory integration is ON.
    I thought that I need to use this WebService in a ServiceLink agent. Since you have mentioned this as an API, I am assuming that I dont need to have a WSListener for a response using the RequisitionService API. Am I correct?
    The response error message I am getting while accessing the WS using SoapUI tool:
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
       <soap:Body>
          <soap:Fault>
             <faultcode>soap:Server</faultcode>
             <faultstring>The user name header is invalid. It is either not present or empty!. Please send a valid header.</faultstring>
             <detail>
                <RequisitionFault xmlns="http://requisition.api.newscale.com">
                   <errorCode>AUTH_0005</errorCode>
                   <errorMessage>The user name header is invalid. It is either not present or empty!. Please send a valid header.</errorMessage>
                </RequisitionFault>
             </detail>
          </soap:Fault>
       </soap:Body>
    </soap:Envelope>

  • DP BOM- How to Plan Dependent Demand with characteristic?

    Hi
    I am using DP BOM functionality.
    I have a following issue:
    Part A- 1 Lit  requires            -
    Demand Date:2014
    Part B -0.4 Lit    --- Age 4 years -
    Reqmt should be:2010
    Part C -0.6 Lit u2013 Age 3 years  -
    Reqmt should be :2011
    Can any one suggest me as to how will I get Dependent Demand with correct qty & correct month/year as per above example?
    Regards
    AR
    Edited by: Ashokan R on Jul 1, 2009 11:42 AM

    Hi,
    I think you can maintain planned delivery time (2 years) for your dependent demand in production location master data.
    -sapcrs

  • ATP check in va01 should consider BOM components delivery days for delivery date calculations of header material

    Hi All,
    My requirement is for ATP check in sales order,
    I am creating sales order for header material(FG) using strategy group 40.
    Its BOM consist 3-4 ROH, each ROH is assigned scheduling agreement.
    EX: I am creating order on todays date for FG
    IN-HOUSE production time = 5days, GR processing time = 1days
    transportation time = 5days.
    ROH 1= 1week, ROH 2= 2week, ROH 3 = 3weeks
    Now After MRP run for FG's, planned order will be created for deficit stock.
    now while doing ATP check in sales order system calculates delivery date = In-house production time + GR processing time + Transportation time.
    But components for manufacturing FG's are not considered .
    System should throw delivery date = In-house production time + GR processing time + Transportation time + components(ROH) delivery time (whichever is higher : As without this order delivery date is useless).
    Experts Please help.

    Pratik,
    In R/3 ATP check carried at one level material only for which you are entering schedule/delivery lines in sales order.
    If you are talking about cumulative availability check then please consider APO GATP.
    There is workaround for your requirement by considering Assemble to Order Strategies.
    Please go through below link Sales order availability check considering the ROH stock/procurement time
    Br
    KK

  • Sales Report by Sales BOM Wise

    Hi All,
    How to get a sales report which shows how many BOMs i have sold in a given period by customer wise and date wise?
    Thanks
    SV Reddy

    Hi Reddy,
    You have to analyse it in the sales analysis report based on the parent item or you want to know the child items qty as well. If yes then you need to customize your PLD for sales analysis report. Please assure me whether this sales BOM remains same or changes by time?
    Regards,
    /Siddiq

  • Alternate BOM explosion in planned order creation

    Dear Experts,
    We have maintained a alternate BOM 1 and 2 of a assembly which is defined as a Phantom (E-50). User wants a option of selecting the alternate BOM of this phantom assembly while creating the planned order of Header assembly. Is it possible?How?
    Thanking you,
    SR

    Dear Sachin,
    In my understanding it's not possible to select the different alternative BOM of a phantom assembly when creating the planned
    order for a header material.
    But give a try in this way,create 2 production version with different lot size or validity date for each laternative BOM and assign
    the value as 2 in BOM selection method in MRP4 view for the phantom assembly.
    Correct me if I'm wrong.
    Regards
    Mangalraj.S

Maybe you are looking for