BOM with Cross Selling

Hi Guru's
I have BOM material with 10 sub materials and i also want to have some 10 cross selling items with this BOM. i have configured all settings and in sales order cross selling logo coming but materials POP UP is not coming, when i click cross selling tab its not coming anything.
My question is whether BOM material can have Cross selling?? if yes wat iam missing.
Regards
Ramki

hi ram
As far as my knowledge goes we can have cross selling with a BOM .material but we cant do BOM with cross selling
Regards
Srinath

Similar Messages

Comparing prices for a BOM with selling and distribution price

Good day
I have been working on a query to bring information for a crystal report required by a client they want to compare the finished BOM with the selling price or distribution price of that BOM. I am not understanding a scenario where this BOM is sold to a particular BP price will definitely vary with BP depending on the terms and special prices. Can anyone help me enhance my query to have valuable results.
SELECT
Distinct T0.Father AS [BOM Product N0.],
T0.Code AS [BOM Item Component],
T2.ItemName AS [BOM Description],
T0.Quantity AS [Component Qty],
T0.Price AS [Comp Cost],
(Select (t3.Factor * t0.Price * t0.Quantity)
from OPLN t3
where t3.ListName = '1.selling price' ) [Selling Price],
(Select (t3.Factor * t0.Price * t0.Quantity)
from OPLN t3
where t3.ListName = '3.distPriceList' ) [Distribution Price],
T0.PriceList AS [Comp Price List],
T1.ListName AS [Price List Name],
T2.AvgPrice
FROM ITT1 T0
INNER JOIN OPLN T1
ON T0.PriceList = T1.ListNum
INNER JOIN OITM T2
ON T0.Code = T2.ItemCode
Where T2.ItmsGrpCod NOT IN (101,110,105)

Hi,
Special price is in OSPP / SPP1 /SPP2 tables. Check the table to find the link.
Thanks,
Gordon

Cross Selling and Sales BOMs as results

Hello,
We are expanding our use of Cross Selling. One of the requests is that cross selling return a list that includes items that are setup as Sales BOMs.
For example:
Cross selling is setup for:
Sales Org/DC/Division/Material
1000/01/01/ABC
Alternate Materials
AAA
BBB
CCC - CCC has a BOM with usage 5 and when entered on an order normally, it expands to items CCA and CCB.
Create an order and enter material ABC
Cross Selling shows with the three options above.
Add a qty of 1 for material CCC and copy it to the order
Item CCC is copied to the order, with the correct item category but does not then have the subitems of CCA and CCB.
Is there a way to make the item added via cross selling explode the sales bom, or will this not work? I know that BOM items cannot initiate cross selling, but wasn't aware it didn't work if it was a result of cross selling. Thank you.

Thank you for the response.
The item category is configured correctly, as the BOM does explode on the order correctly when entered manually, it only fails to add the sub-components when added as a result of the cross selling. The note you specified is not applicable to our system, we are currently on 4.7 and not upgrading to ECC6 until this summer.

In sales order cross selling pop up screen requires FIND option

Dear Friends,
In our company we are using the pop up screen for cross selling items per BOM.
Our requirement is in the pop up screen we require find option also. we have only copy and cancel options are there in the standard functionality.
Could any one of you help us how can add the functionality of find option with out changing any standard code, ( i mean any OSS notes or user exits ).
Thanks in advance,
NLX

Hi Joshi,
By seeing the above link, I think after creating transaction variant we need to create Custom tcode to use that transaction variant.
But, in this case we should use transaction VA01 only, but not any Custom Tcode..
This is very urgent ..
Is there any other option to meet my requirement...
Thanks,
Radhika

Cross selling

Hi everybody,
I got a problem about cross selling. I implemented every steps but still i can't get suggestion box while creating sales order. Where is the problem i couldn't find.
Note: I don't have item proposal..
I maintained procedure (sheama) and assigned cond.type to my procedure
I defined customer procedure "B" and document procedure "B"
Then i assigned my document type "B" and in customer master i determined pp customer sheama "B"
In VB41 with my condition type, i assigned 1907 to 374...
But in va01 transaction when i enter 1907 material i cant get suggestion box for 374 ????
If you can help me.... Thanks in advance...

Hi,
Your problem would surely be sorted out. Please check once again if you have maintained your Cross selling procedure and assigned it to your pricing procedure. Have your cross selling procedure assigned for your customer in the sales area data, and check if the conditions record are for that customer in VB42.
As Dhanekula said, check if you have the item category determination maintained for cross selling at VOV4 as
Sales doc type + Item cat group + Usage ( CSEL) + Higher level ( Tan) --- > Tan
Then finally check for the item you are proposing for cross selling is also not part of a free goods determination. Coz thats a limitation. A material participating in free goods cannot be sold for cross selling purpose.
Pl reward if it helps.
Thanks & Regards
Sadhu Kishore

Up/Cross Selling for sales ietsm in package quote

Dear experts,
We are using the package quote to do all our quoting and we have important requirement to be able to do up/cross selling with the package quote, at least for the sales items.
Do any of you know how this can be done with SAP? I am sure it would require an enhancement, but maybe someone have some hints on where to start.
Thanks and best regards, Mia

Hello Rumi,
The functionality of cross-selling with configuration is not provided and "strongly" excluded in the SD coding.
Please see include FV45PF0C_CROSS_SELL_SELECTION
*kein cross selling bei:                        (no cross selling by:)
Konfiguration                                 (configuration)
IF NOT VBAP-CUOBJ IS INITIAL.
    DA_GRUND = CHAR4.
ENDIF.
You can also find information on this in note 869601 - FAQ Cross Selling   > point 2.
It can only be made possible via modification.
Thanks
Amber

Why CROSS SELLING MATERIALSu201D pop up box appears ??

Dear Gurus,
Could you please help me out to resolve this issue ?
When entering u201CFreightu201D as a saleable item in a sales order, a u201CCROSS SELLING MATERIALSu201D pop up box appears. This happens for other numer of products as well.
Why it is coming up ? and how to get rid of it ?
Many thanks in advance for your help !!!!

Dear Ram ,
Thanks for the solution!!! It worked if I delete the second line
I have one doubt , If i delete assignment (second line) Is going to affect any other area or what would be the consequences ?
there are two lines
BP01 01 01 A A B00001 Cross selling
BP01 01 01 B B B00001 Cross selling***
and why it is happening with only some perticular materials ?? Plz explain.
Thanks in advance.
Edited by: Amod Vaidya on Nov 14, 2008 1:07 AM
Edited by: Amod Vaidya on Nov 14, 2008 1:47 AM

Cross selling stop when find a condition type

Hi everyone,
I'm trying to use cross selling to bring a pop up window and the user can select the material, the fields that I'm using are sales org, distrib. channel, division and material group, I already performed all the configuration and when I create the sales order the pop up window only show one material because found a condition type in the access sequence and is not performing the following validation...somebody know what could be happening?
Thanks in advance
Regards
Manuel

Hi,
you can use cross selling. When you create entries for condition CS01 (standard condition for cross selling) for a material, you start entering all materials that could be sold with that material. To do so, double click on the material and you’ll able to add additional ones and quantities. You can use a single acces sequence for condition CS01.
When creating a sales order, a pop up will appear and you can select the materials you want to cross sell by entering a quantity in the pop up (if no quantity, they’re not copied).
Regards,
JM

Problem Cross Selling - No condition record to find but material shows up

Hi!
I have a problem with one material which always pops up in the sales order - cross selling list but I cannot see the condition record (VB43). I do not want this material in the cross selling list, but how do I get it out?
Any advise would be appreciated.
Thanks,
Stefan

Hi Stefan,
please check note 869601:
1. Question: What options are there to create a Cross-Selling
    relationship between two or more materials?
    The SAP standard system provides two options:
       - Create a condition record using Transaction VB41.
       - Start the analysis run (report SDCRSL01) using Transaction
          SDVK. The companion sales analysis statistically determines a
          list with the double combinations of materials that are most
          common. You must specify the specified identifier as an
          attribute of the SD_DPP_CROSS_SELLING function module in the
          access sequence of the product proposal schema in Customizing.
hope this helps!

Can Cross selling items to be auto applied to a quote document

Is there standard SAP funtionality to auto apply cross selling items based on the document type? For example on a quote we would want the cross selling items to be automatically added to the quotation. At the time of sales order create (if not created with reference from quote) it would only propose the cross selling items.
Please advise if you have information on how to set up SAP to do this.
Thanks!

Hi Vicky,
We dont have such kind of setting in SAP system.for cross-selling system will display the items.
but for other concept "Dynamic product proposal" we have such kind of setting.in this process the system proposes the items which are frequently ordered by the customer.this will activate automatically like based on the order history the system proposes the items automatically into the order after entering the sold to party in order.
but we dont have any control for cross-selling.
Thank you

BOM with alternate unit of measure

Hello team
Is it possible to create the BOM with alternate unit of measure ?
Thanks
JJ

Hi,
Not possible to create BOM by item material with alt unit of measure.
If you want to use other UOM in production, use issue unit in work scheduling view.
If you want to procure use order unit in purchasing view.
For selling use sale unit in sales view.
Regards,
Dharma

How can i see Product praposal ( up / down selling , cross selling )

how can i see Product praposal ( up / down selling , cross selling ) in Winclient / Web client do we have to do any settings or not ? if Yes can someone please tell me how to do this ?

Hi Rakesh,
first you have to create upselling,downselling and cross selling master data for products.
Once done they will be seen in Webclient.
Best Regards,
Pratik Patel
<b>Reward with POints!</b>

Cross selling (one for pros)

Hi,
For me, one task I have left on my site is cross-selling
products on my detail page. Cross selling, for those who dont know,
is basically offering additional products that go well with the
products they already sought up in the detail page. For instance,
if they chose a flashlight, i might also want to offer them some
batteries of the right kind.
Anyways, the detail page works fine where the right product
apears by looking at the the variable productID in the URL.
Underneath I want to make an additional recordset (I guess this is
the best way) with 6 items that fit well with this product. How do
I do this? Do I need to make additional variables? How do I link
the right cross sell items to the product above which is already
linked from the master page?
What I am basically asking is some pointers to get me in the
right direction or even some more detailed ideas.
Thanks.

quote:
Originally posted by:
bregent
>well, i learned a lot more about asp and access.
Amazing how much one can learn in a month!
>So its now: products.ProductID --> (one to many)
crossell.productsID, crosssell.crossellproductID -->
>(one to many) products.ProductID.
That looks like you are on the right track. The relationship
looks fine, but in SQL you cannot reference the second instance of
the products table directly - you need to create an alias. An alias
in SQL is simply a virtual instance of the table.
You have a few options here and I don't recall if the DW
recordset GUI allows you to create an alias. But you should be able
to write the freehand sql directly. The SQL will look something
like:
SELECT Products.Product ID, Products_1.Product ID
FROM (Products INNER JOIN Crosssell ON Products.Product ID =
Crosssell.ProductID) INNER JOIN Products AS Products_1 ON
crosssell.crossSellProductID = Products_1.Product ID
Here we've created an alias of the Products table called
Products_1. (sidenote: your table names should be singular, not
plural. So, Products should be changed to Product)
Another option is to create a query in Access that links the
tables. Access will automatically create the alias for you if you
select a table more than once in a query. Then just reference the
Access query in your ASP page the same as you would a table.
Well, something is defenitly going right...and some stuff is
definetly still not okay :).
I think that we were successfull in creating a virtual
instance of something, when i test this sql I indeed get the two
test results that i entered in the crossell table. only, the
dreamweaver recordset now shows me two workable values:
recordset2.productID and then again recordset2.productID :). So, I
guess the productId's of both the detail page item is showing as is
the productID of the cross sell product, but necesarry stuff like
the price variable, name variable etc from the table products are
still missing which i do need.
what am i doing wrong?

Cross selling and upselling

Hi
Can I set up cross sell and upsell functionality in web UI?How can it be used in transactions like sales order?
Regards
Aakshi

Thank you for the response.
The item category is configured correctly, as the BOM does explode on the order correctly when entered manually, it only fails to add the sub-components when added as a result of the cross selling. The note you specified is not applicable to our system, we are currently on 4.7 and not upgrading to ECC6 until this summer.

Cross selling doubts about new developments

Hello to all
We have the materials joined so if we sell one material, you have to include in the same salers order two or more materials.
We are looking one solution with the cross selling but the problem is that the relationship has to have one parent material and one or more children materials. You should have to put the parent material in the sales order so the system gives you the children materials.
Ej:
Cross selling
Parent material: Table
Children materials: chair 1 and chair 2.
If I put table in the sales order, a popup windows appears reporting me that I can include chair 1 and chair 2 in the sales order but If I put chair 1, the popup window doesn´t appear. I would create the following cross selling relationship:
Parent material: chair 1
Children materials: chair 2 and table
and
Parent material: chair 2
Children materials: chair 1 and table
Our issue is that all the materials are parents, so it doesn´t matter what material you put in the sales order. The system would give you the rest of the parents materials. Is there any chance so I can put only one relationship and I can have the three relationships (wiht a user exits, bapis,...)
Thanks in advance.

Hi,
As per the Cross selling design you will have to enter the Parant and Child combination for each material. You may use the standard user exit available for the sales order and check the material in table KONDDP & KOTD011 (you may have differant table used in your cross selling procedure).
Regards,
Murali

BOM with Cross Selling

Similar Messages

Maybe you are looking for